Mac connects but PC won't connect to internet via TIme Capsule wireless net

I have my personal Mac and work PC at home. I'm switching from a wireless network using my airport extreme base station to a new time capsule. Had no problems earlier, but now with my new wireless network I have the following problem:
- Both Mac and PC are able to connect to my home wireless network created through Time Capsule
- Only Mac can access the internet via the Time Capsule wireless network
- PC connects fine to the wireless network, but the settings indicate the internet cannot be accessed
I've tried fiddling with configurations etc. but cannot seem to get the PC to connect through to the internet using my Time Capsule.
The PC will connect directly to the net if I plug in the ethernet from my cable modem....What's the problem? Any ideas?

Welcome to the discussions forum AZR-DC.
The PC will connect directly to the net if I plug in the ethernet from my cable modem...
Make it a habit to power down your modem whenever you connect something different to it. Merely detaching the AEBS and attaching your Time Capsule or your computer directly will confuse most modems, so leave it powered down for a few moments. Power down your other equipment while you're at it.
Then, power up all the equipment as follows:
Modem... wait a few moments for it to complete its startup sequence.
Time Capsule. Wait a few moments again.
Computers.
Be sure your PC and your Mac are getting their addresses "via DHCP".

Similar Messages

  • DirecTV DVR HR20 connect to internet via Time Capsule

    Hi Everyone,
    I've searched and come across various topics about connecting the DirecTV DVR to the internet via Time Capsule, but none of them seem to provide a solution for wireless connectivity. 
    Can anyone point me to a topic where it describes the steps and any issues related to getting my DirecTV DVR connected to the internet via the Time Capsule wirelessly.
    I have gone through the setup and I get connected to my network, but I get the error when it tries to connect to the internet.
    Do I have to do any port forwarding or anything special?
    I use to have my Netgear supporting this configuration, just purchased the Time Capsule and now I cannot get my DVR connected.
    Thanks for the support
    Jeff...

    The Direct TV DVR has an Ethernet connection on the back, which is strongly recommended if you intend to download movies or any kind of high definition material.
    If you are trying to use the new Whole Home feature, wireless is not supported by Direct TV for this service.
    If you are trying to connect to the DVR using wireless from the Time Capsule, you must be using some sort of wireless to Ethernet bridge device.
    What device are you trying to use?
    Have you verified that this device is compatible with the Time Capsule?
    As a test, connect the adapter/bridge to your laptop and turn the wireless off on the laptop. Open your browser to see if you can get an Internet connection.
    If you can, you know the network connection is good and the focus shifts to the DVR as the source of the problem.
    If you can't, we'll need to figure out if the adapter you are using will work the Time Capsule.

  • Windows XP won't connect to Internet via Time Capsule AE

    I've got a MacBook Pro and MacBook using Airport Extreme via Time Capsule. I recently partitioned MacBook Pro and added Windows XP via Boot Camp. The XP sees the Airport but cannot connect. I've added the same key to XP as used for Mac access, but it still doesn't connect.
    Its a WPA2 Personal Key. XP allows WEP, WPA, and WPA-??? (there are three other letters there that are NOT "2" or "Personal"). It allows one of two "types" that are TKIP or AS? (Three letters that I can't remember.) I'm completely lost.
    I also tried changing channels, but that's frustrating unless I just change from the PC end. I had been changing them on the Mac, then rebooting to XP to see what happens. (Nothing, so far.)
    Has anyone successfully gotten XP on the Wireless?

    XP wireless to a Time Capsule works fine. Problem is, as you've found, choosing the right wireless security, then entering the key in the right format.
    Because of this problem in mixed OS X / XP networks, I've stuck with WEP. It's less secure, but it works!
    I live in a rural area, so wireless security isn't really an issue.
    Try reconfiguring your TC to use WEP. Once you've got it working, investigate the other security options.

  • Computers connecting to internet via time capsule are reporting no internet connectivity.  PC is reporting default gateway has changed.  How to I correct this?

    Am having trouble with maintaining a stable wireless network via the Time Capsule.  Am running 1 Mac and 3 PC on a Time Capsule wireless in bridge mode connected to a Verizon wireless router.  Verizon wireless is turned off and the Time Capsule seems to be staying connected to the Verizon router.  When any of the connected computerss goes to stanby, they often report the internet is no longer available.  The PCs say the default gateway has changed ans the Mac simply reports the network parameters have changed.  What do I need to do to the Time Capsule to stabilize the wireless network?

    It is unlikely that the gateway changes.. but anything is possible.. sorry I am not in the US.. is your service adsl or cable?? What sort of lease time does the public IP have? Some cable companies now rotate then on the hour I noticed.. others on about 3months.. but most it is one day.
    Track it yourself.. see what gateway address the TC gets and if it is rotating with the IP.
    If your client computers are running Mountain Lion.. the plain fact is, they are not particularly stable.
    Wireless is worst.. ethernet tends to be ok.. but for instance Laptops updated to Mountain Lion can be pretty flakey.. with the TC.. and it is the combo that is more the issue. People report improvement with clean install of ML. BUT there is still a bug there that causes the ML to be less than fantastic.
    I experience it occasionally even with a dlink wireless router.. after a wake from sleep.. the network will drop out and need to be manually connected back.. I have to admit I expect no better from Mountain Lion. I could load Snow Leopard on it and it would drop once every blue moon.. but I got the laptop with ML so I live with it.. !!

  • Vista laptop can't connect to Internet via Time Capsule

    I just setup my brand new 1TB Time Capsule and everything works perfectly with my iMac. Backups work and I can connect to the Internet fine. I'm using the TC as my network router, so everything will connect through the TC. My one-year old Compaq Vista laptop can connect to the Internet if the wireless security is turned off, but once I turn it on..no Internet for the laptop. It can connect and see the network, but can't get to the Internet. I've reset the TC several times trying various setting combinations and I've went through the laptop and tried to update Windows and any drivers that I thought might help, but nothing.
    I have the following Wireless settings on the TIme Capsule:
    - radio mode set to Auto
    - radio channel selection set to Auto
    - wireless security set to WPA/WPA2 Personal
    Am I missing something? I can't figure if this is a settings issue, laptop issue, or a Time Capsule issue. Any help would be greatly appreciated.

    Windows Vista and Windows 7 cannot see Time Capsule drive
    *Thread from:*
    *http://techsupport.foreverwarm.com/time-capsule-windows*
    This might be your security settings. Open the Local Security Policy utility:
    %windir%\system32\secpol.msc /s
    Navigate to Local Policies folder, Security Options view. Find “Network security: LAN Manager authentication level”. If it is set to “Send NTLMv2 response only” change it to “Send LM & NTLM – use NTLMv2 session security if negotiated”.
    ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable.

  • Windows PC running Vista can't connect to internet via Time Capsule

    My Macbook works beautifully with my TC, however I cannot get my Windows PC (running Vista) to connect to the internet via the TC. My PC shows it's connected to the TC, however when I launch the web browser it shows the cannot connect page. Has anyone else experienced this problem and if so I welcome your feedback.

    I have the same problem. Did you work it out? If yes, what did you do?
    Ta

  • I have a Mac connected to Internet via DSL modem. Just bought iPad (today). What hardware do I need to set up wireless LAN so iPad can be used anywhere in house? Will Linksys work with Apple?

    I have a Mac connected to Internet via DSL modem. Just bought an iPad2 and need to know what hardware do I need to add wireless LAN so I can use iPad anywhere in the house. Will a Linksys router work with Apple? Can Mac be "hardwired" and iPad wireless? Probably stupid questions but I need to learn. Thanks.

    Bob Timmons wrote:
    Thanks for the info. You are correct. I was speaking in general terms here based on my experience with the two devices in day to day use, and not in terms of exact specifications.
    A better choice would have been to say that the "coverage" is about the same with the edge going to the Extreme....due to the newer mutliple antenna design.
    We sure could use more help on the forums. Hope that you will become a regular.
    Hi Bob
    RF is a minefield, but one that I have worked in for ages, the most critical factor in my experience is location, location, location!
    Better routers have more intelligently designed antenna systems, output power as I said is the same, radiation pattern (coverage) is dependent on antennas and physical location more than all other factors.

  • Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

    Can't connect my new iPhone 4 with internet via Time Capsule. IP4 recognized TC but will not connect with it. (Password etc. is ok)

    Do the usual wireless things.
    Change the wireless name to simple name with only alphanumerics and no spaces.
    Set to manual and use channels 1, 6, 11 in turn.
    For testing take off the security altogether.
    The iphone only works on 2.4ghz so only that band is relevant.

  • I can't connect to internet using Time Capsule router.

    My hard drive recently died. I took the iMac to the Apple store and had a 500 GB hard drive installed. I disconnected my Time Capsule so the Apple rep could restore my data. Now when I try to reconnect to the internet via Time Capsule router, it won't connect. The cable modem is fine, and the Time Capsule's status seems OK with the green light. It even seems to be backing up OK. I don't think I did anything differently, other than unplug it in order to have the Apple rep restore my data. Any thoughts out there?

    It sounds like the cable company neglected to mention to you that you must completely reset the modem whenever you change the device that it is connected to. That's because the modem "associates" with a device and "remembers" the settings.
    If you then change devices, the modem will "look" for the old device that was connected to it and it will of course not "find" it, so it won't connect.
    That's why you need to do the complete sequence that I provided.
    If you still cannot connect after the complete reset, then you may have a defective modem. I'm not trying to pick on the cable company....and yours may be an exception...but the last time my modem was having problems, the provider kept insisting that "everything looks good". But, they always say that.
    I turned the modem off and called them back an hour later and they still said "everything looks good".
    An Ethernet cable has a slightly wider plug than a phone cable. If that's the only connector on the modem, then it must be the right one. Ethernet cables do fail. You might want to check your cable, just in case.

  • Problem connecting Dell Inspiron 6000 to internet via Time Capsule.

    Hi,
    Unable to connect Dell Inspiron 6000 to internet via Time Capsule.
    I get this "Windows is unable to connect to selected network. Network may no longer be in range". Any clue?
    Thanks.

    What modem do you have?
    Is it a router? What mode is the TC being setup in, bridge or router?
    Is it cable modem? If so did you power cycle the modem for the required time.. it might be 30min or just 5min or many hours depending on the ISP.
    Tell us more.
    For mavericks please ensure your network connections have ipv6 set correctly.. ie link-local.

  • Connecting Cable Internet to Time Capsule

    I know this is dumb, but I'm tired! I'm trying to set up Time Capsule using my cable internet. Time Capsule obviously does not have a coaxial cable port, so how do I actually get my internet feed into the Time Capsule? Do I need to keep using the router provided by Comcast and only use Time Capsule as a wireless backup? Thanks!

    sweetsweetjane wrote:
    Do I need to keep using the router provided by Comcast and only use Time Capsule as a wireless backup?
    You don't need to keep Comcast's router, but you do need something that can operate as a cable modem.  Depending on the exact details of your Comcast service, something like this device.
    If you don't want to go that route, you should put either the Comcast router or the Time Capsule into "bridge mode".  You're better off not having two devices both acting as a router.

  • Unable to connect to internet using time capsule

    Over the last couple of days I have run into a peculiar problem. I am able to connect to the internet when I connect the ethernet cable directly to my computer. Now when I use time capsule to connect wirelessly, the connection either does not get established or if it gets established fails after a few mins and I am unable to browse the internet. I have noticed this problem especially after Mac OSX 10.6.3 update. I did not have this issue earlier. I am not sure if this is the root cause but would surely like some help.

    This behavior may indicate that you are picking up wireless interference from cordless phones, another wireless network, security system or other electrical device. It's hard to pinpoint the exact cause.
    Suggest that you start by downloading iStumbler and using the application to display your signal strength and noise on your network. What values do you see for each of these?
    Also look at any other networks to see if they might be using the same channel or an adjacent channel as your wireless network. If so, change the channel on your wireless network so that it is as far away as possible from other networks.
    If you have cordless phones, turn them all off for at least an hour when you can to see if your network performance improves.
    Interference robustness often does more harm than good. Try turning it off. However, if you find that your network performs better with it on, that is an almost sure sign that wireless interference is occurring on your network.
    You won't be able to do anything about cordless phones at your neighbors (my neighbor...across the street...can knock me off my wireless network if he is in his front yard with his phone and it rings). Users far underestimate the effect that cordless phones have on their wireless networks.
    Post back with your findings when you have tried a few things.

  • How to connect over internet to time capsule from iphone?

    I want to connect to my time capsule 2013 over the internet with an iphone 5, my time capsule is now set in bridge mode and main router is an airport express. How to set to connect in this case and what is a global hostname? In the past i have time capsule as primary router and it was ok to access with file browser, but now i can't connect only in the local wi-fi. Sorry about bad english.

    You will have multiple issues here.
    It would be much better for the TC to be the main router. Do you have to use express as the main router?? It is underpowered and does not even have disk access.
    Remote access is also super difficult from an iphone.. it is not a Mac.. apple designed remote access for Macs.
    https://discussions.apple.com/docs/DOC-3413
    You can use filebrowser method.
    http://www.stratospherix.com/support/gsw_timecapsule.php?page=6remote
    Only you need to use the LAN IP of the TC instead of the LAN IP of the express.
    Global domain name.. might still work or might not.. apple is working hard to avoid it..
    The best option is to buy a static IP from your ISP. That simplifies this whole setup.
    Another option not listed is to replace the Express with a proper vpn router. iphone has vpn client built in.. but apple did not include a vpn in their routers. VPN is a lot safer and standard routers use standard dyndns.

  • Lost internet connection via time capsule, wireless signal grayed out. What may be wrong?

    My mac mini started intermitently losing connection to the Internet. Checked settings, look OK, no changes. Wireless signal icon in the menu bar is sometimes full sometimes grayed out (no connection at all). Other computers connecting via the same Time Capsule without any problems. I've serched forums and tried some suggestions to no avail. My mini is core 2 duo 1.83 GHz, 2GB RAM. Snow Leopard up to date.
    What may be wrong?

    Well, I reset the TimeCapsule to factory settings and configured it again for my home network and all works like a charm again.

  • Delayed Connection to Internet using Time Capsule on a network

    I have a Time Capsule connected to a Verizon Actiontec DSL modem/router.  It is connected in bridge mode.
    The problem I am having is that when I first access the internet it takes a long time, then after the first page loads all the subsequent pages load fast and well.  It is almost like there some connection issue at the beginning that the software eventually corrects.
    Also, when I bring up the Airport Utility, if often shows at first the Internet as "amber" and "disconnected" while the Time capsule is green.  But I know if I access the DSL/modem at 192.168.1.1 it always shows it is connected.
    Has anyone heard of such an issue before, and how it can be corrected?
    Thank you.

    what version is your TC?? A1xxx from the base and firmware revision.
    Or just post the picture from airport utility. You can pick up the model from the full summary page.. hold down the option key and double click the icon of the TC in airport utility.
    The later firmware on Gen1-4 is less than robust.. downgrade to 7.6.1
    The 7.7.3 firmware on the Gen5 is also issue prone but more the hardware can have issues.. if the actiontec modem has ethernet ports set to auto the TC may not negotiate correctly.. Try and set it to 100mbit full duplex .. if that is not possible use a crossover cable or a small 10/100 switch between the TC and the modem.
    I have a Time Capsule connected to a Verizon Actiontec DSL modem/router.  It is connected in bridge mode.
    Is "It" the TC or the Verizon as it is unclear exactly which you are bridging.. I am guessing the TC.

Maybe you are looking for