.Mac front page hit counts list

Using iWeb with .Mac, I get hit counts only for the top 5 pages in my .Mac front page status column. I assume that's a standard and have found no settings to permit me to change this.
Is this it? Can we only monitor the counts for our top 5 pages without having to actually visit (and influence the counts of) the other pages?
If I'm missing something, I'd be grateful for a friendly hint on how to passively observe the hit totals on all marked pages. If this is just the nature of the beast, chalk it up as another straw in the growing pile under the sign labeled "frustrating shortcomings."

That's the way it's been since the Homepage days too. I'm not aware of any other way to show the "hits" for more than just the top 5.

Similar Messages

  • Iweb page hit counter

    If you are a .mac user you can click on Mac in the top menu bar. It lists Account, Mail, Address Book, My Pages, etc. Under My Pages, it lists hits for my . mac homepage pages and now I notice it will show hits for 5 of my iweb pages, but how can I choose which pages it it will show the hits to? My home page is the only page which has a counter and it is not one of those listed.
    Here is my site. http://web.mac.com/hooktrunk
    Dan

    Thanks. That was such a simple answer I feel quite silly. I wish I could assign certain pages instead. Oh well. Thanks again.

  • Page Utilization or Page Hit Counting/Counter

    Greetings all,
    With multiple updates needed on multiple versions of xMii, we are looking to gather some statistics on which pages are being used (and more importantly, which pages aren't)
    Looking for suggestions on ways to get some statistics on what pages are being utilized on xMii version 9, 10, and 11.
    Thanks
    Dennis

    Hi Dennis,
    There are lots of page hit counters available for HTML web pages.  I am pretty sure that you would not need to involve MII except possibly to return the data to a central reporting location.
    Regards,
    Mike

  • Apple, please help. Problems with counter on .Mac front page.

    This problem has been there for quite some time already. Kindly look into this.
    Thanks.
    http://discussions.apple.com/thread.jspa?threadID=1081633
    http://discussions.apple.com/thread.jspa?threadID=1081518
    http://discussions.apple.com/thread.jspa?threadID=992846

    Apple won't help via these forums; instead send your feedback to .Mac support via the form at the bottom of this link...
    http://www.apple.com/support/dotmac/publishing/

  • Outlook version of Hotmail has a corrupt front page, just a list of folders

    the normal Outlook Hotmail page has a toolbar on top, and selected message in main window. I now have a corrupt version with just a list of folders down the left side and no top toolbar.
    I am not IT literate and need help in a 'click this now click that' format.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • (Hit Counter)Very Urgent Plzzzzzzzzzzzzzzzzzzzz

    Guys can any 1 help me in developing a web page hit counter using JSP based on specific territory .....hope u guys got it ????? For ex: i want to count number of hits only from US
    Message was edited by:
    M......Factor

    Lol, BalusC was written while Java 1.5 wasn't out yet.still no need for the newb-crushing ternary logic :-)
    public class BalusC {
        public boolean readTopic(Topic topic) {
            return !topic.getSubject().toLowerCase().indexOf("urgent") == -1;
    }

  • Hit counter not showing in .mac

    I have finally republished my web site in iWeb 08. I have si opages in total, and five of them helpfully show up in summary in my .mac homepage, together with a hit counter. However, the sith page is my home page, the one I mostly care about, and this isn't in the list. Is the .mac list limited to five pages? And if so, can I select which five pages it lists?

    Take a look at TextEdit available in your Applications folder. Open it up and then look at the Preferences window. Click on the "Open and Save" tab and then check off the box to "ignore rich text commands".
    Now you'll want to find your HTML file. If you are NOT publishing to .Mac, then you are using the "Publish to Folder" command in iWeb. You'll then be left with a folder full of files that make up your website. Look inside that folder and you should see a bunch of files that have the .html extension. These are the HTML files that you will want to edit. Find the .html file that is associated with your page. For example, if you page is named "welcome" then there should be a file called "welcome.html".
    Control-click on the appropriate .html file and then select "Open with...". Choose TextEdit from the window and then you should see the HTML code for your page! Edit away and then when you are finished just type Apple-S to save your changes. Don't use "Save As..."...just Save.

  • Counter Report on .Mac home page

    The counter to the home page of one of my sites works, however, it does not display on the Apple .Mac Welcome page in the My Pages report section. This has been a handy feature for monitoring hits. But it no longer reports this particular page, though it has more hits than all the others. Ideas? I've tried reposting the page.

    Actually, the .Mac start page shows separate counters for both my top 5 .Mac sites and what is SUPPOSED to be my top 5 iWeb sites. The problem is that sometime in the recent past, that .Mac page decided to restart itself from, say, 5 posts ago to now instead of taking into account ALL my pages.
    I can still go and check manually, but, since I'm not hosting any ads, it's more for curiosity than anything else and isn't worth that much trouble If it was fixed, though, then I'd have a better idea of what kind of projects people would like to see.
    http://www.makentosh.com

  • Hit counter on .Mac

    I've found that since upgrading to iWeb '08 the hit counter under My Pages on my .Mac home page is no longer there. It worked fine while I was working with iWeb '06. Everything else appears to be in order. The hit counter is working on the web page itself. Anyone with similar experiences?

    I am having a similar issue: hit counter worked for a while but today it no longer appears in published folders/internet. Could there be a corrupt file(i.e .plst)?

  • 2nd Hit Counter on Site not showing up on different page

    I am so close to being done with my Illustration website- 11 pages and only one last bug I can't figure out. I have a second Welcome page that I have hidden and not yet posted. I have no idea where the the hit counter is on the page, it is checked off as there- it doesn't load online or visible on iWeb, yet Insert/button has it as there. I have another hit counter on the site that works fine. I have saved, relaunched, no hit counter on this page. Deleted it, tried again and no luck.
    Here is the site:
    http://web.mac.com/yvette
    The page that I am working on but is not in the menu:
    http://web.mac.com/yvette/iWeb/Site%204/Welcome.html
    The hyperlink works fine but no hit counter.
    Thanks-
    Y

    no hit counter on this page
    The hit counter is in the footer area, but you set the page content height too short, set content height longer or move hit counter out of the footer and into body area.
    One other little issue- On my Menu, the "Fantasy" link doesn't let you use the Fanatsy section at the top of the page. It is one of 11 pages, all connect fine, this one is at the upper most right top
    I think it is block by this image: http://web.mac.com/yvette/iWeb/Site%204/Menufiles/shapeimage9.png
    You need to send it backward.

  • TS2756 I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do no

    I'm trying to connect my ipad2 to my phones wifi hotspot. my phone says hotspot is activated and it shows up as an option on my ipad but when i hit that on the ipad it shows a page with a list of things like ip address, domain, url. what do i do now?

    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/HT4517
    Use Bluetooth to tether your iPhone, iPod touch, or iPad
    http://www.macworld.com/article/1159258/bluetooth_tethering.html
    How to Connect an iPad to an iPhone Via Bluetooth Tethering
    http://techtips.salon.com/connect-ipad-iphone-via-bluetooth-tethering-25472.html
     Cheers, Tom

  • How do I get my iPhone to stay listed under devices on iTunes page after I have unplugged my iPhone from my Mac? My iPad stays listed under devices.

    How do I get my iphone to stay listed under devices on Itunes page after I have unplugged it from my Mac? My ipad stays listed under devices.

    Phone not recognised in itunes
    iPhone not recognised by iTunes on PC  or  iPhone not recognised by iTunes on Mac

  • Count total page in ABAP list

    Dear Expert,
    Please help me, how to count total page in ABAP list ?
    Any suggestion or idea to solve this question ?
    Thank you.
    Really appreciate your respond and solution.

    In the first statement of ur report u'll have to reserve some lines for footer as follows:
    REPORT <prg name> LINE-COUNT 25(2).
    here ur list will display 23 lines of data and then 2 lines are reserved for footer.
    This means that in each page u can display 23 lines of text.  Now depending on number of entries in your internal table which contains data to be displayed, we can calculate the number of pages required to print the total output.
    E.g: I have 62 records in my internal table, so to get the total number of pages use the following logic:
          (U can find out the number of recs in internal table dynamically using DESCRIBE stmt)
           62/23 = 2.69
           Round the result to the next integer using CEIL , so the next interger is 3.
           So ur total number of pages is 3.  And u now the current page number by sy-pagno.
    Hope this solves ur problem.

  • Get hit count of a page or a dashboard (usage tracking)

    hi, experts, I found that I can get the query count (using count(*)) from usage tracking.
    but is it possible to get the hit count on a particular tab page or on a particular dashboard? not the query count on a page or a dashboard.
    thank you very much!

    Hi Nicolae,
    I did some digging and I found a few things out.
    Point 1) The OBIEE .dll files are what build up the HTML files based on their code and some "customizable" code in the XML files located in the messages folder of OBIEE (C:\OracleBI\web\msgdb\messages). I say "customizable" with quotes because although these files are editable, it is not supported by Oracle and any upgrade will overwrite your changes. That being said, we cannot change the code in the dll files, so our only other option is to play with the XML files and see if we can inject our script somewhere in their code.
    Point 2) The absolute last message from an XML file is the message that wrote the div with id="idSelsPermissionsDlgDiv". I had to do some grep'ing but I located the file which generated the final DIV. It is the commonuitemplates.xml file line 161. The bad thing is that the particular WebMessage is called multiple times ( I think three times based on my tests) in the building of the HTML. So if you put the code here, it would show up three different times in your HTML. Not ideal :(
    Point 3) The dashboardtemplates.xml document, line 410 is executed about four lines before the final body tag. This WebMessage is only executed once, so it is the closest you can get to the bottom of the page without having a duplicate entry. I recommend you paste the code from google right before the final html tag on line 410.
    Hope this helps!
    -Joe

  • Most recent 5 entries on front .mac podcast page

    I'm trying to use a .mac account to get podcasts on the iTunes store. I've got everything set up, but only the 5 most recent podcast entries show up on the front page of my .mac podcast page. Older entries get pushed into the archive page.
    Then, on the iTunes store, only my 5 most recent entries show up.
    Has anyone else encountered this? Is there a way I can get the podcasts that are in my archive to show up on the front page, and/or at the iTunes store?
    Thanks

    if you want to have all of your entries to appear on the front page you need to go to the INSPECTOR, then to the RSS tab and from the scroller, choose how many entries you want on the fron page.
    max

Maybe you are looking for