Mac driver for Nokia CA-42 data cable

I bought the Nokia CA-42 data cable w/o realizing that it only supported PC operating systems. I want to sync my Nokia 6820 phone w/iSync 2.2, but I'am currently stalled. Has a driver for the Mac been created?
help needed here!
eMac   Mac OS X (10.4.6)  

I bought a CA-42 cable for my Nokia 3220. I have Virtual PC v.6.1.0 and Windows XP Pro installed on my eMac. I have enough RAM to handle running VPC/WinXP and Mac OS X at the same time (768 MB). Can I use the cable to connect my phone to my Mac, but while running VPC and WinXP? The phone SHOULD think it's connected to a PC shouldn't it?
I want to use the Nokia PC Suite to manage my phone, but also to back it up, as I want to have it flashed, and need to save everything, first.
I haven't been successful, so far, and would like to know if using Windows on VPC can be done, what settings I need to adjust, or if you have to actually have a PC (which would be a real downer [G]). This would be so much simpler if Nokia would just come out with a Mac version of their suite.Thanks.
eMac   Mac OS X (10.3.9)  

Similar Messages

  • Mac Driver for Nokia 6255

    Well, with a NO PC card slot on my new MacBook, I was wondering how do I connect to the net using my Nokia 6255(CDMA conenction) via the the Nokia DKU-2 USB cable. Where can I get the drivers for this & how do I go about it

    From what I see there is no Mac Driver for this phone and usb cable yet:
    http://www.europe.nokia.com/nokia/0,8764,81914,00.html.
    It is only provided driver for windows. And if you have xp installed from boot camp in your MacBook, you could use that driver on XP side.
    That phone is not sold in us market yet as stated on nokia site:
    The Nokia 6255 phone has not been authorized as required by the rules of the Federal Communications Commission ("FCC"). This device may not be sold or leased or offered for sale or lease, until FCC authorization is obtained.
    so that could be why there is no driver for Mac yet.

  • Nokia 8800 / 8801 Data Cable or Car Kit - Anyone H...

    Does anyone know how or where to get any of these. I do recall that Nokia made a data cable for the 8800 but cannot find one.Instead I bought a cable from eBay which fits into the back of the handset but this does not work.
    Nokia E71 RM-346
    400.21.013

    The 8801 is the same as the Nokia 8800.
    However the 8801 is designed for the US market, because it has a different radio module in it.
    It is Quad Band, but instead of working on GSM900 it operates on GSM850. Because there are no GSM850 Networks in the UK then that handset will only work on GSM 1800 or GSM 1900 Networks. GSM 1800 Networks are available in the UK those are T-Mobile and Orange - in dense areas of population you may get some Voda or O2 but not nationally. Vodafone and O2 use GSM 900 Networks and as such the 8801 will not pick them up.
    As the handset is the same as the 8800 there is no data cable connection, and again the only way to connect it is by Bluetooth.
    I'm guessing that you did not get the phone in the UK?
    Shunts...
    I will mostly be communicating with a Nokia E72 Zodium Black
    Nokia E72-1 with Vr 051.018.207.04 Software
    If this post helped... Add some kudos!!

  • Connectivity of Nokia 6020 Via Data cable

    I'm having a teething problem to connect my handset Nokia 6020 via data cable.I can't get a right cable.can anyone assist me on this?
    Regards
    ken

    Hi roki
    I think you need a CA-42 cable. All drivers can be found:
    http://www.nokia.co.uk/A4144937
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Need mac driver for TP-Link Wireless USB adapter TL-WN7200ND

    i need Mac driver for TP-Link Wireless USB adapter model no TL-WN7200ND

    First of all, TP-Link does not provide OS X drivers for that adapter. However, there are other sources that have drivers like this one. It is not official and it may fail, but it has been tested by other users and it works correctly.

  • I am looking for a Mac driver for a Muratec MFX 1430 printer/fax/copier.  Is there one out there for a Mac?

    Looking for a Mac driver for a Muratec MFX-1430 printer/fax/copier
    is there such an animal out there?

    http://www.muratec.com/new/support/drivers.asp does not appear to support that model at all on the Mac.
    Some open source drivers* may exist to support it.
    * Links to my pages may give me compensation.

  • Problem With Nokia 6300 USB DATA CABLE OPTION Not ...

    Hi, I have a Nokia 6300 v.5.00. My problem is when
    I connect my phone using a mini usb cable to the pc, USB Data Cable option on my phone is not highlighted, so I can't use the pc suite mode functions etc. I tried 3 different computers with Windows XP SP3 and 3 different good quality mini usb cables but still to no avail. The options like data mode, nokia pc suite mode still doesn't seem to appear. I also tried different USB slots in these 3 computers still no luck. Can anybody tell me what's the problem? Is there something wrong with IC on my phone or something? What drivers do I need? This is my first time using the mini pop port on THIS phone, I've been using bluetooth to transfer files but it's so slow. Please help

    Hey guys there is a solution with you problem and it works fine for me now. After all the comments & suggestions i read i finally got the best solution for all of you. This can be very simple. Try to install the Nokia PC Suite v7.0.2
    in your pc after that try to search & find the Nokia USB connectivity cable driver v6.8.2 in the web if u get it. Then uninstall the usb connectivity cable driver v7.0.2 in the CONTROL PANEL ADD/REMOVE after that install the "usb connectivity cable driver v6.8.2 in ur PC then try to plug in your Nokia 6300 it will install automatically ur phone. PRESTO your unit can be now Recognized of your PC.
    THAT's ALL FOLKS!!!

  • Nokia E63:no data cable.

    I purchased nokia e63 on the first day of the launch. When i came home and opened the box i was disappointed, Nokia is selling a business class phone without a connectivity cable that's really unacceptable. I spent 1,200/- more on the cable. I purchased it from a nokia priority dealer but a got the cable without any box. How can i verify the cable i purchased is original? If Nokia give the cable in box then it will obviously be original and i wouldn't mind paying couple of thousands extra. It was really unacceptable. I am using a lot of nokia phones like Nokia N95 , Nokia N73 , Nokia 1650 but if i get this kind of disappointment from nokia then i have to go for some other brands.

    i was to choose between e51 & e63...& e51 had a data cable included in the box while e63 didn't...thats what i came to know from the website...
    after visiting the nokia priority shop...i got a confirmation to this...
    then i visited another nokia shop, they said that red e63 has a data cable included blue one doesn't...thats coz blue one is more preferred by people...
    i went to another shop to buy e63...they said that in new stock even blue ones have data cable included in the box...
    unfortunately blue ones are out of stock...
    i bought a red one, it came with a data cable... 
    regards,
    anupam149
    regards,
    anupam149

  • X64 Driver for Nokia DKU-5

    Hello, Can anyone tell me if there is a downloadable driver for x64 Edition for DKU-5. I mean how can I connect my phone with my PC? As soon as I plug-in the cable, the driver do not instal. Please help.

    Nokia's support pages only have drivers for "Windows 98SE/ME/2000/XP", and I suspect nobody else has written any 64-bit WinXP drivers for that cable.

  • Nokia n81 8gb data cable

    When i can buy data cable for nokia n81 8gb ???
    I live in Russia\Moscow
    Message Edited by fiter92 on 15-Mar-2008 07:41 PM

    15-Mar-2008 07:41 PM
    fiter92 wrote:
    When i can buy data cable for nokia n81 8gb ???
    I live in Russia\Moscow
    Message Edited by fiter92 on 15-Mar-2008 07:41 PM
    At Nokia shops or through internet
    If my post has helped you please click the white star on the right

  • Nokia 6170 usb data cable

    I tried to getr the software for my phone to use the usb data cable and the link on your web site is bad. please help.
    Thank you,
    brandiMessage Edited by karim on 03-Feb-2006
    07:09 PM

    The package just says data cable and the software is on this website under this link http://europe.nokia.com/nokia/0,8764,4225,00.html
    I need it to explore my phone and the link is unkown to the server.

  • Mac driver for OS 10.6.8

    I just purchased HP Envy 7640 printer, and there are no drivers listed for MAC OS 10.6.8.I can  not upgrade the OS, as sever critical programs will not run on Mac OS 10.10. what recourse do I have?

    Hi,
    I afraid you will have to upgrade the OS for the printer to fully work ir get an older model which is compatible with Snow Leopard, the printer is only supported on Lion or newer OS versions as you may find listed below (Under the System Requirements section):
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04353671&cc=us&dlc=en&lc=en&product=6617269&tas...
    As a workaround you may use an alternative driver, but that will only allow printing from the Mac.
    For that download and install the following package:
    http://support.apple.com/kb/DL1770?viewlocale=en_US&locale=en_US
    Next connect the pritner to the Mac or to the same network.
    Open System Preferences > Print & Fax and click the plus sign.
    select the listed 7640 printer and click the Print Using drop down and then on Select Printer Software.
    Select the HP ENVY 5530 from the list and add the printer, that should allow printing to the 7640 printer.
    Basic scanning can be done via the EWS interface by opening the Scan tab, that only applicable for a network connection and only provide basic scan options.
    It can be reached by typing the printer IP address into Safari.
    Hope that may help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Nokia Lumia 520 data cable removing

    I bought Lumia 520 last week. Haven't installed windows 8 software with my windows 7 laptop yet. but i did connect  using the data cable to transfer some music. After i was done transferring data i found no safely remove hardware option.  So i had to just remove it. But is it ok to just remove the cable from the laptop. I havn't connected the phone to laptop ever since then. How can i get the safely remove hardware option? Also it was shown under portable devices as Windows Phone.

    Eirish88 wrote:
    is it ok to just remove the cable from the laptop.
    Yes, that is standard behaviour of Windows 7. Somewhere, you can switch to the old mode which is faster but more insecure, and therefore gives you this icon back. I do not know, where that option was. Do you really need that? Then I search for you.

  • Mac Driver for the HP C3180

    Where can I get the Hp C3180 newer driver? Can you tell me the exact web site?
    Thank you

    Hi PanchoLopez
    This is the newest one i can find.
    Print Driver for HP Photosmart C3100/C4100 series - Mac OS X v10.3 and v10.4
    You could also click on Notify me when new software is available, as HP may have something for you, not yet listed on their site.
    If this solves your question, please consider awarding stars, by checking the helpful or solved button above on the post. This is not a requirement, merely an expression of thanks.
    regards roam

  • I HAVE AN ORTEK 810 USB KEYBOARD.  WHERE CAN I FIND A MAC DRIVER FOR IT? THANKS

    I havean ortek mck810 sub. are there MAC drivers for the keyboard?? thanks

    yes-I checked for you and yes, there's a driver. and yes, my experience has been that you can plug pretty much any usb keyboard into your Mac and it should work, at least the basic functions will work fine. Tried it out with a keyboard I found in the dumpster near my condo, and it worked, so there's that, anyways
    there you go
    John B

Maybe you are looking for

  • SYSDATE is not getting incremented in the parameter - Scheduler

    Hi All I have used the query 'SELECT SYSDATE FROM DUAL' for a parameter in concurrent request. If I execute this concurrent as a single request, then it returns exact sysdate (current date) in a parameter. If i schedule this program for daily executi

  • Something using my internet usage ????

    Hi all, this may be a strange one, but i have contacted my operater and they were no help, so i thought i would let you guys give it a bash For some reason, something on my BBcurve is eating into my bandwidth every night at 00:00.01 So 1 second past

  • Dynamic Variable name (for int/long) from a String variable

    Hi, I want to give a int/long variable name from a String. for ex. String str = lookup + "Id"; lookup is a String variable coming from XML. Now, for instance lookup="name". So str = "nameId". Now I want to create a int/long variable by nameId. Could

  • How to go back from 10.4.5 - 10.4.2?

    Upgrading to 10.4.5 broke a scientific application I rely on. How can one go back to an earlier version of OS X? That's not something I've ever tried to do. I have a full backup, but not that far back.

  • Bridge goes nuts if a PDF is in the directory it is trying to display

    I'm running the latest updates of PS CS3 and Bridge CS3 on a MacBook with the latest rev of Tiger, and the latest update of Adobe Reader. If I aim Bridge at a directory that contains a PDF file, both CPU's max out and the temperature jumps 20 C. I ha