MAC G5 2004 are the 400 and 800 firewire busses interconnected?

When I plug in a DV camera to the 400 firewire buss and go to system profile/firewire, the DV camera doesn't show up.....but, when I turn the firewire hard drives off (pull their power) thus disconnecting them from the 800 firewire buss, the DV camera shows up....
If I have my firewire external drives connected to the 800 firewire port, and the DV camera connected to the 400 firewire port sometimes (not often) the the dv camera works, most of the time it doesn't..... help!
The only way I can get the dv camera to work is to disconnect the firewire hard drives from the computer then all is good in the land of "MAC).....

The external hard drives have their own power.....turns out that the 400 and 800 firewire busses are the same.....What Apple did was an 800 firewire buss and has 1 port located on the rear of the tower and 2 400 ports (one one the front and one on the back). The 2 400 ports are equal to the 1 800 port, so when you use one 400 port and 1 800 port the 800 port becomes another 400 port. In other words.....I only have 1, 800 buss and not an 800 buss and 2 400 busses....pretty tacky if you ask me......also, I learned that the Canon DV cameras (ZR70MC) is a real hog when it comes to firewire, so, when I have my external hard drives plugged into the 800 buss and the Canon plugged into the 400 buss, it's on overload and their is no buss protocal for who uses what. Which means if the external drives are using the buss the Canon is out of luck......The solution is to install a separate firewire card and plug either the Canon or the drives into it thus freeing up the internal 800 buss for other uses.
The workaround is for me to unplug the power to the external hard drives, plug in the Canon, capture all of my material onto the internal drive, once I've captured all of my files, remove the Canon from the buss, powerup and re-mount the external drives, then, move all of my captured files over to my work space which is located on one of the external drives......what a pain in the butt......but that's the way it works.....

Similar Messages

Simultaneously downloading with the 400 and 800 FireWire on the Mac Pro

During a Mac Pro training Web Cast the speaker related that one could download with both the 400 and 800 FireWire simultaneously, however the speaker never explained how to do that.
How would you go about downloading simultaneously?

The external hard drives have their own power.....turns out that the 400 and 800 firewire busses are the same.....What Apple did was an 800 firewire buss and has 1 port located on the rear of the tower and 2 400 ports (one one the front and one on the back). The 2 400 ports are equal to the 1 800 port, so when you use one 400 port and 1 800 port the 800 port becomes another 400 port. In other words.....I only have 1, 800 buss and not an 800 buss and 2 400 busses....pretty tacky if you ask me......also, I learned that the Canon DV cameras (ZR70MC) is a real hog when it comes to firewire, so, when I have my external hard drives plugged into the 800 buss and the Canon plugged into the 400 buss, it's on overload and their is no buss protocal for who uses what. Which means if the external drives are using the buss the Canon is out of luck......The solution is to install a separate firewire card and plug either the Canon or the drives into it thus freeing up the internal 800 buss for other uses.
The workaround is for me to unplug the power to the external hard drives, plug in the Canon, capture all of my material onto the internal drive, once I've captured all of my files, remove the Canon from the buss, powerup and re-mount the external drives, then, move all of my captured files over to my work space which is located on one of the external drives......what a pain in the butt......but that's the way it works.....

Is firewire 400 and 800 on the same bus?

I have heard of the problems putting a camera and external hard drive on the same bus for capturing video. Does the 400 and 800 ports share the same bus and will using both with one connected to an external 800 drive and the 400 port for the camera be a good solution for capturing video?
Much appreciated.

yes, on PowerBooks w/1394a and 1394b ports, and on the G5's with 1394a and 1394b ports, they all share a common bus
sometimes if you have a lot of activity on the bus, you might have some frame drop out with a camera connected (but this is not a constant)
it never hurts to add a PCI card or cardbus card for PowerBooks and create a second FireWire channel that is independent of the builtin ports

Firewire 400 and 800 problem ? Need confirmation

OK, I have been running 2 external Lacie HD's over a USB hub into my MacBook Pro. A couple of weeks ago I decided that I needed more storage so purchased 2 Western Digital MyBook Pro's at 500GB.
I got these two specifically because I knew they supported Firewire 800 and wanted to take advantage of the high speed connection.
All is going well until yesterday.... Let me explain my set up. Firstly I am a DJ and use a Firewire Audiophile soundcard from M-Audio, this connects to the 400 port on my MacBook Pro, and the HD's connect to the 800... When I play music I get audio drop outs... I have looked through the forums and I am under the impression that both the 400 and 800 ports on my MacBook Pro run on the same connect, so is this the cause of the audio drop outs ?
I connect the 2 HD's via USB and have no problems, am I right in thinking that I have wasted good money on getting 2 HD's that I'm not going to be able to use the 800 port with ? When I run the audio through the internal soundcard I get no drop outs !
Also.... Just to annoy me even more I have a 20" cinema display so if I have use USB I decided to connect the two HD's to this and then to the MacBook Pro, now the problem here is when my MacBook Pro goes to sleep one of the HD's wakes up the MacBook Pro as it has been removed incorrectly ??? Do I now have a problem with one of my USB ports on the cinema screen also ????? I have put my iPod in the port and no problems ?
Does anyone know how I can solve these problems without having to spend even more money ?
And can someone confirm if the 400 and 800 ports are on the same connection, if so, whats the point ???
Thanks
- Neil

neil,
I wouldn't do that right away.. USB audio interfaces are usually at the more consumer end of the market, I don't think it's the best way to go just to solve your problem.
did you read the part in my post about PCexpress cards that give you a totally new and independent FW800 bus? seriously, I think this is your best bet. these cards first came out when the original series of MBP didn't have FW800 on them (only 400) much to the consternation of video pros.. so 3rd party vendors made a card solution. as I said, they aren't expensive, I would have thought around or under $100 US. connect one of those to your MBP's express slot and your problem is solved. you'll have a powerful, dedicated FW channel just for those FW800 drives you bought. then, your m-audio interface will be fine. and even if you still want to get rid of it and get a better interface, you won't be forced to go to USB which generally means opting for a lower end of the market interface.
also one other thing.. I don't know what your actual audio i/o needs are. but if you only ever work with stereo out and stereo in, ie, you never need more than 2 physical outputs and 2 physical inputs, then you have other options. the MBP (and in fact all macs) have optical digital audio built in. you can buy a 2in 2out digital to analog/analog to digital converter and connect it to the opticals. then, you'll never need to worry about FW or USB bandwidth ever again, nor will you ever need to think about drivers or compatibility or updates either.
on my MBP I use logic pro. and on this system, I only ever need a stereo out to hear what I'm working on with good quality.. and when I record actual audio tracks, it's only ever one source at a time, like a mic input or an instrument. so I do not need an interface at all, I use the opticals and I love it. I bought a mindprint trio, not the USB one, but the one that uses optical i/o. it just connects to the same connectors on the MBP that you would connect headphones or a mic, but obviously uses the digital optical signal not analog audio. it sounds really very good. the trio itself is a very handy little box that conveniently lets you do a lot of things to work comfortable when recording. and I just use built-in sound, no drivers needed ever, which is very much a rare relief in the audio world, believe me.
anyway, hope this helps. and seriously check out a card for FW800, in my opinion it's the best solution to your problem no matter which way you go.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

The speaker of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

the speakers of my brand new mac book pro are not working and I cannot plug in the earphones, the hole looks smaller than the pin or with an obstruction. anybody can help? thanks

Hi talero,
Contact AppleCare or bring it into an Apple Store or AASP.

Are the eMac and the G4 Mac Mini similar enough to...

use the eMac's tiger upgrade to upgrade my mini to Tiger? I know the other versions of tiger upgrades are specific to the hardware, i.e. powerbook, ibook, imac, ect. But seems to me eMac and the G4 mini are very similar. Possible?
thanks
~bill

" Are the eMac and the G4 Mac Mini similar enough to use the eMac's tiger upgrade to upgrade my mini to Tiger? "
No.
"I know the other versions of tiger upgrades are specific to the hardware"
And so are the eMac's upgrade discs.

Audio interface for 24" iMac - conflict between firewire 400 and 800?

So, what I have now:
2.8ghz iMac, latest model, newest firmware, running OS 10.4.11, connected to an M-Audio Ozonic Firewire 400 interface, and I was hoping to run said interface while ALSO connecting a firewire 800 hard drive for samples, or for recording to.
Alas, as soon as I turn on the firewire 800 drive, a model sold by Other World Computing and containing an Oxford chipset, all audio stops on the Ozonic keyboard and is replaced by clicks and pops. The only way I've found to get the audio back is with a complete restart of the system, with the firewire 800 drive OFF.
For those of you who aren't familiar with the M-Audio device, it's a small keyboard and firewire audio interface in one unit. Perhaps not the highest quality, but my Powerbook G4 1.67 with firewire 800 CAN run both the Ozonic and the firewire 800 drive at the same time. With no interruption in sound playback.
I did some research and discovered that in the iMac I bought, the two firewire channels, 400 and 800, appear to be on the same PCI E bus, and perhaps will NEVER work together.
Is that right? I thought the whole point of firewire was how it's able to negotiate such communications and work seamlessly with other firewire devices. I know, I know, I'm living in dreamland, it's just sad that a much older Apple product (my PPC notebook), can do something a brand new model cannot. Sigh.
Any advice? Any chance 10.5 fixes this?
If not, should my next audio interface be USB 2.0? Any thoughts from the Audio pros out there (besides 'you bought the wrong machine) would be great.

Sorry I can't help with your specific query as I have never used that Audio hardware.
I am a video man myself and went for the 24" 2.8Ghz iMac as i believe the Firewire 400 and 800 Buses are seperate. I know on older iMacs and even the MacPro the FW800 and 400 buses were on the same bus and when connecting a firewire video camera to the FW400 bus, the 800 would lower it's speed to 400 to accomodate or in some cases would lose the connection all together.
I currently have a FW800 Hard drive connected to the FW800 port and a video deck in the FW400 port and they both run at full speed 800/400 respectively.
This leads me to believe Apple have fixed the Firewire sharing problem.
I know it's no help but just though I would share my experience with the Firewire on the new iMac.

Firewire 400 and 800 together

I have 2 external HD firewire:
120Gb Firewire 400 and 500Gb Firewire 800.
They work fine EXCEPT when I connect both HD to my PB.
I have to use 1 at a time, not together.
Do I have to do something to use them togheter?
Its both LaCie HD
PB G4 17" 1.67/1x1Gb/100Gb Mac OS X (10.4.8)

I tried once hooking a 400 drive into the 400 port, and an 800 drive into the 800 port, then transferring a big file between them. A 1.2 GB file finally stalled at about 10 hours. I then daisy chained the 400 into the 800, and the 800 to the PB, and that worked fine. I now frequently hook 4 of them, only 1 of which is 800, and as long as it is hooked thru the 800 to the PB, it works fine. If I unhook the 800, and plug the chain into the 400 port, that works fine. I don't have the right cables to go the other way, but that would slow down the 800. I can hook it in as 400 in the case of hooking it all up to my MacBookPro without FW800.

Logic Pro 9.1.7 firewire 400 and 800 not working

I am having issues with Logic Pro 9.1.7 recognizing FW 400 and 800 connections, and/or my FW interface (mbox2 pro). When I open up LP I often do not hear any sound and have to reboot or reconnect FW cables, per another post suggestion with ProTools 9. After 30 minutes of restarting twice, unplugging / plugging in FW cables, turning off/on FW drives, it's finally up and running.
But the weird thing is that sometimes it opens up fine and other times it does not. I don't understand this variable, as my setup always remains the same.
I am guessing this is a Mac OS issue, but I'll list my setup in case anyone has any suggestions:
MacBook Pro OS 16.6.8
Mbox2 Pro interface (blue) - connected via FW 400
Firewire drives on both 400 and 800 connections
I realize this could be a host of issues other than Logic Pro 9, such as Audio Midi Setup (which often doesn't recognize my Mbox2 Pro). But again, thought I'd start here.
thanks

Hi
glankrudolph wrote:
I realize this could be a host of issues other than Logic Pro 9, such as Audio Midi Setup (which often doesn't recognize my Mbox2 Pro). But again, thought I'd start here.
If Audio MIDI Setup cannot see/recognise the MBox, then Logic will be unable to see it. Audio MIDI Setup is at OS level: if your MBox does not show up it is likely to be:
Driver issues (highly likely)
Cable Issues
FW socket issues: hardware fault.
CCT

HT204053 What are the pros and cons of 1) choosing to use the SAME Apple ID for iCloud services on one side, and purchases on the iTunes Store, App Store, and iBookstore, on the other side; or 2) to have and use two separate Apple Ids for these "two sides

All is in the title, so I repeat it below with a better identation.
What are the pros and cons of
1) choosing to use the SAME
Apple ID for iCloud services on one side, and
purchases on the iTunes Store, App Store, and iBookstore, on the other side; or
2) to have and use two separate Apple Ids for these "two sides"?
P.S.
I have loads and loads of free podcasts in iTunes in my iMac, that are certainly more thant the 5 gigas the iCloud provides for free, so I don't want those to go to the cloud. But this is perhaps a different question...
Also need to mention that I have itunes on a mac, a pc and an iphone.
Sorry to look so silly with this question, but I don't get the "big picture".

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

After the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

What are the pros and cons re using an intel iMac vs MacPro with LP8?

I'm considering getting a new intel Mac in the near future (presuming a new MacPro will be released in the near future - maybe at the same time as Leopard). I compose largely for film and television and I am composing largely using a combination of loops, software instruments and some recorded live performance. I usually sync to a low res quicktime movie.
I do like the idea of a simple and uncluttered work environment with an iMac, added to which there's also a degree of portability with the iMac however the MacPro is obviously more powerful. I'm not sure how much the difference in power between the two computers would affect me.
Would I be compromising myself much if I went for the iMac over the MacPro? What are the pros and cons of the iMac vs the MacPro in relation to Logic Pro 8?

In the world large-scale music composition using samples, loops, etc (especially for film) your two biggest needs are RAM and HD speed/access. The imac looses big time in this department (as a single computer at least) as it can only be upgraded to 4gb ram, and only holds one internal HD, and also lacks any PCI expansion for DSP cards, audio interfaces, etc.
In generalyou want to separate your data vs applications as much as possible, to ensure both can be accessed quickly and easily by the computer. So its best to have your system software / applications on one internal HD, and your logic data (samples, audio recordings, loops) on another drive(s). You can do this with an iMac via USB, FW800, & FW400, but depending on how big your projects get, how many USB and FW drives / interfaces you use, and how much data you need to stream, you could overload the buss on the imac (not sure if it has multiple busses or not). Plus speed wise, internal SATA are much faster than external drives, and the mac pro with its 4 internal slots seems like a great choice for speed and flexibility.
However, if you dont find yourself doing large scale projects, then you might be better off going with an imac. We just purchased one for my father and it runs great! It blows the socks off of my Dual 2.5 G5 tower in terms of CPU speed! If you run into problems running things from the imac, you could always add a mac-mini down the road to stream sample libs, as a Logic node, etc, which seems to be a much more cost effective solution.
I hope this was helpful, but I probably just made the decision harder . In fact, if I were to start over today, I dont know if I'd go with a MacPro, or an iMac / mac mini combination. they both seem to have their advantages / disadvantages.
Best of luck!

I currently have a Macbook pro 10.6.8 and i'm interested software upgrade What are the advantages and disadvantages for upgrading my software.

Ok... the only reason why i want to uprade my software is because of StarCraft 2. For those that don't know, Heart of the Swarm is coming out this March. I've been eagerly waiting for this expansion. I just read that SC2 HOTS will not be able to support any software below lion. I currently have 10.6.8 and i was wondering what are the disadvantages and advantages (aside from being able to play this expansion) of upgrading my software? Are there any draw backs, etc.

Go all the way to Mountain Lion if you can...
Upgrade to Mountain Lion
But...
Before attempting any Major Upgrade... get yourself an External Hard Drive... and create a Bootable Clone Backup of your current Hard Drive...
By far the easiest way to make such a Backup, is to use something like
SuperDuper http://www.shirt-pocket.com/
or CCC http://www.bombich.com/
That way, should anything untoward happen during the Upgrade,
you will NOT LOSE ANYTHING.
(Get an EHD that is at least equal to your current Drive...)
Also, get more RAM...
You can use this Link to check which RAM is suitable for your Mac...
http://eshop.macsales.com/shop/apple/memory/
It is Important to get the Correct and Matching RAM
For best performance, fill all memory slots, installing an equal memory module in each slot.
That site also has videos on how to Install RAM should you need it...
Here are Apples Instructions... Installing RAM
MBP http://support.apple.com/kb/ht1270

Upgrading from 10.4.11 to 10.7. What are the steps and do I also need to pay for 10.5 and 10.6 along the way?

Hi. I wannt to upgrade from 10.4.11 to 10.7.
What are the steps and do I also need to pay for 10.5 and 10.6 along the way?
According to the 10.7 lion page on 'store' it says that you need 10.6 to use it does this mean I'm going to have to do 3 upgrades?
Thanks

Why do yoy want Lion/10.7???
Anyway, if your Mac meets the requirements you can skip 10.5.x, and even 10.6.x if you can afford to erase all your data.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory[14]
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading[14]
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
http://www.apple.com/macosx/how-to-buy/
What applications are not compatible with Mac OS X 10.7 "Lion"?
http://ow.ly/5Iz09
http://roaringapps.com/apps:table

MAC G5 2004 are the 400 and 800 firewire busses interconnected?

Similar Messages

Maybe you are looking for