Mac Driver for Nokia 6255

Well, with a NO PC card slot on my new MacBook, I was wondering how do I connect to the net using my Nokia 6255(CDMA conenction) via the the Nokia DKU-2 USB cable. Where can I get the drivers for this & how do I go about it

From what I see there is no Mac Driver for this phone and usb cable yet:
http://www.europe.nokia.com/nokia/0,8764,81914,00.html.
It is only provided driver for windows. And if you have xp installed from boot camp in your MacBook, you could use that driver on XP side.
That phone is not sold in us market yet as stated on nokia site:
The Nokia 6255 phone has not been authorized as required by the rules of the Federal Communications Commission ("FCC"). This device may not be sold or leased or offered for sale or lease, until FCC authorization is obtained.
so that could be why there is no driver for Mac yet.

Similar Messages

  • Mac driver for Nokia CA-42 data cable

    I bought the Nokia CA-42 data cable w/o realizing that it only supported PC operating systems. I want to sync my Nokia 6820 phone w/iSync 2.2, but I'am currently stalled. Has a driver for the Mac been created?
    help needed here!
    eMac   Mac OS X (10.4.6)  

    I bought a CA-42 cable for my Nokia 3220. I have Virtual PC v.6.1.0 and Windows XP Pro installed on my eMac. I have enough RAM to handle running VPC/WinXP and Mac OS X at the same time (768 MB). Can I use the cable to connect my phone to my Mac, but while running VPC and WinXP? The phone SHOULD think it's connected to a PC shouldn't it?
    I want to use the Nokia PC Suite to manage my phone, but also to back it up, as I want to have it flashed, and need to save everything, first.
    I haven't been successful, so far, and would like to know if using Windows on VPC can be done, what settings I need to adjust, or if you have to actually have a PC (which would be a real downer [G]). This would be so much simpler if Nokia would just come out with a Mac version of their suite.Thanks.
    eMac   Mac OS X (10.3.9)  

  • Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

    i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

    First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

  • I am looking for a Mac driver for a Muratec MFX 1430 printer/fax/copier.  Is there one out there for a Mac?

    Looking for a Mac driver for a Muratec MFX-1430 printer/fax/copier
    is there such an animal out there?

    http://www.muratec.com/new/support/drivers.asp does not appear to support that model at all on the Mac.
    Some open source drivers* may exist to support it.
    * Links to my pages may give me compensation.

  • Mac driver for OS 10.6.8

    I just purchased HP Envy 7640 printer, and there are no drivers listed for MAC OS 10.6.8.I can  not upgrade the OS, as sever critical programs will not run on Mac OS 10.10. what recourse do I have?

    Hi,
    I afraid you will have to upgrade the OS for the printer to fully work ir get an older model which is compatible with Snow Leopard, the printer is only supported on Lion or newer OS versions as you may find listed below (Under the System Requirements section):
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04353671&cc=us&dlc=en&lc=en&product=6617269&tas...
    As a workaround you may use an alternative driver, but that will only allow printing from the Mac.
    For that download and install the following package:
    http://support.apple.com/kb/DL1770?viewlocale=en_US&locale=en_US
    Next connect the pritner to the Mac or to the same network.
    Open System Preferences > Print & Fax and click the plus sign.
    select the listed 7640 printer and click the Print Using drop down and then on Select Printer Software.
    Select the HP ENVY 5530 from the list and add the printer, that should allow printing to the 7640 printer.
    Basic scanning can be done via the EWS interface by opening the Scan tab, that only applicable for a network connection and only provide basic scan options.
    It can be reached by typing the printer IP address into Safari.
    Hope that may help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Mac Driver for the HP C3180

    Where can I get the Hp C3180 newer driver? Can you tell me the exact web site?
    Thank you

    Hi PanchoLopez
    This is the newest one i can find.
    Print Driver for HP Photosmart C3100/C4100 series - Mac OS X v10.3 and v10.4
    You could also click on Notify me when new software is available, as HP may have something for you, not yet listed on their site.
    If this solves your question, please consider awarding stars, by checking the helpful or solved button above on the post. This is not a requirement, merely an expression of thanks.
    regards roam

  • I HAVE AN ORTEK 810 USB KEYBOARD.  WHERE CAN I FIND A MAC DRIVER FOR IT? THANKS

    I havean ortek mck810 sub. are there MAC drivers for the keyboard?? thanks

    yes-I checked for you and yes, there's a driver. and yes, my experience has been that you can plug pretty much any usb keyboard into your Mac and it should work, at least the basic functions will work fine. Tried it out with a keyboard I found in the dumpster near my condo, and it worked, so there's that, anyways
    there you go
    John B

  • Here drive for Nokia XL: only in one country???

    Is there a way to drive into several countries with nokia XL?
    here drive+ is not aviable for nokia XL
    Solved!
    Go to Solution.

    Hi navio1973,
    As of now, it is not possible since the HereDrive app is not present for downloading in the Store. However, I suggest that you contribute your suggestions regarding this by going to your phone's settings > Feedback to Nokia. Hope this helps!

  • X64 Driver for Nokia DKU-5

    Hello, Can anyone tell me if there is a downloadable driver for x64 Edition for DKU-5. I mean how can I connect my phone with my PC? As soon as I plug-in the cable, the driver do not instal. Please help.

    Nokia's support pages only have drivers for "Windows 98SE/ME/2000/XP", and I suspect nobody else has written any 64-bit WinXP drivers for that cable.

  • Driver for Nokia in car modem 6090

    Where can I source a driver for the Nokia model:6090 type:NME-3 modem for Windows 2000?

    if you cannot find anything on Google then sadly there is nothing more we can do for you here, as it is such an old model and support of that product by Nokia / Nokia Care points / phone repair shops is most likely not going to happen.

  • Trouble loading Mac driver for Display Adapter (connecting Mac to flat screen TV)

    Howdy:
    I'm trying to connect my Mac (OSX 5) to a flat screen TV.  To do so I just bought a USB 2.0 to HDMI® Display Adapter w/ Audio (1920 x 1080). The mini CD containing the DisplayLink software drivers that came with the unit won't fit in my Mac CD drive. I then tried to download the correct driver from the DisplayLink website, "DisplayLink USB Graphics Macintosh Driver" which appears to be appropriate for OSX 5 (at http://www.displaylink.com/support/mac_downloads.php). This proceeds through the installation steps, then bombs out with the error message that "The following install step failed: run preinstall script for DisplayLink software. Contact the software manufacturer for assistance."
    In the hopes of finding a compatible driver, I looked for an earlier version of the driver on the DisplayLink site, but couldn't find one.
    Help!

    Your 20" 2007 iMac has a mini-dvi video out.  Forget about using usb and installing drivers and just use a mini-dvi to HDMI adapter and an HDMI cable instead.
    Mini-DVI to HDMI Adapter
    Then connect your audio line out (headphone) to your TV's audio in and you should be set to go.

  • Mac driver for HP Lasejet 6L model C3990 A

    i have a laserjet printer HP Model C3990 A, very old model indeed.Bought recently i macbook air and cannot print on my old printer. Tried to donwload thw drivers online but cannot find the drivers for OSX 
    Can anybody tell me is this printer is obsolete for My mac, if i have to buy a new one? or does anybody know the link to downloading the drivers of this pritner to a mac?
    thanks!

    Hi,
    I afraid the printer is not supported on Mac OS X 10.9 and and there are no driver options available for Mavericks as you may find listed below:
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=2...
    You might have lack using a 3rd party driver such as HPIJS, which seems to support the printer.
    Although it do not list 10.9 I can confirm it do work with the latest OS as well.
    Be sure to download and install any of the 3 required downloads:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
    Next be sure to connect the printer and ensure it is powered on and ready.
    Clcik the Apple icon and select Printers & Scanners.
    Click the Plus sign and check the listed printer.
    Clcik the Use drop-down and then click on Select Printer Software and locate the HP LaserJet 6l hpijs, 3.10.6.15 driver.
    Confirm the steps to add the printer and try printing using the newly created print queue.
    Hope that may do the trick,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Nokia Connectivity cable driver for Nokia 6730 cla...

    I tried to install Nokia PC Suite for my Nokia 6730, but without success, because the system says: "The older version of Nokia Connectivity Cable Driver cannot be removed."
    What can I do ?
    Solved!
    Go to Solution.

    ceriana2 wrote:
    Thank you for your proposals. But they did'nt help. I did all the proposed steps, but the message again is: The older version of Nokia connectivity Cable Driver cannot be removed.
    Do you have another idea ?
    Are you logged in as admininstrator? Use Revo to uninstall all Nokia related software including drivers and start again.
    http://www.revouninstaller.com/revo_uninstaller_free_download.html
    Message Edited by hadimassa on 01-Feb-2010 05:29 PM
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • Need help getting Mac driver for HP PSC 1510 that works on XP networked printer

    My goal is to use a Mac OS X 10.5 laptop and use a Windows XP networked printer - an HP PSC 1510. So far I have failed.
    I downloaded a driver update 1.1.1 from Mac which has version 4.03 of the HP PSC 1500 series family of drivers. However, the documentation states that it is not one that will work with an IP or XP connected printer. The earlier driver that came with Mac OS X 10.5 documentation also says that it will not work with an IP or XP connected printer. This explained why the Mac versions of the HP software applications could not see my printer. I had also tried using the default Postscript generic option presented when I was setting up the network printer on the Mac. My one graphic page printed as ten or twelve text pages of nonsense characters so that was also a failure.
    So I have my shared HP PSC 1510 wired (connected) off my Windows XP desktop and shared on my home network. I really want to be able to print to the HP PSC 1510 from my wireless Mac laptop especially now that I am partially disabled and getting up and to the PC printer is painful.
    If anyone knows how to make this work properly, or even an acceptable workaround, I would be ever so grateful.

    Hey , Welcome to the HP Support Forums!
    I understand that you're looking for a driver that would allow your HP PSC 750 All-in-One Printer to function for printing and scanning on your Mac OS X 10.10 Computer. I would like to assist you with this today. I am happy to report that the HP printing and scanning driver is offered for your specific model of PSC printer for the newer Mac Operating Systems. Please click here to download the basic print and scan driver. According the the driver page (found here) this driver offers basic scan and print capabilities for Mac OS X 9.1 to Mac OS X 9.2.2, and Mac OS X 10.1.x to Mac OS X 10.2.4 and higher.  Once the driver is downloaded please follow the onscreen prompts to complete the installation. Once the installation has completed successfully please test printing and scanning to confirm that your product is functioning as per normal.  Please respond to this post with the result of your installation. I look forward to hearing from you. Best of luck!  

  • Mac address for nokia 6700?

    i have been using the *#62209526# on smart phones to recll the mac address but it does not work on the 6700??? any one have any ideas??
    also if anyone knows how to do it on old phones ie n90 and other phones pre s60 please let me know
    thx
    j

    @jez888
    6700 Classic S40 device no WLAN, but for 6700 Slide S60 3rd FP2 *#62209526# while the phone is on the home screen should work.
    Happy to have helped forum with a Support Ratio = 42.5

Maybe you are looking for

  • My payment has been declined.

    Hi, I made a purchse for an iPad Mini on November 3rd, 2012 and everything was great, I had no issues with my Debit/Visa Card at the time of purchase. But then a week or so after I went to check my status of my order and it said this: "Payment action

  • Routines

    Hi All, We have two external system that we want to extract data from. We are using UDconnect for the new system and will use flat files for the old system. Problem is product code defined in both systems are different. We want to define the products

  • Is it possible to hide selected bookmarks in bookmark pane?

    We want our application to launch a PDF opened to a certain bookmark. However, that bookmark will be a numeric ID, so we don't want it to be displayed in the bookmark pane. We DO want the bookmark pane to display our standard table of contents. So, i

  • VI Name Property Restrictio​ns

    I am using an 8421 serial card, so to write or read on Port 1 you need a Visa Write with the "Visa Resource Name" "ASRL11::INSTR". I call the Serial Daemon template and then rename it to the instance and it throws an error "Error 1 occurred at Proper

  • Serial records:Lot/Serial validation failed.  Please check log for details

    Hi, Received error while performing Quantity On Hand Conversion at MTL_TRANSACTIONS_INTERFACE table, "Serial records:Lot/Serial validation failed. Please check log for details." Perfomred following steps, 1) Inserted data at MTL_TRANSACTIONS_INETRFAC