Mac can't see HD when booting from CD
I just bought a used Powermac G4(MDD) single core 1.25Ghz w/256Mb of ram and an 80Gb HD from a school sale and decided to reinstall OS 10.0.3. When I finally got the installer to come up(after numerous kernal panics) it couldn't see my HD. Booting w/9.2 disc didn't do it either so I moved my system folder to my flash drive and attempted to boot off of it. It then saw the HD and I initialized it and did the write zeros thing and still nothing. I replaced the HD but quickly found no conventional means to format it seeing as it couldn't see that one either period and I could find no third-party programs to do so. I'm not inexperienced as far as technology goes as I am a computer technician but I know fairly little about Macs and bought this to see what all the hype is about. So far it's been fairly disappointing:(
I'm sure a working one is much more enthralling:) Anyway...any input would be most appreciated. Thanks!
Thanks for the help.
I've tried the disk utilites..none of them can see the drive while I'm booting off the CD and the system profiler can't see it either. The software I'm using didn't come w/my Mac, I got it randomly when I bought it out of a box of software. I assumed that any OS disk would work with any Mac(excluding system requirements). Do I need to buy a new copy or is it my Mac? Where is this list of minimum OS's or each Mac? That could be the problem as I'm using OS 9.2.2 and OS 10.1.3. I'm not going to upgrade my system as I just wanna play with it and learn what's apparently so great about Macs.
Similar Messages
-
Why won't DiskWarrior boot up my mac? (no entry sign when booting from DW)
I get a "no entry" sign (black circle with a diagonal line through it" when I try to boot from the DW dvd. I'm not sure which type of macbook I have but it was bought in January 2007, and before my file system got corrupted my OS was 10.4.11 . I can boot perfectly find from a Data Rescue 3 DVD (and have already used this to backup all my files) and from the OS X install DVD, so why am I getting this error when booting from DiskWarrior? The apple sign appears and the cog spins for a minute or two and then the no entry sign comes up and stays there...
It's DiskWarrior 4.2.is this a disc which was mailed to you or one you burned? sometimes their downloaded "upgrades" are just for install only, you have to contact them for the disc...
if this is suppose to be a genuine boot disc, it could just be a bad burn. the boot DVDs should be apple partition map. -
HT5500 can't see contacts when viewed from home pc
I've set up icloud on my iphone and my pc at home but i can't see any of my contacts when I view using icloud from my home pc
I've used the general trouble shooting guide and everything looks like its set up ok, all my contacts are there in my phone and I did the back up also
Any idea's on this?Yes I believe that's why you don't see them. You can prove this by tapping the work email groups so they are unchecked (so only iCloud is checked), then tap Done. If you don't see any contacts, it means that they all belong to your work account.
To copy them to iCloud, you would do the following:
Go to Settings>Mail,Contacts,Calendars>Default Account (in the Contacts section) and select iCloud as your default account.
Download the app My Contacts Backup from the App store on your phone. (You will need the "Pro" version if you have 500 or more contacts).
Use the app to back up your contacts as an attachment to an email. Send this email to yourself.
After receiving the email, open it on your phone and tap the attachment to re-import them to your phone. They will be imported to iCloud as you have selected that as your default in step 1.
Check icloud.com to confirm that they are there.
You will see duplicates on your phone since you have copies of your contacts in your exchange account groups and your icloud group. You can hide the duplicates from view by opening contacts, tapping Groups, then tap to uncheck either your exchange groups or your icloud group, then tap Done.
If you want new contacts created on your phone to be added to your exchange account rather than your iCloud account, go back to Settings>Mail,Contacts,Calendars>Default Account (in the contacts section) and change it back to your exchange account again. If you want new contacts to be created in iCloud, just leave your settings as they are.
You should now have a copy of your contacts in your iCloud account (visable on icloud.com). You can also use the app to back up your contacts at any time and save the attachment on your computer as a backup. -
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over. -
Can't get ibook to boot from external harddrive when hitting option key
Hello,
After owning a Pismo Powerbook that had it's hardrive replaced --twice--, i'm all about backing my shtuff up for my ibook.
I picked up a Lacie d2 external harddrive today, and used Disk Utility's Restore function to copy everything from the ibook to the drive. I can boot off the Lacie without a problem when I select it as the startup disk from sys preferences.
But I can't get it to boot from the Lacie when I depress the Option key while rebooting or starting.
any suggestions?
ibook g4 933 Mac OS X (10.4.6)Let's be sure you are doing it correctly:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the desired boot drive (you will have to wait about 20 seconds before you can make the selection) then click on the large right arrow button. If this is what you are doing and it does not work, then you may need to re-prep the external drive and re-clone.
1. Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
After the above re-clone as follows:
1. Open Disk Utility from the Utilities folder.
2. Select the startup volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup volume to the Source entry field.
5. Select the backup volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
7. Double-check you got it right, then click on the Restore button. -
how do i delete old apps from my icloud? I can still see them when i go to not on this device, and I don't want them there anymore.
Remove documents from iCloud
You can remove documents stored in iCloud by deleting them from any of your devices that have iCloud set up for Documents & Data. Removing your documents from iCloud reduces the amount of iCloud storage space you’re using.
Remove iCloud documents from your iOS device
Go to Settings > iCloud > Storage & Backup > Manage Storage.
Under Documents & Data, tap the app that has a document you want to delete, then tap Edit.
Remove iCloud documents from your Mac
Open iCloud preferences, then click Manage.
Select an app on the left, then select one or more documents on the right.
Click Delete (below the list of apps).
You can also remove documents from iCloud by moving them to your Mac with OS X v10.8 or later. For instructions, use go to the Finder on your Mac, choose Help > Help Center, then search for “save documents.” -
No Harddrive when booting from OS 9.2.1 CD on G4 MDD 1.25 Dual
I also have a G4, 1.25 GHz dual processor running OS X 10.2.8 and 9.2.1 updated to 9.2.2, 1 GB RAM.
When booting from OS 9.2.1 CD (came with the computer) I do not see any harddrive. Need to reinstall OS 9 for some classic applications.
Drivesetup can not find any disc to format.
Any idea?
PowerBook G3/400 Mac OS X (10.3.9)Hi, kai -
Welcome to Apple's Discussions.
An OS 9-bootable G4 MDD model requires OS 9.2.2 as the minimum OS. Apparently some models of G4's which require OS 9.2.2 can in fact boot to some OS 9.2.1 Install CDs, but that is all - they can not run the installer or do much else.
Your G4 MDD model originally shipped with a combo set of install disks; none shipped originally with a separate OS 9 Install CD (the last G4's to do so were QuickSilver models). You can ise that set of disks to re-install OS 9 (Classic).
One or more of these Apple KBase articles may help you do that -
Article #106294 - Mac OS X: How to reinstall Mac OS 9
Article #107383 - Mac OS X 10.2, 10.3: How to perform Mac OS 9 clean installation with Restore CDs
Article #42929 - Using Restore Discs with Mac OS X 10.2 or later
There can also be an issue with what bus a hard drive is on. As I understand it, in order see a hard drive on the ATA/100 bus on a G4 MDD model when booted to an OS 9 Install CD, the System Folder on the CD must contain the file Mac OS ROM in version 9.5.1 or later. No OS 9.2.1 Install CD (or earlier version) contains that file version. -
Ethernet seems to work when booted from Leopard DVD--Not anytime else
Ok. Here is the deal. iMac G5 connected via ethernet cable to router. It will not connect. The airport works fine. I unplug the same cable and plug into macbook pro--it works just fine. Plug it back into iMac.
In network utilities when booted from the disk--I can ping away just fine. So--in network preferences when I boot it up again I attempt to put the IP address, subnet, router yada yada yada in manually and after about twenty five seconds of the program chewing on it--it crashes. Over and over again. Airport works just fine. PowerBook and Mac Pro connected to same network---all check out.
Any thoughts?Hi,
The internet port is meant for modem, and ports 1,2,3,4 are meant for computers.
After making proper connections reset router for 1 minute, and rebbot it.
Now run easy connect program for configuring router. -
Error Message when booting from System CD's
Ill advised I put a OSX disk in my hardly used iMac CRT G4 with 64meg of RAM. I did not know about the firmware upgrade required. Discovering my error I tried to use the System Recovery / Install CDs that came with the machine.
When booting from the CD all goes well until about 50% into the boot and then the following error appears on the screen
interfaceLib -- MgmError with a button to reboot the machine and make sure that the C button is held down on the keyboard. BUT the mac is trying to boot from the CD. Holding down the C button makes no difference. Holding down the shift key (preventing the extentions) gets past the error BUT the system restore or system install programs will not run.
Help! I am really stuckNot only were you suppose to update your firmware, you also needed to purchase more RAM. The minimum RAM requirement for OS X is 128mb. However, Cat System users strongly recommend 256mb+.
Suggest you check out the following links & see the section on "Tray Loaders".
iMac (CRT) (FAQ)>
User-Contributed Tips & Answers>Fixing iMac(CRT) firmware/OS X problems
Firmware Problem Solver Thanks to Giles Kennedy.
Good luck. -
No external disk encryption available when booted from Lion installer
Problem: When booting my Mac Mini from a Lion Installer USB thumb drive, Neither Disk Utility nor diskutil from the command line seems able to actually encrypt an external drive. They both seem to be able to convert the drives to coreStorage, just not actually encrypt the drives.
Background: I was able to successfully preform 3 encryptions from the Lion system on my 17inch MacBook Pro before failing as described above:
1) I encrypted my main HD in my laptop (using System Preferences > Security & Privacy)
2) I encrypted my Time Machine backup (Using Time Machine system prefs)
3) I converted an external 2TB USB drive filled with data (I had a freshly mirrored copy of all this data as backup) using diskutil cs convert -passphrase from the command line
each of the successful encryptions took about 24hours/Terabyte
Here is where I tried and failed, step by step:
### Failure 1
I created a bootable backup of Mac OS X Lion on a USB thumb drive. I booted my Mac Mini with it and attached a 2TB external USB drive that I wanted to encrypt. It was a blank drive so I launched Disk Utility from the recovery/installer screen and created 1 partion, GUID, Mac OS Extended (Journaled)
Then I went to the Erase tab and chose Mac OS Extended (Journaled, Encrypted), provided a passphrase and erased. It took just a couple seconds and said it was done.
I moved the 2TB external to my laptop running Lion, it asked for the passphrase and when provided the drive mounted just fine but when examined with "diskutil coreStorage list" I see a couple problems (besides the fact I don't believe it encrypted a 2TB drive in 15 seconds)
Conversion Status is NoConversion and it's not listed as revertible - my successful encryptions are listed as "Conversion Status: Complete and Revertible: Yes (unlock and decryption required)"
+-> Logical Volume Family 83A8BED0-EA17-433B-B494-B71D9B16142C
Sequence: 2
Encryption Status: Unlocked
Encryption Type: AES-XTS
Encryption Context: Present
Conversion Status: NoConversion
Has Encrypted Extents: Yes
Conversion Direction: -none-
|
+-> Logical Volume FD9868AA-C880-475A-8AFE-98DFCED1A0B4
Disk: disk8
Status: Online
Sequence: 2
Size (Total): 1999903956992 B (2.0 TB)
Size (Converted): -none-
Revertible: No
LV Name: 2011-07-24
Volume Name: 2011-07-24
Content Hint: Apple_HFS
### Failure 2
Still booted from thumb drive installer, I attached a 1TB Firewire drive with files on it (it is a mirrored copy of an original drive) and l launched Terminal and attempted to use "diskutil cs convert /Volumes/mydrivec -passphrase" to encrypt the drive without erasing it first. Again it seemed to work, it went thru the corestorage step and when mounted on my laptop running Lion I'm asked for the passphrase and it mounts and the files are all fine but again it finished in seconds instead of the 24 hours I was expecting, and diskutil cs list shows a conversion status of "converting" but no progress is being shown in Size (Converted) or Conversion Direction and Revertible says no decryption required
> Logical Volume Family A54F382A-54A0-4295-B3A8-1CA0E92341C4
| ----------------------------------------------------------
| Sequence: 4
| Encryption Status: Unlocked
| Encryption Type: AES-XTS
| Encryption Context: Present
| Conversion Status: Converting
| Has Encrypted Extents: Yes
| Conversion Direction: -none-
| |
| +-> Logical Volume C6AFB536-3C5F-48D0-A590-BD6883A4D763
| ---------------------------------------------------
| Disk: disk7
| Status: Online
| Sequence: 4
| Size (Total): 999542140928 B (999.5 GB)
| Size (Converted): -none-
| Revertible: Yes (no decryption required)
Thoughts on why I'm not getting actual encryption when booted from Lion installer thumb drive? I don't want to upgrade the Mini to Lion (yet), I just want to boot it up from Lion installer and use it as an encryption station for a week.Problem: When booting my Mac Mini from a Lion Installer USB thumb drive, Neither Disk Utility nor diskutil from the command line seems able to actually encrypt an external drive. They both seem to be able to convert the drives to coreStorage, just not actually encrypt the drives.
Background: I was able to successfully preform 3 encryptions from the Lion system on my 17inch MacBook Pro before failing as described above:
1) I encrypted my main HD in my laptop (using System Preferences > Security & Privacy)
2) I encrypted my Time Machine backup (Using Time Machine system prefs)
3) I converted an external 2TB USB drive filled with data (I had a freshly mirrored copy of all this data as backup) using diskutil cs convert -passphrase from the command line
each of the successful encryptions took about 24hours/Terabyte
Here is where I tried and failed, step by step:
### Failure 1
I created a bootable backup of Mac OS X Lion on a USB thumb drive. I booted my Mac Mini with it and attached a 2TB external USB drive that I wanted to encrypt. It was a blank drive so I launched Disk Utility from the recovery/installer screen and created 1 partion, GUID, Mac OS Extended (Journaled)
Then I went to the Erase tab and chose Mac OS Extended (Journaled, Encrypted), provided a passphrase and erased. It took just a couple seconds and said it was done.
I moved the 2TB external to my laptop running Lion, it asked for the passphrase and when provided the drive mounted just fine but when examined with "diskutil coreStorage list" I see a couple problems (besides the fact I don't believe it encrypted a 2TB drive in 15 seconds)
Conversion Status is NoConversion and it's not listed as revertible - my successful encryptions are listed as "Conversion Status: Complete and Revertible: Yes (unlock and decryption required)"
+-> Logical Volume Family 83A8BED0-EA17-433B-B494-B71D9B16142C
Sequence: 2
Encryption Status: Unlocked
Encryption Type: AES-XTS
Encryption Context: Present
Conversion Status: NoConversion
Has Encrypted Extents: Yes
Conversion Direction: -none-
|
+-> Logical Volume FD9868AA-C880-475A-8AFE-98DFCED1A0B4
Disk: disk8
Status: Online
Sequence: 2
Size (Total): 1999903956992 B (2.0 TB)
Size (Converted): -none-
Revertible: No
LV Name: 2011-07-24
Volume Name: 2011-07-24
Content Hint: Apple_HFS
### Failure 2
Still booted from thumb drive installer, I attached a 1TB Firewire drive with files on it (it is a mirrored copy of an original drive) and l launched Terminal and attempted to use "diskutil cs convert /Volumes/mydrivec -passphrase" to encrypt the drive without erasing it first. Again it seemed to work, it went thru the corestorage step and when mounted on my laptop running Lion I'm asked for the passphrase and it mounts and the files are all fine but again it finished in seconds instead of the 24 hours I was expecting, and diskutil cs list shows a conversion status of "converting" but no progress is being shown in Size (Converted) or Conversion Direction and Revertible says no decryption required
> Logical Volume Family A54F382A-54A0-4295-B3A8-1CA0E92341C4
| ----------------------------------------------------------
| Sequence: 4
| Encryption Status: Unlocked
| Encryption Type: AES-XTS
| Encryption Context: Present
| Conversion Status: Converting
| Has Encrypted Extents: Yes
| Conversion Direction: -none-
| |
| +-> Logical Volume C6AFB536-3C5F-48D0-A590-BD6883A4D763
| ---------------------------------------------------
| Disk: disk7
| Status: Online
| Sequence: 4
| Size (Total): 999542140928 B (999.5 GB)
| Size (Converted): -none-
| Revertible: Yes (no decryption required)
Thoughts on why I'm not getting actual encryption when booted from Lion installer thumb drive? I don't want to upgrade the Mini to Lion (yet), I just want to boot it up from Lion installer and use it as an encryption station for a week. -
G5 Grey screen (Kernel Panic) when booting from CD
I know there are a lot of posts with people experiencing issues with the grey screen during boot. Most resolutions point to hardware but all state, including Apple's walk through, to boot from CD and run a validation on the hard drive.
My issue is completely different. I get the grey screen of death when booting from a CD/DVD only. I can boot into the OS just fine from the hard drive. But if I try to install another OS, or just boot from the CD/DVD, I get the grey screen.
What I've done to troubleshoot:
Reduced RAM to original sticks
Removed hard drive
Replaced DVD drive
Tried multiple versions of OS discs (10.2, 10.3, 10.4 and 10.4 server)
Reset the PRAM (Both via keyboard and Open Firmware)
Replaced the video card
Replaced the logic board
Replaced the Processor
Quite litterally the only thing original in this system is the power supply and the memory. However, I only get it when I'm booting from CD so the memory should not be the issue. I've even used a seperate power supply for the DVD drive to see if it was causing an issue.
Any suggestions? I'm looking at possibly replacing the power supply but I'm afraid it's going to give me the same issue.Thats the thing, I've tried 10.2, 10.3, 10.4, and 10.4 server. (CD and DVD) All give me the grey screen. Well 10.2 and 10.3 give me a dark grey square in the middle where the apple should be but then the fans ramp up like it does when you get the grey screen of death.
I've also used two different drives.
It reads the disks fine with no issues. If I boot to the hard drive I can use the system like nothing is wrong. But if I want to boot from CD for any reason I cannot.
If I follow the logic it seems it is something to do with the CD/DVD drive. This is because it works fine when booted to hard drive. If it was the memory or PSU then I'd be getting the problem all of the time and not just when booting from CD/DVD. -
[RESOLVED] "Isolinux.bin missing or corrupt" when booting from USB.
Just giving root cause explanation and resolution to closed topic:
https://bbs.archlinux.org/viewtopic.php?id=107241
where "Isolinux.bin missing or corrupt" when booting from USB. I hope maybe someone will find it rather than closed topic 107241 :-(
Windows DD and unetbootin-windows are created for single ISO partition. That's why old Archlinux like 2010-05 will run.
The newest one archlinux-2014.01.05-dual.iso will not work like that because there is UEFI pre-boot (two partitions). That's why it can't find then Isolinux.bin and report it's missing. Of course this kind of issue will appear on old motherboard without / old UEFI support as they can't understand bootstrap and real root fs later.
unetbootin tool is partition driven so it can't do split well 32 UEFI + remaining root.
Resolution:
If you really don't have any Linux based machine to use Linux DD there is work around:
1. Install WIndows Virutalbox and extension pack
2. Download latest Archlinux ISO and run VM from it + USB support map real pendrive
3. In guest VM booted form Arch ISO just run DD if=/dev/sr0 of=/dev/sda (pay attention that SDA is real USB device then).
4. Wait about 8minutes. halt. unplug usb. Voila.
Last edited by varsovie (2014-01-15 22:20:37)I am having this exact problem but with dd on Ubuntu 12.04 (my main distro on my main machine).
Perhaps my version of dd is too old? -
My mac can not see my iphone on airdrop! How can I fix it?
My mac can not see my iphone on airdrop! How can I fix it?
Hello Alexandre.alds,
I'm sorry to hear you are having these issues with AirDrop on your devices. If you are having issues seeing other devices in AirDrop, you may want to double-check the steps and requirements outlined in the following articles:
Using AirDrop with OS X Lion, Mountain Lion or Mavericks - Apple Support
Share content with AirDrop from your iPhone, iPad, or iPod touch - Apple Support
Sincerely,
- Brenden -
Mac can not see any printers.
I have 2 other computers (1 windows / 1 Mac Book) using the printers just fine but once device can not even find a printer. Any ideas?
Printer is Ricoh Aficio MP C3501
The computer could not find the printers so I cleared them from system preferences. Updated everything, including downloading the most up to date driver, restarted and still can not see any printers.
Thank you for your help,
Darren DHello ddelin,
Welcome to the Apple Support Communities!
I realize that two out of your three computers can see your printer, but one MacBook Pro will not. You have also done some great troubleshooting by deleting the printer, installing drivers, and trying to re-add the printer. If the issue continues, I would suggest resetting the printing system. Please use the attached article for more information.
Troubleshooting printer issues in OS X - Apple Support
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Best regards,
Joe -
Can not see Preveiws when downloading into Lightroom 3
In downloading photos from my CanonEOS60 into Lightroom 3 I am getting "Preveiw unavailable for this file" help.
Hi Jim, I have had Lightroom 3 since it came out and have always used raw and had a full preview of all the photos held in the camera, this is what I can,t understand.
Original message----
From : [email protected]
Date : 07/01/2015 - 15:16 (GMTST)
To : [email protected]
Subject : Can not see Preveiws when downloading into Lightroom 3
Can not see Preveiws when downloading into Lightroom 3
created by JimHess in Photoshop Lightroom - View the full discussion
Are these raw images or JPEG images? If they are raw images are you using the sRaw feature? I don't know if your model has that option. Just looking for possibilities.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7073758#7073758 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7073758#7073758
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Maybe you are looking for
-
Calling Report From Oracle Forms
Hi I am calling this one report from oracle forms, I am using global temporary table to run that report. I am first inserting data into the temporary table through oracle form and then i am calling report in that form to view the data in that tempora
-
Replacing the Acrobat logo in digital signatures
I am using Adobe Acrobat X Pro 10.1.8 on a Macintosh. When I create a digital signature, there is a checkbox option in the "Configure Signature Appearance" window (under Acrobat->Preferences->Security->Digital Signatures) which, when checked, displa
-
RGB 98 or grayscale? Which profil is the best for IBook
I have a Black and white pictures iBook to produce and would like to know which profile to set up my picture in order to get better printing result? In RGB adobe 98 or grayscale?
-
Hi, Can someone tell me what does the 3 continous beeps mean when trying to startup the Macbook? It won't startup, it just beeps and blinks 3 times continously.
-
Acrobat cannot be installed on case sensitive formated mac
Any bug fixes available to get the acrobat installed on a Mac with case sensitive formatted hard disk? I formatted my mac withaout case sensitive but when I get the backup with my data from time capsule the original version comes back. Any help to th