Mac G5 won't boot after updating

I am having issues with a PPC Mac G5 not booting after trying to install updates. The computer is my sons PPC G5. It had not been updated in a while so I selected the "software update" which appeared to progress succefully. I believe that the s/w level was a version 10.5.x. It never came back from the reboot. I'm more familiar with the older Macs (v 7/8/9) so I'm having to dig a bit here. I tried to start in safe mode and even in single user mode but no help.
The symptoms are that the computer plays the startup chime and then eventually shows an icon of a folder with the opposing faces in it. THat goes away leaving a grey screen and the fan goes to high setting. No change from there.
I have also started it in the mode to see which disks are available and the HD icon appears but has a circle with an X in it at the lower side of the icon. It almost seams like the OS got corrupted.
Here's my real problem. Since it was my sons computer and came with the OS pre-loaded, I do not have the original software or a boot disk or other bootable tools. Any thoughts would be appreciated. Undo button or restore feature?
Thanks in advance for the knowledge and help.

An install disc would really help. Besides eBay & such, You have to call Apple & ask for a Product Specialist to get it, if they still have it.
Other than that, your best bet is DiskWarrior, you need the CD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius 2…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro 4…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
BTW, you might enjoy this DiskWarrior review/recommendation...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801

Similar Messages

Mac Mini won't boot after update

I have a Mac Mini that won't boot after the most recent software update. Since the Mini has only a bluetooth keyboard and mouse, a number of the usual options (hold down shift, etc.) won't work. I've tried a reset, also no luck. At the moment, I can't locate my Tiger install CD either.
When holding the power button on during boot, I get a series of flashes from the status light on the front (a set of very rapid flashes, followed by a slower set, followed by a slow set) but no startup chime, or fan, or video. My display and power source are both known-good (work fine with my Powerbook)
Any suggestions, other than buying a hardwired keyboard/mouse?

Welcome to Apple Discussions!
The 'newer version of OS X" error occurs because the installer on the DVD you have booted to has by default been set to update the version of MacOS on the hard drive, which of course it can't do because the version of MacOS it is installing is newer. The only way to install in this situation is to select a different option. However, that isn't what you want to do at this point, because as it says, you'll loose your data if you do an 'erase and install'.
Instead, you should see menus at the top of the screen when it's booted to that install disk. Click the Utilities menu, select Disk Utility, and then click the top entry for the internal hard drive on the left. Once done, click on the 'Repair Disk' button (not Repair Permissions). This will test the drive to make sure it's OK. If it reports errors, and then reports 'error or exit' with the drive not repaired, you will either need a 3rd party application such as Alsoft's Disk Warrior, or to perform an erase and install (which of course you don't want to do at this point because your data is not backed up).
If the Repair Disk process completes with no errors, next select Repair Permissions, and let that process complete, then reboot the system as normal to see if you can now access the drive.

Mac won't boot after updating to OSX 10.6.4

I am on my 3rd Mac that won't boot after updating to OSX 10.6.4. One MacBook Pro and two iMacs. I fixed one but the last two are getting the better of me. HD is not fried. Have tried every keyboard shortcut on startup, Disk Warrior via. Target Disk, repairing permissions in single user mode. The machines will not boot off of a CD or DVD and it will not boot up in safe mode. Something in the startup files is preventing startup. I am suspecting Sophos antivirus. I tried to uninstall it and trash it but I think it's still blocking something. Any help would be appreciated.

Got it! Not sure if removing Sophos had anything to do with it but here's what I did.
1) boot dead machine in Target Disk Mode (iMac)
2) boot good machine off Snow Leopard disk (MacBook)
3) install OS to dead machine- I found this next part very curious. When the install was complete the MacBook restarted as the iMac.
4) ran software updates
5) shut down MacBook then shut down iMac
6) rebooted iMac- all was good
I actually did this twice because a co-worker had the exact same problem on her MacBook Pro. Got both fixed today.
Thanks everyone for your help!

Mac OS won't boot after 2007-009 1.1 update

Hi all
Fairly major problem here. Mac OS X won't boot after the 2007-009 1.1 security update.
What I am left with is the mac boot screen, and not a lot happening. No rotating loading animation.
Any help would be really appreciated.
Thanks

I have been booting up for...2.45 hours now
Good grief!
Here are a few hints about what you should have done:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692

My Mac Pro won't boot after installing the latest update

Im running the latest OSX on my mac and recenty did a small updated that i believe contain a few security thing and bug fixs but when restarting the machine after the update it would not boot again after the apple logo has appeard apple script is displayed on the screen contain what i think is boot script failing to run. I have been able to boot the system in safe mode. does anyone have and solution for this as i realy don't want to reinstall the OS
Thanks

The most common cause for "Won't boot after software Update" is Directory Damage that existed before the Update, but was made worse by adding files during the Update.
The most common cure for that Directory Damage problem is to boot in Safe Mode, which takes five minutes to repair the disk, then comes up demanding your username and password, even if you normally auto-login.
Rarely, third-party add-ons are made obsolete by an update. In this case, booting in Safe Mode (with few Apple extensions and NO third-party extensions loaded) works fine, even if normal mode does not work.
Have you tried normal mode again after your Safe Boot?

Mac mini won't boot after RAM upgrade.

Tried installing new RAM in my Mac Mini, 512MB stock to 2GB of Crucial. Followed the directions to a T, grounded myself the whole time.
Things I've tried so far:
1. Resetting the PRAM, no luck.
2. Holding option at start-up, shows no icon.
3. Holding shift, no luck.
4. Holding X, nothing.
How do I get it to accept a CD if it won't boot?

Welcome to Apple Discussions!
You clearly have a problem, but you don't describe exactly what that is other than that your mini won't boot after the upgrade. What happens when it starts up? Does it attempt to start and hang up on the grey or blue screens, or does it start beeping at you almost immediately after you try and start it up, and also flash the power light?
If the former, then you may have dislodged a connector while working inside the system, in which case opening it up and checking that everything is firmly connected would be the first thing to do. If the latter, then the beeping/light flashing is the system telling you it has failed the power-on self test and the pattern of beeps/lights indicates why. In your case likely the system can't find workable memory. In that instance, opening the system and ensuring that the RAM is firmly and fully seated would be a good step, and if the mini continues to fail, then replacing the new RAM with the original to test that the system will then start.
It is not likely that anything had damaged your MacOS install in the process of upgrading, thus normally no reason to need to boot to CD as a result of a RAM issue.

Mac Mini won't boot after failed XP installation

Recently upgrade HD to 320GB 7200 rpm and 3GB ram. Running 10.5.8 fine.
I tried to install Windows XP through Boot Camp, but wasn't successful, I terminated the installation. Then Mac Mini won't boot up. When powered on, you heard the chime, then grey screen showed and stayed. Tried starting with "C" (boot from CD), "OPT" (boot option), "T" (target), and reset PRAM. None of them worked.
What should I try next?
Thanks
Message was edited by: Yijian Cao

If you install XP on Bootcamp, your startup disc will be changed to XP Windows partitioned you did. To restore your startup disc back to Mac OS, make sure your Mac is turned off. 1. Plug the power back and press the power button ON. When you hear the power On sound, press and hold the ALT key on your keyboard until you see the hardrives. 2. Select the HD that says MAc OS, then your mac will boot back to Mac OS.
Let me know if you have more problems, maybe I can help.
Abel

Mac mini won't boot after latest update Maverick

My Mac mini running Maverick after an automatic update won't boot. " no bootable device -- insert boot disk and press any key"
What option do I have here?

Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless.

Mac Mini won't boot after 10.6.6 / Airport update

I just reinstalled 10.6.3 on a unibody Mac Mini, updated to 10.6.6 - and it booted fine. I ran another software update, and it suggested two more updates - which I believe was an Airport Utility update and a Java update. Now the Mac Mini fails to boot, stopping at the Apple logo.
The last lines of verbose startup goes like this:
Airport: Link Down on en1. Reason 8 (Disassociated because station leaving).
Aut result for: (MAC address) succeded
AirPort: Link Up on en1
AirPort: RSN handshake complete on en1
AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
Suggestions?
H

I experienced a similar problem today after a recent upgrade to 10.6.6. I ran Tech Tool Pro 5 on the machine, which reported everything as just dandy after about 6 hours of testing, but it still wouldn't boot. Next, I tried booting in Verbose mode, which revealed that my iMac was hanging on:
AppleBCM5701Ethernet: 0 0 setFixedSpeed - logic error, speed any?
I used Safe Single User mode (turn on power, then immediately press and hold Shift-Command-S until text starts appearing) to boot to a command line. Single User mode provides instructions on how to mount the file system read/write. I executed the `fsck` command as instructed, and after a few minutes it reported that it had made changes to the file system. At that point, I skipped the `mount` command and went directly to `exit` to continue the boot process, which completed. I turned AirPort back on (I had it turned off), then rebooted normally without any trouble.

Mac Pro won't boot after forced shutdown

Hi all, hopefully someone will be able to help with this.
This is a Mac Pro (don't have the exact spec right now, but will have later, I think it's a dual), which is used to run ProTools. It has no internet or network connections.
It's running OS X 10.5.8 and has been for quite a while with no problems. Nothing new has been installed recently (hardware or software).
The other night it was playing back a ProTools session and recording a mix of the result when it started behaving strangely. When ProTools is recording, it creates a waveform display of the recording as it goes, and this suddenly started being corrupted by what appeared to be bits of a photograph or video image. The owner tried to hit "Stop", but nothing would work. Mouse still moved, but no button response, keyboard shortcuts ineffective, and Force Quit did nothing, so in the end he had to kill it by holding down the power button.
Since then it won't boot normally, though it will boot into Safe Mode with no problem.
On a "normal" startup, it powers up, goes through the grey screen/Apple logo/spinning thing stage on the left monitor, then that one goes blue, then both monitors go blue for a few seconds and finally both screens go black, with a mouse pointer in the top left of the left screen. You can move the mouse all over both screens (though if you wait a few seconds it leaves a copy of the pointer in the top left), but that's as far as it gets. Disk activity continues for a while (maybe a minute or so) after the screens go to black, and the spinning rainbow thing comes and goes, but it then seems to give up.
Here's what I've tried so far:
Boot into Safe Mode - no problem
Verify disk using Disk Utility - no problem
Repair permissions - loads of screwed up stuff, all with "permission should be ?-----" . Repair didn't work. Finally fixed these by running the 10.5.8 combo updater twice (known issue with this updater), then repairing again. Permissions now come up clean.
Cleared all caches etc. using Cocktail - slight improvement. Before this it was sticking on the one blue screen stage.
Got rid of a few corrupt preference files using Cocktail (all last modified years ago) - no difference.
Reset PRAM and MBC - no difference
Tried booting with everything disconnected except one screen, keyboard and mouse - no difference.
I'm going over later to see if reseating cards/removing memory etc. will make any difference, and to see if it will fire up fom it's original 10.4.? CD.
Beyond that, I'm kind of out of ideas, so I figured I'd see if anyone else had any!
Below is (what I think!) is the relevant bit of the log file, showing a failed boot, forced power off and reboot intoSafe Mode.
Any clues to corrupt files etc. in there?
Brian
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext is already loaded
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
Jan 17 19:19:07 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext is already loaded
Jan 17 19:19:30 localhost kernel[0]: npvhash=4095
Jan 17 19:19:28 localhost com.apple.launchctl.System[2]: BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
Jan 17 19:19:28 localhost com.apple.launchctl.System[2]: BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
Jan 17 19:19:29 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jan 17 19:19:29 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jan 17 19:19:29 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jan 17 19:19:29 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jan 17 19:19:30 localhost kextd[10]: 439 cached, 0 uncached personalities to catalog
Jan 17 19:19:30 localhost kernel[0]: hi mem tramps at 0xffe00000
Jan 17 19:19:30 localhost kernel[0]: PAE enabled
Jan 17 19:19:30 localhost kernel[0]: 64 bit mode enabled
Jan 17 19:19:30 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jan 17 19:19:30 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 17 19:19:30 localhost kernel[0]: vm_page_bootstrap: 714269 free pages and 72163 wired pages
Jan 17 19:19:30 localhost kernel[0]: mig_table_max_displ = 79
Jan 17 19:19:30 localhost kernel[0]: Error: Couldn't read XML property list for multikext archive entry 115.
Jan 17 19:19:30 localhost kernel[0]: XML parse error: OSUnserializeXML: syntax error near line 1
Jan 17 19:19:30 localhost kernel[0]: .
Jan 17 19:19:30 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:30 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=6 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=7 Enabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jan 17 19:19:30 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jan 17 19:19:30 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jan 17 19:19:30 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jan 17 19:19:30 localhost kernel[0]: calling mpo_policy_init for mb
Jan 17 19:19:30 localhost kernel[0]: Seatbelt MACF policy initialized
Jan 17 19:19:30 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jan 17 19:19:30 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 17 19:19:31 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 17 19:19:31 localhost kernel[0]: MAC Framework successfully initialized
Jan 17 19:19:31 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
Jan 17 19:19:31 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:31 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:19:31 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.AppleIntelCPUPowerManagement: Enabling legacy HPET check
Jan 17 19:19:31 localhost kernel[0]: mbinit: done
Jan 17 19:19:31 localhost kernel[0]: Security auditing service present
Jan 17 19:19:31 localhost kernel[0]: BSM auditing present
Jan 17 19:19:31 localhost kernel[0]: rooting via boot-uuid from /chosen: A3A529FC-62F4-3CBC-91C6-E6C6DC1F954B
Jan 17 19:19:31 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 17 19:19:31 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe92f662; max speed s800.
Jan 17 19:19:31 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3250820AS P Media/IOGUIDPartitionScheme/Customer@2
Jan 17 19:19:31 localhost kernel[0]: BSD root: disk0s2, major 14, minor 5
Jan 17 19:19:31 localhost kernel[0]: Jettisoning kernel linker.
Jan 17 19:19:31 localhost kernel[0]: Resetting IOCatalogue.
Jan 17 19:19:31 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:19:31 localhost kernel[0]: Matching service count = 2
Jan 17 19:19:31 localhost kernel[0]: Matching service count = 3
Jan 17 19:19:31: --- last message repeated 4 times ---
Jan 17 19:19:31 localhost kernel[0]: Matching service count = 4
Jan 17 19:19:31 localhost kernel[0]: MacPro1,1: stalling for module
Jan 17 19:19:31 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jan 17 19:19:32 localhost kernel[0]: Matching service count = 1
Jan 17 19:19:32 localhost kernel[0]: AppleTyMCEDriver::probe(MacPro1,1)
Jan 17 19:19:32 localhost kernel[0]: AppleTyMCEDriver::probe fails
Jan 17 19:19:32 localhost kernel[0]: Previous Shutdown Cause: 3
Jan 17 19:19:33 localhost kernel[0]: Probing MOTU Driver
Jan 17 19:19:33 localhost kernel[0]: IOKit version is "Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386"
Jan 17 19:19:33 localhost kernel[0]: uhcim Not using bug fix
Jan 17 19:19:33 localhost kernel[0]: GetDevInfoForSubclass interfacesubclass 0 forUHCI 0
Jan 17 19:19:34 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jan 17 19:19:34 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:19:34: --- last message repeated 3 times ---
Jan 17 19:19:34 localhost kernel[0]: Matching service count = 0
Jan 17 19:19:35 localhost bootlog[65]: BOOT_TIME: 1326824366 0
Jan 17 19:19:36 localhost rpc.statd[47]: statd.notify - no notifications needed
Jan 17 19:19:37 localhost fseventsd[56]: bumping event counter to: 0x28c7 (current 0x0) from log file '0000000000000665'
Jan 17 19:19:39 localhost DirectoryService[61]: Launched version 5.7 (v514.25)
Jan 17 19:19:42 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[52]: Login Window Application Started -- Threaded auth
Jan 17 19:19:44 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9c
Jan 17 19:19:44 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9d
Jan 17 19:19:45 localhost com.paceap.pacesupport[68]: kextload: /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns/PACESupportL eopard.kext loaded successfully
Jan 17 19:19:49 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() --
Jan 17 19:19:49 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[51]: starting
Jan 17 19:19:50 localhost /usr/sbin/ocspd[94]: starting
Jan 17 19:19:52 localhost kextd[10]: writing kernel link data to /var/run/mach.sym
Jan 17 19:19:54 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en1 called by enableHardware() --
Jan 17 19:19:54 *****-****-computer configd[63]: setting hostname to "*****-****-computer.local"
Jan 17 19:19:56 *****-****-computer org.ntp.ntpd[42]: Error : nodename nor servname provided, or not known
Jan 17 19:19:56 *****-****-computer ntpdate[106]: can't find host time.euro.apple.com
Jan 17 19:19:56 *****-****-computer ntpdate[106]: no servers can be used, exiting
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: PACESupport - launchd already started us
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
Jan 17 19:19:56 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiIO.kext is already loaded
Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
Jan 17 19:19:57 *****-****-computer com.apple.SystemStarter[45]: kextload: extension /System/Library/Extensions/DigiDal.kext is already loaded
Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
Jan 17 19:19:59 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:19:59 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:01 *****-****-computer kernel[0]: NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0x2 = Fifo: SW Method Error
Jan 17 19:20:01 *****-****-computer kernel[0]: 0000000b
Jan 17 19:20:09 *****-****-computer loginwindow[52]: Login Window Started Security Agent
Jan 17 19:20:15 *****-****-computer com.apple.launchd[1] ([0x0-0x5005].com.dantz.RetroRunSL[123]): Stray process with PGID equal to this dead job: PID 125 PPID 1 RetroRunSL
Jan 17 19:23:49 *****-****-computer com.apple.firmwaresyncd[57]: kextload: /System/Library/Extensions/msdosfs.kext loaded successfully
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** /dev/rdisk1s2
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Root file system
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Journaled HFS Plus volume.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Extents Overflow file.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Catalog file.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking multi-linked files.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Catalog hierarchy.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking Extended Attributes file.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking volume bitmap.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** Checking volume information.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ** The volume Macintosh HD appears to be OK.
Jan 17 19:28:18 localhost com.apple.launchctl.System[2]: ***** FILE SYSTEM WAS MODIFIED *****
Jan 17 19:28:20 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jan 17 19:28:20 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jan 17 19:28:20 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jan 17 19:28:20 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Jan 17 19:28:21 localhost kernel[0]: npvhash=4095
Jan 17 19:28:20 localhost kextd[9]: safe boot detected
Jan 17 19:28:21 localhost kernel[0]: hi mem tramps at 0xffe00000
Jan 17 19:28:20 localhost kextd[9]: safe boot; invalidating extensions caches
Jan 17 19:28:21 localhost kernel[0]: PAE enabled
Jan 17 19:28:21 localhost kernel[0]: 64 bit mode enabled
Jan 17 19:28:21 localhost kernel[0]: Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT 2009; root:xnu-1228.15.4~1/RELEASE_I386
Jan 17 19:28:21 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 17 19:28:21 localhost kernel[0]: vm_page_bootstrap: 508650 free pages and 277782 wired pages
Jan 17 19:28:21 localhost kernel[0]: mig_table_max_displ = 79
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=2 LocalApicId=6 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=3 LocalApicId=7 Enabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=4 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=5 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=6 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: AppleACPICPU: ProcessorApicId=7 LocalApicId=0 Disabled
Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jan 17 19:28:21 localhost kernel[0]: calling mpo_policy_init for mb
Jan 17 19:28:21 localhost kernel[0]: Seatbelt MACF policy initialized
Jan 17 19:28:21 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jan 17 19:28:21 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jan 17 19:28:21 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jan 17 19:28:21 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jan 17 19:28:21 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 17 19:28:21 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 17 19:28:21 localhost kernel[0]: MAC Framework successfully initialized
Jan 17 19:28:21 localhost kernel[0]: using 15728 buffer headers and 4096 cluster IO buffer headers
Jan 17 19:28:21 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jan 17 19:28:21 localhost kernel[0]: Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
Jan 17 19:28:21: --- last message repeated 1 time ---
Jan 17 19:28:21 localhost kernel[0]: AppleIntelCPUPowerManagement: Enabling legacy HPET check
Jan 17 19:28:21 localhost kernel[0]: mbinit: done
Jan 17 19:28:21 localhost kernel[0]: Security auditing service present
Jan 17 19:28:21 localhost kernel[0]: BSM auditing present
Jan 17 19:28:21 localhost kernel[0]: rooting via boot-uuid from /chosen: A3A529FC-62F4-3CBC-91C6-E6C6DC1F954B
Jan 17 19:28:21 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 17 19:28:21 localhost kernel[0]: FireWire (OHCI) TI ID 8025 built-in now active, GUID 0019e3fffe92f662; max speed s800.
Jan 17 19:28:21 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0 @0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDri ver/ST3250820AS P Media/IOGUIDPartitionScheme/Customer@2
Jan 17 19:28:21 localhost kernel[0]: BSD root: disk1s2, major 14, minor 5
Jan 17 19:28:21 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 23181312 to: 122368 (joffset 0x746000)
Jan 17 19:28:21 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jan 17 19:28:21 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jan 17 19:28:21 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories
Jan 17 19:28:21 localhost kernel[0]: Jettisoning kernel linker.
Jan 17 19:28:26 localhost bootlog[36]: BOOT_TIME: 1326824767 0
Jan 17 19:28:26 localhost fseventsd[27]: event logs in /.fseventsd out of sync with volume. destroying old logs. (330 139 558)
Jan 17 19:28:27 localhost rpc.statd[18]: statd.notify - no notifications needed
Jan 17 19:28:27 localhost fseventsd[27]: log dir: /.fseventsd getting new uuid: 07B57D5F-5A7E-483F-8FBE-40E8DF7E6E23
Jan 17 19:28:32 localhost DirectoryService[32]: Launched version 5.7 (v514.25)
Jan 17 19:28:32 localhost DirectoryService[32]: Improper shutdown detected
Jan 17 19:28:38 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9c
Jan 17 19:28:38 localhost kernel[0]: AppleIntel8254XEthernet: Ethernet address 00:17:f2:09:62:9d
Jan 17 19:28:43 localhost kernel[0]: Resetting IOCatalogue.
Jan 17 19:28:43 localhost kextd[9]: 0 cached, 291 uncached personalities to catalog
Jan 17 19:28:44 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:28:44 localhost kernel[0]: Matching service count = 2
Jan 17 19:28:45 localhost kernel[0]: Previous Shutdown Cause: 3
Jan 17 19:28:45 localhost mDNSResponder mDNSResponder-176.3 (Jun 17 2009 18:57:49)[22]: starting
Jan 17 19:28:46 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[23]: Login Window Application Started -- Threaded auth
Jan 17 19:28:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Jan 17 19:28:50 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:28:50 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en0 called by enableHardware() --
Jan 17 19:28:52 localhost kernel[0]: PXS1: family specific matching fails
Jan 17 19:28:52 localhost kernel[0]: Matching service count = 0
Jan 17 19:28:54 localhost kernel[0]: Ethernet [Intel8254X]: Link down on en1 called by enableHardware() --
Jan 17 19:28:54 *****-****-computer configd[34]: setting hostname to "*****-****-computer.local"
Jan 17 19:28:56 *****-****-computer org.ntp.ntpd[13]: Error : nodename nor servname provided, or not known
Jan 17 19:28:56 *****-****-computer ntpdate[68]: can't find host time.euro.apple.com
Jan 17 19:28:56 *****-****-computer ntpdate[68]: no servers can be used, exiting
Jan 17 19:28:56 *****-****-computer com.apple.ATSServer[67]: FODBCheck: New annex file created
Jan 17 19:28:57 *****-****-computer /usr/sbin/ocspd[73]: starting
Jan 17 19:29:01 *****-****-computer kextd[9]: writing kernel link data to /var/run/mach.sym
Jan 17 19:29:04 *****-****-computer loginwindow[23]: Login Window Started Security Agent
Jan 17 19:29:05 *****-****-computer fseventsd[27]: event logs in /Volumes/DATA DRIVE/.fseventsd out of sync with volume. destroying old logs. (63 0 598)
Jan 17 19:29:05 *****-****-computer fseventsd[27]: log dir: /Volumes/DATA DRIVE/.fseventsd getting new uuid: 0E7FBB62-F55F-413D-970B-FB402543BF2D
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: PACESupport - launchd already started us
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiIO.kext appears to be loadable
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiIO.kext
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: /System/Library/Extensions/DigiIO.kext loaded successfully
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: sending personalities to kernel:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOStorageFamily.kext:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOFDiskPartitionScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOMediaBSDClient
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOGUIDPartitionScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOAppleLabelScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOBlockStorageDriver
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOApplePartitionScheme
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-Name
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-i386
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-PCI
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/DigiIO.kext:
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload:         DigiIO
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: sending 10 personalities to the kernel
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: matching started for /System/Library/Extensions/DigiIO.kext
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: extension /System/Library/Extensions/DigiDal.kext appears to be loadable
Jan 17 19:29:06 *****-****-computer com.apple.SystemStarter[16]: kextload: loading extension /System/Library/Extensions/DigiDal.kext
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: /System/Library/Extensions/DigiDal.kext loaded successfully
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: sending personalities to kernel:
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/IOPCIFamily.kext:
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-Name
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-i386
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         IOPCI2PCIBridge-PCI
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:     from extension /System/Library/Extensions/DigiDal.kext:
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIPLXDevice
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinRev2Farm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinFarm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinEngine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceHiNTHB2
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceDEC21154
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIFarm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDevicePericom8154
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         DigidesignGeneral
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIFarm
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinRev2Engine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIEngine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDevicePLXPCIExpress
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         MotorolaPresto
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIPLXDevice
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceDEC21154BE
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinPCIBridgeDeviceHiNTHB4
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload:         GershwinIIIEngine
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: sending 21 personalities to the kernel
Jan 17 19:29:07 *****-****-computer com.apple.SystemStarter[16]: kextload: matching started for /System/Library/Extensions/DigiDal.kext
Jan 17 19:29:11 *****-****-computer com.apple.launchd[1] ([0x0-0x4004].com.dantz.RetroRunSL[83]): Stray process with PGID equal to this dead job: PID 95 PPID 1 RetroRunSL
Jan 17 19:29:37 *****-****-computer com.apple.dyld[10]: update_dyld_shared_cache[10] regenerated cache for arch=i386
Jan 17 19:31:09 *****-****-computer authorizationhost[82]: MechanismInvoke 0x1d2de70 retainCount 2
Jan 17 19:31:09 *****-****-computer SecurityAgent[92]: MechanismInvoke 0x5b31950 retainCount 1
Jan 17 19:31:09 *****-****-computer SecurityAgent[92]: NSSecureTextFieldCell detected a field editor ((null)) that is not a NSTextView subclass designed to work with the cell. Ignoring...
Jan 17 19:31:10 *****-****-computer SecurityAgent[92]: MechanismDestroy 0x5b31950 retainCount 1
Jan 17 19:31:10 *****-****-computer authorizationhost[82]: MechanismDestroy 0x1d2de70 retainCount 2
Jan 17 19:31:10 *****-****-computer loginwindow[23]: Login Window - Returned from Security Agent
Jan 17 19:31:10 *****-****-computer loginwindow[23]: USER_PROCESS: 23 console
Jan 17 19:31:10 *****-****-computer com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[79]): Exited: Terminated
Jan 17 19:31:10 *****-****-computer com.apple.launchctl.Aqua[110]: launchctl: Please convert the following to launchd: /etc/mach_init_per_user.d/RemoteUI.plist
Jan 17 19:31:10 *****-****-computer com.apple.launchd[108] (org.x.startx): Unknown key for boolean: EnableTransactions
Jan 17 19:31:10 *****-****-computer /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer[118]: (-3230) Cannot use ATS Persistent Store - switching to old FODB cache code
Jan 17 19:31:13 *****-****-computer /System/Library/CoreServices/coreservicesd[43]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(***** ***'s Public Folder) returned -14135
Jan 17 19:31:18 *****-****-computer /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 22]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Jan 17 19:31:18 *****-****-computer /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 22]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Jan 17 19:32:21 *****-****-computer Cocktail[129]: Cocktail 4.7 launched.
Jan 17 19:32:24 *****-****-computer com.apple.FolderActions.enabled[141]: launchctl: Error unloading: com.apple.FolderActions.folders
Jan 17 19:32:32 *****-****-computer authexec[146]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer Cocktail[129]: ***** *** authenticated.
Jan 17 19:32:32 *****-****-computer authexec[149]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[151]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[153]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[155]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[157]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[159]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[161]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[163]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[165]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[167]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[169]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[171]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[173]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[175]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[177]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:32 *****-****-computer authexec[179]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:38 *****-****-computer defaults[184]: \nThe domain/default pair of (com.apple.spotlight, DictionaryLookupEnabled) does not exist
Jan 17 19:32:38 *****-****-computer defaults[185]: \nThe domain/default pair of (com.apple.spotlight, CalculationEnabled) does not exist
Jan 17 19:32:38 *****-****-computer defaults[186]: \nThe domain/default pair of (com.apple.systempreferences, TMShowUnsupportedNetworkVolumes) does not exist
Jan 17 19:32:38 *****-****-computer authexec[188]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:38 *****-****-computer authexec[190]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:38 *****-****-computer defaults[190]: \nThe domain/default pair of (/System/Library/LaunchDaemons/com.apple.backupd-attach, Disabled) does not exist
Jan 17 19:32:38 *****-****-computer defaults[191]: \nThe domain/default pair of (com.apple.TimeMachine, DoNotOfferNewDisksForBackup) does not exist
Jan 17 19:32:38 *****-****-computer defaults[192]: \nThe domain/default pair of (com.apple.finder, _FXShowBackgroundAnimation) does not exist
Jan 17 19:32:38 *****-****-computer authexec[194]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:39 *****-****-computer authexec[204]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:39 *****-****-computer defaults[204]: \nThe domain/default pair of (com.apple.loginwindow, StartupDelay) does not exist
Jan 17 19:32:39 *****-****-computer authexec[206]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:39 *****-****-computer defaults[206]: \nThe domain/default pair of (com.apple.loginwindow, Kiosk) does not exist
Jan 17 19:32:42 *****-****-computer defaults[207]: \nThe domain/default pair of (com.apple.desktopservices, DSDontWriteNetworkStores) does not exist
Jan 17 19:32:47 *****-****-computer authexec[213]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:32:48 *****-****-computer authexec[215]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:44:05 *****-****-computer Cocktail[129]: System log (/private/var/log/system.log) has been saved to /Users/********/Library/Logs/System LOg 2.log.
Jan 17 19:44:45 *****-****-computer fseventsd[27]: log dir: /Volumes/NO NAME/.fseventsd getting new uuid: 2DADE658-7648-47A4-A16F-8B77B56B575C
Jan 17 19:46:33 *****-****-computer Cocktail[246]: Cocktail 4.7 launched.
Jan 17 19:46:34 *****-****-computer [0x0-0x1b01b].com.apple.systemevents[254]: com.apple.FolderActions.enabled: Already loaded
Jan 17 19:46:36 *****-****-computer authexec[257]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer Cocktail[246]: ***** *** authenticated.
Jan 17 19:46:36 *****-****-computer authexec[260]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[262]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[264]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[266]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[268]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[270]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:36 *****-****-computer authexec[272]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[274]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[276]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[278]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[280]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[282]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[284]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[286]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[288]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:37 *****-****-computer authexec[290]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:39 *****-****-computer defaults[292]: \nThe domain/default pair of (com.apple.desktopservices, DSDontWriteNetworkStores) does not exist
Jan 17 19:46:44 *****-****-computer authexec[298]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid
Jan 17 19:46:44 *****-****-computer authexec[300]: executing /System/Library/ScriptingAdditions/StandardAdditions.osax/Contents/MacOS/uid

Hi,
Yes, I did resolve it - it was the graphics card. Changed that, updated OS X and it was done.
I can't now remember exactly which card I used, and I'm away at the moment so I can't get to the infomation, but I do remember that it was a full length card with a large heatsink, and was a bit of a pig to squeeze into the chassis!
Had to buy an adaptor for the second monitor connection, but that didn't cause any hassle. I got the card and cable from the local Apple Store.
It also theoretically needed a later version of OS X than was already there, but since it allowed me to boot off the CD, that didn't matter (and it worked with the old one anyway, as it turned out).
Oh, and also of course, although it's a bog standard PC card, you have to pay way over the odds for it because it has to have different PROMS for a Mac. (Thank you Apple.) Just part of the price we all have to pay for using Macs.
I seem to remember that there was a certain amount of dancing involved in upgrading the OS afterwards (might have had to do one step twice), but nothing that unusual.
Hope this helps,
All the best,
Brian

Imac won't boot after update

hi guys i am new to macs I bought this for my daughter and tried to update.The update said to hold the program button and push power,well now she won't boot up just a grey sreen and what looks like a file with a blinking question mark and a face..
I have a imac g3 400mhz with 256mb ram
osx and 9.2 i belive any help appreciated

The flashing folder icon is your iMac's way of saying, "where is my OS? I can't find an OS!" If this appears briefly and goes away, it's usually because the PRAM was reset recently. The 4.1.9 firmware does reset your PRAM in the process--but only if successful in its task. To fix this temporary hiccup, open the Startup Disk control panel and select the hard drive, then click Restart.
If this icon continues to flash, there are some steps you can try.
1. Reset the PRAM via Command (Apple)Option+PR at startup. Hold the keys down until the Mac chimes thrice. If your Mac starts normally after the third chime, end here.
2. Reinitialize the firmware. Enter Open Firmware mode (CommandOption+OF) and issue the following, pressing Return after each command:
reset-nvram
set-defaults
reset-all
If successful, the Mac should reboot itself. Stop here if this solves the problem.
3. If you have the iMac restore disc, or a disc with OS 9.1-9.2.1, boot it and run Disk First Aid from the Utilities folder to repair file structure errors. If you have DiskWarrior or TechTool Pro Classic, you will be able to do more thorough repairs.
4. If all of the above fail, you can reinstall OS 9 if you still need to do the firmware upgrades, but you should reinitialize the hard drive with Drive Setup if you also want a clean install. Drive Setup can be found in the CD's Utilities folder.
Nate

Macbook pro won't boot after update to 10.6.8

Hi everyone,
Yesterday I bought an used macbook pro (15 inch early 2008). When looking at it, it was in good shape and the previous owner just did a fresh install of snow leopard. I took it home and whas happy with it. In the first two hours of using it, everything was fine. After installing the update to 10.6.8 my macbook needed to be shut down.. After shutting down it started up again but the screen stayed black. I had no idea why. So I rebooted it by pressing the power button. The same problem remained, it seemed to start up (I could hear the harddrive and fan) but it didn't boot into Mac Os. After a couple of attempts, it now shutsdown immediatly after pressing the powerbutton (3 seconds after). No chime or nothing.
At first I thought this would only be a software problem, because the problem started immediatly after updating. So I put in my snow leopard dvd to boot into that, but I can't even get it to boot into the install dvd. Because it shuts down immediatly after pressing the power button. Then I started suspecting an hardware failure, which would be a very big coincidence to show up immediatly after booting up. These are the things I have tried so far, to no avail:
- Plugging of the power cord and removing the battery, then pressing and holding the powerbutton for at least 5 sec
- Holding the option, command, P and R keys during boot.
- Replacing the memory
- Replacing the hard drive
- Unplugging the super drive
- Starting up holding the d key
At a certain point I was hoping that It would be an harddrive or memory problem. I replaced both with examples I know for sure they are working. But still the same problem; macbook shuts down almostimmedialty after pressing the power button.
There is no warrany anymore, and technical support would cost me 49 euros per incident.. to probably hear that the macbook is beyond repair. I feel i have just thrown away 300 euro's for an nightmare experience. Does anybody now anything to try, i'm really desperate here

After installing the update to 10.6.8
What update was that?
So I put in my snow leopard dvd to boot into that, but I can't even get it to boot into the install dvd.
Did the previous owner also give you the discs that originally came with the computer? Those are what you need to troubleshoot with. You also need disc 1 to run the Apple Hardware Test.
There is no warrany anymore, and technical support would cost me 49 euros per incident..
Apple Store and AASP diagnostic testings are free. Suggest that you take full advantage of it. This way you can find out exactly what is wrong with your computer. Post back here with the diagnosis and someone will post DIY repair sites.

MacBook won't boot after updates

My girlfriend has a black 13" MacBook and we ran updates on it today and after it had installed all the updates and it went to reboot it now won't boot up. It turns on and you see the apple logo but then it comes up with a window saying that it needs to be restarted and in the background there is a few lines of "code." I am a PC user so I am doing my best to help her resolve this problem. I do love my iPhone and iTunes so don't hate me too much haha. I did some research on here and read how to boot up in safe mode and I tried to do this but it didn't work. Any help would be greatly appreciated.

She bought the computer used so unfortunately she does not have the start up disk. She also has not backed up the information on the computer but we are more concerned about getting the computer to work because she cannot afford to buy a new one and she has barely had this one more than a year. The only thing that is connected to the computer is the power cord and the battery is shot so we cannot disconnect the power cord and use the computer. Well I read the instructions on starting up in safe mode so I hold the power button until I hear the obnoxious beep and then hold the shift key down until u see the little gear thing and apple logo. Well I get the apple logo but no gear and then I get the pop up window that I spoke of before telling
Me to restart and there is the lines of "code" in the back ground.

System won't boot after update

After installing the latest system update (from Leopard 10.5.1 to 10.5.2) on my Dual Processor PowerMac G5, I was able to restart then within 2 minutes a freeze. I couldn't force quit...had to power done.
Upon powering on, my screen hangs on the gray screen for about a minute (with the clockwise powering up status symbol), then it shuts down on its own. It won't boot into safe mode. In single user mode, it tells me there is a "disk0s2: I/O error" ... Is my hard drive dead? I've tried resetting the PRAM, resetting the PMU button, unplugging all 3rd party devices, but to no avail.
I'm hopeful I can recover files somehow. Where should I proceed? I'm not sure exactly how the internal drives work. Can I, for instance, unplug and remove the top internal drive and place the 2nd internal drive where the top one was and see if i can boot from that drive?? Thereby determining which drive has the issue? Any advice is appreciated.
Thanks so much!
Sean

Can you boot off the leopard DVD and run the disk utility disk verification on the drive? If it's a hardware problem then there's probably not much you can do. If you have a TM backup of your system then you should be ok, since you can replace the drive and then restore your system to it from the TM backup.

X99 Sli Plus Blue bios won't boot after update.

Hello i tried to update the "blue bios" to the most recent Bios version.Following all the appropriate steps i updated the BioS and got the appropriate message (something like that,i can't remember the exact message) "Update was succesful your system now will reboot".After the reboot blue bios just won't boot.I cleared CMOS,i used the Multi BIOS switch (manual page en-30) to flash the blue bios trying all the versions from 1.7 down to 1.3 but nothing seems to work.The green BioS work fine on the default v1.3.My question is what should i do to make the blue bios work again?
CPU: Intel - 5820k
GPU: Radeon Sapphire R9 270x
Ram: Crucial Ballistix Sport 8GB Kit (4GBx2) DDR4 2400 MT/s (PC4-19200) CL16 SR x8 Unbuffered DIMM 288-Pin Memory BLS2K4G4D240FSA

I can't see anything about you preparing the stick as instructed.
Quote from: flobelix on 22-February-15, 01:47:26
A.) Download >>this<< bios archive and place it on your desktop. Do not decompress.
B.) Download and install the >>MSI HQ Forum USB flasher<< .
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB from working bios B.
G.) Once it booted successfully switch to bios A without powering down or rebooting
H.) Now follow the directions and let the tool flash bios A with version 1.7

Mac G5 won't boot after updating

Similar Messages

Maybe you are looking for