Mac Driver for the HP C3180

Where can I get the Hp C3180 newer driver? Can you tell me the exact web site?
Thank you

Hi PanchoLopez
This is the newest one i can find.
Print Driver for HP Photosmart C3100/C4100 series - Mac OS X v10.3 and v10.4
You could also click on Notify me when new software is available, as HP may have something for you, not yet listed on their site.
If this solves your question, please consider awarding stars, by checking the helpful or solved button above on the post. This is not a requirement, merely an expression of thanks.
regards roam

Similar Messages

  • I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

    In the Mac side of things, backups usually come in two flavors: clones or incrementals.
    A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
    Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
    As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
    Holler if you need specifics on how to do each. This was just an executive summary.

  • What is the best external hard drive for the MAC Book Pro with Retina?

    What is the best external hard drive for the MAC Book Pro with Retina?
    I was looking at WD MY PASSPORT FOR MAC and Toshiba. I want something that will work best with time capsule! Suggestions on the best external hard drive would be greatly appreciated!!!

    A Time Machine backup drive should be substantially larger than the system drive.  If you have a 128 or 256 GB SSD then a 1 TB drive will suffice.  If you have a 512 GB SSD then a 2 TB drive will suffice.  As leroydouglas indicated any brand other than WD will do.
    For 1 TB drives PlotinusVeritas gives some great suggestions here:
    https://discussions.apple.com/thread/5602141?tstart=0
    A 2 TB drive sold by Apple:
    http://store.apple.com/us/product/H9378ZM/A/lacie-2tb-usb-30-porsche-design-p923 3-desktop-hard-drive
    $130
    A 2 TB drive just as good for only $92.
    http://www.ebay.com/itm/Toshiba-Canvio-Basics-3-0-USB-2-TB-Portable-Hard-Drive-M odel-HDTB220XK3CA-/231162655273

  • Where can I find a Mac printer driver for the HP LaserJet 1536

    Where can I find a Mac printer driver for the HP Laser Jet 1536dnf MFP

    Hello, Mario here. All drivers available for this printer are located here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3974279&lc=en&cc=us& dlc=en&lang=en&cc=us
    Select your operating system and you will be able to see what drivers are available. Let me know if you have any other questions.
    I work on behalf of HP

  • Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

    This is an Altec Lansing IMT227 OrbitM etc
    Is this what you have?
    Here is the specification, please note, no USB
    You are either mistaken or talking about a different model.

  • I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well?

    I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
    I need some recomendations plz.

    Hello,
    you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
    Cheers!

  • What's he best portable hard drive for the Mac Pro?

    What's the best portable hard drive for the MacBook Pro?

    There is no best.
    Look at OWC for some options.  http://www.macsales.com/
    I am biased against the ubiquitous  low price Western Digital.
    I had good luck with DiskGo Edge in the past.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • What happened to the printer driver for the HP Laserjet 1020?

    After installing HP Printer Driver Update v1.1.1 for Mac OS X 10.5.3 my HP Laserjet 1020 no longer works. When I sent a print command from any software it seemed to work properly, but nothing printed. The information in printer utility window indicated that the printer was ready and there were no items in the queue.
    I removed the printer and attempted to reinstall with the updated driver. However, there is no driver for the 1020 in the driver selection menu, despite the fact that it is listed as one of the drivers included in the update.
    Can anyone suggest where I can obtain the appropriate driver?

    greg sahli: I followed your suggestion to reset the printing system and re-install the driver update. While there is indeed a Receipt for the 1022 Series pkg, the driver does not appear in the drop down menu. The drivers closest to the 1020 that appear are 1010, 1012, 1015, and 1100. None of these drivers work.
    I did find an 80% solution at Macosxhints. I will make do with this until the new OS X system comes out. If it has the 1020 or 1022 driver that works with my printer I would probably buy it. However, if it does not and the fix from Macosxhints doesn't work with Snow Leopard I'll be hard pressed to justify an upgrade until my printer dies.
    Anyone interested can find it at the following url, if it is still active (there are no spaces in the url):
    http://forums.macosxhints.com/showthread.php?s=eb4fe0d44e9dcd41a8da863618e391ac& t=40933&page=10

  • How to Extend C: Drive On PC or/and use Mac drive from the PC

    I Install Boot camp on Mac book pro
    the Limit for Drive C: is only 32 GB,can i extend it ?
    From the mac i can see and use the PC C: Drive but i cant See and use the Mac drive from the PC,
    Do you know any way to see and use it ?
    Thanks,
    Yariv

    You weren't limited to 32GB unless you chose to do so.
    HFSExplorer can read HFS+
    MacDrive7 can read and write
    Personally would not use FAT and just stick with NTFS.
    Paragon Software has 3 products. To write to NTFS from OS X. To resize partition. Backup software for Windows.

  • How can I get a printer driver for the hp psc 2410 photosmart?

    When I tried toadd the printer, there was a message saying that the printer driver for the 2400 series was available, but when I tried to download it, I received an error message saying that I couldn't download it because of a network error.  My Macbook is not on a network at the moment.  How can I get the driver so I can print?

    You can also install this update directly (not through app store):
    http://support.apple.com/kb/dl907
    If you want us to help more, you will need to give us more detailed info. "It didn't work" leaves me wondering exactly what you've done so far.
    For example, after clicking Add/+ and selecting the printer you want, have you waited for a full minute for the Mac to find the driver
    - OR -
    when it starts searching for driver, have you tried going to the pull-down menu where it says "Use: Auto-select," and choosing "Select Printer Software..." to make a manual selection?

  • I need a print driver for the HP Color LaserJet 3600 for OS X 10.8.3

    Now that I have updated to the newest OS I'm frustrated because neither Hewlett Packard nor Apple has a driver for the printers that I have.  So I can't print from my laptop to any of my printers.  I just need a driver option for and HP Color LaserJet 3600, Canon MF5900 Series, and a Hewlett Packard CP1518. 

    Information/possible solution:
    Printer Setup
    https://discussions.apple.com/message/4367330#4367330
    HPIJS for Mac OS X
    Gimp - Print

  • I HAVE AN ORTEK 810 USB KEYBOARD.  WHERE CAN I FIND A MAC DRIVER FOR IT? THANKS

    I havean ortek mck810 sub. are there MAC drivers for the keyboard?? thanks

    yes-I checked for you and yes, there's a driver. and yes, my experience has been that you can plug pretty much any usb keyboard into your Mac and it should work, at least the basic functions will work fine. Tried it out with a keyboard I found in the dumpster near my condo, and it worked, so there's that, anyways
    there you go
    John B

  • Installing a driver for the Apple Keyboard in Boot camp windows

    I recently installed Boot Camp, VMware and Vista on my Mac so that I could move all of my computing on to one computer (I use a few programs that aren't available for the iMac). In Windows I cannot use the number pad for input - I can only use the numbers just above the letters. This is a major inconvenience because I input numbers often. I have tried to search for the driver for the Apple Keyboard that is compatible with windows, but have been unsuccessful.
    Anyone know of a fix for this?
    Thanks!

    I tried putting in the Leopard disk and running setup.exe and that went through the motions of installing all of the drivers, but after I restarted the windows machine it still doesn't recognize my keyboard. This may be a system wide issue, because when I work in Windows it also tells me that I do not have a camera installed for video chat. At first I thought this was just part of the price I had to pay to have a Mac and use windows on it, but now I'm thinking that my drivers were not installed properly because I know a camera is installed internally (obviously - its a less than one year old iMac all-in-one).
    Can anyone think of something that I'm not doing? I have gone into the control panel in the Windows machine and tried to update my driver, but it keeps telling me that the driver is correct (it has windows driver for a standard ps/2 keyboard).

  • In my macbookpro airport showing as uninstalled.  How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

    In my macbookpro airport showing as uninstalled.  How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

    jeanfromisle-arné wrote:
    I'm new to MacBook Pro.
    My system is Mac OS X v.10.6.8.
    I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
    Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
    Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
    Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
    where do I find the exact version (in french)
    For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

Maybe you are looking for

  • DPL and composite pattern

    Hello...using DPL, JE (3.1.0), and trying to come up with a design that fits the following mold: @Entity public class Thing {    @PrimaryKey    long id;    @SecondaryKey(relate=MANY_TO_ONE)    int thingTypeId;    // how to link this to thing attribut

  • How can I delete local schedule tasks, if they do not show up in the left ARD pain

    In ARD you can schedule task on the local machine. Usually you can see the scheduled task in the left pain of the main window. I deleated some schedules tasks, but the tasks continue excute every morning. Is the a way to find these invisable schedule

  • Ipod will no longer connect-nothing happens.Can't transfer new iTunes purch

    I did the iTunes update some time ago to the latest version 7.0.2 I have had no trouble using my 5th gen ipod until today. I connect as I always have to transfer my latest iTunes purchases to my ipod and nothing happens. I tried resetting the ipod an

  • [svn] 4321: Fixing name of strokes directory in the directory skeleton for fxgutils.

    Revision: 4321 Author: [email protected] Date: 2008-12-15 18:22:07 -0800 (Mon, 15 Dec 2008) Log Message: Fixing name of strokes directory in the directory skeleton for fxgutils. QE: No Doc: No Added Paths: flex/sdk/trunk/modules/fxgutils/src/java/fla

  • Missing color profiles

    When I view images in Bridge it shows that I have either sRGB or Adobe 1998 color profiles embedded with images. When I try to open them in CS2 I get the dialog box stating they have no embedded profile??? I'm talking about jpeg files in Bridge. I ha