Mac G5 and second 23" display

I already have one 23" (silver) display and would like to use another for all my post production. I'm using a GeForce 6800 Ultra DDL card and my mac is 2.3 ghz. If I get a second 23" display what kind if any issues will I have, even if I can even use a second display?? Lastly, I only have one input DVI on my mac. I guess I'll need to add another slot? Thanks in advance for you awesome wisdom of knowledge.
Correction, I do have two DVI in the back of my mac
Kevin
Message was edited by: Kevin Houghton

Thank you, thank you and thank you. Your awesome in reply so soon.
Kevin

Similar Messages

I have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?

No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris

Mac Mini and the Dell Display

Has anyone ever used the Mac Mini with a Dell Display? Specifically, the Dell SP2309W. If so, how well the two work together? Thanks in advance!
http://accessories.us.dell.com/sna/products/Displays/productdetail.aspx?c=us&l=e n&s=dhs&cs=19&sku=320-7641

I bought one of these when they first came out. It's a nice monitor but the camera has been a bust. It just won't work reliably. Maybe the firmware has been improved since when I bought mine. But if you care about the camera and mic working, you should investigate further to make sure it's working better than it is on mine.

HT6114 I just updated the last version of OS X Mavericks on my Mac Pro and my Thunderbolt display is not working correctly

I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help

Reset the NVRAM/PRAM and Reset the SMC, then try again.

New Mac Pro and LED cinema display

Sorry if this has been asked before, I tried searching for it but none of the topics answered my question specifically enough.
I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro and what happens to the power cable that's attached to the LED display?

I have a 24" Apple LED Cinema Display purchased less than a year ago. Will it connect to a new Mac Pro
Yes. All the standard cards that come in the Mac Pro have one Mini DisplayPort. The 24"LED display will plug into that.
and what happens to the power cable that's attached to the LED display?
It is not used if you don't have a MacBook.

New Mac Pro and Apple Cinema Display

Warning, for those of you upgrading to the new Mac Pro and you plan on using your old Cinema Display, you will not get the maximum resolution out of the display. In fact, you only get 1650 x 800--which of course is way under utilizing install resources and on top of that not a great picture. Even using recommended set up (mini display to DVI adaptor) does not help. You need a Thunderbolt Display for best video performance. Unless someone out there knows a way to do this--be prepared also to buy a new display.

Turbostar, it is the Apple 30 inch cinema display. Yes it works but the max resolution is 1650 X 800 which while acceptable does not get me 2560 x 1600 which my D500 GBUs would deliver. The new Pro is optimized for a Thunderbolt display, I am using the correct connection protocols as recommended by Apple on their web page for this system. There is a specific note in Apple support noted that Cinema displays will only provide xxxx resolution on the new Mac Pro's. Corsair.

Mac Air and an apple display

Hi I have a mac Air and want to connect an apple display but the connector is smaller than the port, what do I have to buy to get the 2 connected? Nick

Hardware Overview:
Hi is this the information you require? Nick
Model Name:          MacBook Air
Model Identifier:          MacBookAir1,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          1.6 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          2 GB
Bus Speed:          800 MHz
Boot ROM Version:          MBA11.00BB.B03
SMC Version (system):          1.23f20
Serial Number (system):          W88xxxxxx
Hardware UUID:          EFCACEAB-C7ED-5D75-B64D-4FFCCB3855B8
Sudden Motion Sensor:
State:          Enabled
<Edited By Host>

Mac mini and lcd tv displays

I currently have a g3 ibook and a g4 imac. I've been debating on what i should buy as an upgrade. I've been torn between virtually all macs including the powerbook, ibooks, imac, and the mac mini. I'm moving in a couple of months to a temporary residence where space will be limited. I just purchased a very nice philips 37 inch lcd display with vga inputs and hdmi inputs. After much thought this is what i think i'm going to do.
Sell the G4 imac or give to my parents. Keep the G3 ibook but install the max ram for it (is 512mb the max for this old cpu) and replace the old airport card with a new airport extreme card. Buy an extreme base station. Get a mac mini w/ wireless mouse and keyboard and run it through the philips. Any thoughts?
If i go this route i keep the ibook for portability and the mac mini gives me a more powerful at home cpu. This would keep costs down and not take up as much space. Anyone have their mini hooked up to their lcd tv?

Hi Martin,
I appreciate your thoughts : I have a G3e key Lime Clamshell 466MHz iBook, I put a 256MB SIMM in to take the iBook up to 384mb and it's now OK for Tiger - I used the Apple Video Out cable to a sony CRT TV via SCART and was able to struggle thru Bridget Jones 2 on DVD , but got a headache! Wife was UNHAPPY. suggestion is avoid!!!!!!!!!!!!!!
(maybe sell your iBook at a premium on an online auction website?)
I'm pretty sure that Airport Extreme cards - being a different size and shape from the old ones won't allow you to upgrade that way. I did buy an Airport Extreme enabled Mac Mini 1.25GHz 40GB 1GB RAM for driving my Dell 26" LCD TV/Monitor. It is F A N T A S T I C ! The Dell W2600 came with DVI to DVI cable which plugged straight into the Mini's DVI with no adaptors. The Dell was recognised and a profile was loaded by 10.3
Most important point :-
I adjusted the Mac Mini screen output resolution to EXACTLY the Dell W2600 Native Resolution of 1280 x 768 (WXGA) (720p HDTV).
with a mismatched native resolution the modern TV's like your Philips 37" will start to resample and might make artefacts (mine did!)
The Mini's 32MB video RAM will not drive much higher screen resolutions than 720p anyway!
Well, after some playing , and loading of helper programs like VLC and MTR , then you'll find that Mac Mini to big LCD is the best ever quality that you've seen your DVD's played. When you download the Apple QT7 H.264 HDTV 720p trailers, you'll have seen the best ever TV quality imaginable!!!!
for extended use as a desktop PC, the Mac Mini would be better firing into a 17-19" LCD,
the 26-42" displays are so big that you have to stand 6+ feet away from them at least !!
I used a BT dongle (I had it lying around) and the Apple BT keybd and mouse work well, in fact, I can type from the other end of the garden - just I can't see what I'm typing!
I bought my 3rd & last Mac Mini tonight for Euro 399 (£264!!!) as the blowout of the Rev.A 1.25GHz 40GB 256RAM 32 VRAM models. My main Mini really uses its 1GB ramstick when encoding MPG4 via the EyeTV200, but the sub £300 price makes the Mini phenomenal, unbeatable and so versatile!
I'm sure you'd be happy with the Rev.B with the BTO options until Rev.C comes out!
what's the native resolution of your Philips LCD? is it video protected path?

New Mac Mini and Apple Cinema Display

I have just upgraded my Mac (G5 PowerMac) to a new Mac Mini. I am still using my Apple Cinema display - but I cannot not play all the purchased movies that I have on iTunes now...????

Greg,
Are these movies HD? If they are, you might be having a problem with HDCP which is copy protection that won't let you view movies if all of your equipment is not HDCP compliant, which probably is your Cinema display. I also have a late 2012 Mac mini with an older Apple 20" Cinema display and cannot watch HD itunes movies. You will have to watch in standard definition. Of course you might have a different problem, but your question seemed similar with my situation. What is strange is that you were able to watch from your G5 Powermac. Maybe the power PC chip allowed viewing as opposed to intel chips, which I think intel created HDCP. Somebody on these boards probably has better answers then me ;-)
Rob

Crash with ATI Radeon X1900 XT and second HD display (DVI) ?

hi ! i have a realy tough one for you guys : since 3-4 days i've been getting this realy strange (and scary!) kernal panic screen / crashes / freeze with my macpro dual 2.66 with ati radeon X1900 xt.
the crashes keep coming while doing extensive work (video converting, renders) or just letting the macpro running doing nothing much all night long...
now this is what i found for now : if i disconect my 2nd display (samsung syncmaster 2493hm HD in DVI 1080p) it seem to be stable. when i reconnect it sometime it can run again with this 2nd display for a while but when i leave a render all night long the next morning it will be frozen, nothing on screen (all black).
after rebooting it get this crash report from the system :
Maccinachheeke-pabcapk cat0etiabies 0x00000000000000000000006:
6 ereerr--i oporgingngnkbeaachineck Maehik ne-a0h0h ck stat00t000000000 r0es0
reteattartPvvl Ili maaliceicdn mchk aiog eproMh
rekroi-MCpor reorrosg-:
porttMCrSTregt(i_MC 0xSTATUS(er40_S x20210(0x0nv0TalU00xx002in000iS10000002405)100l00U I0nva0M 0xS
IS(0x0A30:_M0U2(00ATU5S(2xx00200TA00000x00400000IAinv2li00lC
20IAA00200_inv0xid
0IA3: 3_d0000AT0)000000d)0000n00a00d000nA0v0l0d
I3S22_v4USi3SIA0411): 0400 0x0U0000020000 00100 00vl00
0 I0A3011CivAA32_SM_441SxTUTb0004100)000vb01001iA 00led 0I cva00 i e r cI:S(0xe0 1 ):(0 : 041e5)b x000b 800de:fix 4arrld
Mo MAA e8atr code inf 00: 0 0x00 St
00s00ode
spSccifsic codr
texr ccorre02sor:
0 8O4x0
r erder in orrmt n ded0000: 0x1rp0000Satus bitts:
b 0ts:4ssor PMroexce Chtsscorrupt, tconad:
e0x3re1cor,rtr epo:bl ed err: E0)roncirters0: 0
8ernc0ro,rrR2: 0xected error
CR3: 0x00e7a000, CR4: 0x000006e0
EAX: 0x24f9bed8, EBX: 0x1a6f198a, ECX: 0x1a6f198a, EDX: 0x004bc870
ESP: 0x24f9bebc, EBP: 0x24f9bf08, ESI: 0x00001e27, EDI: 0x035e1718
EFL: 0x00000006, EIP: 0x0019e9c0
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x439d58 : 0x128d0d (0x3cc65c 0x439d7c 0x131f95 0x0)
0x439d98 : 0x1a42cb (0x3d27fc 0x0 0x35e1718 0x12)
0x439f58 : 0x19c103 (0x439f70 0x0 0x0 0x0)
0x24f9bf08 : 0x135888 (0x1a6f164f 0x35e3d40 0x3f91084 0x2)
0x24f9bf58 : 0x1359c9 (0x13d8a2 0x0 0x0 0x19e23a)
0x24f9bf78 : 0x13da53 (0x13d8a2 0x0 0x0 0x0)
0x24f9bfc8 : 0x19b21c (0x0 0x0 0x19e0b5 0x4ebf4c0) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.11.1: Wed Oct 10 18:23:28 PDT 2007; root:xnu-792.25.20~1/RELEASE_I386
Model: MacPro1,1, BootROM MP11.005C.B04, 4 processors, Dual-Core Intel Xeon, 2.66 GHz, 2 GB
Graphics: ATI Radeon X1900 XT, ATY,RadeonX1900, PCIe, 512 MB
Memory Module: DIMM Riser A/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser A/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 1, 512 MB, DDR2 FB-DIMM, 667 MHz
Memory Module: DIMM Riser B/DIMM 2, 512 MB, DDR2 FB-DIMM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x87), Broadcom BCM43xx 1.0 (4.170.13.1)
Network Service: AirPort, AirPort, en2
PCI Card: ATY,RadeonX1900, Display, Slot-1
Serial ATA Device: ST3250820AS P, 232.89 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, Up to 480 Mb/sec, 500 mA
USB Device: Hub in Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 500 mA
USB Device: USB RECEIVER, Logitech, Up to 1.5 Mb/sec, 100 mA
USB Device: Apple Pro Keyboard, Mitsumi Electric, Up to 12 Mb/sec, 250 mA
FireWire Device: built-in_hub, unknown_value, Unknown
FireWire Device: GSA-5163D Super Multi DVD Rewriter, HL-DT-ST, Up to 400 Mb/sec
FireWire Device: My Book Device, WD, Up to 800 Mb/sec
here's my complete config if it can help :
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 2 GB
Bus Speed: 1.33 GHz
Boot ROM Version: MP11.005C.B04
SMC Version: 1.7f8
ATI Radeon X1900 XT:
Chipset Model: ATY,RadeonX1900
Type: Display
Bus: PCIe
Slot: Slot-1
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x7249
Revision ID: 0x0000
ROM Revision: 113-A52027-140
EFI Driver Version: 01.00.140
Displays:
SyncMaster:
Resolution: 1920 x 1200 @ 60 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Television: Yes
S/M 955SL:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Hardware Accelerated
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
anyone ever see this problem ? at 1st it seem to be related to my ATI card... but i'm no expert so if anyone can understand part of the crash log let me know ! thanx !!
also forget to say : did all the full apple hardware test + tech tool pro test (app that come with apple care) and nothing was wrong, all ok.
+
francis.t
montreal
Message was edited by: francis.t

Are you really still running 10.6.3? you will need 10.6.5+ so do that and make a clone.
ATI 5770 from Apple Store - like 1000s of others have done and in the comments section on the store page.

Power Mac G4 and 15" Studio Display variation on an old theme

I am trying to recondition a PM G4 tower and 15" display for resale. A number of years ago I corrupted the system attempting an upgrade, and the display has never worked ever since (power button works, but screen is black). Somewhere along the line, I managed to erase the G4 drive (via firewire connection to a MacBook). Now I am attempting to reinstall the original system software (in hopes it will restore the functionality of the display). I have the original installation disk as well as 5 system software restoration disks. My attempts to reinstall the system over the firewire connection have been unsuccessful. I can reboot the G4 from the installation disk in the CD drive, but without a working display, I have to do this blind.
Is there any way to restore the original system software without a display to guide me?

iBooks? any G4 iBooks?
Perhaps you could install that by setting the G4 into FireWire Target Disk mode and installing from an iBook.
An iBook might use a similar version of OS 9. A "Full Retail" OS 9 CD installs only the drivers needed for the Mac you are installing on, unless you probe into the optional Installs and select "Universal Install for any Mac".
A "Full Retail" Mac OS X earlier than 10.5 installs ALL the drivers for any Mac, and selects the proper subset at load time. Gray Mac-specific discs will not work because they do not contain all the drivers -- only those for the Mac listed on the face.
When selling, you are obligated (ethically and by anti-Fraud commerce statutes) to reveal any defects you know about to the Seller. It is common to sell a Mac with NO Hard drive, and it is common to sell a Mac of this era with no display, since many had 75 pound CRTs that cost much more to ship than they are worth.
Message was edited by: Grant Bennet-Alder

Intel Mac Mini and Sony Wega displays

I purchased one of the G4 based Minis for use in my media center. At that time I had quite a bit of difficulty getting it to work with my Sony KDF-60xs955 60" HDTV. I did eventually get it working and stable but the process, when written down for others in this forum post, is somewhat intimidating.
My parents really need a new machine for their daily use and I'm going to be donating that Mini to them. Before I replace it with a new intel Mini (yay Front Row!) I want to know whether it will autodetect my television or not. I have no desire to spend the 4-5 hours needed to hack it into working again, plus the hassle of getting it to work again any time I switch displays for a few hours. More importantly I don't feel like I should have to...The HDTV is automatically detected by a PowerBook and that works flawlessly.
One of the major reasons I pay higher prices to Apple is so that it just works. My new iMac? It just works. My old PowerBook? It just works. My old Mac Mini? Not so much... So, here I am hoping to get an answer out of these forums: To buy or not to buy that is the question, whether tis nobler to suffer the slings and arrows of outrageous non-support or to take my cash away from this sea of troubles and by opposing end them.
Thanks.
Mini G4 1.42/512/80/BT, AP | iMac intel 20" + 23" CinemaHD | PowerBook 17" Mac OS X (10.4.2)

Hi there,
I have downloaded the lastest Windows Media Player from Microsoft for Mac OS X, but it doesn't officially support the Intel Macs. It runs with wmv videos from my harddisk, for example, but I also can't play the amazon.com sound samples (I just tried). I guess it's because the Windows Media Player is running via Rosetta, maybe there is some problem there.
For the moment I could only suggest to use the Real-player sound samples as a work-around. Real player does work on the Intel Mac with these sound samples. Just that on my machine it does only download and I have to start it from the desktop instead of right inside of Safari. Maybe it's just a question of preferences, but it does work, at least.
Mac mini 1,66 GHz Intel Core Duo, 2 GB RAM Mac OS X (10.4.6) + PC (Win XP Pro) & iBook (Mac OS X 10.3.9)

2008 Mac Pro and Apple Cinema Display 27"

Is there some sort of adapter that would allow me to plug the new Apple Cinema Display 27" with a 2008 Mac Pro? Or what change would I have to make to be able to work this out?

Adrian - did you end up getting an adapter and using it? I purchased the Atlona DVI to Mini DisplayPort Converter (AT-DP200) to connect my 2008 MacbookPro (with GeForce 8600M GT) to the new 27 in. Cinema display, and though it works, it looks a bit fuzzy in terms of resolution. Having read the response here about making sure it is a DUAL link converter, I was going to try to return it for the AT-DP400.
Then I read another thread on here that seemed to indicate that the AT-DP400 would not work at all with the 2008 Macbook Pro.
http://discussions.apple.com/thread.jspa?threadID=2585380&tstart=0
So now I'm confused. Just wondering what your experience is, if you ended up with getting the display and converter.

RDC with Mac Laptop and Second Screen - Cannot move Mac Windows onto RDC Screen

The older version of RDC 2.1.1 works perfectly with an additional screen. With the new version 8.0.10, although you can launch and use RDC, you can, no longer, move a window over onto the second screen. So RDC works fine, but you do not have the flexibility
of using both screen while RDC is running. This is clearly a backward step from 2.1.1.

Hi,
Thank you for posting in Windows Server Forum.
There is one expected MAC behavior as on Mac only one app gets focus when you go full screen.
In addition, please share some more light with snapshot for your issue for further research.
Thanks for your understanding and support!
Regards.
Dharmesh Solanki
TechNet Community Support

Mac Pro and non apple displays

hello all.
I used to have a dell display (really cheap TN non ultrasharp) and i was not happy with it at all. when connected to my mac i would get visible diagonal rippling lines through the display especially when viewing dark colours. however this was fine when i used boot camp windows. many from the discussion suggested that it was because mac likes IPS panels where the cheap brands use TN. so i got me a 20 in apple cinema display and i love it!. after three years i would love to upgrade to bigger display thats flexible, (HDCP and more connections) and not break my bank. at the moment im looking at dell again (sigh) the new ultra-sharp u2311h (http://accessories.us.dell.com/sna/products/Displays/productdetail.aspx?c=us&l=e n&cs=19&sku=320-9270) this panel features IPS panel similar to previous ultra sharp models that had exact panels as the apple cinema displays. i would love to hear some opinions and tips.
and i would especially love to hear form ultra sharp users and their thoughts / experience. please please let me know.

When I said that NEC displays were much better than Dell's I was referring to the former's Multisync "LCD" range, which use different panels to their "EA" models.
"EA" models are classified as "office monitors" by NEC, whereas "LCD" models are "high end", and consequently are more expensive.
I have no idea how the NEC Multisync EA231WMi compares against the Dell Ultrasharp U2311H, but there is a lot more to a display than sharing the same panel. Although their displays are built around the same panel, NEC and Dell would be using different technology inside, and that is where the former has the advantage, because Dell does not "manufacture" high end/professional monitors.
Although Dell Ultrasharp monitors have received several good reviews, particularly with regard to value for money, they are not in the same league as NEC, EIZO, or LaCie, particularly where colour accuracy is paramount, and that is one of the reasons why they are usually much cheaper.
Some time before I purchased my NEC 30" display, Macworld UK published a review covering several 24" to 27" displays, including models from NEC, EIZO, LaCie, Dell and Samsung. The 26" LaCie model used the same H-IPS panel as the 26"NEC, but it was the NEC which walked away with the 5 star "Best Buy" award. The Dell 27" was judged to be value for money, but fell down on colour accuracy.
For further endorsement of the quality of NEC's "LCD" range see:
http://www.pcpro.co.uk/reviews/monitors/242010/nec-multisync-lcd3090wqxi
The point I am trying to make is that NEC have the expertise to produce the above exceptional quality display, whereas Dell do not. Doubtless, some of that expertise filters down to models in other NEC ranges. The panel might be the same, but the technology inside the display will most certainly be different between the two companies.
You pay your money, and you take your choice!
Regards,
Bill

Mac G5 and second 23" display

Similar Messages

Maybe you are looking for