Mac calendar (Mountain Lion) cannot accept an invitation with Exchange Server 2010
Hi all,
My boss are using Mac calendar (Mountain Lion) sync with his Exchange Server account, User sent him an invitation. When he tried to accept all invitations, an error message appear:
Your calendar couldn't be refreshed. There was an unexpercted error with the request (domain EWSExchangeWebServicesErrorDoma / error 285)
Could anyone help me to solve?
Thanks
Started experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this.
Similar Messages
-
Mac Calendar (Mountain Lion) cannot save to Exchange Server
Hi All,
My boss use iMac Calendar (Mac OS 7.8) to sync with Exchange Server. When he saves the modify to Exchange server, There following message appear :
Calendar can't save the event "xxxxxxx" to the Exchange server. The account "Exchange Server" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
This message is randomly. However, iPhone, iPad and MS Outlook without that issue.
Could anyone help to solve?
thanksStarted experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this. -
All sub-folders in Mac Mail cannot synchronize with Exchange Server 2010
Hi all,
All sub-folders under Inbox in Mac Mail cannot be synchronized with Exchange Server 2010. There are 2GB messages size in Inbox folder and 500MB messages size under Inbox's sub-folders. All messages can be sent out and received and it can work in Outlook 2007 and Outlook 2010 normally. However, all messages in sub-folders cannot be synchronized (empty sub-folders).
Does this problem relate to message synchronization order of Mac Mail with Exchange Server? Do all sub-folders messages be synchronized after synchronization complete of Inbox? The synchronization of sub-folders will not happen if the synchronization of Inbox does not complete, doesn't it?
All messages synchronization is over internet. Can anybody help?
Thanks a lot
DT1640759Hi,
1.please check the mailbox send and receive quota for exchange 2013 migrated mailbox.
2.Please check the email attributes of the exchange 2013 migrated mailbox because it seems to be a problem with that particular mailbox.
3.Then do the message tracking and that would be the only way to find the where the send messages has gone.
4.Please check and confirm you have an enough space on the disk where exchange queue database is residing.
I think I need to create a receive connector in the 2013 to receive from 2010 ?
No need ,by design exchange 2013 cas server default frontend receive connector will be having an
entire ipv4 and ipv6 segment and anonymous connection is checked by default.
I think I also need to create a send and receive connector for 2013 users to each other?
No need , an intra organisation send connector and the default receive connectors in exchange will be used
for internal mail flow between the exchange 2013 users.
Please reply me if you have any queries .
Regards
S.Nithyanandham
Thanks S.Nithyanandham -
Use Different mailbox or same mailbox if setup two accepted domains in one Exchange Server 2010
Hi,
I want to know if I setup two accepted domain in one Exchange Server 2010, will it have another mailbox or use same mailbox?Hi,
Based on my knowledge, to add a new name in the accepted domain list is to add a SMTP address suffix for the mailboxes. Thus, it uses the same mailbox if you setup two accepted domain in one Exchange Server 2010.
If you have any question, please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support -
Mac Reminder (Mountain Lion) cannot sync with Exchange Server 2010
Hi All,
My boss is using iMac reminder (Mountain Lion), iPhone and iPad sync with his Exchange Server account, He cannot sync Mac reminder with Exchange Server last week. However, there are no sync problem of iPhone, iPad and the other iMac.
My boss mail to me 'Just noticed that my iMac reminder is not in sync with the server. IOS device is in sync though. Tried unchecking calendar+reminder on account setup and rechecking but still no good. Any ideas?'
Could anyone help me?
Thanks,Started experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this. -
Mac performance with Exchange Server 2010 SP1
Hi All,
I have some issue with Mac OS X 10.7.2 performance with when setting up new email connection Microsoft Exchange Server.
1) Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover. Note how long it takes. In my case, it takes almost two full minutes or more until it comes back and is fully set up (and starts synchronizing the server folders).
2) Now use Apple mail create a new EMAIL account MANUALLY -- just don't fill in the password... keep hitting Continue until it shows the POP setting. Select EXCHANGE and then fill in the appropriate details (mail.mydmain.com, check SSL enabled, etc.). Setting up an account this way takes only a few seconds.
3) Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover. it takes few second to completed.
I can summarize that:
- Use Apple Mail to create a new EMAIL account for an Exchange Account using Auto discover: Slow
- Use Apple mail create a new EMAIL account MANUALLY: Normal
- Use Microsoft Outlook 2011 for mac to create new Email account for an Exchange using Auto discover: Normal
In any case, do you have any solution to fix this issue.Hi,
I'd like to know how did you set "send on behalf",from outlook give delegation permission or from Exchange Server give "send as" right?
Please try to use get-adpermission to verify if the user has "send as" right.
Manage Send As Permissions for a Mailbox
http://technet.microsoft.com/en-us/library/bb676368.aspx
Note: After you grant send as right, please try to restart Microsoft Information Store.
By the way, do you receive any NDR or error information when you send on behalf of others?
Xiu -
Mac OS X Lion - Cannot Rename Project Files with Search Filter Applied !
Hi...
as the header says...
I wanted to rename 6 Clips of 777 and entered the search string... In my case, GolfBag.
I wanted to rename them.
They were spread out between 777 clips so looking for them individually was not viable, so I entered a search string,
they popped up nicely in the project panel as expected only I could NOT rename them not even by right-clicking them and selecting 'rename' from the context menu.
I tried saving the project and re-opening it but that did not help.
I tried creating a new project from scratch to make sure the project had not currupted. But there I found the same problem...
Could any of you shed some light on this ' I dont think to be interpreted as a feature '
Thanksgek5 wrote:
There is no disk utility on the thumb drive.the problem is that i cant open anything on the thumb drive.
Did you read my post?
("are you booting from the USB? (Hold the option key on Boot") -
Mac OS Mountain Lion 10.8.3 suddenly became extremely slow, need help!
Hi everybody!
I need help with my Mac OS Mountain Lion.
Was working fine with it since it got released, but yesterday suddenly it became exteremely slow. It literally thinks for 20 minutes on any operation I'm trying to do, showing me the loading spin icon. Screen freezes, everything is not responsive at all and I just have to wait for ages till something is moved a bit and then it thinks again.
I don't see anything in particular in the logs. CPU load is low, memory using is low, all temperatures are fine. I even cleaned up the stuff with CleanMyMac app, didn't help.
Checked the hard drive with Disk Utility - didn't help either.
Please help, I'm hopeless and out of ideas what's wrong with it.
ThanksFirst, back up all data immediately, as your boot drive might be failing, regardless of SMART status or anything else.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have just up graded my i mac to Mountain Lion and now cannot open my e mails in entourage or my word documents. What do I do to get them back?
It looks like you have Office 2004, which doesn't run on Mountain Lion. Upgrade to Office 2008 or 2011.
-
I upgraded my 2009 Mac to Mountain Lion yesterday but cannot add photos from my iPhoto library to contacts anymore. Drop down menu only shows "default, recent and camera" but I cannot get to iPhoto library. Help stated to choose Faces but I don't even get that far. How do I fix. Still works on iPad but not on Mac.
When you have iPhoto and Contacts open and try to drag a picture for iPhoto to the Contacts photo frame do you get a + symbol? if not you should! from there the the pop menu should appear and then you can select the picture and click on done
Sample movie on how to -
I have a Mac with Mountain Lion and a MacBook Pro with Maverick. Since I synced the calendar to icloud, I get a "upgrading iCal calendar" that won't go away. How do you fix this?
Try force quitting iCal by pressing Option-Command-Esc, selecting iCal and clicking Force Quit.
-
I have both Mac OS Mountain Lion and Windows 8.1 32-bit installed....The machine is Macbook Mid 2009...Whatever i do i can't install and use bootcamp on the Windows side.........Apple Support says it only supports Windows 64-bit which my machine cannot install.......and when i tried to install Bootcamp 4 it says it only supports Windows 7 .........Is there no way to install and use Bootcamp without buying another computer?
Boot Camp - Apple Support
Boot Camp- System requirements for Microsoft Windows operating systems -
What Macs will mountain lion support
What Macs will mountain lion support
Looks like Apple has a five year shelf life built into it's computers as far as OS compatability is concerned. Guess I better start saving up for a 2014 Mini.
It depends on your perspective - if you consider "shelf life" as the amount of time before a computer will no longer accept new OS releases, that is one way to look at it. However, if you consider that the computer is still viable for a long time after its last eligible update, its useful life is a lot longer than just five years. I have been getting about ten years of useful economic life of every Mac I've ever bought and I think that's pretty reasonable (they all eventually get the maximum RAM and bigger hard disks).
Put another way, a 2007 Mini is every bit as useful as the day you bought it. I think it is more reasonable to expect you will not feel its age until about 2017.
It is also nothing new with Macs... they have all averaged five or six years of "upgradability" since the very first one in 1984. Eventually the OS has to evolve. -
HT5639 os x mountain lion cannot be installed in machintosh HD ?
Please help me... im getting this message "os x mountain lion cannot be installed in machintosh HD"... how can i install it?... thank you so much in advance!!!
are you trying to install windows on your mac?
if not then think you should try asking for help here
https://discussions.apple.com/community/mac_os/os_x_mountain_lion -
I have accepted iCal invitations with repeating events and they have since been deleted from the iCal on my Mac but won't delete from my iPhone. Help
I experienced this issue as well.
Background:
I had opened an ICS attachment for a repeating event on my iPhone, which added the item to my phone's calendar. I did not have the option to delete the calendar entry from my phone, and the item did not appear on the calendar on my Mac. My phone is currently running iOS 7 (but the problem began quite awhile ago; I don't recall which version of iOS was installed when it started).
Solution (summary):
Create a new calendar, move the items that you wish to delete to the new calendar, then delete the new calendar
Solution (detailed steps):
Create a new calendar
On your phone, open the calendar app
Tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Scroll to the bottom of the list and tap the "Add Calendar..." option
Give your new calendar a good name, such as "Delete me"
Tap "Done" in the top right corner to save the new calendar
Tap "Done" in the top left corner to finish editing the list of calendars
Tap "Done" to exit the list of calendars
Assign all calendar entries that you wish to delete to the calendar you created in step 1
Tap a calendar entry that you wish to delete
Tap the "Edit" button in the top right corner
Scroll down until you see the Calendar field (on an iPhone or iPod it's usually just below the bottom of the screen), then tap the Calendar field to bring up the list of available calendars
Tap the name of the calendar that you created in step 1 (e.g. "Delete me"); the screen should return to the main calendar entry page
Tap "Done" in the top right corner of the screen. You may need to then tap the "< Day" button on the top left of the screen to return to the main calendar view
Repeat the instructions in step 2 for each of the calendar entries that you wish to delete
Delete the calendar that you created in step 2 (this will delete all calendar entries assigned to this calendar)
From the main screen in the calendar app, tap the "Calendars" option at the bottom of the screen
Tap the "Edit" button in the top left corner
Tap the entry for the calendar that you created in step 2 (e.g. "Delete me")
Scroll to the bottom of the scren and tap the "Delete Calendar" option. You should be prompted with a warning that explains that "All events associated with this calendar will also be deleted."
If you're sure that the only items on this calendar are items that you wish to delete, tap the "Delete Calendar" button
Tap "Done" in the top right corner to exit the Edit Calendars screen
Tap "Done" to exit the list of calendars. You should now be back at the main view of the calendars app
Rejoice, your pesky repeating calendar events have been deleted
At this point all of the items that you assigned to the deleted calendar should be gone
Repeat the steps above for any entries that you missed
Post another message to this thread if this did not resolve your problem
minor edit for clarity made by ScottHooley
Maybe you are looking for
-
How can i boot my mac properly?
I am this troble with my macbook, when I started it up, it usally showing the logo of the apple and a loading gear, and mine does the same but the only thing i can't understand is that it takes a lot of time to load, maybe 10 to 20 minutes. And after
-
not sure if this is an ical or imal problem. It appears there is some type of handshaking problem between them. I can enter and invitee address and hit send...A pop up window shows, I hit the canel option, the window closes and that is it. If I wi
-
My toolbar, search bo and bookmarks bars vanished, FF 18.02, Mac OS 10.6.8
my top two toolbars vanished. I cannot manually enter a URL, when I get a new tab I am unable to enter anything. If I want to run a search I have to go to Google in history, the select search. Are you trying to run users to another browser?
-
Sync Problem - "There is a problem with this drive. Scan the drive now and fix it".
Have new desktop computer with Windows 8.When I connect my iPod to my computer to sync, I get the message – "There is a problem with this drive. Scan the drive now and fix it". It is identifying the drive on the iPod as the problem. iPod works fine o
-
My zen neeon is stuck on the recharging screen. I've tried formatting, didn't do a thing. I downloaded the firmware update, but it wont install, it keeps losing the connection. Anyone have any ideas?