Mac Flashpaper Printer Driver Missing

I have Macromedia Suite 8 with Contribute 3.11 but cannot
find the printer driver utility anywhere. It was supposed to be
installed with the programs on OSX 10.4.x
Anyone know where or how to find/install/link the printer
driver for Flashpaper.

You are wrong about this. Flashpaper is on the Mac and
requires Contribute 3. I had to reinstall Contribute to get my
Flashpaper Printer Driver to show up in the Printer list and get it
to work. It is more seamless on the Mac since you can print from
any program to Flashpaper. However, Flashpaper doesn't preserve
hyperlinks in all programs.

Similar Messages

  • Print driver missing

    My main printer is Epson Color Stylus 800. It wouldn't print color so I tried using an Epson CX6400 and loaded its software on my hard drive. I couldn't use either printer so I removed all CX6400 folder/files, reloaded my Stylus 800 software off the original CD and continue to get this message, "Can't find the SC800 printer driver. Reinstall print driver." I have done this several times and still get this message. Any ideas?
    Thanks,
    AT622

    Epson website shows a v1.16s was posted on 06/09/03:
    here

  • HP LaserJet P2015dn printer driver missing .To implement in network.

    Hi All,
    Recently i had format my SUSE linux PC which is Motherboard problem.
    My printer was connected in that PC only.
    After changing the Motherboard ,then  i connect the printer(HP LaserJet P2015dn ).i can able to access.but in our network nobody able to access.
    Then i searched last one week for driver for corresponding HP LaserJet P2015dn  printer.It was not fixing my problem.
    Eventhough i can't find my printer IP address.i heard that while putting driver software only, it will ask the new IP address.
    i gave new IP also but it not pinging .
    My question is:
    1.Please provide the link for driver(HP LaserJet P2015dn) and how to install.
    2.provide the steps to find the old IP address for this printer.
    Thanks in advance,
    Regards,
    Jp21

    Hi jp21,
    I hate to hear you are having issues.  Please Click Here for available software for this unit.  Due to the variety of Linux systems and supported printers for those types of systems, you may be redirected to other sites.   For this type of OS you may need to download an updated version of HPLIP or install it if missing.  Please Click Here to determine if you need to install or update HPLIP.  Please see the steps below to navigate previous software link and confirm the current IP address.  If you are not able to ping the printer's current IP address skip to the user guide link to troubleshoot networking issues. 
    From driver/software page:
    1. Click Linux
    2. Scroll down and click obtain software(under pink band)
    3. Click the link in middle of page labeled, 'Download Linux drivers from HP Linux Imaging and Printing Web site'
    4. Click hplip link(this will redirect you to the HPLIP download)
    5. Determine if HPLIP download/update is required from link above
    6. If required click download
    7. Answer initial installation questions
    8. Follow prompts to install HPLIP and printer
    Confirm IP address:
    1. From product control panel-print configuration page
    2. Press and hold Go button for 5 seconds
    3. Configuration page will print
    Please Click Here for the printer user guide.  It contains useful information for solving network issues. 
    Note: There are other printer setup tools for Linux systems such as CUPS or KDE wizard.  These are not affiliated with HP, however they may help resolve your issue.  HP and I are not responsible for any damage caused by the use of these tools.
    The following 3rd party website regarding cup filters may be useful however it is not affiliated with HP-HP and I are not responsible for any damage caused by the use of this website.
    Click Here
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • HT3669 Latest Mac OS Update Driver for Canon 9500 Pro causes text lines all to be printed over the first letter of the line?

    Anyone know how I can 'fix' the Mac OS printer driver for the Canon 9500 Pro - all my text lines end up with the whole line being printed over the first character of the line of text when printing PDFs. It has ruined a lot of work.

    I'd try this:
    Delete the current printer (reset the print system) Mac OS X: How to reset the printing system
    Delete all other Canon software and utilities from your computer.
    Do a factory reset on your printer
    Use Software Update to download the driver from Apple.
    Don't reinstall any other Canon Utilities.
    Make sure you don't have something mechanical stopping the paper from advancing.
    If the problem is really the driver, then you could look in Gutenprint for a different driver. Gutenprint for Mac OS X

  • Problem with contribute 3.11/flashpaper 2 printer driver

    I have problem with the contribute 3.11 and flashpaper 2
    printer driver. When I try to install it to my lab under domain
    enviroment, that mean multi user will use the same computer with
    differ user right. The problem is, when user with admin right log
    into the domain and left click on any file the first time,
    contribute install a new flahspaper driver, eg. macromedia
    flashpaper, macromedia flashpaper (copy 1), macromedia flashpaper
    (copy 2) etc...another problem is, when the user with domain user
    right login the computer, when they left click on any file the
    first time, contribute try to install the flashpaper printer driver
    for them, but since they are not allow to install any printer
    driver, the message," you do not have primission to install the
    printer driver etc" pop up and it only pop up once.
    Are there anyone have the same problem? Anyone know how to
    fix it? Thank you for the help in advance.
    Darksolo

    Hi,
    Please check with in your environmental variable whether JDK is 32 bit or shifted to 64 bit.
    It seems even though you have 64 bit still it is taking 32 bit only.
    Regards,
    Kal

  • Canon LBP6000 print driver - no printer appears in the 'add printer' section'  I have installed Mac CAPT Ve r340 and nothing shows.r

    I was having problems printing from my Canon LBP6000.  Print jobs remained held in the queue.  I uninstalled and reinstalled the Mac CAPT Ve r340 driver from Canon's website, no improvement.  The printer works fine with my Windows laptop.
    I found an option to remove all printers from the Print preferences section. I can't remember how I did this, but all printers were removed.  I reinstalled the above driver, but now in the 'print & scan' - 'add printer' section, I have no printer options.  And no idea how to get printer options.  So very open to advice.
    Thanks
    T.

    The ability to see the LBP6000 in the Add Printer view is not reliant on the printer driver but the USB cable. If you have the printers USB cable connected directly to the Mac, as opposed to having it connected to the Windows computer you mention or to some sort of USB hub, then it should appear in the Add Printer > Default view. If it does not show, then try another USB cable. You can also open System Information on the Mac and select the USB section in the left column. Then in the top right pane you will see all the USB busses on the Mac and the LBP should be seen under one of the busses if the USB cable is okay.
    With regards to the action to remove all printers, I would bet that you performed a reset of the printing system.

  • HP Laserjet 4 printer driver for mac osx 10.8.5

    Anybody know of a mac osx 10.8.5 printer driver for a HP Laserjet 4?

    Yeah, looked at this list earlier - they've got v. 19.8 for a Laserjet 4 Plus but mine is a plain Laserjet 4 so I doubt it would work. I used a Gutenprint driver v. 5.2.3 with Leopard that worked OK. Mountain Lion doesn't seem to like it as much...

  • Mac OS 10.5 Bonjour Unable to find printer driver for P1606dn connected via wired network.

    I have been trying to connect my HP Laserjet Pro P1606dn to my PowerMac G5 running Mac OS 10.5.8.  I connected the priner to my LAN via Ethernet cables and NetGear 8-port switch.  I then successfully installed the printer driver from the supplied CD on the Mac and went to System Preferences / Print & Fax to add the printer to the list of connected printers.  Hit the "+" button.  The HP P106dn was listed in the table (Kind = Bonjour).
    I selected this entry in the table, and the dialog box immediately went into action: the "Print Using" pullodwn listed the greyed out message "Please select a driver or printer model" and a spinning wheel labeled "Searching for new drivers" appeared below it.  The dialog box searches for but never finds the printer driver (I waited 20 minutes with no success).  I have installed other HP printers this way on this machine without any problem, e.g., HP Color Laserjet 2605dn.  Why is this method not working with this printer?
    I was able to connect this printer with other (Intel) Macs in my household via this LAN arrangement.  Is the printer driver for Intel-only Macs?
    I disconnecting the printer from the LAN and connected it directly to my Mac with a USB cable.  Followed the same process, and I was able to connect to this printer.  Successfully printed a document page.  While this provides me with a work-around for the G5 Mac, I need to share this printer with the other Macs in my household.
    I went to the HP download site and downloaded the latest driver for this printer, re-installed the printer driver on the Mac, and repeated the steps for the LAN arrangement (above) to complete the connection via the Print & Fax dialog.  The result was the same: spinning wheel searching for a printer driver that it cannot find.
    I do not know what else to do, or why this installation will not work.  I would appreciate it very much if anyone could offer an explanation for this or some suggestions as to what else can be done?
    Ed
    This question was solved.
    View Solution.

    I apologize for the delay in responding to you.  I was on the road all day yesterday.
    OK.  I switched the printer's Ethernet cable to a Linksys Switch (Model EZX S55W) that's part of this local network.  That did not work.  I swapped out the cable for one that I know works.  Still no change.  I switched the printer's Ethernet cable directly to a port on the router.  No change.  I even swapped cables here, too, but no success.
    As I was doing all this, I was wondering: When I select the HP P1606dn printer in the Print and Fax "Add" dialog box, (see the image below) and the Print Using pulldown menu displays "Please select a driver or printer model" and the message "Searching for new drivers" appears under it (with the spinning wheel), why is it that the Ethernet connection to printer is critical to "finding" a new (printer) driver?
    Isn't the utility searching through my system and libraries looking for a printer driver app for the printer that I identified/selected in the dialog box?  
    After all, if the dialog box lists the printer among those to choose from, hasn't the utility already discovered the printer via the Ethernet connection?

  • Can't add printer driver for Deskjet 1010 on Mac OS 10.9.5

    I have installed the printer driver on my Mac Mini running 10.7.5 with almost no issue (well, one of the first printouts actually crahsed Preview, but that was only once and might be another issue) and it print well and fast. But now I try to add this printer to my MB Pro running 10.9.5 and it always croaks that the software can't currently be loaded from the server (since 2 days now).
    I guess it means my Mac Mini which likely only has drivers for the oder OS X. I also tried to install the drivers directly (downloaded from Apple's support pages) but still to no avail. I always get that ghastly message.
    This question was solved.
    View Solution.

    I said (or meant) that I plugged the printer in the USB port of my MacBook. This made OSX to install the appropriate drvers. I think I also used the supplied CD with HP drivers to complete the installation. I'm pretty sure you can find the driver itself somewhere on a HP site for download. Sorry, but I have no idea where. I just remember searchng for drivers in the past. And most times it was a PITA :-(

  • Mac OS 8.6 Cursor Frozen after print driver install and restart.

    Installed Epson SC 980 Print driver on Mac OS 8.6.  After install, I was prompted to restart the computer.  Upon restart the window that contained the "Installer" button remains onscreen and the cursor is frozen.  Any help would be appreciated.  Thank you.

    Strange. Starting up with Extensions Off is supposed to prevent most extensions, including all 3rd-party software, and anything in the Startup Items folder from loading.
    Can you tell if it is an app itself which is running? Or is it a window for a disk image or something similar?
    You can also try resetting the PRAM while booting with Extension Off, just in case some non-valid instruction got set in PRAM (that should be a no-no for software, but mistakes do happen).
    To do that, restart or boot. Immediately press the Command-Option-P-R keys, keep them held down until you've heard a total of three sets of startup chimes. Then release those keys and hold down Shift, keeping it held down until the desktop appears. If you have control over the machine then, you can do some hunting for the Epson software that's causing the issue and get rid of it.
    Next level of user control to try is booting to a CD. If you have an OS Install CD, such as one for OS 8.6, which is valid for that machine, try booting the machine to the CD. This should render any software on the hard drive inert, and thus give you an opportunity to hunt the culprit down and remove it.

  • Where can I find a print driver for my e-mac running os9.2

    Where can I find a print driver for my e-mac running os9.2

    Actually the best place is the web site for the printer. You'll also need the model, but there are still some OS9 drivers out there.
    You must supply the printer make and model for people here to help further.

  • Printer Driver for PS CS5, Mac OS 10.8.5

    What printer driver do I need to print from Photoshop CS5 to an Epson Stylus Pro 7600 printer from a MAC Mini running OS 10.8.5?

    I have downloaded the latest Epson driver (Version 9.17) but the print box from PS CS5 does not allow changing from the letter size to any other size such as 24 inch roll auto cut which is the desired size.

  • I can't print from my mac to a cannon IR 4235 UFRII Print Driver

    How do i connnect to a canon IR 4235 UFRII print driver from my mac?

    What happens when you try to connect to it?

  • Missing Printer Driver... Please Reinstall

    So I got this error the other day.. that the Acrobat printer driver was missing and that I shou
    ld re-install Acrobat Pro 9.  That was an adventure.  After several days of trying to reinstall just Acrobat from my CS4 installation files, I finally removed all of CS4 ran the Adobe cleanup scripts, etc.  Re-installed CS4, got my updates, etc... and I get the same message whenever I try to create a PDF: PDFMaker cannot locate the Adobe PDF Printer's printer driver.  Please re-install Adobe Acrobat 9.1
    Clues, hints, suggestions?
    TIA

    ORBMike, I was on phone support the other day for 3 hours to fix this problem. They do not know why this is occuring. They did get my software working but it is still not in perfect working order. They had me download acrobat X. With their help we copied the drivers from X to 9. It was somewhat technical so I suggest calling adobe phone support. They were Great!!
    Jack Sherwood

  • Pdfmaker print driver is missing, I think I accidentally deleted it.

    I cannot create a pdf file from a Word document anymore, I get an error that says teh PDFmaker print driver is missing. I think I accidentally deleted it. What do I do? Can I get just this print driver and install it? Thanks.

    Hi Judy,
    Try closing all of your open applications.  Launch Acrobat and choose Help > Repair Acrobat Installation.
    Then try to create your PDF files again.
    Let us know how it goes.
    -David

Maybe you are looking for