Mac game loaded with logic express, now its asking me for license key

My macbook came loaded with logic express 3 years ago, been working completely fine. Until today, where upon opening it asks me for the registration key which, if I don't, will not allow me to use the program. I don't have a registration key because I didn't purchase the software separately, and why it is asking for it now (after 3 years of usage) is beyond me.
Thoughts?

You should have the key with your documentation & install disk. However, if you haven't got it with your MB, call apple support. They are the only ones who can help you.
Fox

Similar Messages

I found an ipod 5th generation at the train station. i tried to find the owner i couldn't. i kept it and restored it, now its asking me for the apple id username that had setup the ipod. my question is how can i skip that step

I found and iPod touch 5th generation. I restored it now its asking me for the apple Id that had set up the iPod. Myoy quesyotion is ow can I skip that step.

JacobiJ, no email address/Apple ID is listed. It just says enter the Apple ID and password.
JacobiJ wrote:
Send them a email at the Apple ID email address and tell them you found their iPod. I'm sure they will be very greatful.

I just restore my iphone 4s now its ask me for icloud is that i was forgot how can i activate my phone

i just restore my iphone 4s now its ask me for icloud id is that i forgot how can i activate my phone

If you forgot your own Apple ID, click here and use Apple's iForgot service, or contact their Account Security team.
If you're being asked for someone else's Apple ID, either the device's original owner needs to contact Apple, or the person who set the lock needs to remove it.
(123598)

Im installing logic studio and its asking me for an original SN?

I put in my Product serial number then it asks me to put in my original serial number. I have no idea where that number is. No number Ive used has worked so far.

Did you buy an upgrade to Logic Studio? If so, you need to enter the old serial number first and then the application will ask you for the upgrade number. Also make sure you type it correctly 0 = Zero and O = Ohhh, etc.

I formatted my ipad with ios 7 and now its asking me for the previous owner's apple id. what do i do??

I formatted a previously owned apple ipad with the ios 7 in it. Now when i was setting it up again, its showing me the previous owner's apple id and asking for the password. I dont know the previous owner's password so i cannot set it up. What do i do? I need my ipad back...

Sorry alisha, but you have encountered an Activation Lock, and the only way you can get around it is to have the Previous Owner do the following:
Removing Previous Owner from Device
Sorry,
GB

My mac went black and now its asking for a guest password?

hello, I was trying to save all my information in my mac laptop and asked for a password I did type my admin password then laptop froze and went black! now its asking me for a guest password, I dont remember to have one! I tried all the passwords that I have/had and I doesnt take them! I cant pass from the start screen
If someone can help me!
thank you

That's not a password, it's your Apple ID. The same one you use to log onto this site or the App Store.

HT3423 My iMac came with logic Express 8 installed, how do I get it to work on my mac book pro

My iMac came with Logic Express 8 Pre installed. How do I get it to work on my Mac Book Pro

Along with your OS and applications installation DVDs, you should have gotten an LE8 installation DVD along with its manual and serial numbers when you bought your iMac.
Your license allows you to install LE8 on two computers as long as they are your computers, you are the sole user, and you do not run Logic on both simultaneously. So dig out your installation DVD, install it on your MacBook Pro and enter your serial number and you will be good to go.

How can I midi Roland TD-9 KX2 with Logic EXpress 9?

Hello everyone,
Here is my setup:
I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
I create a new track and select Audio and then I create another track and this time I choose External.
When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
Thanks in advance,

I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
Do what I say above and you will be rewarded.
Good Luck

Sync microKorg with Logic Express 9

I'm trying to sync the arpeggiator of my microKorg XL with Logic Express 9, using Logic as the master. I seem to have almost done it, in that tempo changes in Logic change the microKorg's tempo. However, I can only hear the microKorg whilst I'm either recording or playing back - I can't hear it if I press a few keys.
I think the problem lies in that I have "Local off" set in accordance with the microKorg manual. The manual says I should also "turn on echo back" on the computer - but I don't know how to do this in Logic Express.
Grateful for advice.

When you set "Local Off" in any synth with MIDI capability, it disconnects synth's keyboard from its sound engine. Switch it back ON to be able to play sounds again using microKorg's keyboard. There is no point to disable the keyboard in your case anyways. Unless of course, you want to avoid midi-loop (but that's only when you have both MIDI IN and MIDI OUT wired to Logic).

Syncing Fast Track Ultra (Slave) With Logic Express (Master)

I'm trying to get my fast track to slave with Logic Express, using Logic as the master. It doesn't appear to be sending out any messages. On my fast track I can get the midi 'in' light to blink but not the 'out.' in Logic, the transport bar on the bottom, says 'no midi' for both the in and the out. Does this sound like a Logic setup issue or a fast track ultra setup issue?

Hi,
1st: You need to set your drum machine clock to external. That's important if you want to make Logic the master. Be aware any clock signal only is available when Logic is in play mode (naturally, but sometimes i forget even the most logical things).
2nd: In the Audio-Midi-Setup, the Fast Track should be displayed. Open the MIDI window (Window-> show MIDI window). Click on the "add device" icon. A new device will be added (new external device). Now open the inspector for this new device. You can name it, adjust all these things like MIDI clock send/receive and other gizmos and give it a nice icon. Now you must "connect" this new device with you Fast track by simpy dragging a line from it's outputs to the Fast track input and vice versa. The MIDI setup window will now represent your hardware's cabeling.
Once you have done this correctly, you should be able to correctly select the Drum machine in Logic.
Fox

Mac Pro/Intel with Logic 8, HD Accel Hardware, Expansion Chassis - Anyone?

Hi,
I'm wondering if anyone out there is running a Mac Pro/Intel with Logic 8 and an HD Accel system with an expansion chassis. Apple does not support running Logic with HD hardware with an expansion chassis. However, we have been running one successfully (sort of) with Logic 8 on a G5. Unfortunately, the chassis we have doesn't provide the bandwidth that we need to get the track counts that we are looking for, so we are considering upgrading to a Mac Pro with either the Magma PE6R4 chassis or the Magma 64 bit 7 slot chassis. Anyone tried either of these configurations?
Thanks,
Ken Lewis
www.logicmixing.com

Hi,
I am running Logic Studio 8 on my Mac Pro 4-core 2.66 (specs below) using internal HDs only and it runs like a charm.
No overload message yet and it seems to me that I have to do feed it a lot more than I do right now to even come close to an overload message.
So with a 2.8 8-core you are well in line and should have quite some reserves.
My personal opinion is, if you can afford the money for the Mac Pro, go for it.
Have Fun
Stefan

Control surfaces with Logic Express

hello all
Im new to MAc , completely new having been PC since the year dot...Having used Cubase since atari days I have a Steinberg Houston Controller surface. Anyone know if it is possible to use it with Logic Express before I spend £150 on the programe please??

Hi,
nope, the surface wouldn't work natively on a Mac. You can only use it's MIDI features and remap the controls to functions in Logic. As long as the interface sends MIDI, this will work, but there won't be any access to the special features i guess. Guess why? Steinberg wouldn't want to provide a driver for another DAW than Cubase. Sneaky little ones they are...
But you can try to sell it through ebay.
Fox

I have East/West Symphony. Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?

I have East/West Symphony.
Will it work with Logic express and do I have to have that little red usb drive in the computer to authorize it?
Also, would it work with Garageband??

Thanks-that's the same driver I'm using now.
The M-audio techs were unable to tell me if Quattro would work with LE8, so I've been wasting my time and money trying to make it work.
They also gave me conflicting opinions as to whether or not "tip" polarity was an issue when using an after-market adapter. One said definitely yes, one or two others said definitely no.
Their phone tech line has a 20 to 40 minute wait when I call. The online support system is confusing, which even they admit. I don't think my next interface will be from M-audio.
Thanks very much for the response, it helps me get beyond this phase.
Is the Quattro of any use for anybody else (i.e., can I sell it or give it away)?

Logic Pro from app store with Logic Express installed

Hi there!
Does anybody know what happens if I install Logic Pro from the Mac App Store while Logic Express is already installed? Will this drag me derectly into dependency **** or can the two coexist?
Because I really wouldn't want to wreck my working Logic Express Setup by installing Logic Pro...
Cheers
Volker

Hi
It should work fine, with the exception that opening projects via the Finder may open Express rather than Pro (easily fixed).
CCT

Does mainstage work with logic express 9

hi , do all the features and plug-ins work with logic express 9 or are some features disabled .
or are they not compatible at all
thanks

I have just spoken to two supervisors and 4 underlings about this exact concern and they ABSOLUTELY REFUSE TO BUDGE in regard to a sidegrade or smaller upgrade fee. I have been a loyal Mac user, ****, an EVANGELIST since 1990, spent well over 100 grand on the apple products I needed and I tried being super polite, explained that I had barely had a chance to learn a thing about Express since I bought it in the store after realizing that there was no way I could afford the Logic Pro 9 box sitting next to it.
THE ANSWER IS IF YOU WANT THE NEW, CHEAPER VERSION OF LOGIC PRO 9 AND MAINSTAGE, YOU NEED TO TOSS OUT YOUR ALREADY CANCELLED LOGIC EXPRESS 9 DISKS, FORGET YOU BOUGHT THEM IF YOU CAN, AND, IF YOU WERE DOWNSIZED LIKE I WAS 3 YEARS AGO BECAUSE MY BACK GAVE OUT...
GO AHEAD. SEE IF YOU CAN KEEP YOURSELF FROM THROWING UP WHEN YOU HIT THAT PURCHASE BUTTON ON THE TWO PROGRAMS THEY REDUCED IN PRICE.
REMEMBER, THOUGH...IT IS NOT LOGIC STUDIO YOU ARE GETTING. THEY SPLIT THE BOX UP SO THE REMAINDER OF THE SOFTWARE IN IT WENT INTO FINAL CUT PRO. THE ORIGINAL BOX YOU CAN STILL GET FOR $500 UNTIL THEY SELL OUT.
DON'T SHOOT THE MESSENGER. THIS IS ONE ANGRY EX-EVANGELIST WHO NO LONGER HAS ANY REVERENCE LEFT FOR APPLE. I GUESS WHEN THEY LOST STEVE, THEY LOST TOO MUCH. SOMETHING IS VERY, VERY WRONG ABOUT THIS POLICY. SCREW THE PEOPLE WHO SPENT THE WHOLE AMOUNT, NOBODY AT APPLE REALLY CARES ABOUT ANYTHING EXCEPT WHAT IS LEFT IN YOUR WALLET.
SORRY FOR THE RANT, BUT I AM IN SHOCK AFTER THE LAST TWO HOURS OF TRYING TO GET THEM TO SEE HOW WRONG THIS POLICY IS.
WE HAVE BEEN SHAFTED, BIG TIME. IN THIS ECONOMY, THAT IS ONE HUGE INSULT IMHO.
GOOD LUCK EVERYONE.

Mac game loaded with logic express, now its asking me for license key

Similar Messages

Maybe you are looking for