Mac freeze during the night sleep.

After system upgrade from 10.9.5 to 10.10 frequently I encontering computer lock with blank screen after resume from sleeping in the morning.
Everyday I leave computer to sleep with all my apps open (Oracle Virtual Box 4.3.18 ,Java IDE, Finder , Mozilla Firefox, JEdit and so.)
Now every offen (after Yosemite upgrade) in the morning computer doesn't wake up when I open the lid or press power button and the case temperature is very high (for a closed computer) more than 40 degres Celsius.
The only way to start it is to press power button for 10 sec and then press again shortly to starup freshly.
This beahaviour happened three times previous week.
On previous previous Maverick 10.9.5 before update this happened very rarrely (once a month)
Please check the following logs
26/10/14 22:47:46,570 discoveryd[56]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 192.168.1.1 Port 53 errno 50, fd 37, ErrLogCount 4 ResolverIntf:4
26/10/14 22:47:46,820 discoveryd[56]: Basic Bonjour,Warn Warning: IPv4 listener multicast send failed en0, 50
26/10/14 22:47:46,820 discoveryd[56]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en0, 50
26/10/14 22:47:46,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
26/10/14 22:47:46,000 kernel[0]: AppleThunderboltNHIType2::waitForOk2Go2Sx - retries = 10
27/10/14 00:35:42,000 kernel[0]: Wake reason: RTC (Alarm)
27/10/14 00:35:42,000 kernel[0]: RTC: Maintenance 2014/10/26 22:35:42, sleep 2014/10/26 20:47:47
27/10/14 00:35:42,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:35:42,000 kernel[0]: AppleCamIn::wakeEventHandlerThread
27/10/14 00:35:42,000 kernel[0]: Previous sleep cause: 5
27/10/14 00:35:42,000 kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 2 us
27/10/14 00:35:42,000 kernel[0]: AppleThunderboltGenericHAL::earlyWake - complete - took 1 milliseconds
27/10/14 00:35:42,000 kernel[0]: The USB device Card Reader (Port 4 of Hub at 0x15000000) may have caused a wake by being disconnected
27/10/14 00:35:42,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
27/10/14 00:35:42,000 kernel[0]: TBT W (2): 0x0040 [x]
27/10/14 00:35:42,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
27/10/14 00:35:42,201 sharingd[367]: 00:35:42.200 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:35:42,000 kernel[0]: AirPort: Link Up on awdl0
27/10/14 00:35:42,000 kernel[0]: IO80211AWDLPeerManager::setAwdlOperatingMode Setting the AWDL operation mode from AUTO to SUSPENDED
27/10/14 00:35:42,000 kernel[0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() Suspending AWDL, enterQuietMode(true)
27/10/14 00:35:42,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
27/10/14 00:35:42,323 hidd[78]: MultitouchHID: device bootloaded
27/10/14 00:35:42,000 kernel[0]: ARPT: 48134.036957: MacAuthEvent en0   Auth result for: f8:d1:11:83:3d:c6 MAC AUTH succeeded
27/10/14 00:35:42,000 kernel[0]: AirPort: Link Up on en0
27/10/14 00:35:42,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:35:42,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
27/10/14 00:35:42,423 configd[31]: LINKLOCAL en0: parent has no IP
27/10/14 00:35:42,000 kernel[0]: AirPort: RSN handshake complete on en0
27/10/14 00:35:42,430 networkd[269]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
27/10/14 00:35:42,430 UserEventAgent[20]: Captive: CNPluginHandler en0: Inactive
27/10/14 00:35:42,431 configd[31]: network changed: v4(en0-:192.168.1.48) DNS- Proxy-
27/10/14 00:35:42,433 discoveryd[56]: Basic WABServer NetResolverEvent no resolvers, resetting domains
27/10/14 00:35:42,434 discoveryd[56]: Basic Warn DD_Warn: Corrupt NSEC RDATA size
27/10/14 00:35:42,447 networkd[269]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
27/10/14 00:35:42,448 UserEventAgent[20]: Captive: [CNInfoNetworkActive:1709] en0: SSID 'myset' making interface primary (cache indicates network not captive)
27/10/14 00:35:42,448 configd[31]: network changed: DNS* Proxy
27/10/14 00:35:42,449 UserEventAgent[20]: Captive: CNPluginHandler en0: Evaluating
27/10/14 00:35:42,449 UserEventAgent[20]: Captive: en0: Not probing 'myset' (cache indicates not captive)
27/10/14 00:35:42,449 UserEventAgent[20]: Captive: CNPluginHandler en0: Authenticated
27/10/14 00:35:42,453 networkd[269]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
27/10/14 00:35:42,455 configd[31]: network changed: v4(en0!:192.168.1.48) DNS+ Proxy+ SMB
27/10/14 00:35:42,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:35:42,458 sharingd[367]: 00:35:42.457 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:35:42,000 kernel[0]: ARPT: 48134.088725: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
27/10/14 00:35:42,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:35:42,000 kernel[0]: AppleCamIn::wakeEventHandlerThread
27/10/14 00:35:42,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:35:42,510 sharingd[367]: 00:35:42.509 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:35:42,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:35:42,520 sharingd[367]: 00:35:42.520 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:35:42,000 kernel[0]: IO80211AWDLPeerManager::setAwdlOperatingMode Setting the AWDL operation mode from SUSPENDED to AUTO
27/10/14 00:35:42,000 kernel[0]: IO80211AWDLPeerManager::setAwdlAutoMode Resuming AWDL
27/10/14 00:35:43,000 ntpd[270]: wake time set +0.135503 s
27/10/14 00:35:44,156 discoveryd[56]: Basic Bonjour Failed to delete registration recordId=266 error=4
27/10/14 00:35:47,000 kernel[0]: AppleCamIn::handleWakeEvent_gated
27/10/14 00:35:47,000 kernel[0]: AppleCamIn::handleWakeEvent_gated
27/10/14 00:35:52,110 sudo[48929]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/killall pcscd
27/10/14 00:36:02,000 kernel[0]: en0: 802.11d country code set to 'GB'.
27/10/14 00:36:02,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
27/10/14 00:36:07,242 sudo[48944]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/killall pcscd
27/10/14 00:36:22,353 sudo[48959]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/killall pcscd
27/10/14 00:36:28,000 kernel[0]: PM response took 1004 ms (33, powerd)
27/10/14 00:36:28,000 kernel[0]: ARPT: 48180.142178: AirPort_Brcm43xx::powerChange: System Sleep
27/10/14 00:36:28,000 kernel[0]: ARPT: 48180.142184: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
27/10/14 00:36:28,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:36:29,000 kernel[0]: IO80211AWDLPeerManager::doDisable   source [handleSIOCSIFFLAGS]
27/10/14 00:36:29,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:36:29,000 kernel[0]: AirPort: Link Down on awdl0. Reason 1 (Unspecified).
27/10/14 00:36:29,000 kernel[0]: IO80211AWDLPeerManager::doDisable   source [setLinkState]
27/10/14 00:36:29,000 kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 2 us
27/10/14 00:36:29,000 kernel[0]: ARPT: 48180.835890: wl0: leaveModulePoweredForOffloads: Wi-Fi will turn off.
27/10/14 00:36:29,000 kernel[0]: AppleThunderboltGenericHAL::earlyWake - complete - took 0 milliseconds
27/10/14 00:36:29,000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
27/10/14 00:36:29,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
27/10/14 00:36:29,000 kernel[0]: en0: 802.11d country code set to 'X3'.
27/10/14 00:36:29,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161
27/10/14 00:36:29,351 sharingd[367]: 00:36:29.350 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:36:29,352 airportd[37]: _handleLinkEvent: WiFi is not powered. Resetting state variables.
27/10/14 00:36:29,355 discoveryd[56]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 192.168.1.1 Port 53 errno 50, fd 37, ErrLogCount 1 ResolverIntf:4
27/10/14 00:36:29,356 discoveryd[56]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 192.168.1.1 Port 53 errno 50, fd 37, ErrLogCount 2 ResolverIntf:4
27/10/14 00:36:29,443 discoveryd[56]: Basic Bonjour,Warn Warning: IPv4 listener multicast send failed en0, 50
27/10/14 00:36:29,443 discoveryd[56]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en0, 50
27/10/14 00:36:29,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
27/10/14 00:36:29,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
27/10/14 00:36:30,391 discoveryd[56]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 192.168.1.1 Port 53 errno 50, fd 37, ErrLogCount 3 ResolverIntf:4
27/10/14 00:36:30,391 discoveryd[56]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 192.168.1.1 Port 53 errno 50, fd 37, ErrLogCount 4 ResolverIntf:4
27/10/14 00:36:30,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:36:30,000 kernel[0]: AppleThunderboltNHIType2::waitForOk2Go2Sx - retries = 14
27/10/14 00:58:44,000 kernel[0]: Wake reason: EC.SleepTimer (SleepTimer)
27/10/14 00:58:44,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:58:44,000 kernel[0]: AppleCamIn::wakeEventHandlerThread
27/10/14 00:58:44,000 kernel[0]: Previous sleep cause: 5
27/10/14 00:58:44,000 kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 2 us
27/10/14 00:58:44,000 kernel[0]: The USB device Card Reader (Port 4 of Hub at 0x15000000) may have caused a wake by being disconnected
27/10/14 00:58:44,000 kernel[0]: AppleThunderboltGenericHAL::earlyWake - complete - took 1 milliseconds
27/10/14 00:58:44,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
27/10/14 00:58:44,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
27/10/14 00:58:44,000 kernel[0]: TBT W (2): 0x0040 [x]
27/10/14 00:58:44,201 sharingd[367]: 00:58:44.200 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:58:44,000 kernel[0]: AirPort: Link Up on awdl0
27/10/14 00:58:44,000 kernel[0]: IO80211AWDLPeerManager::setAwdlOperatingMode Setting the AWDL operation mode from AUTO to SUSPENDED
27/10/14 00:58:44,000 kernel[0]: IO80211AWDLPeerManager::setAwdlSuspendedMode() Suspending AWDL, enterQuietMode(true)
27/10/14 00:58:44,000 kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
27/10/14 00:58:44,301 hidd[78]: MultitouchHID: device bootloaded
27/10/14 00:58:44,000 kernel[0]: ARPT: 48183.015952: MacAuthEvent en0   Auth result for: f8:d1:11:83:3d:c6 MAC AUTH succeeded
27/10/14 00:58:44,000 kernel[0]: AirPort: Link Up on en0
27/10/14 00:58:44,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:58:44,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed
27/10/14 00:58:44,416 configd[31]: LINKLOCAL en0: parent has no IP
27/10/14 00:58:44,423 networkd[269]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
27/10/14 00:58:44,423 UserEventAgent[20]: Captive: CNPluginHandler en0: Inactive
27/10/14 00:58:44,423 configd[31]: network changed: v4(en0-:192.168.1.48) DNS- Proxy-
27/10/14 00:58:44,000 kernel[0]: AirPort: RSN handshake complete on en0
27/10/14 00:58:44,426 discoveryd[56]: Basic WABServer NetResolverEvent no resolvers, resetting domains
27/10/14 00:58:44,426 discoveryd[56]: Basic Warn DD_Warn: Corrupt NSEC RDATA size
27/10/14 00:58:44,438 networkd[269]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
27/10/14 00:58:44,439 configd[31]: network changed: DNS* Proxy
27/10/14 00:58:44,439 UserEventAgent[20]: Captive: [CNInfoNetworkActive:1709] en0: SSID 'myset' making interface primary (cache indicates network not captive)
27/10/14 00:58:44,439 UserEventAgent[20]: Captive: CNPluginHandler en0: Evaluating
27/10/14 00:58:44,440 UserEventAgent[20]: Captive: en0: Not probing 'myset' (cache indicates not captive)
27/10/14 00:58:44,440 UserEventAgent[20]: Captive: CNPluginHandler en0: Authenticated
27/10/14 00:58:44,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:58:44,442 sharingd[367]: 00:58:44.441 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:58:44,444 configd[31]: network changed: v4(en0!:192.168.1.48) DNS+ Proxy+ SMB
27/10/14 00:58:44,446 networkd[269]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
27/10/14 00:58:44,000 kernel[0]: ARPT: 48183.097019: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
27/10/14 00:58:44,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:58:44,000 kernel[0]: AppleCamIn::wakeEventHandlerThread
27/10/14 00:58:44,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:58:44,493 sharingd[367]: 00:58:44.492 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:58:44,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 00:58:44,500 sharingd[367]: 00:58:44.500 : SDStatusMonitor::kStatusWirelessPowerChanged
27/10/14 00:58:44,000 kernel[0]: IO80211AWDLPeerManager::setAwdlOperatingMode Setting the AWDL operation mode from SUSPENDED to AUTO
27/10/14 00:58:44,000 kernel[0]: IO80211AWDLPeerManager::setAwdlAutoMode Resuming AWDL
27/10/14 00:58:45,332 ntpd[270]: wake time set +0.480332 s
27/10/14 00:58:46,350 discoveryd[56]: Basic Bonjour Failed to delete registration recordId=277 error=4
27/10/14 00:58:49,000 kernel[0]: AppleCamIn::handleWakeEvent_gated
27/10/14 00:58:49,000 kernel[0]: AppleCamIn::handleWakeEvent_gated
27/10/14 00:58:50,859 sudo[48974]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/killall pcscd
27/10/14 00:59:05,976 sudo[48988]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/killall pcscd
27/10/14 00:59:21,093 sudo[49003]:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/killall pcscd
27/10/14 00:59:31,000 kernel[0]: PM response took 1920 ms (33, powerd)
27/10/14 00:59:31,000 kernel[0]: ARPT: 48230.025894: AirPort_Brcm43xx::powerChange: System Sleep
27/10/14 00:59:31,000 kernel[0]: ARPT: 48230.025898: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
27/10/14 00:59:31,000 kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
27/10/14 00:59:32,000 kernel[0]: hibernate image path: /var/vm/sleepimage
27/10/14 00:59:32,000 kernel[0]: efi pagecount 63
27/10/14 00:59:32,000 kernel[0]: hibernate_page_list_setall(preflight 1) start 0xffffff8294b51000, 0xffffff8294cb3000
27/10/14 00:59:32,000 kernel[0]: hibernate_page_list_setall time: 395 ms
27/10/14 00:59:32,000 kernel[0]: pages 2200624, wire 760638, act 507588, inact 518, cleaned 0 spec 25, zf 55417, throt 0, compr 113789, xpmapped 40000
27/10/14 00:59:32,000 kernel[0]: could discard act 130802 inact 387150 purgeable 153793 spec 90904 cleaned 0
27/10/14 00:59:32,000 kernel[0]: WARNING: hibernate_page_list_setall skipped 8372 xpmapped pages
27/10/14 00:59:32,000 kernel[0]: hibernate_page_list_setall preflight pageCount 760638 est comp 41 setfile 1396703232 min 1073741824
27/10/14 00:59:32,000 kernel[0]: AppleThunderboltNHIType2::prePCIWake - power up complete - took 1 us
27/10/14 00:59:32,000 kernel[0]: AppleThunderboltGenericHAL::earlyWake - complete - took 0 milliseconds
27/10/14 00:59:32,000 kernel[0]: [0xd247b0000, 0x19000000]
27/10/14 00:59:32,000 kernel[0]: [0xf34809000, 0x27000000]
27/10/14 00:59:32,000 kernel[0]: [0xf9c8f6000, 0x13400000]
27/10/14 00:59:32,000 kernel[0]: [0x0, 0x0]
27/10/14 00:59:32,000 kernel[0]: kern_open_file_for_direct_io(0) took 4 ms
27/10/14 00:59:32,000 kernel[0]: Opened file /var/vm/sleepimage, size 1396703232, partition base 0x0, maxio 2000000 ssd 1
27/10/14 00:59:32,000 kernel[0]: hibernate image major 1, minor 0, blocksize 4096, pollers 5
27/10/14 00:59:33,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 11 unplug = 0
27/10/14 00:59:33,000 kernel[0]: IOThunderboltSwitch<0xffffff8036b07800>(0x0)::listenerCallback - Thunderbolt HPD packet for route = 0x0 port = 12 unplug = 0
27/10/14 06:38:48,000 kernel[0]: vm_compressor_record_warmup (19945 - 22604)
27/10/14 06:38:48,000 kernel[0]: vm_compressor_flush - starting
27/10/14 06:38:48,000 kernel[0]: vm_compressor_flush completed - took 4831 msecs
27/10/14 06:38:48,000 kernel[0]: hibernate_flush_memory: buffer_cache_gc freed up 18963 wired pages
27/10/14 06:38:48,000 kernel[0]: hibernate_alloc_pages act 285082, inact 387648, anon 55389, throt 0, spec 90909, wire 763305, wireinit 196999
27/10/14 06:38:48,000 kernel[0]: hibernate_setup(0) took 6509 ms
27/10/14 06:38:48,000 kernel[0]: IO80211AWDLPeerManager::doDisable   source [handleSIOCSIFFLAGS]
27/10/14 06:38:48,000 kernel[0]: en0: BSSID changed to f8:d1:11:83:3d:c6
27/10/14 06:38:48,000 kernel[0]: AirPort: Link Down on awdl0. Reason 1 (Unspecified).
27/10/14 06:38:48,000 kernel[0]: IO80211AWDLPeerManager::doDisable   source [setLinkState]

Thank you for updates
I've checked again my power settings
# pmset -g
Active Profiles:
Battery Power        1
AC Power        -1*
Currently in use:
standbydelay         10800
standby              1
womp                 0
halfdim              1
hibernatefile        /var/vm/sleepimage
darkwakes            0
gpuswitch            2
networkoversleep     0
disksleep            10
sleep                10 (sleep prevented by AddressBookSour)
autopoweroffdelay    14400
hibernatemode        3
autopoweroff         1
ttyskeepawake        1
displaysleep         10
acwake               0
lidwake              1
I applied following parameter from terminal and I'll wait if this issue occure again.
sudo pmset -a autopoweroff 0
Hope it's help.

Similar Messages

Ports not working--mac freezes during hardware test

My immediate problem is my mac freezing during the hardware test. I know it can take some time for the test to be completed, but it was over an hour and it was frozen at "2 min 16 seconds," and the mouse and keyboard aren't recognized. Even during the short test.
I held the power button down and turned it off.
The bigger problem is non-functioning ports. First it was the firewire ports to my maxtor hard drive and then my lacie superdrive. And it's not the cord or the units. They work other places. That was approx. a month ago. I didn't worry too much and went back to the internal drive.
Then today my internet stopped working. The modem is not reading the computer and the computer is not reading the modem. The modem works fine with my laptop thank goodness (although it's a PC we bought for the kids to play computer games on and it's driving me crazy!). So the modem and cord are fine.
Then a couple of my USB ports were not happy today. One wouldn't read my daughter's ipod touch, but then later did (?).
And to go back to the very beginning, sometimes when I put the computer to sleep, it freezes on a black screen with a working mouse pointer, but nothing else and I have to force quit. If it goes to sleep on its own, it's fine.
Here's what I have done today: done the PRAM boot, some other command-option-O-F boot, tried the hardware test twice--it froze twice. Repaired all the permissions, reset the thing. All this I found out on the discussion groups.
I have read a lot of posts of similar problems and tried what was said there.
Am I heading for a crash? I cant back up my new stuff because the firewires are non-functional. I can't burn bunch of stuff to discs because the superdrive is going bad and won't burn properly (which is why I bought the LaCie which my computer now won't recognize.
I can't get anything off my computer except in bits and pieces with 2GB usb drive.
I know I'm rambling, but I've just spent 5 hours trying to fix this thing. Any suggestions? I'm going to take it in to the apple store to get it repaired tomorrow, but I'm worried I will lose all my data. Also I am scared of what it will cost. Is there anything else I could do tonight?
I'd love to have something else to try. Many thanks,
Barbara
Message was edited by: Barbara R.
Message was edited by: Barbara R.

HI Barbara,
It sounds like the hard drive is failing or has failed. Boot from your Mac install disc and if you can run Disk Utility in case the startup disk needs repairs.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*
If you cannot boot from your install disc, try booting in Safe Mode
What is Safe Mode
Carolyn

Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?

Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?

During sleep, your MacBook consumes a little part of the battery, so it won't harm leaving it in sleep mode. Also, you will be able to start using it quickly, as you don't need to wait until Mac OS X turns on.
I only recommend you to turn off the MacBook if you are not going to use it for days in order to save battery, but apart from that, you don't need to turn it off

My Mac turns itself on during the night?!

I've noticed that my MBP seems to turn itself on during the night - I think around 1am. I've looked in the Energy Saver Schedule and there's nothing set up for it to come on.
I'm a little confused as to what may be causing this. Any ideas would be much appreciated.

Do you have eyeTV on your Mac? This is what I've found to be the cause of my Mac turning itself on at 1am every morning.
If so, does your Mac turn itself on at a set time every day? If so, check what time that is in the Console. You'll need this so you can manually set your clock in order to test it all out.
I then decided to delete all preferences with elgato in the name in both my Mac prefs and User prefs (make sure you have your eyeTV serial number as you'll need to enter this when you next start up eyeTV.
Okay, then start up eyeTV and go through the whole process - just make sure you uncheck things that will be automatic i.e. channel listings etc.
Then quit eyeTV and set your computer clock to just around 40 seconds before it turns your Mac on and then put it to sleep - if it doesn't wake up then great - if it does then you'll need to delete the elgato prefs from just your User prefs and start up eyeTv again - go into the prefs of the program and uncheck anything that appears automatic i.e. automatically check for updates etc
Hopefully this'll work as it's worked for me - a bit of a pain but a least I no longer get woken up with the famous Mac BOOOONNNGGGG

Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

Trying to install visual studio on my mac and it is freezing during the install and I have to reboot, I have run out of ideas as to why it will not install. amy help with this would be greatly appreciated

maybe something is wrong with your install or your computers hardware as in a periodic defect
or the cd is dodgy
installed
vs express 2013 for desktop
vs express 2013 for windows (metro)
vs express for windows phone
on my windows 8.1 think I installed them when I was still using win8 though
without problems
when the same bootcamp partition was windows 7 ultimate 64bit
I was running
vs 2010 pro
and vs 2008 (for winCE)
without problems

Lumia 920 freezes/crashes during the night. Can't ...

I have had my Lumia for 10 days and for the second time it crashes during the night and the next morning I was not able to turn it on using the power button. I had to do a soft reset... The alarm that I set to wake me up never started... This means that I cannot trust my phone for waking me up in the morning! This is unacceptable!

There is a possible alternative to the flashing or reset suggestet by the care point.
As the problem only started recently, there is a high probability that it is caused by a bad app or setting or the combination of the two. The alternative is to reverse whatever apps you installed or settings you changed just before this problem started.
The flashing is just an easy way out because it reverts the phone back to its out of the box condition. However, you may find yourself in the same situation again should you install the same app or make the same setting changes after the flashing.
I had a similar problem with one app but I managed to isolate it and the problem disappeared after I uninstalled the app. The app was pulled subsequently and updated by the developer and is now working fine on my phone.

Keeping Stock Headphones in your ears during the night

Hi... it's been a while since I've posted, or even logged in for that matter. But anyways, I've got a question. If anyone knows what a Lucid Dream is, I had my second one in 2 weeks last night. (It's a dream in which you are aware that you are dreaming). Just read dreamviews.com. Anyway, I wanted to try this lucid remix song. It's on my iPod. But my problem is getting the earbuds to stay in my ears during the course of the night. I sleep on my back when using the earbuds, because they are painful when sleeping on your side.
Also, I'm using the stock headphones.
Thanks.

Well I only listen at about 15% volume during the night. And the lucid dream remix song is not constant noise. It's more slowly building tension, keeping that tension, releasing the tention, and occasionally saying frases such as "You will remember to check your reality and identify that you are in a dream state."
How do I tape them? Do I tape them to my head or do I tape them together.

Hey (: I have the new iPad and I want to ask what is "healthier" for the battery : turn the device off in the night or keep it on during the night ? Thank you !

Hey (: I have the new iPad and I want to ask what is "healthier" for the battery : turn the device off in the night or keep it on during the night ? Thank you !

BTW, statements like
"Use the device until the battery has drained to the point of self-shutdown. Basically, use it until it turns itself off."
in articles like the one at http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/ are complete BS and if you do follow their "advice", your battery life will be severely hampered. Particularly if you also follow one of the comments: "Step One.One: Leave the device for 5+ hours before start charging. This will fully drain the battery." Well, the guy that advised the latter certanly doesn't know anyhting about lithium batteries and the damage deep discharging does to them.
Again, what the article (and the above-cited comment) advices is complete b*llsh*t and noone should really do this.

IPad turns on itself and turns on WiFi after both shut down especially during the night

This happens to all my Apple devices, 3 months new MacBookPro, iPad mini, and iPhone. I shut things down when I am not using it, and I turn my phone off too. But, in the past couple of months, there are many times when I go to use my devices, especially the MacBookPro and iPad, they are turned on who knows when and how, remotely by someone or backdoor, and hooked on this website via WiFi: mzstatic.com.
Does Apple secretly collect user data? Is there back door preplanted into the system?
How can the devices turn them selves on after being completely shut down? and turns the WiFi on (I turn the WiFi off from the settings panel, not just the top tool bar), and hook themselves to this specific site? My security software shows this site belongs to Apple.
Please explain how this could happen again and again, no matter how completely you shut them down? Why it only happens when I am not using it,especially during the nights when I am sleeping?
<Edited By Host>

Is your battery dead or alive?
If the battery is dead, we must find out if it is:
1. Charger problem
2. Cable problem
3. Docking port problem
4. Wall socket problem

I have recently got a new replacement iPhone 4. since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening

I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!

You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device?

Process orders in the weekend moving during the night in APO/PPT1

Hello Gurus,
I have a problem on the scheduling of production orders when these orders are scheduled
on the week end.
Problem description:
On day 1 the short term planner schedules production orders in PPT1 (APO) on the
week end.
During the night these production orders are re-exploded in ECC (see: COR2 => Read
Master Data)
On day 2 the end production date of orders that were in the week end, have moved
by the system to the Sunday night.
Step 1: The order is scheduled on the week end on Saturday 14 March 2015.
Step 2: We explode the order in ECC
In ECC, we have:
But if we check the order in APO, we have:
You can see that the process order are placed at the night of sunday, also if in ECC after explosion was always where was planned.
Have you any idea how to avoid that the process order moving in APO ?
Thanks Gurus.
Livio

Hi
You may have 2 settlement rules for CO Products... So ensure you enter PA Trf Str at all the places... This error is never thrown by SAP w/o valid reason
br, Ajay M

Do not execute job during the night

Hallo everybody!
I have a background job that runs every 10 minutes.
I don't want it to run during the night. Is it possible?
Thank you very much indeed.
Mick

This may be helpful to you: 'At Operation mode' while giving start condition. Sap documentation says:
Operation Mode
Procedure
You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
Examples
Normal operation
Night operation
You may have to configure this operation mode in SPRO according to your requirement.
Thanks,
Priyanka

Can you block syncing of email during the night?

Is there a setting that block syncing during the night? Some time setting that you can put in a beginning and ending time to sync every day?

Sure this works, but it isn't exactly practical. To have push e-mail daytime but not at night you'd have to remember to activate/deactivate the feature twice a day.
Wouldn't it be nice if you had a settings pane where you could specify at which times you want push and not?

Error events 31551 and31552 only during the night

events error 31551 and 31552 started show up for some time every night 00:00 to 08:00 “SQL exception timeout expired... timeout period elapsed prior to completion... “
Also 16 events warning 2115 showed up in between the 31551-315522.
At all time we have many warnings 29202,
If not closely monitored our rms health service stops working ... "Staled" state
No backup runs on SQL db. DBs are backed up by sql on another lun that is backed up by Tivoli tsm.
No antivirus on Db.
The SCOM db have been moved 3 weeks ago on from SQL 2k5 to SQL 2008 r2 sp1.
My SQL admin found out that the SQL is generating lots of i/o (not all on disk, some in memory...) over 1 Tb of data every night for some time... During the day DW db size is 74062,56 MB
We moved SQL data and log folders on different luns, DW on its own lun. We moved the Datawarehouse on another lun, it made no difference.
The datawarehouse lun has long latency during the night, up to 15 sec.
No new MP installed in the past 8 months, only few overrides and disables recently
Our scom setup is 2007r2 cu7, rms on 2k3sp2, ms (acs) 2k3sp2 and ms 2k8sp2, 1 gateway in a dmz on 2k8 sp1 . Setup dated 2008 and 2011, all virtual Esx and approx. 150 agents.
From what we have read it seems to be related to performance, however we are unable to find root cause of issue.
Can you please help us determine what causes these error events to show up at night only...
Summary of error events follows:
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31551
Date:  04/06/2014
Time:  08:00:31
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. The operation will be retried. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.Relationship
Instance name: MMTRLPALPINF033.Prod.MJQ.Local
Instance ID: {0F390614-0505-F7C2-49A3-128862BF520E
Workflow name can also be "Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity "
One 31551 with following description
Failed to store data in the Data Warehouse.
The operation will be retried. Exception 'SqlException':
A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)
Event 31552
vent Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31552
Date:  04/06/2014
Time:  07:08:45
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.StandardDataSetMaintenance
Instance name: Performance data set
Instance ID: {3EC423BE-5714-81B5-AA64-29A3E158A7B6}
Management group: OPSMGR_P
Event Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Management group: OPSMG
The 31552 was mostly with Instance name: Performance data set
Some with Instance name: event data set or state data set and some with the RMS server.

Hi,
You have moved the database to a new SQL server. What is the collation on the new server? Only SQL_Latin1_General_CP1_CI_AS is supported. Please check free space in the SCOM DB's and transaction log DB.
Same issue here, please refer to this one:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/9be98791-1f41-4563-990f-0e5d622e7955/scom-2007-r2-failed-to-store-data-in-the-data-warehouse-exception-sqlexception-timeout?forum=operationsmanagergeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My iPhone is freezing during the "veryifying iPhone"

Why does it keep freezing during the verifying but work when I unplug the phone?

I found this link which is working....
http://support.apple.com/kb/HT1808

Mac freeze during the night sleep.

Similar Messages

Maybe you are looking for