Mac Flashplayer problem

I have MAC OSX 10.6.8 Snow Leopard...Safari...I have step-by-step uninstalled, installed, clean-installed SEVERAL times. *STILL* have "blocked plug-in". Obviously, I am NOT greatly technical! Can anyone help me?
Thank you...

Hi Pat. Thanks again for your response. Called the Geeks, and they tell me the reason I can't download Flashplayer is because my suspicions were correct; I have to upgrade from Snow Leopard to Snow Lion, then download will proceed smoothly. Thanks again. It's SO helpful that non-tecnhnical people like me can receive answers on forums like this...
annie... :-)

Similar Messages

Applet in Apple Mac OSX problem

Hi all,
have developing an applet long while using WinXP platform, everthing seem ok, but when i try over Apple Mac OSX, i has a loading problem saying that init failed to load ArrayList as error message said:
ArrayIndexOutOfBound, 0...
but when i debug print out the ArrayList content and its length, i'm sure that this ArrayList is NOT NULL and its length is NOT ZERO either. what is happening here? oh, ya, this only happen in Safari, in FireFox for Mac no problem, even Camino also pass the test, why? anyone have idea about this? because i'm new to Apple Mac.
also, there is another question whereby, when i use FireFox for Mac to load the applet, the applet load seem no problem but it just can't display properly. what i mean is that in Windows platform (IE6), this applet show entire applet successfully, but when i try it in Mac, it show only a part of applet without any error, but when i try to refresh the page, applet is now successfully show, why?
lastly, when a button of an applet being click and this will bring a new window with some parameters value, its work on IE in Windows platform, why it won't work for FireFox or Safari for Mac? i see prompt out saying is security problem, is there any workout of this? thanks. to summary out of junk above:
_______________________________FireFox_____Safari_____IE
_______________________________Win | Mac_____Mac____Win
1. load applet for 1st time___________OK_|_NO_____FAIL____OK
2. refresh applet after 1st load failed___OK_|_OK_____FAIL____OK
3. when applet button click (security)___OK_|_NO_____-_______OK
p/s: all above test was using same applet with same parameter and value.
below is the sample i capture from Apple Mac just now:
http://img.photobucket.com/albums/v660/ahbeng78/Apple_Mac.png
Message was edited by:
ahbeng78

i has a loading problem saying that
init failed to load ArrayList as error message
said:
ArrayIndexOutOfBound, 0...Well, post the stack trace.
but when i debug print out the ArrayList content and
its length, i'm sure that this ArrayList is NOT NULL
and its length is NOT ZERO either. You can still get an out of bounds exception with those conditions. The list could exist, its length could be N, but you're trying to dereference position N + 5, for example.
try it in Mac, it show only a part of applet without
any error, but when i try to refresh the page, applet
is now successfully show, why?My guess is that you're not calling repaint() when you should, but that's just a guess.
lastly, when a button of an applet being click and
this will bring a new window with some parameters
value, its work on IE in Windows platform, why it
won't work for FireFox or Safari for Mac? i see
prompt out saying is security problem, is there any
workout of this? thanks. to summary out of junk
above:Often you can sign applets so they can do things that unsigned applets aren't allowed to do.
Maybe you're making some kind of security mistake that Firefox and Safari are (properly) catching but IE isn't. In any event, post the error message.

I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
--JaySwanny

User Password Reset

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

I have a carillon 25 keyboard (bad choice, I know) and I can't get it to communicate with my mac at all! I'm running logic pro 9 and reason 5. I get signal in from my M Audio trigger finger so I know it isnt an entirely mac based problem. Thanks!!!

Well, how have to determined no signal is being recieved to your mac?
Have you got something that shows the actual signal? Or have you just been trying to control a VST? What software are you using by the way?
I personnally went with a AKAI MPK25, because it's made already mapped for logic & ableton etc, so it just makes things incredibly easy.
I would suggest you return it if you can as a dead unit & perhaps look at something else a bit easier?
Otherwise, if you just want to get this working we can have a look a bit deeper.
And driver? OS X driver?

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...????

I purchased Microsoft Office for Mac through the Apple website.. I have downloaded all from the disk into my Mac, no problem with all the other Word etc, but Outlook is asking for the key number: I have put it in but its obviously not the right one...???? In the box with the disk came the product key, have put it in and it doesnt work. Please help..x

unfortunately - you can not. you can't even buy outlook by itself at microsoft's own website.
does it have to be outlook? maybe you can get away with using something else that's outlook compatible.
how about trying Thunderbird for Mac OS?
or maybe you can call apple and let them know you purchase the wrong version - they might give you a break and just pay the difference for the home and business version.
good luck

Lightroom 5, Mac. Problem with the Radial Tool. Marquee Lines disappear.

Lightroom 5 Mac. Problem with the Radial Tool. I use this tool a lot. I must have hit a hot key by accident because between photos the marquee lines have disappeared and i don't know how to get them back. Without the marquee lines there I cannot rotate or expand the radial tool.

I have attempted to uninstall, empty trash and a fresh download from Adobe. The problem is still there...

.Mac sync problem

I can't sync my computer with my .Mac account. When I go to "System Preferences"->".Mac"->"Sync", the computer just sits there and I won't be able to go into the "Sync" option. I can't access the "Advanced" option in this window neither, however the "iDisk" and "Account" options are accessible.
I don't know if this related with my iSync problem reported also in this forum.
Thanks in advance.

Replying to myself as the one long discussion about recent .Mac sync problems has been locked!!
Just to say that NOW .Mac on the web says:
".Mac sync services are currently intermittently unavailable to some users. Changes made to synced information will be reflected when the problem is resolved. All other .Mac services are unaffected.
Last Updated: 6/1/06"
So the MANY people who have been posting problems in the last 24+ h MAY find it resolves and is not their end. But, customer care suggestion to apple:
- IF you think .Mac syncing has a problem POST the info IMMEDIATELY
- Possibly even email .Mac members as many use sync all the time without logging on the .Mac web services
The time and stress (cand cost) spent by many trying to fix their own syncing is frustrating. I have spent several hrs over the last 24h unregistering, registering, syncing manually, resetting from different Macs, doing it item by item...finding a glimmer of hope when on one occasion Mail synced and on another so did contacts, only for .Mac login failures to continue...This has clearly been replicated by a large number of other frustrated customers from the other postings on this over the last day.
macbook 2GHz, 1GB AM, 100GB Mac OS X (10.4.6)

Dreamweaver 2014.1 Build 6947 (Mac) - save problem

I updated to latest version yesterday and now have a problem when I save files which shouldn't happen on a 2012iMac saving to a thunderbolt drive - and didn't happen before updating.
When I save a file i get to watch the (very pretty but boring) spinning top for a longtime. If the 'Force Quit' window is open it shows Dreamweaver 'not responding'. Mostly but not always Dreamweaver decides to respond again.
Same site, same settings, same HDD as before the update.
IMac: 3.4GHz i7 32GB RAM
OS X: 10.9.5
What have you broke?

Hi Nancy,
It seems it's a bug, so I will go back to the previous vetsion. Thanks for
the link!
Best
Pedro
Em segunda-feira, 22 de dezembro de 2014, Nancy O. <[email protected]>
escreveu:
Dreamweaver 2014.1 Build 6947 (Mac) - save problem created by Nancy
O. <https://forums.adobe.com/people/Nancy+O.> in *Dreamweaver support
forum* - View the full discussion
<https://forums.adobe.com/message/7037522#7037522>

Older intel mac display problems (x1600)

My mom has an intel imac (the version before the black/aluminum kind) and it had very minor display issues with Tiger (very infrequent horizontal lines). They were all resolved with further point releases of Tiger.
After upgrading to Leopard she has had numerous problems, all revolving around frequent and numerous horizontal lines. They sometimes get so bad that the current window is almost completely obscured.
Here is a flickr set of images that show the problem and the display specs. I know that was happening to users with newer imacs and x1900s, is this happening to other x1600 users?
Any ideas on what is going on? I told her to call apple, but her warranty has run out and she feels uncomfortable calling because she is not a technical person (exactly why I told her to get a mac—I have egg on my face now). Should she downgrade? Can this be a hardware problem?

Hi everyone, i have bought an iMac 20 with a core 2 duo 1 GB ram and an ATI x1600 (a white one, because the screen quality is better than the new iMac 20 alu)
and i've some display problems. First i was on Tiger and i didn't noticed any problems but as leopard came out i rapidly upgraded to it and then came problems with the display.
To make short, the lower part of my screen is lagging anormaly. When i drag a window or even the dock's animations are slower. And it doesn't occur on the upper part of my screen, windows can be dragged smoothly, there is no lag even if the CPU is working at 100% (like on every normal mac...).
I've noticed there is a little bump when i'm dragging a windows from the top to the bottom of the screen, it's like the window enter another area.
I've of course checked a lot of boards on the www, so i've tried a lot of things, my card ATI X1600 128mo PCIe is fully working with core image and quartz extreme.
Some people said to wait that spotlight finished to index, but it's done and the problems are still there.
Time machine is off
I don't use coverflow and i've tried it, it doesn't change anything.
I've also re-installed Tiger and, wo-ow the problem is still there, especially when all is up to date.
It seems that, the problem come from the last firmware update, i don't know if this firmware update was done for improving compatibility with bootcamp or leopard but for me it has added this strange display behavior.
I've also tried to turn off quartz extreme, and it's even worst, worst on the lower part again but no changes on the upper, everything run smoothly.
As i didn't noticed it when i used my mac for the first days (on Tiger and without the firmware update) and on windows with bootcamp there is still no display problems at all, i keep thinking it's not an hardware problem but a software (firmware, display on Mac osX) problem.
It should be solved by a new firmware or Mac os upgrade until then i have to do with it.
By the way, does anyone knows if there's a way for downgrading the gpu firmware ? (when i try, it say that i didn't need it), it's the only thing that i havent tried.
Thanks in advance, and i beg your pardon for my pittyfull frenglish :s

Toast 6 Titanium 'Mac OS Problem error 50'

Hi,
After successfully burning a few DVDs I suddenly encountered the error 50 problem. After encoding for 5 hrs Toast 6 Titanium informs me that there is a Mac OS problem. This has happened twice on two different avi movies I was attempting to burn.

try the Toast support forum:
http://forums.support.roxio.com/index.php?s=332cefc898ea3d6054505ff2e93359a1&sho wforum=175

Usb vista to mac protocol problem

I'm running windows vista on a virtual machine( VirtualBox) mac snow leopard as a host. Also I'm running a program with chip FTDI
PRODUCT_NAME="FTDIChip CDM Drivers" FILE_VERSION="2.00.01.1 built by: WinDDK" ORIGINAL_FILENAME="ftserui2.dll" INTERNAL_NAME="ftserui2"
When I sync the program prompt an error 9 subscript out of range, it seems to me a problem with usb vista to mac protocol problem.
Any Ideas how to fix it?
Thank you,

Yes, I have the same problem and so does another person.
http://discussions.apple.com/thread.jspa?messageID=10939362

I'm one of the few idiots in the world who use the "Pages" App. Whenever I open an XLS file. "Numbers" quits - siting use of SFCompatability plugin. Reports to Mac. Problem remains constant?

I'm one of the few idiots in the world who use the "Pages" App. Whenever I open an XLS file. "Numbers" quits - siting use of SFCompatability plugin. Reports to Mac. Problem remains constant?

When you get the SF Compatibility plug in message something in the installed iWork part is corrupt. You ned to uninstall and install iWork again
You cannot completely delete iWork by moving the iWork '09 folder to the Trash. Instead, use Yvan Koenig's script:
          •          Go to http://www.box.com/s/00qnssoyeq2xvc22ra4k
          •          Choose public_YK > for_iWork'09 > other_iWork'09 items
          •          Click on uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button
Restart the computer and install from the iWork disc. Do the Software updates too.

Flash Player 10.1.102.64 for Mac have Problem

I am using Mac OS 10.6.5. And currently my flash player updated to 10.1.102.64.
After the update I got problem. The flash player can not display video streaming which have a cropped size.
for example, I stream a live video through FMS using normal video size for dimension 16:9 is 640 x 360 is have no problem.
But if I cropped the streaming size, for example into 640 x 352, then the video won't displayed. But it displayed without problem if using previous version (ie: standalone debuger Version 10.1.52.14 ) or using 10.1.102.64 in windows.
Please advise if someone else having the same problem.
--- updated
I tried change all my live video streaming using 640x360. The problem now become intermittent. Sometimes I can view the video, but sometimes also not displayed. At the same time, I tried using version 10.1.52.14, always can view the video without problem.

Hi Cija, pull it back out & mount the DMG & use the Installer, but first uninstall any previous version...
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/865/cpsid_86551.html#prob1=uninst,os=m10.6,
Download this if you haven't...
http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp10.1.102.6 4_and_9.0.289.0archive.zip
Once downloaded if it doesn't unzip automatically the double click on that file.
Look for the fp10.1.102.64_and_9.0.289.0archive folder, open it, look for the Flash Player 10.1.102.64 folder & open and look for 101r10264 folder & open it, double click on the flashplayer101r102_64_ubmac.dmg file, choose the Install Adobe Flash Player file to install... they don't make it easy!
Or I put up the smaller ones here...
http://dl.dropbox.com/u/450421/flashplayer10_1r82_76_ub_mac%20copy.dmg.zip
Stand alone player...
http://dl.dropbox.com/u/450421/LastFlashPPC.zip
Or free 3rd party...
http://www.wimpyplayer.com/products/wimpy_standalone_flv_player.html

Installing Adobe Flashplayer problem

Hi
I am trying to install Adobe Flashplayer for use with IE11
I click on the Install button and the Initialization graphic starts. Then after a few seconds I get a message saying "If you are having problems click here".
But the actual download stops or stalls.
Could it be the Norton Firewall stopping it. If so I have search Norton for a way to allow the download and cannot see what might be effecting it.
I use Windows 7
IE v11
Norton 360 Premier.
Andy Godfrey

Two bugs, one affecting Apple's Mac platform and another attacking Microsoft's Windows, exploit certain Flash player vulnerabilities to install malware onto users' systems, reports ArsTechnica. While users of other operating systems like Linux have yet to report attacks, Adobe's advisory notes the exploit affects all platforms.
Designated as CVE-2013-0634, the first vulnerability targets the Safari and Firefox Web browsers running on OS X, and is also being used as a trojan to deploy Microsoft Word documents containing malware. For Mac users, the flaw affects Adobe Flash Player version 11.5.502.146 or earlier.
On March 1 Apple again blocked Flash Player for Lion and Mountain Lion:
http://support.apple.com/kb/HT5660
The Adobe Flash patch can be found on Adobe’s website, and users can visit this page to check if their software is the most curent version.
You should uninstall any previous version first, and repair permissions after installing the new version.
If you still get a ‘plug-ins blocked’ message:
http://support.apple.com/kb/HT5271

Adobe Flashplayer problem

Whenever I go to use something that requires Flashplayer (YouTube, Live Nation, etc.) on Safari, I am getting the error message to download the latest version of flashplayer. I have done this and redone it multiple times, but the videos, etc. still won't work on Safari. I have uninstalled, reinstalled, restarted the computer, made sure that Java Script is enable, but am still getting the same message. I then checked to see if I had the same problem while using Google Chrome, but it is working just fine. I like Safari as my primary browser. Any suggestions on what might be going on?

I suspect your User Permissions may be off.
Run the #6 Step here and also the #12 OnyX cache cleaning routine for good measure.
Make sure to run all the OnyX cleaning and maintenance steps.
Step by Step to fix your Mac
Also read this, it might help clearing it's cache first, then uninstalling it, then reinstalling it once all the permissions have been fixed by the above steps.
How to install/uninstall Flash, fix problems
BTW, Chrome has it's own Flash, so it's updated by them.

Mac Flashplayer problem

Similar Messages

Maybe you are looking for