Mac does not recognise my admin password when I try to install updates

I have followed the forget password instructions by installing the Mac OS X install disc and restarting and holding down c key etc and when I put my password in it is still not recognised

Check the Accounts preference pane to make sure you are still listed as Admin. Check this out:
http://support.apple.com/kb/TS1278

Similar Messages

  • Mail on my Mac Does Not Recognise my iCloud Password

    I have transferred to iCloud from MobileMe today.The first problem I have found is that mail is not getting through to my Mac because Mail is not accepting my iCloud ID, I get a message as follows:"The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “mathewson”" I know I have the right password - I have to use it to get onto this site.What can I do?

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • Does not show my hard drive when i try to install Tiger...

    I have a Powerbook G4 that has no operating system installed yet, so when i try to install Tiger, i have to put the DVD in while booting up. I went to the installing screen, and i agreed to everything and all, but when i got to the part where it asks where to install, my hard drive does not show up. I went to DISK UTILITY and chose to erase the entire hard drive (I dont have anything on it yet) and I also chose to repair it. It didnt have any needed repairs, so I went back to the install screen, and it still didnt show the hard drive as an option. It is a 55.9 GB hard drive, and when i erase it, the size does not change, so I know there is nothing on it yet. In Disk Utility, the details for the Hard drive says it is named CSD CAT060L, it is a Disk, the media type is Generic, and it is Internal. I have tried this many times, but the exact same thing happens. My DVD for Tiger was unopened, and new out of the box. If you need any information about what happens or anything, just ask.
    Thanks a bunch, Eshan.

    Try this:
    1. Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

  • My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

    Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

    Hi Mick2291,
    Thanks for visiting Apple Support Communities.
    I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
    Apple TV (2nd and 3rd generation): How to restart your Apple TV
    http://support.apple.com/kb/HT3180
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Best Regards,
    Jeremy

  • Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

    my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
    The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    I recently tried updating my iPad and while doing this, my internet connection faulted. since then my PC does not recognise my i Pad when connected through USB. Can anyone help please???

    You may have to force your iPad into recovery mode in order to restore the device since the update did not complete. This article explains how to do that.
    iPad: Unable to update or restore

  • My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    My Imac late 2012 running Yosemite does not recognise my Huawei 3g usb modem. itried to install Java bt still it does not although the same modem works with my MacBook pro . any help please

    Hey there mbarikiwa,
    If your iMac still has not recognized the usb modem, I would use the troubleshooting for Yosemite USB issues in the following article:
    OS X Yosemite: If a USB device isn’t working
    If the device is connected to a USB hub: 
    Make sure the device and the hub are the same speed. Connect USB 3.0 SuperSpeed devices to a USB 3.0 SuperSpeed HUB, USB 2.0 Hi-Speed devices to a USB 2.0 Hi-Speed hub, and so on. 
    If the device doesn’t have a power cord and is plugged into another USB device that doesn’t have a power cord: 
    Try plugging the device directly into your computer’s USB port  or into a USB device that does have a power cord. You might need to disconnect and reconnect the other device as well, if it has stopped responding. 
    If you have many devices connected to your Mac: 
    Disconnect all USB devices except the device you’re testing, an Apple keyboard, and an Apple mouse. Make sure that the device is connected directly to the computer, and that any hubs or extension cables are disconnected. If you can use the device now, the problem may be with one of the other USB devices or hubs you had connected to your computer. Try reconnecting them, one by one, to your computer. When you find the device causing the problem, review its documentation for further troubleshooting steps. 
    Verify that the device appears in System Information: 
    Choose Apple menu > About This Mac. In the window that appears, click Overview, then click the System Report button to open System Information. 
    In the window that appears, see if the USB device is listed below Hardware in the Contents list. If the device appears but does not work, review the device’s documentation for further troubleshooting steps. 
    Restart apps: 
    Quit and restart any apps that use the device. 
    Restart your Mac: 
    Choose Apple menu > Restart.
    Check your device’s USB connection
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Why is my Mac rejecting my Password when I try to install OS X Mavericks???

    Why is my Mac rejecting my Password when I try to install OS X Mavericks???

    You're sure you are entering the correct admin password?
    And you are logged into your admin account to install Mavericks, correct?

  • My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information?

    My iPhone 4S is not recognised by my computer when I try to sync. I am looking to upgrade, is it just easier to purchase a new one, then manually transfer data and information? I don't want to try syncing and backing up data to just lose it all. As the new one I plan to get is a newer model, I'm thinking it is just better to do it manually, but then I have the issue of syncing the new one to start.

    Hello Smeebo,
    Thank you for asking your question! It sounds like your iPhone is not recognzied in iTunes when you connect it to back it up, or update the device. I would try the troubleshooting in either of these 2 articles depending on what operating system you have:
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    or:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My mac keeps asking for a password when I try to install adobe flash player and even with the hint I

    My mac keeps asking for a password when I try to install adobe flash player. Even with the hint I'm not getting it and also tried uninstall and the same thing occurred.

    It's referring to the MAC password that you have setup.
    A software prompts for a password only when there are restrictions set on the user account for unauthorised access to system files and folders.

  • My new mac does not have a CD drive. How do I install CS4?

    My new mac does not have a CD drive. How do I install CS4? I have the serial number, etc. But my old mac is too out-dated to migrate the info.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • HT4796 I am getting the message "WindowsMigrationAssistantSetup.exe is not a valid Win32 application" when I try to install Migration Assistant on my PC running XP SP3

    I am getting the message "WindowsMigrationAssistantSetup.exe is not a valid Win32 application" when I try to install Migration Assistant on my PC running XP SP3

    That's a Windows PC issue. What is the Mac OS X Lion issue? In other words what are you posting in the Lion forums about?

  • A different apple id appearing when i try to install updates, how can i change that apple id?

    a different apple id apearing when i try to install updates, how can i change that apple id?

    That's the ID that was used for the purchase.  ALL purchases are permanently associated with whatever Apple ID was used to originally obtain them.  Apps can not be updated without knowledge of that ID and, more importantly, its password.  Apple IDs can not be merged and purchases can not be transferred from one ID to another.

  • HT1338 when I try to Install Updates I get an error massage. Can anyone help?

    When I try to install updates I get an error message " an unexpected error has occured" This involves: Epson Printer Software update 2.11; iTunes 10.6.3; Airport Utility 5.6.1; Remote Desktop Client Update andd Java for Mac OSX 10.6 Update 9. I also have purchased OS X Mountain Lion and have the same problem. Any suggestions?

    Try downloading from here:  Download Photoshop Elements products | 13, 12, 11, 10
    FYI this is the Photoshop section, Elements questions should be asked here: Photoshop Elements
    Benjamin

Maybe you are looking for