Mac doesn't recognize iTouch but has before?
I've had my macbook and ipod touch 3rd generation since august. I plugged my ipod into my laptop this morning and it worked. My ipod died so I plugged it into my laptop. It has been plugged in for at least an hour and still won't turn back on.
Welcome to the discussions,
charge your device at least 10 min, using the adapter before you connect it again to your Mac in recovery mode.
Recovery mode: http://support.apple.com/kb/HT1808
Similar Messages
-
my iPhone has a black background and the classic rotating wheel. I try it to put it in DFU but when I turn it on it goes back in this modality and my mac doesn't recognize the phone. HELP ME!
That is correct.
That is the price of a replacement iphone once your iphone is outside of the warranty period -
I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive, how can I fix this
I've tried it but since I'm using a USB disk drive it keeps freezing up or showing you a folder blinking folder with a question mark. (?). When I start the mac up I hold the control button until the Mac OS install disk shows up. My hard drive doesn't show up anymore. Is there any other button I have to hold down to bring a different menu up. I have also tried to boot up holding control and C and nothing happens. Thanks for the help so far
-
Mac doesn't recognize shuffle and opening iTunes with Shuffle crashes Mac
I recently updated to iTunes 7. Now my Mac doesn't recognize my year old shuffle when I plug it in, and when I open iTunes it freezes the Mac.
I have been monitoring this forum on and off for weeks looking for a solution for my shuffle disfunction and this appears to be it.
My shuffle would play songs and recharge on my iMac but would not be recognized by iMac by any of the expected means. This problem started after updating to iTunes 7. Tried uninstalling 7, and any of the other suggestions here that could work with out communication between iMac and shuffle, since the shuffle would not link to the computer.
I had resigned myself to a shuffle that played only the songs currently loaded until it finally died. But, using the 06-06-28 updater worked for me as well, although it was a bit of a quirky process. Once launched, the updater immediately recognized my shuffle (first sign of life in weeks). When I chose the update button, it ran through an update but said there was an error after finishing and that I should disconnect, re-connect, and try again.
Just disconnecting the shuffle mad the updater crash. I had to restart my mac, but when restarted my shuffle launched itunes and there it was. It appears to be fully functional again and I jut cancel when it says there is an update available for my iPod.
Thanks djSTP!
iMac flat panel Mac OS X (10.3.9)
iMac flat panel -
I wonder why CS6 is not complete when downloaded? Why should I have to download JBX? If needed it should be a part of Indesign. My Mac doesn't have a name of a file to open and download, so now I simply don't have CS6 and can't convert my book to Kindle for sales on Amazon.
Terribly disappointed!
/mariaI am using OS X 10.9.2 and I'm attaching the error message I get. I am
trying to install InDesign CS6 in order to convert my book to Kindle, but
Amazon's plug-in only works with InDesign CS6 NOT with InDesign CC.
I am attaching the Kindle Plugin also.
2014-05-07 22:19 GMT+02:00 Jeff A Wright <[email protected]>:
Cannot open CS6, it craves JBX-plugin, and my Mac doesn't recognize
the file so I can't download created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright>in *Creative
Cloud Download & Install* - View the full discussion<https://forums.adobe.com/message/6363126#6363126> -
My Mac doesn't recognize my Canon MVX330i
Hi,
I have just joined the ranks of mac users, days rather than weeks, so my question may sound silly. I am trying to import video from my canon mvx330i(tape not card) but my mac doesn't recognize the camera, let alone import it. According to the tutorial, I should just connect to the usb port and away I go, but alas no joy. Am I missing something??
expatbeMeg The Dog wrote:
Hi -
Tape based cameras such as yours require a firewire connection, not a USB connection. The USB out on the camera is used to transfer any digital stills you have taken on the storage card. The video, because of the way DV works, must be sent to the computer via firewire.
If you have a recent Mac, you will probably need to get a firewire cable that plugs from your firewire 800 port on your computer to your camera's firewire port (on Canon cameras I believe the port is labeled "DV").
These cables are available at camera/electronic/computer stores and on the internet.
Hope this helps.
Meg The Dog wrote:
Hi -
Tape based cameras such as yours require a firewire connection, not a USB connection. The USB out on the camera is used to transfer any digital stills you have taken on the storage card. The video, because of the way DV works, must be sent to the computer via firewire.
If you have a recent Mac, you will probably need to get a firewire cable that plugs from your firewire 800 port on your computer to your camera's firewire port (on Canon cameras I believe the port is labeled "DV").
These cables are available at camera/electronic/computer stores and on the internet.
Hope this helps.
Meg The Dog wrote:
Hi -
Tape based cameras such as yours require a firewire connection, not a USB connection. The USB out on the camera is used to transfer any digital stills you have taken on the storage card. The video, because of the way DV works, must be sent to the computer via firewire.
If you have a recent Mac, you will probably need to get a firewire cable that plugs from your firewire 800 port on your computer to your camera's firewire port (on Canon cameras I believe the port is labeled "DV").
These cables are available at camera/electronic/computer stores and on the internet.
Hope this helps.
Thank you very much, you have saved me a whole lot of heartache and educated me further on my mac path. -
I have firefox OS x 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what else can i do?
Application
User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_5) AppleWebKit/536.28.10 (KHTML, like Gecko) Version/6.0.3 Safari/536.28.10
Ok, how's this? and flashback isn't installed, what else? -
How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.
Ask the headset manufacturer.
Barry -
My mac doesn't recognize my canon camera files called .mts Is there app to download?
Hi, could someone please help me with the problem above? For whatever reason, my mac doesn't recognize the files created by my canon video camera.
Any ideas? Cheers steffenThere's an app for that:
http://www.iskysoft.com/topic-mts/convert-canon-mtsm2ts-files-on-mac-os-x.html -
I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.
I had no problems on snow leopard.
thanksWell I found my answer…
http://www.focusrite.com/answerbase/en/article.php?id=1159
At the time of writing, the following products arecurrently not working with OS X 10.7:
Saffire PRO 14
Saffire PRO 24
Saffire PRO 24 DSP
Saffire PRO 40
Liquid Saffire 56
Liquid Mix HD
Forté Suite
Scarlett Plug-In Suite
Focusrite is committed to providing support for ourproducts with the latest operating systems. We are currently working onproviding full support for our products with OS X Lion, and these will beavailable as soon as they are complete.
Please check this page regularly for the most up to dateinformation regarding OS X 10.7 Lion compatibility information. -
I paid for an Adobe PDF Pack and received an order number, but the program doesn't recognize the upgrade and will not run for me.
If you're in the U.S., try calling 1-800-MYAPPLE.
-
My Mac doesn't recognize my ipod nano at all, what can I do?
I tried to restore my ipod nano because I bought a new Apple computer with Mac OS X system, nano was in Windows format. But I failed to do the restore and nano doesn't respond me anymore. Somehow I managered to put it in disk mode by checking all the solutions available, but when I reconnected nano to computer, my Mac just doesn't recognize it at all and ipod shows nowhere in my computer. How can I restore my nano with this situation? any suggestion? some help??
Hi Pace,
Welcome to Apple Discussions
Does your iPod show up on the desktop. You may want to look at...
"The Five Rs"
Knowledge Base Document #60950 on iPod missing in iTunes and Mac desktop
Knowledge Base Document #93718 about iPod appears on the Mac OS X desktop but not in iTunes
iPod FAQ says,
"Question: I have both a Mac and a PC. Will my iPod work on both?
Answer: No, not at the same time. iPod is configured for either Mac or PC. You can use the iPod Updater to restore iPod to work with a Mac or a PC (depending on which version of the updater you use). See "Restoring iPod to factory settings" for more information. Note: Using the iPod for Mac on a PC, or using the iPod for Windows on a Mac, is not supported by Apple. FAT32 is the format used by Windows, and while some FAT32 iPod models may work with your Mac, Apple only supports using the iPod shuffle in FAT32 format on Mac.
Question: Can I use an iPod formatted for Mac on a PC, or an iPod formatted for Windows on a Mac?
Answer: It is not possible to use an iPod formatted for Mac with Windows. This is because Windows does not support the HFS Plus file system and therefore will not see the drive.
You can convert an iPod formatted for Windows into an iPod for Mac by using the iPod for Mac Software Updater on the Apple website. Note that once it is reformatted, it will only work with Macs. You need Mac OS 9.2 or Mac OS X 10.1 or later to reformat an iPod for Windows into an iPod for Mac.
Note: Using the iPod for Mac on a PC, or using the iPod for Windows on a Mac, is not supported by Apple."
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight.. -
Mac doesn't recognize external HD anymore. Any help is appreciated.
Hi Everyone. Suddenly, my MAC mini doesn't recognize my external hard drive any more. It was fine for years and today it's not "there".
I tried connecting with different fire wire cables and still, same problem.
I also tried connecting the external HD to my iMac and still, doesn't recognize it.
I tried restarting many times, still, same problem.
I tried disconnecting all cables and power cords, reconnecting them and powering on, and that didn't resolve it.
I have been searching the web all morning for ideas and can't seem to find a solution.
The external HD is a Maxtor III 300 GB. Older one but was big enough for my needs.
I was reading that sometimes doing a software update might cause an issue with external HDs. I just don't know how to resolve that if it is.
This hard drive is formatted for the Mac.
According to Maxtor I do not need to update my drivers. I was thinking that maybe one got lost.
Any help is appreciated. Thanks in advance!
ChristineIf only the mini couldn't read it, that would lead down one path. However, if both the mini and the iMac can't read it, that sort of points to an issue with the drive. Do you hear the drive power up? If you have an external power supply have you tried that or do you use that with it?
It's possible that the hard drive is in fine condition, and it's the case electronics that are acting up. You should be able to pull the hard drive out of the Maxtor case and put it into another external case, to read the hard drive, assuming the drive itself is OK. -
My mac doesn't recognize my password when I log off
When I start my computer it recognize my password fine but when I log off or it goes to sleep it doesn't recognize my password anymore and it starts asking for keychains and stuff so I have to shut it down in order to login again, any help?
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access. -
Mac doesn't recognize headphones till it sleepswhat should i do ?
macbook air 13 doesn't recognize headphones till i put it on sleep then it works
i read alot of threads about that problem and no solution till now
so anyone can help with that ??!Likely not compatible with Yosemite. There is a version 5. This may help:
http://pearsonsupport.helpserve.com/Knowledgebase/Article/View/329/0/ldoce5-patc h-for-mac-os-x-users-with-flash-player-103
Otherwise contact Parsons
http://www.pearsonlongman.com/dictionaries/support/ldoce-updated-support.html#m0
Maybe you are looking for
-
My MacBook Pro 15-inch with NVIDIA GeForce 8600M GT graphics processors just failed. Do you guys know if apple still fixes them?
-
Update will not work, I get an error message that says error 7 (windows error 126
The new update will not work for me, I am running Windows Vista. I have never had any problems installing updates before, but this time I get a message So I found the directions to uninstall itunes, I uninstalled itunes, apple software update, then I
-
Idvd settings for burning and playing on TV
hi, I just bought iLife 8 and made my first dvd project. It all worked fine besides the last step: playing it on a TV. On idvd 6 all went fine, but I don't remember how I did the job then On TV I can see the theme, choose from the menu, hear the musi
-
Playstation 3 hardwired using fios
I'm currently with cablevision and have my ps3 hardwired to a d-link wireless router which is connected to their modem. I have Verizon coming to set up fios and what I would like to know is can you still hardwire a ps3 the same way. We at one time tr
-
Slow performance on opening data form in workspace
hi, when we try to open a data form in workspace its taking more time to open. how increase the performance of it . its 11.1.2.2version,windows 2003 and 64-bit thanks in advance.