Mac doesn't communicate with Epson CX7450 printer

Couple days ago, while trying to fix a problem with my printer, I messed the settings for the printer. I don't know what I did, but there is no "Printer and Fax" icon in the System Preferences. When I press Print and get the printer setting I find the settings for CX7400 printer and not for CX7450. What should I do to correct this situation and get my computer talking with my printer.

You could do an Archive and Install - the important part is reinstalling parts of the system. Here are links that explain the various installs:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8177.html
http://www.apple.com/support/leopard/install/
Hope this helps.

Similar Messages

  • Help!  My Mac doesn't communicate with my DV camera!

    I need some help setting up my DV camera to my Mac Pro. I've done all the things that the help guide and manual tells you to, but it is still unable to communicate with the camera. I've tried changing my capture settings, capture pre-sets and my easy set-up. Please, any advice or guesses would be greatly appreciated!

    If you've followed Randy's suggestions above, and you say nothing shows up on the camera's LCD when you're connected (like DV IN), then I might suspect a bad firewire cable.
    Remember, the Easy Setup should be chosen first; then you should be capturing into the project with that Easy Setup. If you've chosen the DV NTSC setup, what happens when you open the log and capture window? Does it say "VTR OK" under the view window, or does it say "NO COMMUNICATION?"
    If the latter, again, you may have a bad cable. If you're getting the VTR OK, then try controlling the camera with the transport controls in the log and capture window. It should work.

  • WP Greek Century in Mac doesn't work with Dreamweaver

    I am a many year PC user and have finally made the leap too Mac and its another learning curve .. That said, in Dreamweaver and in Mac, WP Greek Century does not work!  I have reloaded the font and all I see is the alpha #.   If I load it into any browser, it still will not read greek.  My old PC didn't have a problem with this.  Some of the download sites say that this font, WP Greek Century, works with both PC and Mac.  The one odd spin to all this is that this greek font works in Fireworks ... Is there anything I can do to make it work in Dreamweaver?  Please advise and thanks.  Mark
    ps.  I called Apple support and they could not help.

    Thanks for your reply and I was afraid that this might the answer.  Looks
    like I'm going to have to go back and fix a bunch of documents. Appreciate
    your help in this matter.  Mark
    From:   SnakEyez02 <[email protected]>
    To:     Marcusb B <[email protected]>
    Date:   02/13/2012 09:20 PM
    Subject:        WP Greek Century in Mac doesn't work with
    Dreamweaver
    Re: WP Greek Century in Mac doesn't work with Dreamweaver
    created by SnakEyez02 in Dreamweaver - View the full discussion
    Fonts don't work on the web like they do in print.  Any font you use on a
    website will require that the end user have that same font installed on
    their system.
    I did try to load that font from a free source (assuming this is how you
    got it).  It is a PC TrueType and doesn't appear to work at all on the
    Mac.  Now if you are looking for just a few characters you can code this
    into the HTML:
    http://tlt.its.psu.edu/suggestions/international/bylanguage/greekchart
    .html .  As far as other fonts, this greek font seems to work on Mac:
    http://www.dafont.com/ancient-geek.font .  But again, it's not a web-font
    so you won't be legally allowed to use it on web pages, and it will only
    work if the end user has that font installed on their system, unlike the
    HTML entities previously linked.
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/4205108#4205108]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/4205108#4205108]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Dreamweaver by email or at Adobe Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • Can I use my MacBook Pro with 10.7.5 with Epson Stylus Printer photo R340

    MacBook Pro with 10.7.5 with Epson Stylus Printer photo R340 can I make them work togather?

    Try resetting the SMC. The phone connection is only supported for tethering. I know nothing about the other device.
    Barry

  • Laptop unable to 'communicate' with hp 3050a printer wirelessly

    laptop unable to 'communicate' with hp 3050a printer wirelessly, could it be the virgin superhub? (been on the phone to Virgin for an hour they said not their problem) i can eprint and print  using a usb cable. Printer displays 'connected' message.
    OS windows 7 64 bit. Tried uninstalling etc, 11 hours on still no joy!

    Hi,
    Did you try HP Auto Wireless Connect?
    1. Restore network defaults from the printer front panel. Wireless>Wireless Settings>Restore Network Defaults.
    2. Download the printer software, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-93470-1&cc=us&dlc=en&lc=en&...
    3. Before you run the sofware, make sure you computer is wirelessly connected to the Virgin and that the connection is a saved profile(automatically connects). You can check this in the Manage Wireless Networks section of the Windows Network and Sharing Center.
    4. Run the software and select the Wireless connection option.
    5. Select Yes to run HP Auto Wireless Connect.
    Please click the blue Kudos star in the post that resolved your problem. Doing so will help other forum members find their solutions too.

  • AIR doesn't communicate with my server - PHP issue

    Hello,
    So I have made an AIR application where the file communicates with a PHP file in order to display data.
    I have WAMP installed on my computer, and the application works when I test locally using WAMP but if I upload the php on an online server(I tried on two of my servers) and run the AIR application it seems that it doesn't communicate with the server so no data are displayed.
    var url:URLRequest = new URLRequest("http://www.test.com/test.php")
    This is how I call for the php on AS3, like shown above.
    Any suggestions?
    The php file gives no errors when I browse it online so, I suppose there something else going on?

    There are no errors, on either the php files stored online neither the flash swf.
    The only file scalled from an online server are the PHP.
    I suppose I don't need to pack these PHP when publishing the air file, since they need to be called from an online server?
    Very tricky since there are no errors, I would appreciate any help since this is an urgent project.
    //EDIT:
    So I just removed the http:// from the urlrequest to the site that the PHP is stored and I get this IO error:
    Error #2044: Unhandled ioError:. text=Error #2032: Stream Error. URL: app:/test.com/test.php
    at my_fla::test_1/setPHP()[my_fla.test_1::frame1:38]
    Notice the app:/ ? why is it there? Could it be the issue? I am not sure, but if you link to a local file, like "test.php" it works, but when adding a URL it doesn't...

  • HT203175 itunes screen remains black and unresponsive and doesn't communicate with computer

    My itunes remains black and unresponsive and doesn't communicate with computer.with computer

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Firefox 3.6.27 (Mac) doesn't work with Google Blogger's Blog Archive links?

    I noticed this just started happening about week ago. Firefox 3.6.27 (Mac) doesn't work with Google Blogger when clicking in the Blog Archive sidebar links. I can't upgrade because I'm using a PowerMac. Anyone have a suggestion? Thanks!

    I press the combination after having some of the document's text selected, otherwise there wouldn't be anything to apply the paragraph style in the first place. But the real thing is I do the exact same with other paragraph styles combinations (Cmd+Alt+1, Cmd+Alt+2, Cmd+Alt+4, Cmd+Alt+5...) and it works. In Safari, even the one I'm interested in works (Cmd+Alt+3). The natural solution, it appears to me, would be a shortcut conflict, but I can't manage to find it, not even disabling my four add-ons (Adblock Plus, bookmarks-deiconizer, Customizable Shortcuts, YouTube to MP3). The Google forums are not finding a solution either. Anyway, thank you for trying.

  • Problems with Epson R2400 printer and Mac

    I'm a photographer and I switched to an imac a while ago. When I tried out my Epson R2400 printer, it worked really awful, comparing to when I used it with PC. I still haven't managed to fix these prolems. The printer menu is diminished (less options, many inaccessible in grey), there are problems with print density, with color adjustment, what I see on my screen is not what I get on my print (a black and white photo in grayscale mode can appear almost light blue when printed), there are even alignment problems (centred photos appear closer to the left edge of the paper). And I don't have a clue why all this is happening. The printer driver I installed is apparently the latest one. So I don't know where to go from here. I have installed and I use the profiles of the specific papers I'm using, but the results are NASTY. Please help.

    By the way, I have read the links under "More like this", but those threads don't seem to clarify my question. Originally I had installed my Epson driver from the original (old) Epson CD. When that didn't work I uninstalled and installed the newer Epson driver from the Epson's site. Doesn't work and the problems I'm having are the ones I mentioned above. 

  • Illustrator CS fails to communicate with Epson Artisan 800 Printer?

    I've recently added an Epson Artisan 800 to my work station. It is recognized and prints from all applications with the exception of Illustrator. I make sure that all page set-up's and print set-ups on pre-print screen are set for the Artisan 800. When I send a file to print, the printer icon bounces and just as soon as the job title appears in the print que, it disappears, without ever communicating with the printer or sending the job.
    Is there a compatibility issue with CS and the Artisan 800 that anyone knows about?
    ..... that is the old "CS", not 2. 3 or 4

    I run 10.4.11 and am unfamiliar with that specific Epson. However step one with Epson troubleshooting is to do any OS updates then download and install the latest Epson driver, even if what you are using is current. The new install will simply install over the old installation. Repair Permissions via Disk Utility immediately before and again immediately after both the OS updates and the printer driver installation.
    Once good Epson paper and a new driver installation are done the final step is to carefully follow Gary Ballard's excellent color management tutorials:
    <http://www.gballard.net/psd.html>
    Good luck!
    -Allen Wicks
    P.S. Epson tech support for consumer printers has always been worse than useless. Specialized support for the pro printers is pretty good.

  • HT204135 Photoshop CS5 Printing Problem on iMac with Epson 3880 printer

    All of a sudden I can't print from Photoshop CS5 on my iMac with OSX Mountain Lion installed.  I am able to print from Illustrator, however.   Have tried to update the Epson 3880 driver. After clicking on "Print", it doesn't register with the computer, and from then on, the "Print" option is greyed out.

    Are you using moab icc profiles or are you using one of the epson profiles?
    I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
    At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
    Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
    Hope so
    Tom

  • Communication error with Epson R2880 printer using Snow Leopard 10.6.4

    I am having trouble printing with my Epson R2880 printer on my Mac Pro running OS X 10.6.4 with the most recent software updates. The printer prints about a quarter of the print and then quits giving a "Communication error" message. I have tried uninstalling and then reinstalling the printer and downloading the latest driver form Epson. My other printer, a cheap Canon printer, works fine on the computer with 10.6.4 and the R2880 printer works fine with my old G5 running 10.4.11. Any ideas?

    Thanks John. I tried deleting the Epson printer folder from the library like you said and then checked for Software Updates. But Apple did not indicate that there were any for my OS (probably because I had installed the latest OS update this morning). So I installed the driver from the Epson site with the printer folder removed. But this did not work because when I tried to print the computer indicated that there were missing files. So, I reinstalled the Epson folder that I had just moved to trash, deleted the new Epson folder, then tried reinstalling the Epson driver with the original folder in place. THIS WORKED! Finally, I am off and printing but with little knowledge gained about the inner workings of my computer.

  • Color cast when printing from Lightroom with Epson 3880 printer

    Just got an epson 3880 printer. Printing on epson paper is fine. But printing on Ilford or Moab or other papers from lightroom and photoshop have a terrible magenta color cast.
    WHen I print the same image from Preview, with the same print driver settings, it looks fine. So somehow the adobe apps (or my settings) are messing up the color sync.
    I used to have an espon 2400 which worked just fine.
    I have Mac OSX-10.9.1. Monitor is calibrated. (Prints to epson paper with their profiles look great...it's just other profiles that are really bad).
    I need help!

    Are you using moab icc profiles or are you using one of the epson profiles?
    I always use the moab profiles which you can download from their Web site. This way you are matching the specific epson printer with the specific moab paper.
    At that point you change the printer manages color to Lightroom manages color and select the specific profile. Very easy to do - they even have instructions on the Moab site for installing the profiles if you haven't done that.
    Once installed you can also use them through the system print dialogs in PS but it is really much much easier to use in LR - Since coming on board with LR last summer, I have switched to doing ALL printing from LR. Since you mentioned that you are having the same problem with LR and PS, I'm betting you are using epson profiles and this will solve your problem.
    Hope so
    Tom

  • PC doesn't communicate with HP Color Laserjet 1600

    Hi, my Laserjet 1600 printer worked fine with my old pc. Now i have a new pc with Windows 7 ultimate 64 bit and somehow it can't communicate with my printer. Printer does work. cable isn't broken. Driver won't install either. What can be the problem? I also tried the HP universal printing PCL 5

    Hi Reen1604,
    I suspect your question would be better answered in the HP Enterprise Business Community,  as the HP Laserjet 1600 is a commercial model.
    My technical expertise is with consumer products and software, I am sure the commercial folks would be happy to help if you re-post your question for them to answer. The HP Enterprise Business Community is an HP Forum designed for the Commercial and Enterprise customers to help one another. I am sure you will find some HP folks there to help too.
    Click here to view the Printing and Digital Imaging.  When the page opens you will see the option to 'Log in' or 'Register Now' on the right. The commercial forums are separate from the consumer boards, thus you will need to register if you don't already have a commercial account.
    You may find the HP Color LaserJet 1600 Printer page helpful while you wait for somebody in the commercial Forum to respond to your inquiry.
    Best of luck.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • MacBook Pro won't communicate with wireless HP6500 printer

    My MacBook Pro late  2011 will not communicate with my HP6500 Officejet all-in-one. I have tried everything imaginable to fix the problem. My iPad mini works wonderfully with the same printer.

    Hi there sailor ricky,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    -Griff W. 

Maybe you are looking for