Mac contents not shown from windows

Everything worked fine before I installed windows package 3 update. Now, I can see the macintosh drive in My Computer but nothing shown in the users/(my computer name) folder when I want to read my mac drive from windows.
To be more clear, Mac drive is accessible. But no contents shown in the folders.

Not sure yours is the same issue, because you seem to stuck at the pulsing dash stage (not the 'no bootable disk' stage).
Anyway theflickguy's instructions on page 2 of this thread worked for me and others, and are more specific than the same info I found elsewhere.
Edit, The alternative is to wait for Apple to release the next version of Bootcamp which will support Windows 7 for some models. Current version does not support Windows 7 without recourse to special measures.
Edit again....just noticed this thread is over two months old!
Message was edited by: Mike Boreham
Message was edited by: Mike Boreham

Similar Messages

  • .ht access - content not shown

    .ht access - content not shown. i have a folder protected with a .htaccess file.
    http://cadmo.de/films/
    just klick on one of the thumbs - and type in Guest and password_2012.
    after that, nothing happens.
    on every other browser, the film is shown, even safari on windows is working
    any suggestions?
    best harry

    No suggestions anyone???

  • My MAC is not shown in My Devices in Find My iPhone web

    After installing Lion 10.7.2 I've used the Find My iPhone feature to find my iPhone and my iPad. I've activate in Preferences-iCloud the Find My Mac option but my MAC is not shown in the list of my devices in the web application. Is anything more I have to do in order to this feature work? How can I know if my MAC is in the list but maybe is not possible to locate it? My MAC is connecte to a wifi network.
    Thanks!!

    Mine's the same. I can't locate my Mac Pro, but I can my iPhone and iPad.
    I have "Find my Mac" turned on in preferences, and a picture of it appears on all my devices, and I can send a message to the Pro etc. but it just can't pick up a location.
    I'm baffled.
    Bob.

  • After 10.5 upgrade Mac will not boot from hard drive

    I just upgraded to 10.5 Leopard but my mac will not boot from the hard drive even after selecting my hard drive as the startup disk. The mac will start to boot but will cut itself off before the boot is complete. I have to leave the Leopard disk in the mac and hold down C to get the mac to turn on but it only allows me to install the software again.

    instead of archive and install you might first want to try restoring your system using TM to some time point before your failed 10.5.1 upgrade. Then try upgrading to 10.5.1 again. I would suggest downloading the full 110 MB upgrade and installing it manually rather than doing it through the software upgrade menu.
    You can download the upgrade here:
    http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1051update.html

  • All SYFY online on demand has error "Content not available from this domain"

    I keep getting an error on any SYFY online on demand shows which says "Content not available from this domain." This applies to any show from SYFY that I click on to test.  Other channels don't have that error.

    Hi,
    Thanks for bringing this issue. Yes, the message should be SEVERE. This will be fixed.
    You may also want to subscribe to [email protected] and bring up any issues, enhancements.
    Regards,
    Deepak

  • I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing.

    I Mac is not reading from DVD drive. Disk will insert, then some noises but after a few seconds, nothing. I am trying to install Broterh printer disks. Any ideas? I am on Mavericks.

    Reset the NVRAM/PRAM and Reset the SMC, then try again.

  • Received delivery subsystem error email 25,000 plus times. Can delete easily from my mac but deleting from my inbox on my mac does not delete from inbox on my husband and my iphones. HELP

    Received delivery subsystem error email 25,000 plus times. Can delete easily from my mac but deleting from my inbox on my mac does not delete from inbox on my husband and my verizon iphones. HELP

    delete and re-add e-mail on iphone and it will update with whats current on the server

  • Mid 2007 Macbook Pro will not boot from windows 7 DVD

    I'm trying to install Windows 7 64 bit on to my mid 2007 MBP. The DVD is valid, boots on a PC and I was able to load WIndows 7 into a VMWare fusion virtual machine on the very same system. I am convinced from those actions I have a good DVD and a good DVD drive.
    What happens is the screen goes black and "1. 2. and Choose type of DVD boot:" appear. ( I may have the phrase slightly wrong) No matter what I type nothing happens. I've gone into the boot selecter and same thing happens if I select the DVD.

    so you did not burn the DVD from ISO? that is what this usually is.
    the error and yours being 2007 says you are trying 64-bit and your Mac does not support 64-bit versions it has 32-bit ROM (and likely cannot upgrade past Lion when 10.8 Mountain Lion comes out).
    Windows 64 Bit Unsupported Macs
    What you are seeing is an EFI boot menu "select CD 1 or 2" yes.
    Select CD-ROM Boot Error Apple
    CD-ROM Boot Type when installing
    Install Windows 7 x64 Mac Select CD-ROM Boot Type

  • Text frame not shown on windows server 2008

    I am facing the issue that on windows server 2008 the frame of a text fields are not shown. On windows 7 there is no issue. As example I have attached two screenshots showing that on windows 7 the frames for precision and scale are shown, but on 2008 not (additional info: the text field is there and can be edited).
    Do you know such an issue? Any suggestion how to solve it?
    Many thanks for your help
    Peter

    Hi,
    When you click the Plus sign next to a master page to create another master page, it doesn't inherit the objects from the master page. It simply creates a blank master page. If you want the new master page to inherit the objects, then right click the desired master page and select "Duplicate page".
    As far as child pages are concerned, yes, they should inherit all the objects and properties of the master page. It is really odd if its not happening for you. What happens when you right click the child page and apply desired master for that menu?
    Regards,
    Aish

  • Mac will not boot from hard drive or install disc

    Hello All
    In dire need of advise...my intel Mac will not boot, even tried booting to the Snow Leopard install disc and all I'm getting is the white screen, apple logo and the wheel.
    Just before this happened there was a buzzing sound like the fan was about to fail but that is only a guess on my part. Is there a keyboard shortcut to boot to a terminal window or similar to force the computer to boot from the install disc.
    Thanks in advance for any help offered.
    Warren

    Hi Warren
    Try holding the Option key and see if it will boot into Startup Manager, where you should be able to choose from a good Drive or your install Disk.
    http://support.apple.com/kb/HT1533
    or the D key and run the Apple Hardware Test.
    http://support.apple.com/kb/HT1509
    Also note: key commands may require a USB Keyboard if your using a wireless and it has become unpaired.
    Dennis

  • PDF File downloaded from Mac Can't Read From Windows 7

    Hi,
    I am now doing a research, and every time when I copy the reference paper in PDF format from Mac to a flash drive, it could not be read from Windows at the university lab. Usually some pages of the file was missing. This really cause me a pain. Please help me.   Thanks...
    Max

    Almost all flash drives are formatted as a Windows drive. When you copy almost any file to the flash drive two different files are created. One corresponds to the data fork of the Mac file and the second is a resource fork. When viewed from Windows the resource fork has the same name as  the original file but it preceded by a period. This resource fork file should be ignored. The real file as far as Windows is concerned is the data fork file.
    Now if the file you are moving to Windows can be opened and is missing pages, then that is not the fault of Reader or the Mac OS. But is related to how you are creating or obtaining the file.

  • Office 2004 for Mac:: Problems Importing Data from Windows

    I'm not sure if this is the best place to post this but:
    I am switching from Windows and Outlook 2003 and trying to move my data from Outlook into Entourage. I was somewhat successful using O2M to import my Contacts and E-Mail.j However O2M created a bunch of .ics files that I can’t seem to get into Entourage’s calendar.
    I also have a lot of Outlook Notes and Tasks that I can’t seem to import or drag into Entourage’s Notes and Task windows.
    Any suggestions? I didn’t think it would be so hard. You would think that Microsoft as the vendor of both programs would have provided a smoother method of moving data between their programs.
    Thanks
    Ben

    Thanks for the response. I will check the site that you reference.
    Just out of curiousity--why is this not a good place to ask this question? As a new user to the Apple/Mac community am I relegated to asking questions only about Apple hardware and software written only by Apple? One of the enticements for switching over to Apple from Windows, besides getting tired of having to be a technical wizard, were all the platitudes about how easy it is to switch. Well it isn't all that easy.
    Don't get me wrong, I am loving my new MacBook Pro and I imagine once I get my Outlook data over to the Mac I will be really happy. But given that all my email, notes, tasks, calendar and contacts for years have been on my Windows machine I would have liked a little less hair pulling trying to get it over to my mac. It has not been clean and it hasn't been easy [over a week now].
    Somehow I thought "Well I'm probably not the first person to be taking this route and where would I find the largest number of people who may have already gone before me and could offer directions/suggestions." I did do my research and based on the number of postings concluded that Office2004 for Mac was the best choice if I was using Outlook on Windows and needed to continue to use Word/Excel/Powerpoint with the rest of the business world. And it did appear from all the postings that a lot of people use this package.
    Again, this is not meant to come off harsh, but it is a little off-putting to be told "This isn't the appropriate place for this question"
    Thanks
    Ben

  • CS6 Cloud InDesign problem: Will not open from Windows

    I have a CS6 Cloud subscription. I cannot open InDesign files from Windows, which thinks they are pdfs, and I cannot reset this preference. Do I need to uninstall InDesign, use the CS Cleaner tool, and reinstall? If so can I do all that just for the InDesign product rather than the whole creative suite?

    Ken
    Thank you. I do appreciate your response, but, unfortunately, that approach, which should work, as you say, does not.
    The .indd is described on my compuer as an Adobe Acrobat Document and the current default is Adobe Acrobat, so whenever I click on any .indd document in Windows Explorer, Acrobat is instructed to open it which, of course, it cannot.
    Changing the file association should work in the way you describe, but instead here is what happens:
    When I get to your step 5 (shown above) and I click on 'change program' I get a list of programs to choose from. The recommended program is shown as Adobe Acrobat and the list of other programs does not list Adobe InDesign. So, I browse to the Adobe InDesign CS6 file in my programs area on my C Drive, find the InDesign.exe file and click. And... nothing happens except that I am taken back to the screen where I am supposed to choose which new file I want associated with .indd.
    So, now I cannot open InDesign files unless I first open the InDesign program and then open the file from within the program.
    Do you think this indicates a corruption in the InDesign files? Is there an easy way to fix it?

  • Hp envy 4500 will not print from windows 8. Thinks it prints, but it doesn't.

    Am trying to print from my Toshiba laptop running Windows 8 to my HP Envy 4500 wirelessly. Works fine from my ipad, works fine from my desktop and laptop running Windows 7. I have uninstalled and re-installed the printer driver 5 times. Printer is recognized, has an IP addrress, and will print an internal test page. When I print to it from my Windows 8 machine, the file goes in the queue, gets a port, and then disappears as if it was printed. Nothing prints. Please help, this is SOOOOOOOOOOOOOOOOOO frustrating.
    This question was solved.
    View Solution.

    Having same problem with my Toshiba laptop windows 8.  Will not print from laptop, printer prints from ipad, and iphone.
    Deleted and reinstalled several times as well both ways with disk, and wizard.
    still unable to print from laptop, have to email everything to ipad in order to print.
    so annoying and frustrating.............

  • IPod not shown in windows or in itunes

    My ipod is not showing in my computer or in itunes however my wifes ipod is - therefore I can't see that it's a problem with the pc (although mine is 3G and my wife's is 2G). I have had the ipod just under a year and it's been fine until now. It won't charge and can't add songs as it's not shown at-all.
    Any ideas? It does connect to other PC's as I took it back to the store it was purchased from and it was recognised on their PC first time.
    I really don't know what to do!
    Any help greatly appreciated!
    Thanks!

    I've spoken with Apple and here is their response (worked for me). You need to uninstall not only iTunes, but also (in this order):
    1) iTunes
    2) Apple Software Update
    3) Apple Mobile Device Support
    4) Bonjour
    5) Apple Application Support
    Then you restart your computer. Then you install the latest version of iTunes (which will reinstall all those things you uninstalled). Then you restart your computer again.

Maybe you are looking for