Mac doesn't show Ipod icon and doesn't open ITunes automatically

I really look for a good advice to solve this problem, the 2 Gb device is property of my 11 y.o. daughter.
The IPod Nano is two months old (Christmas), set up and installation went ok at the time. It works properly. Tonight I connected it to one of the Usb ports of my Mac Mini dual core but nothing happened. No icon, no ITunes opening.
ITunes is version 7.02 .
Thanks for help,
Spincervino

Is it appearing on your computer's Finder?
See these articles:
iPod does not appear in iPod Updater or iTunes in Mac OS X
iPod missing in iTunes and Mac desktop
-Kylene

Similar Messages

  • Help, My Safari doesn't show its icon and will not open?

    So heres some help for you:
    1. Im a new member, not an idiot when it comes to computers but in no way very expeirenced and knowledgable.
    2. I recently was informed I had 0 disk space left, so I deleted a lot of stuff and feel I may have accidently deleted something..
    3. My safari does not open
    4. It doesn't show the traditional Compass Icon for Safari it is a blank white page..? With the Applications Logo on it.. ( see picture below )
    5. Yes, I basically only registered so I can ask this question ...
    6. What on earth can I do to fix it!
    - Heres a pic..
    Quickpost this image to Myspace, Digg, Facebook, and others!

    Hi Lax561,
    Welcome to discussions ...
    I can see that Safari is NOT in the Dock ...
    Did you check out if Safari is still in the Application folder ?? open Finder an go to the application folder.
    If it's still there than you can drag a copy to the Dock.
    Do the following ... Select Safari icon an hold down the mouse an the Option key ad the same time while dragging to the Dock. During dragging you will see a + (plus) next to the Safari icon.
    Place the Safari icon in the Dock where you like it, next to the Fire Fox icon is maybe the best place to put it.
    Post back with the results ...
    Dimaxum

  • Apple TV doesn't show main menu and cannot connect to iTunes store

    I've been using my Apple TV almost everyday for the past week and i've had it for awhile and all of the sudden it only shows the "computer" and "settings" buttons. It looks like it's connected to the internet because it has an IP address, but it still doesn't show any of the usual buttons on the main menu. When I go to test network it says "cannot connect to itunes store," and says the same when I put in my username and password. I just entered same same username and password in my itunes with no issues so I know the username and password are correct. I've restarted my apple tv a couple of times. I tried to restore it and it says "the update was not successful. The apple tv update couldn't download at this time. Try again later." Agh! I don't know what else to do! Any suggestions are appreciated!!!! Thanks!

    A reboot will reset the connection to the network, as those 2 icons are the only ones that don't require an internet connection they are the only ones that will show up in the event of such an issue.

  • Mac wont play videos on safari and will not open itunes

    imac will not open itunes or run videos on safari.

    Hello,
    Open Console in Utilities & see if there are any clues or repeating messages when trying to open iTunes.
    Are these Flash Videoes?
    Out-of-date versions of Adobe Flash Player do not include the latest security updates and will be disabled to help keep your Mac secure. If Safari 5.1.7 or Leopard Security Update 2012-003 detects an out-of-date version of Flash Player on your system, you will see a dialog informing you that Flash Player has been disabled. The dialog provides the option to go directly to Adobe's website, where you can download and install an updated version of Flash Player.
    Additional Information
    If you need to re-enable an out-of-date version of Flash Player, you can do the following:
        1.    Navigate to the /Library/Internet Plug-Ins (Disabled) folder.
        2.    Drag "Flash Player.plugin" into /Library/Internet Plug-Ins.
        3.    If the browser is running, quit and restart it.
    http://support.apple.com/kb/HT5271

  • Has anyone found a fix to the code on Google Toolbar (NOT a Google search box) to make it work with Firebox 9.0.1? my tool bar doesn't show any icons and says its not compatible. I've tried to fixes to no avail.

    Firefox verson: 9.0.1
    Google Toolbar version:
    I've tried two fixes:
    1. Went to Firefox Profiles at AppData >Roaming > Mozilla> Firefox > Profiles > Default Profile > Extensions and look for the directory where the Google Toolbar is installed. Mine is located at {3112ca9c-de6d-4884-a869-9855de68056c} directory.
    Changed the maxversion to 10. Find this line <em:maxVersion>4.0.*</em:maxVersion> to <em:maxVersion>10.*</em:maxVersion>\
    2. Went to Lib dircotry and opened up the file toolbar.js with a text editior and replaced all www.google.com/accounts WITH: accounts.google.com

    You can turn off compatibility checking, but more and more of the Google Toolbar will not work. Google is no longer supporting the Google Toolbar so you should use the alternatives.
    Hi Mark,
    See http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
    If you have an aspect that is not covered, indicate what that is; otherwise, expect you to be fully functional within 1-2 weeks.
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • HT201343 My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    The Airplay icon will not display if the OS is unable to locate any Airplay devices.
    I would check that both devices are connected to the same network and maybe even power cycle the network devices - eg router etc
    Maybe even try to connect both devices to another network like an iPhone personal Hotspot and see if that helps to isolate the problem

  • After apple wiped my hard drive, my computer no longer recognizes my iphone 4.  It will charge, but doesn't show up in my sidebar or in itunes.  My computer says there are no software updates available.  I'm running OSX 10.5.8 and itunes is 10.3.1.

    After apple wiped my hard drive, my computer no longer recognizes my iphone 4.  It will charge, but doesn't show up in my sidebar or in itunes.  My computer says there are no software updates available.  I'm running OSX 10.5.8 and itunes is 10.3.1.

    After apple wiped my hard drive, my computer no longer recognizes my iphone 4.  It will charge, but doesn't show up in my sidebar or in itunes.  My computer says there are no software updates available.  I'm running OSX 10.5.8 and itunes is 10.3.1.

  • I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

    I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

    I had this and fixed it.
    I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
    After lots of hunting, I found the Signature Folder. It's in:
    Yourusername>Library>Mail>V2>MailData>Signatures
    Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
    Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
    Since this was literally a clone of my previous setup to a new machine, here's what I did:
    1. Quit Mail
    2. In Problem machine, go to
    Yourusername>Library>Mail>V2>MailData>Signatures
    3. Move the Signatures folder someplace safe, but out of the MailData folder
    4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
    5. Start Mail on the problem machine
    This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
    Hope this helps

  • TS3297 I don't get an error message. the thing just hangs up or doesn't show the store and when I go to listen to a song it found,it won't play it or allow me to purchase songs.

    My ITunes doesn't show an error message,it just doesn't show the store and when I can search and it finds the song,I can't play it or buy it.

    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • When I open a message in Mail it doesn't show the Green and Red buttons, so that I can Minimize the Message ... What should I do ?

    When I open a message in Mail it doesn't show the Green and Red buttons, so that I can Minimize the Message ... What should I do ?

    Press the escape (esc) key to exit full-screen mode.

  • Ipod shows sady icon and  spinning sound comes from the ipod

    Hi all,
    Please help me , my sis gift me ipod and after one year i put my ipod on my cell phone cover for few minutes accidently which is having magnetic lock, after few minutes my ipod shuts down , when i want to restart the ipod, it sounds like the hard disk is spinning or me be other component producing sound. when i connect it to my laptop it is not connected to my system and even recoginised my my itunes. first of all it is not reseted by using the keys MENU & center button, when i use center and play/pause button, an apple logo appers then i on the hold button after a few seconds the message appers that u need to restore the ipod using itune after a minute it shows donot disconnect in black colour , when i connect it to my system it detects in windows as a external device connected but the dive icon dosent comes, after a few minutes it disappears automatically and shows saddy icon, after that it shows the message " Please wait very low battery" and some processing appears on the sceen. Even one time itunes detects my ipod and says to restore the ipod, but when i click the restore icon, it says your ipod is not detected.
    If i connect my ipod to my ipod charger or usb cable it shows sady icon and then disssppears with sound of clicking/spinning,and message appears on screen" Please wait.. very low battery. with processing icon." and then again starts after 2-3 minutes showing apple logo and then sady icon.
    Please help me to get rid from this issue.

    Have you had a chance to look at this troubleshooting page? It may be of some help:iPod displays a sad iPod icon
    You can also check out this extensive user post, however read it carefully if you get to the Last Resort section: Mitch's Sad iPod and Exclamation mark post

  • TS1286 At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    At my PC startup, I get an error message "AppleSyncNotifier.exe--Entry Point Not Found"  My iPhone now doesn't show up as a Device in either iTunes or My Computer on my PC. I've uninstalled/ reinstalled iTunes & run diagnostics-no luck. Ideas?

    I think my problem is fixed now.
    For the fun of it, I reinstalled iTunes 9.2.1 today (using the exact same installer as I did yesterday), but this time I didn't uninstall iTunes first. As expected, iTunes recognized my iPhone (as I expected it to, until my next reboot).
    A few minutes later, Software Update showed up and among the updates is "iPhone SDK Compatibility Update". The description indicates that installing this should fix an issue where iPhones and iPod touches aren't recognized by iTunes. Isn't that interesting?
    I installed that update and most of the others waiting for me (including Java, Safari 5.0.1, and a few others - not 10.6.4 though, due to the issues with nVidia graphics cards). After the reboot, I started iTunes, and it saw my iPhone!
    So, if you're having this same problem, I'd recommend tracking down this update and see if that does the trick for you. Hopefully it will.

  • IPhoto doesn't recognize .jpg files and can't open it. What may I do now?

    iPhoto doesn't recognize .jpg files and can't open it. What may I do?

    a common problem is that you don't have permission to upload those files, but it is an easy fix
    1) Finder
    2) Users(it should have the account name on it)
    3) pictures
    4) right click on iphoto library then click info
    5 on the bottom of the new window there should be a sharing and permissions tab
    6) make sure you have permission to read & write
    The only other problem I can think is that you are having problems with hard drive space. if so you might want to clean up your hard drive to free up some space. please let me know if that worked for you.

  • Why does my I MAC boot but shows no display and fan is loud?

    Why does my I MAC boot but shows no display and fan is loud?

    Reset the SMC a couple of times and then post back. Instructions are:
    Shut down the computer. 
    Unplug the computer's power cord and all perihperals.
    Wait fifteen seconds. 
    Attach the computer's power cord. 
    Wait five seconds, then press the power button to turn on the computer.

  • Set "always show all icons and notifications on the taskbar" via Group policy

    Any ideas on how to set "always show all icons and notifications on the taskbar" on a set of users?
     I thought it would be under User Configuration\Administrative Templates\Start Menu and Taskbar, but I cannot find it.
    Anyone know if this can be enforced via policy?

    Hello,
    Thank you for your post here.
    Unfortunately, there is not any group policy settings which can set "always show all icons and notifications on the
    taskbar".
    To distribute the setting, you can create a default domain user profile and copy it to the following network share.
    When the domain user account is first logged onto the domain, the default profile will be applied.
    \\<Server_name>\NETLOGON\Default User.v2
    How to customize default user profiles in Windows 7 and in Windows Server 2008 R2
    http://support.microsoft.com/kb/973289
    This would only apply if a new profile is created, not for existing ones.

Maybe you are looking for

  • Adobe reader and the video card

    We are experiencing an issue on a couple of PC's with a pdf created in Adobe Pro 9. It appears that when the PDF is opened the video graphics card is affected. Colors and images do not display properly.  The only resolve is to remove the PDF document

  • How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

    How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I hav

  • Inconsistent behavior in TestStand and TestStand UI for the same sequence file

    Solved! Go to Solution.

  • Plsql index

    Hi, I have the below code. Please let me know why i am getting bdms error. emp table has only one column- idd insert into emp values( 1) declare type emptabtype is table of emp%rowtype index by pls_integer; empTab emptabtype; begin select * into empT

  • RA&R Rule Script assistance required

    Hi Forum guru's, We are customising RA&R, Ver 5.3, SP 10 and require some assistance with the SQL script.  We are attempting to disable +-4600 rules at ACTION LEVEL and the tables we are referering to in the script are AC_RULE & AC_HEADER. The script