Mac Client App Request/Suggestion

Have an app request/suggestion I'd really like implemented into the Mac Client App. Would really like to be able to "Wake-on-Lan" computers. I can do this on my iOS device but if I'm on my laptop/desktop I'm forced to go to the web interface. This is just more time consuming. Thanks LogMeIn!-Tim

Hey Phorden10,
Could you use the current case system, and add a form to the display of the last case, so the reply is actually a new case?
I remember there was a tutorial on making a web app as a voting system, and you could get notified when your request was replied to. You might be able to use some of the information from that. It was the BC Wishlist from a few years ago. I don't think they use it any more, but I guess a search for 'web app wishlist' might find the instructions on how they build it.
Good luck
Brendan

Similar Messages

When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?

When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?

When I accept an email invite from a client and want to save it to a Google calendar, it saves for 30 seconds and disappears. Does anyone know how to save a invite to a Google calendar in the Mac Calendar app?

Mac Client Certificate not found

Hey all, i'm trying to install the ConfigMgr client on a mac system. The site is 2012 SP1 RTM however since there is no release yet of the mac client i'm using the mac client install from the SP1 beta install folder (Suggested by Microsoft)
I followed the instructions on how to install clients on mac computer from technet. Everything from the install and the enrollment seems to complete fine no errors. After the enrollment when I open System Preferences > Configuration Manager it says "Certificate
not found" If i check the ccmclient log file on the mac it shows the following errors
Failed to Parse MgmtAuthority ServerList
Failed to get server list
Failed to GetProperty Mode from Configuration Provider : 80070490
Requested certificates not available in store
Certificate not found in store. Bailing out!
Failed to validate certificate
The certificate shows up under system in the keychain, the only strange thing is it shows for name the user who enrolled in the certificate. I figured it should have showed the system name. The root ca is also there. Any help would be appreciated, thanks

Okay so figured this out, and i'll post in case this happens to someone else. The certificate will always show under the keychain with a name of whoever the user was that did the enrollment. So if you used Joe Smith, then the certificate will be called
Joe Smith. In my case the account I used to enroll had a active directory display name of two words such as "Joe Smith" Because of this space in between, configuration manager client kept listing the certificate as "Joe". I was then realized that indeed just
like the error said the certificate could not be found because its looking for Joe and the the certificate says Joe Smith. The fix was instead do the enrollment with a normal account with no spacing in the name. This may be a bug or Microsoft may not recommend
creating AD accounts with display names with spaces.

Outlook 2011 SP2 Mac Clients - Mail could not bve received at this time...

After Upgrading to Office SP2 for the Mac, our Mac Clients can no longer Connect to the Exchange server
Server: Version 14.1 (Build 218.15) / 0.1 (8.0.535.0)
Client:14.2.2 (1202421)
The Error we get just after launch is:
Mail could not be received at this time. The server for account "" returned the error "Logon failure: unknown user name or bad password." Your username/password or security setting may be incorrect. Would like to try re-entering your password?
When this happens and you click yes, to try to enter your password again, your account typically gets locked out on the AD Domain after a few attempts.
We have tried the keychain workaround/solution to no avail, we have rebuilt Profiles, Cleaned and Compressed the Identity Database, etc... No Love
I can login to the https://mail.domain.com//EWS/Exchange.asmx url and it comes back with the WSDL file.
The only thing I have found that Might be a possible solution was this:
http://www.exchangeranger.com/2011/03/mac-outlook-2011-clients-getting-bad.html
Basically says to: Removed the EWS VirtualDirectory and recreated the EWS VirtualDirectory
Okay that's fine and all if None of our EWS services were working, though we have several other systems (non Mac) that are talking to the Exchange server via EWS (Web, Custom VB Apps, SQL SSIS, Azure Compute Service and many more) So I really don't want to
Blow away the EWS if everything else is working fine.

Here are the log entries from the IIS web:
I'm guessing these first three entries are from iCal, that is working fine.
2012-09-17 03:50:23 10.1.1.15 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 Mac+OS+X/10.8.1+(12B19)+CalendarAgent/47 401 0 0 15
2012-09-17 03:50:23 10.1.1.15 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 Mac+OS+X/10.8.1+(12B19)+CalendarAgent/47 401 0 0 30
2012-09-17 03:50:23 10.1.1.15 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 Mac+OS+X/10.8.1+(12B19)+CalendarAgent/47 401 0 0 15
This is where I started Outlook:
2012-09-17 03:51:57 10.1.1.16 POST /autodiscover/autodiscover.xml - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 264
2012-09-17 03:51:57 10.1.1.16 POST /autodiscover/autodiscover.xml - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074254 46
2012-09-17 03:51:58 10.1.1.16 POST /autodiscover/autodiscover.xml - 443 DOMAIN\Username 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 200 0 0 1025
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 46
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 46
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074252 77
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 DOMAIN\Username 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 200 0 0 186
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 0 0 15
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074252 46
2012-09-17 03:51:58 10.1.1.16 POST /EWS/Exchange.asmx - 443 - 10.11.3.9 MacOutlook/14.2.3.120616+(Intel+Mac+OS+X+10.8.1) 401 1 2148074257 31
Connecting to: https://mail.domain.com/autodiscover/autodiscover.xml
comes back with a Username and Password Prompt, and then displays:
<errorcode style="font-family:Times;font-size:medium;line-height:normal;">600</errorcode> <message style="font-family:Times;font-size:medium;line-height:normal;">Invalid
Request</message>
Connecting to: https://mail.domain.com/EWS/Exchange.asmx
Redirects me to the following URL: https://mail.domain.com/EWS/Services.wsdl
What else do you need?

Forms 10g on Mac client hangs

Hi again,
I have a few Forms 10g applications running on a Solaris network, running version 10g of the database. These apps are running okay with Windows xp clients, but as soon as we try and have a Mac client access them they hang. Looking in the Java control panel, they seem to hang when the Forms Applet is started (Normally on Windows machine the servlet loads and the the images jar file is processed).
Can anyone offer some suggestions on what to look for?
Thank you,
Tony Miller
Webster, TX

JRE is 1.6.19. Solution that has been provided is:
Under Safari must first go to Develop and then User Agents and then select IE 7 before trying Application. User MUST do this EACH Time they try and run application, since it is NOT stored in browser for long term.
I am talking with the customer to see if we can just migrate the applications to a more palatable development product...
Thank you,
Tony Miller
Webster, TX

Delete OS X Facebook App Request Activity

Hardware/Software:
Macbook Air Mid 2013 1.3Ghz 8GB RAM 120GB SSD / Mac OS X Yosemite 10.10
Issue:
I think it was created when I linked OS X Lion to Facebook. At any rate, I have removed the integration between any Apple device/software I own and Facebook. As you can see:
However, the offending App still shows up in the App requests activity:
Troubleshooting:
Signed out of Facebook on OS X. Enabled disabled App Platform on Facebook.

Perhaps you're right, somegirl.
But don't you find it strange that this happens not only with the OS X Mail client but also with something as established as MS Outlook?
Actually, there's more going on with VZ's mail servers than we'd care to deal with; to wit,
- a friend on att.net frequently gets her e-mails to me blocked for no good reason; she then has to request VZ to put her - again - on their whitelist;
- and on the evening of Monday 13 Sep 2010, I couldn't send verizon.net mail anywhere; I could retrieve Incoming messages, but none could go out; this persisted for about an hour.

Latest Microsoft RD Client App (8.0.8) does not work on iPhone or iPad.

We use the RD Client app from Microsoft on all of our mobile devices. The newest version of RD Client (8.0.8) doesn't work on any iPhones and iPads. It crashes when it tries to connect to the designated remote gateway. All previous
versions seems to work, 8.05, 8.0.6, and 8.0.7. We tested it on a MAC desktop and Android devices and they seem to work fine. I tried uninstalling and the re-installing the App, but it still doesn't work on the iphone or ipad. It just crashes and close
out. We tested it on iOS 7.1.1 and 7.1.2. This is definitely an issue with the latest RD Client software. We tested on a lot of iPhones and iPads and all results been the same. Need help.

Hi,
If we do not use Remote Gateway, does the issue also occur?
Meanwhile, please provide us the log for check.
Thanks.
Jeremy Wu
TechNet Community Support

I am new in using Mac operating system, kindly suggest ebooks , videos or audio books to me so that i can learn more about it?

i am new in using Mac operating system, kindly suggest ebooks, videos or audio books to me so that i can learn more about it.
any kind of help would be appriciated. i am very eager to learn.how to make ios application? and how to effectively use terminal? where does the basic programming start in Mac? what are the different tools that can help me make an Mac application and ios application.
-Thank you
Shailendra (India)

Apple has got some great guides to start developing in Objective-C, used for programming OS X and iOS apps > http://developer.apple.com/library/mac/#referencelibrary/GettingStarted/RoadMapO SX/chapters/01_Introduction.html

Large XML Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2 (ATG.H RUP 5), and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

Thanks for the link. It looks like the sysadmins have throttled cups to low to allow large bitmapped print jobs:
grep MaxRequestSize cupsd.conf
# MaxRequestSize: controls the maximum size of HTTP requests and print files.
MaxRequestSize 10M
I am trying to get a more reasonable size limit.

Large BI Publisher reports fail with client-error-request-value-too-long

We are running BI Publisher 5.6.3 with Oracle Applications 11.5.10.2, and are having frequent failures with client-error-request-value-too-long messages on large PDF reports that cause the entire report to not print.
The exact error message is as follows:
lp: unable to print file: client-error-request-value-too-long
Pasta: Error: Print failed. Command=lp -c -dPDX_B6_1LJ5200NEAST /logs/temp/pasta3262_0.tmp
Pasta: Error: Check printCommand/ntPrintCommand in pasta.cfg
Pasta: Error: Preprocess or Print command failed!!!
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. Program exited with status 1
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. Program exited with status 1.
Action: Review your concurrent request log file for more detailed information.
I have Google'd client-error-request-value-too-long, and found it is a common CUPS issue on Linux. The popular solutions (having /var/spool/cups and /var/spool/cups/tmp) are already in place. Also, the temp files are nowhere near 2 GB (44MB).
Has anyone had this issue with BI Publisher on Linux?

The linux sysadmins set the cups max_request_size at 10 MB, which was causing this error. Once the restriction was lifted, the reports ran without error.

[Windows 8.1 Desktop/Surface/Phone] connect client app to synchronization service(s)

Hello Everybody!
I have to do some research about: what is the best way to set up my project, I am new to Azure.
Situation:
I need to develop a service(s) and client app(s) that are able to synchronize data with each other: files and database changes. the client app(s) must have the capability to work online / offline, offline: when there is no internet connection
the data has to be stored local on the client device(s) and sync it later when there is active internet connection.
Client Devices:
Windows 8.1 (Windows 8.1 PC/Desktop)
Windows 8.1 RT (Windows 8.1 Surface tablet)
Windows Phone 8.1 (Windows 8.1 Smart-phone)
We prefer to create the clients as a C# Store App Application.
Service:
This might become , if technically possible and preferable, a Azure service who main task it is to manage the communication between the server and the clients
Last days I spend my time doing research about how to get this done right.
I found several interesting techniques, some of got all the features I needed, and some just a few, but most of them aren't supported on one or more devices.
Microsoft Synchronization Framework
Sync Toolkit WinRT / Phone
Live SDK
Microsoft Synchronization Framework - got all the features I need but is not supported on Win RT and Phone
Sync Toolkit WinRT / Phone - Only Database Sync, is got bad documentation and unknown if supported on Desktop
Live SDK - Libraries to integrate with OneDrive, Only File Sync
Questions:
Does Azure support all the devices?
Is Azure supported in C# Windows 8.1 Store Apps?
Is Azure suited to host a service I described?
Thanks in advanced!

Hi JelteV,
Thanks for posting!
Base on my experience, if you wan to synchronize data with each clients. I suggest you could refer to this solution:
1.Create a Sql Azure Database or storage account for storing your data
2.Create a WCF service (web role or work role ) for communication between Client and Database
3.Set Up Table Structure (Important). I suggest you could add the deviceID and userID to distinguish the different data source. And add fields such as 'status', 'create time', 'latest update time' and so on.
For example, you client insert a record into local database and set the 'status' as ‘stay update’ or '1'. When your client connect the database and synchronize the data to server, you could set the 'status' as 'updating' or '2' . After
synchronization data, you could change the status as 'updated' or '3'.
According to this idea, the client CRUD -> change the local state code
-> Sync data -> change the local state code ->
synchronization is complete -> change the local state code .If the mobile device need operate the data on the service , it also need to change the server status code to be updated, to be deleted (deleted should
be treated differently), the next time the client login server automatically checks the "state" as "pending action" and then synchronize the server to the client. So whether it is operating on a local table, or on the side of the direct
operation of the service, you can ensure that the data is synchronized two tables.
>>Does Azure support all the devices?
>>Is Azure supported in C# Windows 8.1 Store Apps?
>>Is Azure suited to host a service I described?
From your question, I think you could create a WCF service host on azure, and call WCF service form different devices. And this method is supported the different device and win8.1 store app.
Also, please see this thread:
http://stackoverflow.com/questions/14595738/net-data-synchronization-between-multiple-clients-and-a-central-server
Hope this helps.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I want to go back to Snow Leopard but I get "you have to install mac osx.app 23.1.1

I have a new 21.5 iMac I just purchased July 9 so I was able to download Lion for free under the up-to-date program. After installing Lion I decided I wanted to go back to Snow Leopard for various reasons. When I restart with the original Snow Leopard DVD that came with my machine and holding the C key down, I get the window for Mac OS X install DVD. I click the icon to install SL and another window pops up stating "You can't use this version of the application. Install Mac OSX.app with this version of Mac OSX. You have to install Mac OSX.app 23.1.1" To answer the question before hand....I don't have a time machine backup.

Thanks for all your help guys. I had trouble with my first install of Lion, it seemed buggy and when I tried some of the suggestions you offered, my machine did not always react the way it should have. I thought that was weird because it's a new iMac, only three weeks old. Pondini pointed me in the right direction and I think Lion is stable now. This worked after a few tries, not sure why I wasn't getting consistent results but it worked eventually.
1. Shut the computer down.
2. Hold "command" and "R" and turn on the computer (I believe this is recovery HD from the internet because it wasn't working from my hard drive)
3. After a few unsuccessful tries, and repeating #1 and #2, I finally got a window to reinstall Lion. This took about an hour to download and after that things went as expected.
As long as Lion is more stable than it was on my first install, which it seems to be now, I'll just stay with it. After this experience, I would say "make sure you need the features in Lion, and that all your current programs are compatible with Lion before you forge ahead."
Thanks again

. It's not clear to me if the default sync for calendar is the iphone or my mac (shows 82 modifications). I want it to default to the mac but the wording suggests the iphone. Also, I don't see any way to do the syncy

I'm having trouble with a sync alert. It's not clear to me if the default sync for calendar is my iphone (3G) or my mac (shows 82 modifications). I want it to default to the mac but the wording suggests the iphone. Anybody know the default device and if it can be and if the other can be selected if desired
Also, I don't see any way to do the sync on an individual entry basis for calendar. Looks like it will only do all of them at once. I'd like to go through them one by one to confirm which entry is correct.
Thanks
PS This message ("Syncing with [OWNER'S NAME] iphone will change more than xx% of your calendars events or todos on this computer) only started when I recently updated my OS.

bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone.

Link to document not opening document in browser or client app

hi All,
i am using office 365 e1, i have aspx page on which we are fetching link of document and showing using CSOM. when user click on link instead of opening in client app or browser it is downloading.
if you have solution please help me

Hi,
According to your description, you want to open document link in client app or browser.
You need to active the “Open Documents in Client Applications by Default” feature.
I suggest you do as the followings:
1. Open “Site Settings”->”
Site Collection Features”.
2. Active the “Open Documents in Client Applications by Default” feature.
I did a test in my environment, here is a screen capture below:
http://tinypic.com/r/f05egm/8
Do you mean that it will download file or just an open alert in the browser after you click the document link ?
Please provide your detailed information such as screen capture, it will be easier for us to find the solution of the issue.
More information about open documents link in client app, please refer:
http://technet.microsoft.com/en-us/library/ee837425(v=office.15).aspx
Best regards

Tips on localizing rich client apps

We are currently using a properties resource file with around 1200 lines of localized
messages/text. There is also an ApplicationResource class which contains string constants corresponding to the keys in the language file.
-- client_en_US.properties --
table.column.name=Name
table.column.address=Address
ApplicationResources.class
public static final String TABLE_COLUMN_NAME="table.column.name";
public static final String TABLE_COLUMN_ADDRESS="table.column.address";
-- client app --
ApplicationResources.getResources().getText(ApplicationResources.TABLE_COLUMN_NAME);
The biggest disadvantage with this solution is that the ApplicationResources class gets very big and consumes quite a lot of memory, you'll end up with a string instance for each text that you want to localize. The advantage is that client devs don't have to look into the properties file for the proper key name instead they can use code completion(eclipse etc) and use the constant defined to get localized text. We also minimize runtime errors when property names are not found.
We don't have any restrictions on the memory on the client side but I feel that this solution is definetly not very optimal and quite "ugly".
Any suggestions on how to do this "properly"?

The biggest disadvantage with this solution is that the ApplicationResources class gets very big
and consumes quite a lot of memory, you'll end up with a string instance for each text that you
want to localize.Actually, you don't create any string instances that you wouldn't otherwise create. Further, the class consumes disk space but not necessarily memory, because the static final fields are inlined into the classes which use them, so if they're the only members of the class there's no reason for it to be loaded.
I feel that this solution is definetly not very optimal and quite "ugly".There aren't any nice ways of doing this, because you have to have some duplication. Your way of doing it is no worse than any other I've seen.
If you really want to be sure that you don't hit runtime issues, my advice would be to write a model checker to put into your build process which scans the bytecode for calls to getText, asserts that the parameter is a constant string, and scans the properties files to ensure each has an entry with that string as its key.

Mac Client App Request/Suggestion

Similar Messages

Maybe you are looking for