Mac generally misbehaving and locking up all the time.

Hey all, hoping one of you can help me out here.
I bought a 13" white macbook in march of this year and basically isnt working the way its meant to. A few days after first having it the mac just froze up and wouldnt respond to anything other than switching off and trying again.
Thought it was a 1 off and ignored it, it then did it a few more times over the first month but just brushed it off again.
Its progressively got worse, and whereas it only did it occasionally to start with, about a month or so ago it did it 4 times in 20 mins.
Everytime its crashed its been when I have being doing different stuff, browsing internet, writing essays,just browsing iphoto, playing the sims, nothing constant about each crash.
Seeing as it does just keep happening more and more often I decided to go to the genius bar on friday to see what they said.
I was told there was only a few issues that would cause this, either software, overheating, hardware or something wrong with the hard drive.
So the guy who was helping me out there checked the hard drive twice, nothing wrong. I know its not down to overheating cause it never gets that hot, ran a hardware diagnostic thingy and wasnt that either, so as a last resort he reinstalled the OS on it as that should have fixed the problem.
Yesterday it decided to start locking up on me again.. so have booked another appointment for monday to see if they can work out what the issue is, but just getting really annoyed that something that is only a few months old is just obviously not fit for purpose
Anyone got any ideas as to why it doesnt want to behave?

I have looked for the crash logs before and in the apple store they did check for them. There isnt a crash report for everytime it has crashed but I was told you dont always get them as sometimes the system locks up before it has a chance to write one or something along those lines.
Ive had 2 crashes since my visit on thursday, one I have data for and the other there was nothing that I could see.
All my crash reports are to do with iphoto, but I reinstalled all of that friday night as it refused to open and was giving me errors..
I did find this under the error console the other night at the approx time of the first crash
Jun 26 17:38:01 rachzilla ntpd[24]: time reset -0.131598 s
Jun 26 18:03:58 rachzilla PubSubAgent[126]: Database on disk (v10020) is newer than what I know (v10019), but I think I can still use it.
Jun 26 19:17:16 localhost kernel[0]: npvhash=4095
Jun 26 19:17:11 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Jun 26 19:17:11 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Jun 26 19:17:16 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jun 26 19:17:16 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Jun 26 19:17:16 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Jun 26 19:17:16 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Jun 26 19:17:16 localhost DirectoryService[11]: Launched version 5.6 (v514.24)
Jun 26 19:17:16 localhost kernel[0]: hi mem tramps at 0xffe00000
Jun 26 19:17:16 localhost kernel[0]: PAE enabled
Jun 26 19:17:16 localhost kernel[0]: 64 bit mode enabled
Jun 26 19:17:16 localhost kernel[0]: Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
Jun 26 19:17:16 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jun 26 19:17:16 localhost kernel[0]: vmpagebootstrap: 445645 free pages and 13107 wired pages
Jun 26 19:17:16 localhost kernel[0]: migtable_maxdispl = 79
Jun 26 19:17:16 localhost kernel[0]: 94 prelinked modules
Jun 26 19:17:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
Jun 26 19:17:16 localhost kernel[0]: AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
Jun 26 19:17:16 localhost kernel[0]: Loading security extension com.apple.security.TMSafetyNet
Jun 26 19:17:16 localhost kernel[0]: calling mpopolicyinit for TMSafetyNet
Jun 26 19:17:16 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jun 26 19:17:16 localhost kernel[0]: Loading security extension com.apple.nke.applicationfirewall
Jun 26 19:17:16 localhost kernel[0]: Loading security extension com.apple.security.seatbelt
Jun 26 19:17:16 localhost kernel[0]: calling mpopolicyinit for mb
Jun 26 19:17:16 localhost DirectoryService[11]: Improper shutdown detected
Jun 26 19:17:16 localhost kernel[0]: Seatbelt MACF policy initialized
Jun 26 19:17:16 localhost kernel[0]: Security policy loaded: Seatbelt Policy (mb)
Jun 26 19:17:17 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jun 26 19:17:17 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jun 26 19:17:17 localhost kernel[0]: MAC Framework successfully initialized
Jun 26 19:17:17 localhost kernel[0]: using 9175 buffer headers and 4096 cluster IO buffer headers
Jun 26 19:17:17 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
Jun 26 19:17:17 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
Jun 26 19:17:17 localhost kernel[0]: mbinit: done
Jun 26 19:17:17 localhost kernel[0]: Security auditing service present
Jun 26 19:17:17 localhost kernel[0]: BSM auditing present
Jun 26 19:17:17 localhost kernel[0]: rooting via boot-uuid from /chosen: 03335B18-73F8-35C4-947A-F1E3D00C4043
Jun 26 19:17:17 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jun 26 19:17:17 localhost kernel[0]: BTCoexistence feature not supported!
Jun 26 19:17:17 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
Jun 26 19:17:17 localhost kernel[0]: 5.10.38.24
Jun 26 19:17:17 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/Hitachi HTS543212L9SA02 Media/IOGUIDPartitionScheme/Customer@2
Jun 26 19:17:17 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
Jun 26 19:17:17 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 8418816 to: 11446272 (joffset 0x10302000)
Jun 26 19:17:17 localhost kernel[0]: FireWire (OHCI) Lucent ID 5903 built-in now active, GUID 002500fffea4789c; max speed s400.
Jun 26 19:17:17 localhost kernel[0]: [HCIController][configurePM] power parent ready after 1 tries
Jun 26 19:17:17 localhost kernel[0]: jnl: unknown-dev: journal replay done.
Jun 26 19:17:17 localhost kernel[0]: HFS: Removed 4 orphaned unlinked files or directories
Jun 26 19:17:17 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Jun 26 19:17:17 localhost kernel[0]: Jettisoning kernel linker.
Jun 26 19:17:17 localhost kextd[10]: 410 cached, 0 uncached personalities to catalog
Jun 26 19:17:17 localhost kernel[0]: Resetting IOCatalogue.
Jun 26 19:17:17 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 19:17:17 localhost kernel[0]: Matching service count = 1
Jun 26 19:17:17 localhost kernel[0]: Matching service count = 2
Jun 26 19:17:17: --- last message repeated 4 times ---
Jun 26 19:17:17 localhost kernel[0]: NVEthernet: Ethernet address 00:25:00:a4:78:9c
Jun 26 19:17:17 localhost kernel[0]: AirPort_Brcm43xx: Ethernet address 00:24:36:b5:f6:62
Jun 26 19:17:17 localhost kernel[0]: Previous Shutdown Cause: 3
Jun 26 19:17:17 localhost kernel[0]: NVDANV50HAL loaded and registered.
Jun 26 19:17:18 localhost kernel[0]: IGPU: family specific matching fails
Jun 26 19:17:18: --- last message repeated 2 times ---
Jun 26 19:17:18 localhost kernel[0]: Matching service count = 0
Jun 26 19:17:28 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[16]: starting
Jun 26 19:17:29 localhost fseventsd[36]: event logs in /.fseventsd out of sync with volume. destroying old logs. (41785 21 41987)
Jun 26 19:17:29 localhost fseventsd[36]: log dir: /.fseventsd getting new uuid: 7FADD2D3-9DDF-457F-B588-CE0C61871088
Jun 26 19:17:29 localhost bootlog[43]: BOOT_TIME: 1246040228 0
Jun 26 19:17:29 localhost rpc.statd[28]: statd.notify - no notifications needed
Jun 26 19:17:29 localhost blued[44]: Apple Bluetooth daemon started.
Jun 26 19:17:29 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]: Login Window Application Started -- Threaded auth
Jun 26 19:17:30 localhost /usr/sbin/ocspd[54]: starting
Jun 26 19:17:31 localhost kernel[0]: NVEthernet::mediaChanged - Link Down
Jun 26 19:17:32 localhost kernel[0]: AirPort: Link Down on en1
Jun 26 19:17:32 rachzilla configd[14]: setting hostname to "rachzilla.local"
Jun 26 19:17:32 rachzilla mds[30]: (/.Spotlight-V100/Store-V1/Stores/E8979733-6CAA-41EE-99A0-9403D0A593D9)(Error) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /.Spotlight-V100/Store-V1/Stores/E8979733-6CAA-41EE-99A0-9403D0A593D9/live.0.; needs recovery
Jun 26 19:17:33 rachzilla mds[30]: (/.Spotlight-V100/Store-V1/Stores/E8979733-6CAA-41EE-99A0-9403D0A593D9)(Error) IndexSDB in copy_datastore:sdb: ERR: invalid master datastore! (/.Spotlight-V100/Store-V1/Stores/E8979733-6CAA-41EE-99A0-9403D0A593D9/store.db )
Jun 26 19:17:34 rachzilla kextd[10]: writing kernel link data to /var/run/mach.sym
Jun 26 19:17:35 rachzilla kernel[0]: Auth result for: 00:c0:49:54:c6:6a MAC AUTH succeeded
Jun 26 19:17:35 rachzilla kernel[0]: AirPort: Link Up on en1
Jun 26 19:17:43 rachzilla loginwindow[31]: Login Window Started Security Agent
Jun 26 19:17:43 rachzilla authorizationhost[71]: MechanismInvoke 0x125860 retainCount 2
Jun 26 19:17:43 rachzilla SecurityAgent[72]: MechanismInvoke 0x1015f0 retainCount 1
Jun 26 19:17:43 rachzilla loginwindow[31]: Login Window - Returned from Security Agent
Jun 26 19:17:43 rachzilla SecurityAgent[72]: MechanismDestroy 0x1015f0 retainCount 1
Jun 26 19:17:43 rachzilla authorizationhost[71]: MechanismDestroy 0x125860 retainCount 2
Jun 26 19:17:43 rachzilla loginwindow[31]: USER_PROCESS: 31 console
Jun 26 19:17:43 rachzilla com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[68]): Exited: Terminated
Jun 26 19:17:44 rachzilla /System/Library/CoreServices/coreservicesd[52]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(Rachel Anderson's Public Folder) returned -14135
Jun 26 19:17:46 rachzilla com.apple.launchd[73] ([email protected][77]): Exited with exit code: 1
Jun 26 19:17:48 rachzilla /Applications/Microsoft Messenger.app/Contents/MacOS/Microsoft Messenger[98]: Warning: accessing obsolete X509Anchors.
Sorry I know it was a major long message, but no idea what part of that may have been relevant!

Similar Messages

  • I recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in notebook trying to record.

    i recently upgraded to Lion and i find that my computer is running slow and applications are crashing.  For example I have Word 2011 for Mac and it crashes all the time I end up losing my work.  It often happens when I'm in class using notebook and when I press record my computer starts thinking and it freezes.
    Also, I feel that it overheats often and my battery runs out pretty quickly.  I had the macbook (black) and this never happened before.  I'm not sure if I'm doing something wrong or if there is something with my computer.I bought my computer summer 2010, I don't think this should be happening. Please Help......

    This is exactly what keeps happening to mine too.  I was at a conference taking notes, and I was
    using the Notebook template, and doing some audio recording simultaneously.  About 3 hours into the conference (not consistently recording, but on and off with the sessions) my file wouldn't save anymore, saying something like "File cannot be modified while in use with another program" and "Invalid file name" when I would go back into my folder to look for it). I tried installing some updates from Microsoft, and when I restarted, I was at least able to open my old notes again, and so far it looks like the audio was working.  However, today at the conference, the same thing happened again, but I wasn't actively recording any audio (though after I had copy and pasted my second file of notes into the original, I went back to using it after re-naming it). 
    Does the crash happen to you under similar cirucumstances?  The update might help a little, but it is definitely not the solution.  Does anyone have any solutions?  Lion shouldn't be this buggy... I moved to Mac to get away from the garbage of bugs and compatibility issues...

  • HT5242 Hello to everyone!I think that I have installed a virus to my mac because safari opens advertising sites all the time and Facebook stucks a lot.What i should do to make my mac as it was before?

    Hello to everyone!I think that I have installed a virus to my mac because safari opens advertising sites all the time and Facebook stucks a lot.What i should do to make my mac as it was before?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • My Mac book pro has all the sudden started running slow and freezing up all the time , any ideas why or what to do

    Hello ,
    I am not very good with tech things , I have a Mac Book Pro and have had it for almost two years with no problems. Now for the past week or so it has started running extremely slow and freezing up all the time. I am not really sure what is going on but is there any advice on something to do or any idea what could be wrong.

    My MacBook Pro is running very slow.
    EtreCheck version: 2.2 (132)
    Report generated 5/6/15, 9:40 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2009) (Verified)
        MacBook Pro - model: MacBookPro5,3
        1 2.66 GHz Intel Core 2 Duo CPU: 2-core
        8 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 63 - SN = W05024HXDBWZA
    Video Information: ℹ️
        NVIDIA GeForce 9400M - VRAM: 256 MB
        NVIDIA GeForce 9600M GT - VRAM: 256 MB
            Color LCD 1440 x 900
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 3:9:20
    Disk Information: ℹ️
        Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macbook Pro (disk0s2) / : 319.08 GB (53.55 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-868 
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. Built-in iSight
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/TechTool Pro 8.app
        [not loaded]    com.micromat.driver.spdKernel (1 - SDK 10.10) [Click for support]
        [not loaded]    com.micromat.driver.spdKernel-10-8 (1 - SDK 10.10) [Click for support]
            /Library/Checkmate/CheckmateWorkerDaemon.app
        [not loaded]    com.micromat.driver.SPDKernel (1 - SDK 10.8) [Click for support]
    Startup Items: ℹ️
        HWNetMgr: Path: /Library/StartupItems/HWNetMgr
        HWPortDetect: Path: /Library/StartupItems/HWPortDetect
        StartOuc: Path: /Library/StartupItems/StartOuc
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [failed]    com.epson.esua.launcher.plist [Click for support] [Click for details]
        [running]    com.micromat.CheckmateAgent.plist [Click for support]
        [running]    com.micromat.TechToolProAgent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.adobe.adobeupdatedaemon.plist [Click for support]
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.micromat.CheckmateIdleDaemon.plist [Click for support]
        [loaded]    com.micromat.CheckmateWorkerDaemon.plist [Click for support]
        [running]    com.micromat.TechToolProDaemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Click for details]
        [loaded]    com.bittorrent.BitTorrent.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.spotify.webhelper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        MagicMenu    Application  (/Applications/StuffIt Archive Manager.app/Contents/MacOS/MagicMenu.app)
        Google Drive    Application  (/Applications/Google Drive.app)
        AdobeResourceSynchronizer    Application  (/Applications/Adobe/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Google Chrome    Application Hidden (/Applications/Google Chrome.app)
        EvernoteHelper    Application  (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
        RealPlayer Downloader Agent    Application  (/Users/[redacted]/Library/Application Support/RealNetworks/RealPlayer Downloader Agent.app)
        Garmin Express Service    Application  (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 40 Check version
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        AdobeAAMDetect: Version: 3.0.0.0 - SDK 10.9 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        RealPlayer Plugin: Version: Unknown [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
        searchtab
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        TechTool Protection  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macbook Pro: Disk size: 319.08 GB Disk used: 265.52 GB
        Destinations:
            Rat Drive [Local]
            Total size: 249.72 GB
            Total number of backups: 4
            Oldest backup: 2014-11-12 00:25:11 +0000
            Last backup: 2015-01-08 09:48:54 +0000
            Size of backup disk: Too small
                Backup size 249.72 GB < (Disk used 265.52 GB X 3)
    Top Processes by CPU: ℹ️
            11%    mds_stores
             6%    Google Chrome Helper(13)
             4%    Google Chrome
             2%    RealPlayer Downloader Agent
             1%    WindowServer
    Top Processes by Memory: ℹ️
        1.52 GB    Google Chrome Helper(13)
        723 MB    kernel_task
        442 MB    softwareupdated
        188 MB    Google Chrome
        139 MB    mtmd
    Virtual Memory Information: ℹ️
        1.24 GB    Free RAM
        6.76 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 6, 2015, 08:33:36 PM    /Library/Logs/DiagnosticReports/mtmd_2015-05-06-203336_[redacted].cpu_resource. diag [Click for details]
        May 6, 2015, 06:25:14 PM    Self test - passed
        May 6, 2015, 06:23:47 PM    /Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-06-182347_[redacted].cra sh
        May 5, 2015, 02:54:50 PM    /Library/Logs/DiagnosticReports/firefox_2015-05-05-145450_[redacted].cpu_resour ce.diag [Click for details]
        May 5, 2015, 11:51:54 AM    /Library/Logs/DiagnosticReports/discoveryd_2015-05-05-115154_[redacted].crash
        May 4, 2015, 04:42:23 PM    /Library/Logs/DiagnosticReports/discoveryd_2015-05-04-164223_[redacted].crash

  • Thunderbird locks up all the time and I have restarted with add ons disabled. SOLVED: caused by McAfee

    locks up all the time
    I have restarted with add ons disabled and still locks up.
    want to uninstall and wipe it clean (no account info, old emails, Etc.)
    I have backed up file
    Thanks,
    Bill

    https://wiki.mozilla.org/Thunderbird:Testing:Antivirus_Related_Performance_Issues#McAfee

  • My mac redirects me to other sites all the time.its some what slow.how can i fix?

    my mac redirects me to other sites all the time.its some what slow.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
    Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */   /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Name/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-  
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    8. If you see an error message in the Terminal window such as "syntax error," enter
    exec bash
    and press return. Then paste the script again.
    9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
    11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • My yahoo email locks up all the time now.

    My yahoo email locks up all the time now.  I have to force reload every time. I receive and send emails OK.  I have the same problems on another Mac with older OS and still same problem.  I recently upgraded it to Lion and the problem still exists.  It started 4-6 weeks ago and has progressivley gotten worse.  I've had yahoo email for years now but am considering dropping this email account if it's not soon fixed.  Thanks for any input...

    Very possibly your iPod is faulty. Is it new, or has it ever worked correctly?
    Before you think about sending it off for service, have you tried restoring it?

  • HOW DO I KEEP MY VOLUME BUTTON FROM LOCKING UP ALL THE TIME?

    HOW DO I KEEP MY VOLUME BUTTON FROM LOCKING UP ALL THE TIME? I UNDID IT ONCE BEFORE BUT CAN'T KEEP IT FROM HAPPENING.

    Cajuntwin2
    *Tip: ALL CAPS = SHOUTING*
    You don't tell us what year model MBP you have. Also, there is no such thing as iOS 10.9.5, but there is Mac OS X 10.9.5 Mavericks. In addition to that, tell what you mean exactly by "... locking up all the time..." and What you Did exactly when you "... undid it once before..."
    ÇÇÇ

  • How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

    How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

    As long as you share that AppleID for iCloud, you cannot.  You are sharing a a single iCloud account and sync services.  The only thing you can do is get a second AppleID and use it with iCloud - you do not have to use that new AppleID for anything but iCloud (ie. you can still share an AppleID for iTunes and App store purchases).
    P.S. I am assuming you both want to sync your contacts with iCloud?

  • My daughter and granddaughter both have the same model iPhone.  I can text my granddaughter but when I try to text my daughter I get the message that she is not registered at iMessage, but I know that she is and gets texts all the time. What do I need to

    My daughter and granddaughter have the same model iPhone.  I can go messages and text my granddaughters phone from my ipad2, but when I try to text my daughter I get the message that she is not registered with I message, but she is registered and gets texts all the time.  What do we need to do?

    Pattypegr wrote:
    The blue bubble will not turn on on the iPad when I try to message her on her I phone.  She has IMessage turned on.
    What blue bubble are you trying to turn on? If you mean that the Send button will not work, go to Settings>Messages>Show Subject Field>Off. Make sure that is set to off.
    If you send an iMessage, the texts between the devices appear in a blue bubble.
    iMessages only work between iOS devices and they are different than the standard text messages that any cell phone can send to another cell phone.

  • HT2731 "Sign in with the Apple ID that was used to set up this iPhone." i dit a restore and this is all the time coming up but i bouth this from someone and i cant sign in with my id :-(

    i did a restore and this is all the time coming up but i bouth this from someone and i cant sign in with my id :-(

    i forgot my apple id and now when i reset my phone .... in setup process its askin the apple id but i forgot it what to do now

  • Waveburner and Soundtrack Pro :ask for a serial and XS key all the time

    Dears all,
    i have installed the Logic package on a new Mac. All seems fine but all the time i start Waveburner or Soundtrack pro i get a serial number and xs key dialog box. Can someone help me ?
    Thanks in advance.
    The system is a iMac 27 3.4 os 10.8.3.
    Best
    -Anton

    Problem solved in this way :
    Launch Waveburner -> type or copy the Logic 9 serial -> at the second dialog box ( insert xs key or type the serial ) type or paste the Logic 8 serial number.
    It work and also Sountrack is running flawless without serial ask.
    Cheers.
    -A

  • Show Keywords and Adjust Menus all the time.

    I am now fortunate enough to have a dual-monitor setup, and wish to have the Keywords and Adjustment menus open all the time using iPhoto '08. Is there a way to do this? I see nothing in the Preferences that will allow such.

    Go to the Last Import smart album, select all photos and create a new album with them.  Open that album, select the photo you want to have the same keywords, type Command+K to bring up the Keyword pane and add keywords to all selected photos at the same time.
    There are several Apple scripts for adding titles to selected photos.  They can be found in Photos for Mac User Tips.  There is also a script for adding the same Description to multiple photos.
    Moments in Photos are the new Events, i.e. groupings of photos sorted by date taken.
    When the iPhoto Library was first migrated to Photos there was a folder created in the sidebar titled iPhoto Events and all migrated iPhoto Events (which are now Moments) are represented by an album in that folder. To open the sidebar if it's not already open use the Option+Command+S key combination.
    There's a way to simulate events in Photos.
    When new photos are imported into the Photos library go to the Last Import smart album, select all the photos and use the File ➙ New Album menu option or use the key combination Command+N.  Name it as desired.  It will appear just above the iPhoto Events folder where you can drag it into the iPhoto Events folder
    When you click on the iPhoto Events folder you'll get a simulated iPhoto Events window.
    The downside to the simulation is that the Albums/Events can only be sorted automatically by Title. But they can also be sorted manually, either in the sidebar or in the folder's window at the right.
    Ask Apple for more sorting options in Photos via https://www.apple.com/feedback/photos.html.

  • My ifaBook G4 will not type fast and makes errors all the time, why?

    The error in tht stsi title to this que.  This mat ess is what I getg all the time when I want to type anything on my iBook.  Do I need a new key  board or what?
    Often the entire page disapears, the cursor will not follow the flow of script ever and always jumps off the page or at the beginning.  What is going on?

    Hello,
    Try resetting the PMU and see if that helps. http://support.apple.com/kb/HT1431
    If not, then it would look to be a fault with the keyboard. try cleaning the keyboard first with some compressed air. if that don't work then it would require another keyboard.

  • My iphone won't power down and stays on all the time.  I have rebooted but it still wont power down. any solutions?

    My iphone stays on all the time and won't power down.  I have tried rebooting but it still won't power down. any suggestions?

    i mean that after i use my phone it won't go to a black screen after a few minutes...i guess maybe its called to 'sleep' but the screen stays bright...the light doesnt dim.

Maybe you are looking for

  • How to connect my CQ60 notebook to TV with "HDMI to RCA" cable?

    Hi there I have a Compaq Presario CQ60-213TU notebook computer which has an HDMI port. I bought an "HDMI to 3RCA+VGA" cable from ebay. I was able to connect my laptop to the extenal display with VGA, but when i tried to connect my laptop to my non HD

  • Q_1 - Q_2 DataLink. Q_2 columns are not apperaing in Generate to file - XML

    Dear experts i have developed a report in 6i against Oracle Applications 11i, Purchasing Module ...... I have two Queries in DataModel Q_1<->Q_2 with DataLink. The only problem is Q_2 columns are not appearing in Generate to file -> XML. I developed

  • Book-Function/PDF: Links between documents in pattern pages...

    Hello, we try to use InDesigns book-function for a complex presentation. It should work like this: We habe a book-file that collects single indesign files with projects. At the beginning there is a "start" file with standard-content, followed by THRE

  • Extend base class to customize some properties

    Hi Using Jdev 11g I need to extend UIGraph class to change the defualt color of pie graph . anyone have a solution to it ? i already extend the class but i donot know what is next steps and what is the method i must to override ??

  • ASCP is showing onhand quantity as negative in workbench

    Hi All, ASCP is showing oh hand quantity for an item as negative in ASCP workbench, when we checked for the same item in source instance, it shows as 71 available. ASCP shows two rows for onhand, one as positive 52 and one as negative -16 Could anybo