Mac CS5 Dreamweaver won't put files

Just bought new mac, and CS5 Suite...
Exported PC site info(CS4), moved all files over, logs in to site fine, and edits files etc fine, connects to remote FTP, can download files, yet get permission errors when trying to put anything... pc still no problem... All settings are the same as far as I can see.. what could I be missing here on setup? Any ideas? I dont have contribute on or syncing or anything... static pages, nothing dynamic, just html & images.

The Host Directory is blank, thus the root, which is working fine on the PC.
As far as I can see even thought they format the content in different locations seems all the settings are the same, and since I exported/imported the settings, they should be identical.
CS5.5 v11.5 Build 5344
Also noticed this seems to be site specific as other sites work, yet this one does not... keep getting permission errors... have tried changing permissions to various choices, still no luck.. and again works with the permissions they already have on PC so makes no sense that is it.

Similar Messages

After migrating to new Mac Pro Dreamweaver won't launch, says missing menus.xml file. How do I resolve this?

After migration to a new Mac Pro Dreamweaver CS6 won't launch. It says it is missing menus.xml file. How do I resolve this?

Hi rustyg12,
Go to Applications/Adobe Dreamweaver CS6/Configuration/Menus/menus.bak
You'll see a menus.xml there - it is a backup copy of the actual menus.xml file that DW uses.
Copy it from that folder, paste it 1 level above (in Menus folder).
Fire up DW. See if it works.

Dreamweaver CS2 stopped putting files

Dreamweaver CS2 (Toshiba, XP Home) stopped putting files
using either up-arrow or Ctrl+Shift+U put command. After both
repair, then uninstall-reinstall, same symptoms. Deleting or
renaming remote file on server in side-by-side view, followed by
drag-drop of modified file does upload, but any attempt to upload
with overwrite is failing...without error message. The dialog
appears, disappears normally...but nothing happened on the server
(godaddy...they checked their end to be sure). Referring to common
HTML, JS text files, etc.
Suggestions anyone?
Thanks, Doug ([email protected])

It's a common problem that people run into with FTP issues.
Unfortunately, rather than walking someone through the steps it is
easier just to point point people to the KB articles they need
because sometimes files or preferences get corrupted and they just
need to be fixed which was obviously the case that there was an
issue with the site preferences not working.

**HELP** Dreamweaver won't open files!!!!

I am in a very bad spot right now in that Dreamweaver will not open files; neither .html or .php, neither those created by me, or by others.
I am taking a class in which we must use DW to complete Lynda exercises and my DW will simply not open any files. I have even created test files in DW, saved them, tried to re-open with DW and all that happens is the application frame blinks and no open document appears.
I have a fresh, completly brand-new install of DW as of 6 days ago; all other CS6 apps in my suite work perfectly with no problem or issue whatsoever.
I've never experienced an app doing this before; re-installing, trashing the prefs do not cure the problem.
Maybe sound silly but could my copy of the CS6 downloaded installer contain a "bad" installer of DW?
Please help, if you can; out of ideas here!
thank you in advance,
w

wkjeiwoi wrote:
yes, TW opens no problem
OS X
I may have found a fix: changing the files' "Open With" to Dreamweaver.
never been a problem before, but DW appears to care very much about what this is set to.
thank you!
Actually your OS cares very much what this is set to.
I keep Firefox as my default app topen HTML files, JS, CSS, ASP, PHP all open with DW but my regular files open in the browser. I find it kkeps me from accidentally editing apage I only wanted to view if I limit my ability to open an HTML doc with DW to openingit from within DW (no double clicking an HTML file to open DW)

Dreamweaver CS6 (non-cloud) won't "put" files

Recently updated Dreamweaver off Adobe site, from CS4 to CS6, Windows 8.1. Read many of this same complaint. My "About Dreamweaver" screen says CS6, version 12.0 Build 5861. I am connected to my remote server and it appears to "put" but doesn't. Need help

The latest version of Dreamweaver CC 2014 is now available for download.
Download it from https://creative.adobe.com/ or directly through the Creative Cloud desktop app.
For the list of new features, see http://helpx.adobe.com/dreamweaver/using/whats-new.html
Forum announcement: The Dreamweaver CC June 2014 release is now live!
We’re excited to hear back from you. Please share your feedback.

PSE for MAC and iPhoto - where to put files

I am new to PSE4 and Bridge. I have used iPhoto for about a year, and have thousands of pictures in the iPhoto Library. I want to use Bridge and Elements to tweak my photos from now on. But, I want to use iPhoto5 for some things, such as emailing photos, creating web pages for .mac, creating slideshows on DVD for TV use, etc.
My question is this: does anyone else use both? What is your method/workflow for bringing files (RAW for me) from the camera to the computer - iPhoto or Bridge?
Right now, iPhoto opens every time I plug my Nikon in, I close iPhoto, then open Bridge.
One of my worries is that if I open and save with Bridge, I have to import the photos into iPhoto to create anything there. I believe this will cause me to have doubles of every file I use in both programs. Since I am pushing 2000 for total photos, I would be using a lot of HD space.
Thanks for any advice you can offer.

You can change your preferences for what happens when you connect your camera (card reader) to your Mac within Image Capture Preferences. If you set it for Image Capture you can then direct your images to a folder of your choice wherever you want it to be.
When you want to import specific images to iPhoto you can import them from the folders under File>Add to Library. In addition, if you have the iPhoto application open when you have your card reader connected for downloading to your folders, you can also copy them to iPhoto if you want as well.
BTW, 2000 photos is not considered a lot for the digital world. That's a day's shooting for some! You might want to consider an external hardrive for storing some of your images so you don't feel so constrained for space on your computer. It's a good idea in general for backing up file anyway.

Dreamweaver will not put file to ftp

I have identified the site in management tools, entered the ftp info, user, password, etc. and tested the connection, which went through successfully. When I edit an html page and upload it does not go through. I'm stumped!

I had not identified the root folder on the remote server. All set!

Simple question: Where can I set dreamweaver to auto put files on save?

I know I have seen this on other peoples computers that have
CS3 and I would like to do that at work but I cannot find where to
set that up. It is very sweet in situations where I'm testing code
and continually uploading to a server to do so.

that option is found in the Remote Info of your site
definition.
however, most people here would strongly advise against doing
that.
mrbleepa wrote:
> I know I have seen this on other peoples computers that
have CS3 and I would
> like to do that at work but I cannot find where to set
that up. It is very
> sweet in situations where I'm testing code and
continually uploading to a
> server to do so.
>
>

Dreamweaver CS5 crashes when putting file to server.

Recently I've had occational crashes when putting file to server, but it worked when I rebooted
system. Now, even I reboot the system, whenever I try to put a file into the web server, it crashes.
Message shows:
Adobe Dreamweaver CS5 has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Has anyone found a solution to this?
FYI, I'm using windows 7 64bit on intel i7 machine with 12GB RAM.
Your help is appreciated.

Try restoring your preferences
http://kb2.adobe.com/cps/839/cpsid_83912.html#main_Restore7V

Dreamweaver CS4 vs CS5 putting files

I have both versions installed on my computer. I can put files in CS4 to the server. When I close out of CS4 and use CS5 it (CS5) will not put a file to the server. I can do the test fine and it connects. I have copied all the settings and they are the same. I am useing the ip address of the server. I have disabled the firewall and have tried all settings for FTP type. Then when I go back to CS4 with my firewall turned on the connection works fine I can up load and download as usual. Is there some type of variation on how the two versions work? Any other idea of what to try?

I deleated the Server from CS5 and then closed the program. Opened the CS4 version exported the settings and then imported into CS5 then tried to put the file and it would not go error message says "
test.html - error occurred - An FTP error occurred - cannot put test.html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured.
File activity incomplete. 1 file(s) or folder(s) were not completed.
Files with errors: 1
test.html"
So then I go back to CS4 and it works. In between I have deleated the file off the remote server so that it does not have to overwrite the information. Pretty wierd.

My Mac won't let me put files into my external hard drive

I have a Lenovo USB external hard drive. I want to put files on it, but my Macbook air will not allow it. I am not sure what the problem is. Please help!

https://support.apple.com/kb/HT3509
Apple has a handy search function on their web page, so you can go to the upper right searchbox on most pages and type in what you need. Just typing in "format hard drive" gave me this result.

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

I took the system file out of the system folder on os 9.2 can't boot to put file back in machine also has osx 10.2 but won't let me boot to either need os 9 compatible boot disk I think?

If the OS X 10.2 on the hard drive is/was bootable, try this -
Restart or boot, then immediately press the X key, keep it held down until you know the machine has started to boot using OS X. This is a hardware instruction to the Mac to boot using the first usable instance of OS X it finds.
Once booted to OS X, you should be able to move OS 9's System file into OS 9's System Folder.
Note - in general, unless you know for sure what you are doing and that the results are desired, do not relocate or rename files in OS 9's System Folder or in OS X's System or Library folders.

DW v8 Won't Let Me "Put" Files

I have just upgraded from an earlier version of Dreamweaver
to v8, along with switching from Windows PC to Mac OSX.
In my previous version, I had no trouble clicking the
'up-down' arrows to 'put' files onto my remote server via ftp. I
have set up the server coordinates in the new version, and
Dreamweaver confirms that the server is connected. But when I go to
"put" the file, all the menu choices are dimmed out.
Apparently there is something else I need to do re:
establishing permissions or.... something. I don't know what, and
my brief forays into the "help" menus haven't been (any help, that
is). So I thought maybe I'd post here and see if there are an
suggestions...??
Thanks,
--PS

What's the deal, nobody subscribes to this forum? Nobody from
Adobe pays any attention? What does a person have to do to get an
answer to a simple question? Is this not the 'official'
Adobe/Dreamweaver forum? Hello!?!? Is this thing ON?
I still can't put... what's the deal??
--PS

Adobe Dreamweaver won't Connect or allow me to "Get" files?

I have used Dreamweaver before, so I know kinda what I'm doing. However, I just started using the newest version of Dreamweaver... so I'm a little back to square one.
I think the problem is how I have my FTP set up. Which boxes should be checked if I want to be able to get AND put files to my website? (Passive FTP, etc.) It only lets me change my website from the remote file and then I have to close out of the site I have up so that it puts it on its own when it is saving. Does that make sense? Help, this is a pain! It won't allow me to upload new pictures to my server either!

Maybe this tech note will help:
http://kb2.adobe.com/cps/147/tn_14787.html
Nadia
Adobe® Community Expert : Dreamweaver
http://twitter.com/nadiap
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
http://csstemplates.com.au/

I formatted the harddrive and reinstalled Cs5 Design Premium, but Dreamweaver won´t reinstall

I formatted the harddrive of my Macmini from 2010 2.4 Ghz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, Mac OSX 10.6.3 or 10.6.4 (snow leopard) and reinstalled Adobe CS5 Design Premium student edition, but Dreamweaver won´t install again. I downloaded a new CS5 from Adobe yesterday, but it doesn´t help. What´s wrong?

Hi Sara121,
Please let us know if you are getting any error and what is the error message you are getting if any.
Regards,
Abhijit

Mac CS5 Dreamweaver won't put files

Similar Messages

Maybe you are looking for