Mac Excel 2008 error bars
I am trying to create custom error bars in an Excel graph but I am not having any luck. My IT person suggested updating my Excel 2008 but that did not do anything. I am relatively new to Macs so it could be my own lack of Mac experience. Please help!
Please post Office related question on Microsoft's own forums for their Mac software. Apple Discussions only provide support for Apple products:
http://www.officeformac.com/productforums
Similar Messages
-
Hello,
My Mac Pro 2008 has become very unstable. It reboots on shut down, briefly wakes from sleep repeatedly and has resently been displaying the error below on boot.
I've done a fresh install + removed everything thats not essential. Tried a PRAM and SMC reset.
Any help would be much appriciated!
ThanksSorry! Worlds slowest reply.
You were spot on and removing it worked a treat.
I've been having a lot of problems with permissions changing so no apparent reason. Have you heard of anything like that happening on fresh(ish) installs of Mavericks?
Things like ACL appearing on everything in my Applications folder!?
Thanks. -
Megastat compatibility with Mac excel 2008
anyone have any suggestions on how to download Megastat add-on onto macintosh microsoft excel program? Megastat works on windows based computer, but when I try to download to mac, I get the error message that "basic add-ons are not supported". Any advice???
ThanksHi and welcome to Discussions,
since Excel is not an Apple product, you might try the Excel for Mac Forum here http://www.officeformac.com/ProductForums/Excel/
Regards
Stefan -
I'm exploring Flex as a candidate to use for developing a web application that displays many graphs. The data displayed on the graphs are discreate values with associated stardar errors. I need to display the standard errors as an error bar - similar to how MS Excel displays error bars. Can anyone tell me if this can be done with Flex?
V,
Numbers does the best it can with the information you give it. If you ask for Error Bars, Numbers will calculate the standard deviation for the series and assign that calculation result to each of the bars in the series.
If each of your values represents some statistic that in itself is accompanied by a standard error, that's another thing, but Numbers doesn't know what the error values are unless you tell it. The way to tell Numbers what the error bar values should be in these special cases is to use Custom values.
Here's an example:
I like to use the Scatter Chart, but you will find similar controls for the bar chart.
Jerry -
Dear friends
I am using mac excel 2011 and made charts using multiple series of data. I have calculated mean, std dev and std error and wanted to pt in custom values for error bars. Everytime I choose error bars>more options> custom readings and then highlight
the cells on the chart. But the error bar still show the same value in all columns of that series.
I have even exported the sheet to my PC and tried on excel 2003 and it still is not allowing me to chose different values even in custom setting.
Please help
SHi Saurabh614,
Thanks for posting in MSDN forum.
This forum is for developers discusing developing issues invove Excel applicatin on Windows system. Since the issue is relative to Office for Mac, I suggest that you get more effective response from
Office for Mac forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?
Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps -
How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.
That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry -
Using Excel 2008 for a Mac on my laptop
Part of toolbar has disappeared (windows, help, view, etc) --- want to restore
Need to freeze column headings but freezing option was not working prior to disappearance of tool barHi Alveretta,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues on Windows platform. I suggest to get more effective response from
Office for mac forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or
learn from your interaction with us.
Thanks for your understanding.
Best regards
Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can crystal reports do Error bars like in excel charting?
Post Author: mecca
CA Forum: Charts and Graphs
Does anyone know if crystal repotrs xi can do error bars like in excel. I gave an example in my other post.Post Author: Dan3D
CA Forum: Charts and Graphs
If all else fails, this is easily solved with our CRChart replacement library (which does excellent error-bars).
-Dan @ 3D
DISCLAIMER: This product costs money. I work for the company that makes this product. -
HT1338 where can I find excel 2008 analysis toolpak for mac?
where can I find excel 2008 analysis toolpak for mac?
Did you check inside the Office folder in the Applications folder?
-
Mac : menu disapear on opening Excel 2008 files since update of PDF
Hello,
I've a problem with Excel 2008 since the last update of the PDF printer ...
All the menu, except the main menu of the software, disapear. I must go to the main menu, select the display I want, and chaecked again "menu" ... It's very disturbing.
May I wait for another update, or there does a solution ?
Thanks.
D. FraitureThanks. I'll check.
It's an iMac 10.6.8 -
So for my biology class i have to graph a great deal of statistic based ecology stuff. Doing these graphs is very easy, but since it is statistically based, I have to do "Y Error Bars" which means the actual Y value could be between the "Y Error Bar." Im pretty sure numbers doesn't have this feature, but I am hoping I just missed it, so if anyone could help, it would be great appreciated!
And, this is off subject, but in anyones opinion is iworks or is microsoft office 2008 for mac better. I thought iworks was great, but lately I'm having a lot of trouble, and I'm trying to decide if it would be work it to buy microsoft office 2008, anyways any help would be greatly appreciated, thank!
AaronDear LaCoste890:
To date, Numbers fails to provide a feature allowing one to insert custom error bars. This is a major failure.
As an Apple fan, I would love to move from Microsoft Office to iWork. However, to date, both Pages and Numbers are lightweight programs lacking sufficient functionality to use for scientific applications. As an academic physician/scientist, I am quite disappointed.
Pages fails due to its lack of integration with EndNote, which is, for me, a critical reference manager program. This is a shame, because I enjoy some of the excellent formating options that Pages offers.
Numbers fails due to its inability to use custom Y error bars, as you have noted. Scientific graphs lacking error bars are, of course, quite useless. Here the shame is that graphs generated on Numbers are much more attractive and just as easy to format. Also, Apple is really losing an opportunity, since MS Office '08 is really buggy on OS 10.5.
Scientists and students need to put serious pressure on Apple to fix these features. Otherwise, we will simply abandon the suite for MS Office, and no real innovation will take place. -
Hello everyone- Would anyone know how to create error bars in charts in Keynote 3? I can't seem to find an answer anywhere to this question. Many thanks to future replies...
Powerbook G4 Mac OS X (10.4.6)You can't get Keynote charts to generate error bars, or to use error bar information from some other source -- that functionality just isn't available in natively-produced Keynote charts.
However, charts that are copied from Excel and pasted into Keynote look quite good. You won't get all the cool textures, or 3D effects that you can with Keynote charts (and not having the latter is a good thing in my book). But, if you set the background of the chart to "None" from within Excel, the chart background will be transparent in Keynote, and you can do things like apply shadows that will conform to the chart elements. Any formatting that you do in Excel should be respected by Keynote. -
Error bars, error more.
I have updated to my Numbers after Mavericks update. Before that I can use my Numbers smoothly, but after an update, I found that some of my old files cannot open with the new version of Numbers. Furthermore, the error bars of the graph seem to have multiple problems. My program shuts down almost everytime I try to add error bars. And if it does not shut down, one or two bars diappear, e.g., when I added 6 error bars, only 5 showed up, skipping one bar in the middle, and the last error has never shown up. I guess it's the software problem and I hope that Apple will fix it soon. But if any of you know how to troubleshoot these problems, I greatly appreaciate.
Hi Saurabh614,
Thanks for posting in MSDN forum.
This forum is for developers discusing developing issues invove Excel applicatin on Windows system. Since the issue is relative to Office for Mac, I suggest that you get more effective response from
Office for Mac forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Mac Pro 2008 always crash after sleep and after first start
Hello, new in the forum,
2 years ago, I replaced the main disk of a Mac Pro 2008 for a SSD Samsung 470 256 Go.
Until then, it always crashed 1 or 5 minutes after sleep mode (which I didn't used much), and not always 10 to 15 minutes after the first start of the day.
No matter if I was working on it or not… Suitcase installed or not (no font problem here). Rest of the day was fine (if no sleep !).
The difference of speed was so big and "good" that I dealed with it. I though that the Mac Pro was a little old for the SSD technology, and that Apple would fix it, with chance…
2 weeks ago, I installed Maverick :
I got crashs during the work flow too. I needed to re-start 3 times at least… Re-start without extension was ok (or not), re-start, crash, re-start without extension, restart ok. I used Onyx, did PRAM too. And sometimes, I needed to re-install Maverick or even to do a clean-install !
So I suspected the Samsung 470 for all (sleep and work crashs) and replaced it for a Samsung 840 Pro 512 Go.
And the Mac Pro returned to Mountain Lion.
Not really better : no crash one day (yeeeees!) and crash after the first start the next day (nooooo!). Every time I tested sleep mode, it crashed.
My system :
Mac Pro 3.1 - 2,8 GHz - Quad
Mountain Lion, 10 Go ram DDR2, ATI Radeon HD 2600 XT, 30' cinema display.
Adobe CS5 alone (minimal install) with Onyx to repair after each crash.
Could it be the video card, the mother board, the age of the boy ?
Thanks a lot !
Christophe SEdit !
I said that Finder and apps were blocked after 10 seconds (without extension).
But it was to clic on Launchpad that blocked all, and 5 minutes later it works again.
I did clic again on Launchpad, it blocked and 2 minutes later it appeared full screen but with rainbow circle, and quit.
- Restarted with extensions. Kernel panic!
- Restarted the mac and the grey screen with Apple blocked, without any mouse this time. 15 minutes later, still blocked.
- Forced restart without extension. Here are the reports of Kernel Panic and EtreCheck:
Kernel Panic Report:
Interval Since Last Panic Report: 122463 sec
Panics Since Last Report: 1
Anonymous UUID: 52E60929-F5AE-D9CD-04B0-1872526C0821
Mon Oct 13 10:58:17 2014
panic(cpu 3 caller 0xffffff8007cb8945): Kernel trap at 0xffffff8007ef69e0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x000000000000008a, CR3: 0x000000002f749000, CR4: 0x0000000000000660
RAX: 0xffffff80209bb7e8, RBX: 0xffffff801fc6d808, RCX: 0x0000000009000000, RDX: 0xffffff801fc6dde0
RSP: 0xffffff8131b7bbc0, RBP: 0xffffff8131b7bc00, RSI: 0x00000000000c43ff, RDI: 0xffffff801fc6dde0
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff80220fbfa4, R11: 0x0000000000000020
R12: 0xffffff801fc6dde0, R13: 0x00000000000c43ff, R14: 0x00000000000c43ff, R15: 0x0000000000000002
RFL: 0x0000000000010202, RIP: 0xffffff8007ef69e0, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000008a, Error code: 0x0000000000000000, Fault CPU: 0x3
Backtrace (CPU 3), Frame : Return Address
0xffffff8131b7b860 : 0xffffff8007c1d636
0xffffff8131b7b8d0 : 0xffffff8007cb8945
0xffffff8131b7baa0 : 0xffffff8007ccebfd
0xffffff8131b7bac0 : 0xffffff8007ef69e0
0xffffff8131b7bc00 : 0xffffff8007eee0d6
0xffffff8131b7be00 : 0xffffff8007d1a5d6
0xffffff8131b7be60 : 0xffffff8007d092aa
0xffffff8131b7bf50 : 0xffffff8007fe97ba
0xffffff8131b7bfb0 : 0xffffff8007ccf453
BSD process name corresponding to current thread: mdworker
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide: 0x0000000007a00000
Kernel text base: 0xffffff8007c00000
System model name: MacPro3,1 (Mac-F42C88C8)
System uptime in nanoseconds: 121192507210
last loaded kext at 8889944220: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f899fe000, size 28672)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDAHardwareConfigDriver 2.4.7fc4
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.iokit.IOBluetoothSerialManager 4.1.7f4
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 2.4.7fc4
com.apple.driver.AppleUpstreamUserClient 3.5.12
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 8.1.6
com.apple.driver.AppleUSBDisplays 357
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.ATIRadeonX2000 8.1.6
com.apple.driver.ApplePolicyControl 3.4.5
com.apple.driver.AppleSMBusPCI 1.0.11d1
com.apple.driver.AppleLPC 1.6.3
com.apple.driver.AppleMCEDriver 1.1.9
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.CSRHIDTransitionDriver 4.1.7f4
com.apple.driver.PioneerSuperDrive 3.3.1
com.apple.iokit.SCSITaskUserClient 3.5.6
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.5
com.apple.driver.AppleUSBHub 635.4.0
com.apple.driver.AppleIntel8254XEthernet 3.1.1b1
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleFWOHCI 4.9.9
com.apple.driver.AppleAHCIPort 2.6.6
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 621.4.6
com.apple.driver.AppleUSBUHCI 621.4.0
com.apple.driver.AppleACPIButtons 1.8
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.8
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 214.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2.1
com.apple.driver.AppleIntelCPUPowerManagement 214.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.driver.DspFuncLib 2.4.7fc4
com.apple.iokit.IOAudioFamily 1.9.2fc7
com.apple.kext.OSvKernDSPLib 1.12
com.apple.driver.AppleSMBusController 1.0.11d1
com.apple.iokit.IOSurface 86.0.4
com.apple.iokit.IOBluetoothFamily 4.1.7f4
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.1.7f4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleHDAController 2.4.7fc4
com.apple.iokit.IOHDAFamily 2.4.7fc4
com.apple.driver.AppleGraphicsControl 3.4.5
com.apple.iokit.IONDRVSupport 2.3.7
com.apple.kext.AMD2600Controller 8.1.6
com.apple.kext.AMDSupport 8.1.6
com.apple.iokit.IOGraphicsFamily 2.3.7
com.apple.driver.AppleSMC 3.1.5d4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.4.1d13
com.apple.driver.AppleUSBHIDMouse 175.8
com.apple.driver.AppleHIDMouse 175.8
com.apple.driver.AppleUSBHIDKeyboard 170.2.4
com.apple.driver.AppleHIDKeyboard 170.2.4
com.apple.iokit.IOUSBHIDDriver 623.4.0
com.apple.driver.AppleUSBMergeNub 621.4.6
com.apple.driver.AppleUSBComposite 621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.6
com.apple.iokit.IOUSBUserClient 630.4.4
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOAHCIFamily 2.5.1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOUSBFamily 635.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 345
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.8
com.apple.iokit.IOPCIFamily 2.8
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 2600 XT, ATI Radeon HD 2600, PCIe, 256 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x02FE, 0x47523244463247425838454C3830304E3252
Bluetooth: Version 4.1.7f4 12974, 3 service, 12 devices, 0 incoming serial ports
PCI Card: ATI Radeon HD 2600, sppci_displaycontroller, Slot-1
Serial ATA Device: Samsung SSD 840 PRO Series, 512,11 GB
Serial ATA Device: ST31000524AS, 1 TB
Parallel ATA Device: PIONEER DVD-RW DVR-112D
USB Device: hub_device, apple_vendor_id, 0x9120, 0xfd500000 / 2
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd520000 / 4
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfd521000 / 6
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd522000 / 5
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x9220, 0xfd530000 / 3
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed
Report EtreCheck :
Description du problème :
Here is the report of EtreCheck after the Kerner Panic sent before.
Christophe.s
EtreCheck version : 2.0.2 (86)
Rapport créé 13 octobre 2014 11:23:31 UTC+02:00
Informations matérielles : ℹ️
Mac Pro (début 2008)
Mac Pro - modèle : MacPro3,1
2 2.8 GHz Quad-Core Intel Xeon CPU : 8-core
10 GB RAM Pas extensible
DIMM Riser B/DIMM 1
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 2
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 1
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 2
1 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser B/DIMM 3
empty empty empty empty
DIMM Riser B/DIMM 4
empty empty empty empty
DIMM Riser A/DIMM 3
2 GB DDR2 FB-DIMM 800 MHz ok
DIMM Riser A/DIMM 4
2 GB DDR2 FB-DIMM 800 MHz ok
Bluetooth: Vieux - Handoff/Airdrop2 pas disponible
Informations vidéos : ℹ️
ATI Radeon HD 2600 - VRAM : 256 MB
Cinema HD Display 2560 x 1600
Logiciel du système : ℹ️
OS X 10.8.5 (12F45) - Uptime: un jour 0:11:6
Informations des disques : ℹ️
Samsung SSD 840 PRO Series disk0 : (512,11 GB)
Statut S.M.A.R.T. : Vérifié
disk0s1 (disk0s1) <non monté> : 210 Mo
MacPro SSD (disk0s2) / [Startup] : 511.25 Go (472.61 Go libre)
Recovery HD (disk0s3) <non monté> [Restauration] : 650 Mo
ST31000524AS disk1 : (1 TB)
Statut S.M.A.R.T. : Vérifié
disk1s1 (disk1s1) <non monté> : 210 Mo
MacPro 1To (disk1s2) /Volumes/MacPro 1To : 999.35 Go (633.08 Go libre)
Recovery HD (disk1s3) <non monté> [Restauration] : 650 Mo
Informations USB : ℹ️
Verbatim Portable USB Drive 320,07 GB
Statut S.M.A.R.T. : Vérifié
disk3s1 (disk3s1) <non monté> : 210 Mo
320 Go Christophe Syren (disk3s2) /Volumes/320 Go Christophe Syren : 319.73 Go (313.64 Go libre)
USB 2.0 USB Flash Drive 8,17 GB
Statut S.M.A.R.T. : Vérifié
SANS TITRE (disk2s1) <non monté> : 8.17 Go
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Bluetooth USB Host Controller
Gatekeeper : ℹ️
Mac App Store et développeurs identifiés
Représentants de lancement : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.CS5ServiceManager.plist Aide
[désengagé] com.extensis.FMCore.plist Aide
Daemons de lancements : ℹ️
[invalid?] com.adobe.SwitchBoard.plist Aide
Représentants de lancement pour l’utilisateur : ℹ️
[désengagé] com.adobe.AAM.Updater-1.0.plist Aide
[désengagé] com.adobe.ARM.[...].plist Aide
Éléments Ouverture : ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Plug-ins internet : ℹ️
OfficeLiveBrowserPlugin : Version : 12.3.6 Aide
AdobePDFViewer : Version : 9.5.5 Aide
QuickTime Plugin : Version : 7.7.1
JavaAppletPlugin : Version : 14.9.0 - SDK 10.7 Vérifier la version
Panneaux de préférences de 3ème partie : ℹ️
Growl Aide
Time Machine : ℹ️
Skip System Files: NO
Sauvegarde automatique : OUI
Disques sauvegardés :
MacPro SSD : Taille de disque : 511.25 Go Disque utilisé : 38.64 Go
Destinations :
Data [Network]
Taille totale : 2 To
Nombre de sauvegardes total : 9
Sauvegardes la plus agée : 2014-10-08 01:39:21 +0000
Dernière sauvegarde : 2014-10-10 11:31:35 +0000
Taille de la disque de sauvegarde : Excellent
Taille de sauvegarde 2 To > (Taille de disque 511.25 Go X 3)
L’utilisation du CPU par processus : ℹ️
1% WindowServer
0% ps
0% fontd
0% System Events
0% coreservicesd
L’utilisation de la mémoire par processus : ℹ️
97 Mo Dock
97 Mo Finder
75 Mo WindowServer
64 Mo com.apple.security.pboxd
64 Mo CalendarAgent
Informations de la mémoire virtuelle : ℹ️
523 Mo RAM Disponible
1.04 Go RAM Active
307 Mo RAM Inactive
8.86 Go RAM Résidente
266 Mo Pages entrants
0 o Sorties pages
Maybe you are looking for
-
Connecting Crystal reports server 2008 to BI 7.0
Hello, I have a BI 7.0 server on Unix machine. I am trying to install crystal reports 2008 on windows 2003 server, and further integrate it to SAP BI by installing SAP integration kit. I have done the below. 1) Installed crystal reports server 2008
-
I recently purchased this machine second hand (private sale) It had a fresh install of 10.4.9 and everything seemed good for the first day or so. Then I started to get Kernel Panics. I have done all the usual stuff, except for the hardware disk check
-
Nokia 6700 Classic sensor settings
Hi. I have just recently bought the Nokia 6700, and was pretty impressed by the feature that allows you to view the clock, mute, reject calls etc by tapping the phone. However, I've been unable to get it to work. Any clues as to what could be wrong h
-
I want to create a GUI using labview to control a data acquisition card using a driver that was not created in labview. Could someone point me in the direction of some documentation that would give me some info on doing this. Thanks
-
IDSM-2 and VMS problem with version software
I use a IDSM-2 with software ver. 4... IDSM-2 is managing by VMS ver. 2.0. Since 2006 I couldn't taking new signature What can I do to upgrade IDSM to higher version ( IPS ver 5...) and which version VMS manage properly IDSM-2 with version software 5