Mac HD unmounted; Boot Camp partition still available

Hi there,
So I've seen many different threads regarding this issue, but I'm in a particular situation and I am looking for some advice.
Regarding my situation, I have the problem where every time I boot my Mac, the "grey bar" loads for a bit, stops, and shuts down. I went to Disk Utility in Recovery Mode to check it out, and it stated that the disk can't be repaired and advised me to back-up and restore the drive. The thing is, I don't have a back-up of my drive. I know, in hindsight, that it was stupid for me not to consider backing it up, but as the title suggests, I still have access to my Windows partition where i'm able to copy and paste files from my Mac Drive to either my Windows Drive or other disks.
From the windows partition, I can see all the files of the damaged Mac Drive and copy/paste them where I want (I have already copied/pasted individual important files on a flash drive), so my question is, is there a way of backing up my Mac HD drive via something like Time Capsule now or is it too late at this point? I know I can back-up individual files but is there an easier way of restoring from say, a previous state that is stored somewhere?
Any help is appreciated. If you need any more information, please let me know as i'm unsure about what other information is needed.

Opey:
How about trying the option from the Windows side? Here is how:
1. Boot into Windows
2. *Right Click* on the *Boot Camp Icon* (Black diamond shaped icon in the Windows system tray near the clock).
3. Choose *Boot Camp Control Panel* on the pop up
4. Click on *Startup Disk* tab
5. Choose *Macintosh HD* and choose OK
6. Shutdown Windows normally and reboot.
See if the above procedure works for you.
Axel F.

Similar Messages

Accidentally Unmounted Boot Camp Partition

Hi,
I had accidentally unmounted my Boot Camp Partition the other day. When I mounted it back using disk utility, it didn't show up under Startup Disk. The partition still shows up on my Desktop and the windows files are still in tact.
This is what Disk Utility showed:
Name : disk0s3
Type : Volume
Disk Identifier : disk0s3
Mount Point : /Volumes/Untitled
File System : Windows NT File System (NTFS)
Connection Bus : Serial ATA 2
Device Tree : /PCI0@0/SATA@1F,2/PRT2@2/PMP@0/@0:3
Writable : No
Universal Unique Identifier : F7D4C476-E67F-41A4-BD31-900E40EA3D21
Capacity : 201.0 GB (215,795,892,224 Bytes)
Free Space : 175.1 GB (187,998,601,216 Bytes)
Used : 25.9 GB (27,797,286,912 Bytes)
Number of Files : 142,474
Number of Folders : 0
* Owners Enabled : No*
Can Turn Owners Off : No
Can Be Formatted : No
Bootable : No
Supports Journaling : No
Journaled : No
Disk Number : 0
Partition Number : 3
When opening Boot Camp Utility, it gives me the following message:
+Boot Camp Assistant cannot be used: You must update your computer's Boot ROM firmware before using this setup assistant.+
My Boot ROM firmware is up to date, Boot ROM Version: MP41.0081.B07
Also, Mac OS takes more than 10 minutes to load during startup. I have never experienced this problem before. Could this be related to the accidental unmount-ing?
Appreciate some help

It's gone, the icons in finder are just icons. You will have to reinstall and restore your backup if you have one.

How do I restore data to a new mac with windows boot camp partition?

Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on Lion

I am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp

How do install windows hard drive (from dead pc) into boot camp partition

My Windows 7 desktop died recently, so I took the opportunity to buy a Mac Mini (latest version as of Feb 2012) as a replacement. I want to transfer the Windows 7 installation (from the dead PC) including all applications, accounts, settings, user files, etc to the Boot Camp Partition. Can someone please provide the steps on how to perform the Win 7 migration to the Mac Mini.

Just to clarify:
I want to install the Windows 7 installation from dead the PC into the Mac Mini's Boot Camp partition.
I installed the PC's hard drive into an enclosure and connected it to the Mac Mini via the USB port.
What I want to do is the following:
1) Do a Windows 7 "fresh" install in the Mac Mini Boot Camp partition.
2) Migrate all the applications installed on the Windows 7 PC and their associated data.
3) Migrate all user accounts and data.
Is there a tool that can transfer all applications and user accounts from the Windows 7 Hard Drive to the Boot Camp partition on the Mini?
Based on the documentation the Window Migration tool is Lion OS utility and does not perform a complete migration of all applications installed on the Windows machine.
thank you.

How do I write to my boot camp partition with Paragon NTFS that comes with Mountain Lion? Or how do I get my boot camp partition to show up in Paragon's "Available NTFS partitions:" panel like my external hard drive does?

I've just set up boot camp on my MacBookPro with a freshly installed Mountain Lion and Windows 7.
I would like to read and write in both directions from drive to drive if possible. I've hunted around quite a bit to try and work this out, and so far I understand that one can write to or transfer files from one drive to the other with Paragon NTFS among other softwares.
I noticed when I looked in my system preferences the utility "Paragon NTFS for Mac OS X" came with Mountain Lion and it will recognize an external hard drive when I have one plugged in under "Available NTFS partitions:". However, it does not automatically recognize my NTFS boot camp partition nor does it automatically give me write access.
Is the Paragon NTFS that comes with Mountain Lion limited in some way?
Do I still need to purchase and download the software of the same name from Paragon to get the full write privilidges I want or is there something I can do to get the version of Paragon on my MAC to recognize and give me write priviledges to my boot camp partition?
I'm open to all suggestions to get the read / write access between partitions in my boot camped drive.
MacFUSE is also listed in the System Preferences of my machine (it also came with Mountain Lion), if that helps. I'm still working out exactly what each of these is supposed to do and how I can use it to accomplish the task at hand.
My boot camp drive does appear normally in other contexts and in disk utility it indicates that the drive is mounted.
Thank you for any guidance you can give me.

Interesting. Comes with? you didn't have either before? Paragon is commercial and is now v. 10.0, they were the only one keeping updated and was supporting 10.7.4. I would not enable more than one.
For writing to HFS Paragon has theirs but probably give the nod to MacDrive there.
I never do an upgrade to a new OS over the old system, I backup (clone) and format the drive with the new OS and do the install so whatever is there I know is clean and also to keep from carrying around leftovers from years and systems past.
I would assme Paragon is limited. Try their site and knowledge base?
MacDrive
http://www.mediafour.com/updates/macdrive
Paragon HFS
http://www.paragon-software.com/home/hfs-windows/
Paragon NTFS
http://www.macupdate.com/app/mac/26288/ntfs-for-mac-os-x
http://www.paragon-software.com/home/ntfs-mac/

Firewire Target DIsk Mode Mac partition not Boot Camp partition

Hi I'm having issues starting up my Mac and would like to Firewire mount the drive then image it. However, when I do so the Boot Camp partition mounts instead of the Mac partition. I've tried using Disk Utility on the host machine to mount the Mac partition (it does show up in Disk Utility) without success, Is there anything I can do.
(Yes I have yesterday's Time Machine backup, but would still prefer to do a full image before wiping and installing the OS).

Are you talking about starting up one computer in Target Disk Mode and then seeing it with a second computer (and if so, which model computer and which OS)?
[How to use FireWire target disk mode|http://support.apple.com/kb/HT1661] includes description of hardware and software requirements.
[What to do if your Mac doesn't enter FireWire Target Disk Mode|http://docs.info.apple.com/article.html?artnum=75414], also read about [Open Firmware Password Protection|http://www.apple.com/support/downloads/openfirmwarepassword.html] which can disable Target Disk Mode.
[Technical Note TN 1189|http://developer.apple.com/technotes/tn/tn1189.html#TargetMode] - driver details for TDM

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?

I have recently purchased a hybred 750GbHDD as an upgrade for my MAC Book Pro (Intell Version) I have a boot camp partition to the original 500GB HDD. How can I expand both partitions to fit the new drive?
I have tried bootcamp and have had no luck due to the fact that boot camp doesn't see the additional HDD space of 250Gb. What am I not doing?

Ouch, well there is a problem.
This is the stack of partitions on your old drive
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
This is the same stack on your new drive imaged from the old one.
EFI (hidden)
Lion (50GB say)
Bootcamp (50GB say)
Lion Recovery Partiton (hidden)
Emtpy Space (100GB say)
This is what you want
EFI (hidden)
Lion (100GB say)
Bootcamp (100GB say)
Lion Recovery Partiton (hidden)
EFI has to be at the top of the drive and Lion Recovery has to be at the bottom of the drive.
And you only have four partitions.
You can't move the Lion Recovery Partition or Bootcamp partiton, however you can expand the Lion Partition into empty space below it. (but can't delete or move the Lion Recovery partition)
Your Duplicator duplicated perfectly, too perfectly Likely would work with same sized drives/partitions.
This is what your going to need to do.
You need to move the Bootcamp partition to a blank external drive using WinClone and disconnect. This is so you have two backups of it. (one on your old 500GB drive)
You will need a drive enclousre or IDE/SATA to USB adapter cable for the older 500GB drive and option key boot from it. (some enclosures can't be booted from so check first Other World Computing is good place to ask)
Download the free Carbon Copy Cloner, grab any new files off the new 750GB internal drive to the old 500GB your booted from.
Open Apple's Disk Utility and Erase with Zero option the entire internal 750GB drive and let it rip, this will map off as many bad sectors and improve reliability.
Now use Carbon Copy Cloner to clone the 500GB Lion + Lion Recovery Partitions to the internal 750GB, it will "fix" things and place Lion Recovery at the bottom of the drive where it belongs, give all the extra space to OS X Lion.
Next your going to have to follow WinClones instructions to restore your Bootcamp, likely you will have to recreate the Bootcamp partition first (in Bootcamp) to the size you want and then clone. Likely Winclone may "fix" Windows to recognize it's in a new larger partition now. I don't know you'll have to check as I haven't used it.
When Bootcamp creates the partition it will place it near the bottom next to the Lion Recovery Partition.
As you know you will have to re-validate Windows with Lord Redmond or it expires as you changed the hardware.

Can't see Windows 7 Boot Camp partition from Mac

I've had a Win7 boot partition on my 2011 MBP for a while and it boots just fine. I have a Mac boot partition, a Mac data partition, and a NTFS Win 7 partition. But the Boot Camp partition is greyed out and invisible when booted in to the Mac.
When in Windows, I can see and use the Mac partition from Win7 with MacDrive. The problem is that I cannot see the Windows partition from the Mac. I have Paragon NTFS for Mac installed as well as MacFuse. I tried to see the partition with CampTune and got this error:
I also tried going to the BootCamp Assistant and saw this:
Yet when booted in Windows, I see the Mac partition just fine.
Here is the disk info from terminal:
Uptime: 11:57 up 3 days, 12:28, 2 users, load averages: 0.56 0.56 0.64
~ > sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1465149167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640   469926800      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
   470336440      262144
   470598584   699733064      3 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
1170331648      262144
1170593792   294553600      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
~ > sudo fdisk /dev/disk0
Disk: /dev/disk0          geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 469926800] HFS+
3: AF 1023 254 63 - 1023 254 63 [ 470598584 - 699733064] HFS+
*4: 07 1023 254 63 - 1023 254 63 [1170593792 - 294553600] HPFS/QNX/AUX
~ >
Does anyone know if I can repair this without having to re-format? I have a 13" White MacBook as well and this setup works just fine. I did it such a long time ago that I forgot how I did the first one.
There is another thread on here that similar but not quite like my problem because I ca actually boo into Windows.
If anyone can help it would certainly be appreciated!
Thanks,
Randy

go to --------http://www.cnet.com/news/boot-camp-partitions-not-working-after-installing-os-x- lion/#postComments
just disable your ntfs software --- no need to uninstall

How to adjust Boot Camp partition for more Mac space?

Hello,
TLDR Version:
When I setup Boot Camp, I intended to stay in Windows. I’ve now migrated to Mac and want more disc space allocated to it. How can I adjust this in Boot Camp without deleting and reinstalling Windows?
Extended Version:
I have had a 21.5” iMac for right at a year now, and have been running Windows 95% of the time prior to last week. I decided that I was spending more time on the Mac partition and deciding that it was better in my eyes than Windows, and decided to install all of my productivity software (Microsoft Office/Adobe Creative Suite) on it in an effort to wean myself off of Windows.
Unfortunately, when I set the computer up, I did a 90/10 partition install of Windows on Boot Camp, with 90% of the disc space being allocated to Windows. Obviously, this will no longer work for me, and working from my files in the Boot Camp partition is both limited, and irritating. I would like to adjust the partition the other way; probably an 85/15 partition with the 85% being Mac OSX and the remainder being Windows. Because Mac OSX is the boot disc, it appears as though it can be made smaller, but not larger in Boot Camp.
1. Is there a way to adjust the partition size without having to delete the Windows partition and reinstall?
2. Is the Airport Time Capsule a suitable device to temporarily dump my data on while I adjust the partition? I’ve got 99% of my data on a separate external HDD from a data backup a month ago, but would rather not have to make another backup.
I appreciate any information.
Best regards,
Ryan

Ryan M Smith wrote:
1. Is there a way to adjust the partition size without having to delete the Windows partition and reinstall?
You may want to look at Winclone or Camptune. There is Gparted/Live CD for the adventurous souls.
2. Is the Airport Time Capsule a suitable device to temporarily dump my data on while I adjust the partition? I’ve got 99% of my data on a separate external HDD from a data backup a month ago, but would rather not have to make another backup.
Time Machine cannot backup Windows. It will only back up OS - Mac Basics: Time Machine backs up your Mac - Apple Support.

Does Winclone still work to restore a Boot Camp partition?

I have a 50GB Boot Camp partition, NTFS file system, with Windows XP. My computer is a Mac Pro running OS X 10.6.5. I have been using Winclone to clone the Boot Camp partition as a backup. I know that Winclone is no longer supported, and have heard that Winclone may not work properly with Snow Leopard.
I have no problem creating an image of the Boot Camp partition using Winclone. I have not yet had to do a restore to a new partition, but assume that some day I may need to do so.
My question is: Has anyone running Snow Leopard successfully used Winclone to restore a Boot Camp partition?
A secondary question: Is there any other utility, running on the Mac side, that will clone/restore a Boot Camp partition?

coruscate wrote:
I have the Winclone backup, but I am unclear how to restore it.
Using Winclone, I can select the Image to restore.
When I click on Mount, Winclone puts a disk image of the partition on the desktop.
When I select the desired partition in Destination and click Restore, it tells me "No Windows Partition Found."
Has anyone done this? Can you give me any advice about how to complete the restore?
Good luck to you. I am trying to transfer/migrate my Bootcamp partition (XP pro, FAT32) to a larger HD. I tried Winclone, and like you could create an image, but am unable to restore it on the new drive. I get the same error that you do. I tried creating a Bootcamp partition, rather than having Winclone do it, but would get this error in the log:
Source image volume size is not an exact multiple of 1 MiB
This happened whether I used Bootcamp Assistant or Disk Utility to create the partition, and it didn't matter whether I used a larger partition size or attempted to match the existing one. Apparently Winclone measures the block-sizes differently than Finder, Terminal, or any other measurement that I have used reports.
I've read about suggestions to turn my old FAT-32 Bootcamp Parition into an NFTS one, but I'm loathe to do that since I have on idea if that will work.

Mac pro boot camp partition cloned to MBP?

i have a 200 GB mac pro boot camp partition with windows 7 on it and between setting it up and getting all my software customized it has been like doing time in a soviet gulag.
if i create a 200 GB partition on my MBP can i clone this from one machine to another?
it would save me a heck of a lot of time and aggravation
TIA
p.s not sure if this makes a difference but my mac pro is a first generation deal that required amy burning a image to disk or something along those lines...

Do you know what I do to get 10.5?
Purchase it if the computer doesn't include it.
Also, I don't understand why the drivers are going to be on older software that doesn't have Boot Camp bundled with it.
The drivers are not on a Mac OS X 10.4 CD or DVD. They are on the Mac OS X 10.5 DVD.
Leopard has Boot Camp bundled with it doesn't it? Isn't part of the deal upgrading and improving the drivers?
Yes.
You say in the above "or use up a Windows installation"
This only applies if the Windows disk or license agreement allows you to create a limited number of installations.
Are you saying here that I could also reformat the drive with XP on it?
You could, but there is little reason to do so.
Do I have to reconfigure my workspaces if I do the second option above?
If you erase the Windows partition, yes.
(30311)

Lost Boot Camp Partition in my Mac , I can´t install OS X Leopard in my iMac

Lost Boot Camp Partition in my Mac , I can´t install OS X Leopard in my iMac. Thank You

Impossible to answer with information provided

Can I delete the mac partition used to create the boot camp partition?

I am using Mac OS 10.9.5 on a late 2011 17" Macbook Pro.
I currently have an SSD in the primary drive slot with my primary Mac partition and an HDD in the Superdrive slot that has one unused Mac partition that I would like to delete and a Windows 8 partition that I would like to keep.
Can I delete the extra Mac partition on the HDD so I can use that as spare space? It was the Mac partition that was used to run Boot Camp and create the Windows 8 partition that is on the same drive so I am nervous that the Windows 8 partition needs to rely on that Mac partition to work for whatever reasons.
I recently went through a huge ordeal to create a Windows 8 Boot Camp partition as I wanted it on my computer. I had previously taken out the Superdrive and replaced it with a data doubler and the original hdd, and I had an aftermarket SSD in the primary drive bay. I had been using the SSD as my Mac partition and the HDD as spare storage space. For my Boot Camp config, I wanted to split the HDD into 2 partitions and make one Windows 8 and the other spare storage space while keeping the SSD dedicated to my Mac partition. Achieving that required removing the SSD, removing the data doubler, reinstalling the Superdrive, putting the original HDD back in the primary drive slot, installing and updating Mac OS on the HDD, using that Mac install to run Boot Camp and create a second partition for Windows 8, installing Windows from the Superdrive, and then putting everything back by taking out the Superdrive, putting the HDD back in the data doubler, and putting the SSD back in. Everything works now. Understandably I don't want to break anything and have to redo this process.
That said I do want to delete that extra Mac partition and use it as extra storage, if I can do so without breaking the Boot Camp Windows 8 partition.

ilovemac wrote:
Use Disk Utility and remove the "BOOTCAMP" partition. Then make "Macintosh HD" all the way to the bottom to regain space.
Wrong advice. Do not use Disk Utility. Use Bootcamp Assistant to remove the Bootcamp partition and return the drive to a single OSx partition. Using Disk Utility will result in lost space, lost data, and possibly an unusable OSx partition. Read the Bootcamp help and user guides.

Boot Camp Partition Missing after shrinking Mac Partition

Hello Chris I have a OSX 10.9.2 running all upgrades, Powerbook 2.3g i7 16 GB , Had a boot camp partition of 49 GB, running windows 7 all working fine.
Decided to bump the windows 7 to 100 GB. Used disk utility to decrease the mac partition to 401.6
Image of the way it is now.
The Gray part is what is from the apply done the original time.
After I hit apply. I then restarted and tried to enter boot camp by holding down the altOption key as usual but only the OSX and the Recover partition where there No Windows.
NOTE: did the Windows 7 partition increase from 29 to the 49 GB before this same way and everything worked fine for over a month till i decided to double the partition to 100GB.
In the preferences the Mac Hd only shows up, no network or windows.
Network does show up when holding down altOption Key
Saw that you might be the best help I would like to talk to you and get your Genus going
After I hit apply. I then restarted and tried to enter boot camp by holding down the altOption key as usual but only the OSX and the Recover partition where there No Windows.
NOTE: did the Windows 7 partition increase from 29 to the 49 GB before this same way and everything worked fine for over a month till i decided to double the partition to 100GB. 2. In the preferences the Mac Hd only shows up, no network or windows. 3. Network does show up when holding down altOption Key
Saw that you might be the best help I would like to talk to you and get your Genus going
I ran the Items below as you have asked in the past.
Last login: Fri Jun 27 15:02:59 on ttys000
Kens-MacBook-Pro:~ Ken$ sudo gpt -r -v show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=500277790720; sectorsize=512; blocks=977105060
gpt show: /dev/disk0: Suspicious MBR at sector 0
      start       size index contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6
         40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640 784379648      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
784789288    1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
786058824   95345080
881403904   95700992      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
977104896        131
977105027         32         Sec GPT table
977105059          1         Sec GPT header
Kens-MacBook-Pro:~ Ken$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 60821/255/63 [977105060 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [    409640 - 784379648] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 784789288 -    1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 881403904 -   95700992] Win95 FAT32L
Kens-MacBook-Pro:~ Ken$
What to do Next ?

Chris I just did what Loner T said
sudo fdisk -e /dev/disk0
setpid 4
07
flag 4
write
I then restart and now I can see the windows partition after on restart and altOption down.
But it then gives a error can't find drive or something like that.

Can i "copy" a 200 GB boot camp partition from Mac Pro to MBP?

i spent a lot of time working with virtual machines and i have decided i simply have to increase the size of my mac pro HD and put a boot camp partition in it.
can i COPY a 200 GB windows 7 boot camp partition from my 1 TB Mac Pro drive to a 200 GB partition on my MBP that will have a 500 GB drive?
this would let me focus on doing a full install and full setup on the Mac Pro and just copy this over to the MBP (when i get the new drive) saving me a ton o time.
TIA
Also, is this something for WinClone?

hi kappy. THANK YOU.
is it possible that you or anyone has actually done this machine to machine and partition to partition?
i want to avoid a situation where i try to do this only to find it works better or is much simplyer to the the fresh install on the MacBook Pro just fresh.
- jon

Mac HD unmounted; Boot Camp partition still available

Similar Messages

Maybe you are looking for