Mac intel pro won't recognize snow leopard installation dvd

i have a dual-core intel xeon with 6 GB memory. the dvd player reads all cds and dvds except when i insert the cd to install snow leopard, it ejects the disk. this is the second disk as i exchanged for a new one at apple store (where it was recognized on the computer there) any ideas, i really want to get going on CS5. helllllp (presently running version 10.4.11

Most likely it's a hardware problem: meaning the media drive ("dvd player" is the name of the movie playing software in Applications) is either dirty or defective. A reasonable first step would be to blow canned air through the drive. If that doesn't solve the problem, then try a recommended-by-Apple media drive cleaning kit. Also test the 10.6 installer disc on another media drive to see if "any" media drives can detect it.
Report back on results, please.

Similar Messages

  • Mac keep shutting down after cancelling Snow Leopard upgrade DVD

    Hello,
    I tried to upgrade my computer with the Mac OS X Snow Leopard DVD. The upgrade failed twice, so I decided to quit it and to restart my computer with hardware, but then, it doesn't run more than 35 sec and then shuts down automatically. I have tried 5 times to restart it, but it shuts down even before I can see my desktop. Ho yes, and I ejected the DVD from it.
    ...help please! : )
    Thank you!

    Sounds like you've damaged your system by forcing it to quit and restart in the middle of installing. You probably also had something wrong with your machine that was interfering with the installation in the first place, as the Snow Leopard installer is ordinarily pretty good at failing without damaging anything if something causes it to fail.
    I would advise [repairing the hard drive with Disk Utility|http://support.apple.com/kb/TS1417]. If that fails, you'll need to erase and repartition the hard drive and reinstall Snow Leopard from scratch. If repair works, but you still can't boot, you probably have corruption in important system files. You could try installing Snow Leopard over it at this point, while booted from the Snow Leopard disk. If repair shows no problems, post back here, as you've got something a little more exotic than simple hard disk damage going on.
    Do you have a backup? If not, it's possible all your data might be gone at this point, depending on what exactly has gone wrong with your computer. You can try to back up from Disk Utility running from the Mac OS X install disk... see the Restore tab. You'll need an external hard drive to which to copy.

  • Macbook Pro won't install Snow Leopard

    I am having trouble installing Snow Leopard on my Macbook Pro. I currently have Leopard 10.5.8 installed. I contacted Apple after my first issue. The tech support person decided I had a bad DVD & sent me a new copy, but the issue remains the same. When I try to upgrade I get as far as approving the user agreement and then the installation screen disappears. I tried installing using the DVD as the start-up as recommended in the installation instructions. When I do this I get as far as selecting the destination, but the hard drive has the yellow triangle with the exclamation point and says Mac OS 10 can't start from here. I have used the Disk Utility & Disk First Aid to check my hard drive & it checks out ok. Any ideas what I should do?

    You could try doing what I call a repair install of Leo--installing Leo over Leo via upgrade. It is possible that you can reinstall Leo this way, and your problem will be fixed, even though you can't install Sno (yet). Also, you could try the Leo install from your desktop rather than having started to the DVD. I can't assess the probability that using this technique will solve your problem. I think it definitely is less than 50%. And, I emphasize that you may not even be able to do the repair install.
    Message was edited by: donv (The Ghost)

  • Snow leopard installation dvd keeps ejecting on Mac Mini

    HI,
    I have a Mac Mini, 1.83ghz, intel core duo, 2gb 667mhz DDR2 SDRAM running OS Leopard 10.5.8.
    Im trying to install snow leopard from the dvd onto the mac and it keeps ejecting it.
    It wont even mount on the desktop, can anyone help?
    Ive restarted holding the 'c' key but it still ejects the dvd. The dvd doesnt look damaged or scratched either and have disconnected all my peripherals as well.
    Cheers Pete

    Pete,
    This may sound so simple but it may be the problem.  Unplug your USB keyboard and just plug in your mouse.  Then insert the DVD.  If it stays in, you have a sticky key on the keyboard.  Cleaning your keyboard may be all that it takes.
    Otherwise, your optical drive is not recognizing the platter and you have more serious issues.  Rule out the easy and obvious first.
    Jim~

  • Mac Mini core solo 1.5gb snow leopard installation problem.

    Before I tried to install snow leopard I was in the middle of using the restore discs and before I was thinking about it I just turned the computer off when it asked for disc 2. Now I cannot do anything with this computer, turning it on goes to the installation menu and It just prompts for the second disc which I do not have. All my menus are disabled such as disc utility and can't start a fresh install. Also when I turn the computer on and hold the alt key down with a usb keyboard I do not get the option of selecting the snow leopard disc when the option of the hard drives come up. It just ejects the discs. Also tried holding down the C key to boot from dvd and no luck. Any way to get around this or another command to try?

    Sounds like your optical drive went out. Either get it fixed or use an external USB CD/DVD drive. You might try another disc first to eliminate a problem on your install disc. Sometimes scratches and finger prints on a disc can cause problems.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Does anyone know where to obtain snow leopard installation dvd?

    I recently went to apple store and asked if they sell the snow leopard dvd installation, but they said it should be available on the apple website. However i could not find the installer... does anyone knows where to buy? (not from ebay and amazon). Also, if you guys have one, could you guys gladly offer me one?:)

    If you need to purchase Snow Leopard, you can still purchase a copy from Apple's online store's telesales agents.[1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775.] Ask for a Sales Representative.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    If you need to purchase Lion call 1-800-692-7753 or 1-800-676-2775. Ask for a Sales Representative. They will check your Apple ID, and email you a code and instructions.  The cost is $29.99 (as it was before) plus tax.  It's a download.

  • Spinning wheel spins but Mac Book Pro won't boot - got stuck there!- II

    Right.
    Last week I had this problem and I posted it in the forum:
    +"I have been using my MacBook Pro since last summer ans installed Snow Leopard a coiuple of months ago or so. No problem whatsoever. However, an hour ago, the computer crashed whan I was viewing a web site. I waited and waited. I then tried to Force Quit, but nothing happened. So at lats I was obliged to shut down using the power button (holding it till shut down)+
    +When I tried to reboot, the grey screen with the apple appeared as well as the spinning wheel. The latter kept on spinning and spinning but to no avail. I tried safe booting, same result. I booted holding cmd option P R, nothing. I tried single user, and no result.+
    +Shall I boot from the Snow Leaopard DVD installation disk?"+
    The problem was solved by booting from the Snow Leopard Installation DVD. Then I updated the system with the "10.6.2 combo updater", and it worked fine for a couple of days.
    *But an hour ago I tried to start my MacBook Pro and the spinning wheel issue started again. Only this time I can't jump start it with the Installation DVD of Snow Leopard. It seems to read the disk but doesn't actually boot. Remains on a blank screen the follows the spinning wheel one and simply remains inert there...*
    Very frustrating. Any hints?

    It's quite possible. Many people who upgrade then have problems usually had problems before the upgrade. The upgrade merely made them worse. For future reference:
    System Upgrade and Installation Procedure
    Basic Caveats
    1. Disconnect all peripherals except the original mouse and keyboard.
    2. Quit all applications if this is not an installation from an Installer DVD.
    3. The installation process should not be interrupted. If a power outage or other interruption occurs during installation you may have to erase the hard drive and reinstall from scratch.
    4. Once the installation begins do not use the computer in any way except to reply to dialog prompts or to restart when the installation is completed. This is especially critical during the installation stage known as "Optimizing the System."
    System Update Procedure
    A. Repair hard drive and permissions.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.) After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.2 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. Note that Disk Warrior will not work on Intel Macs.
    B. Clone your existing system to an external Firewire drive.
    How to Clone Using Restore Option of Disk Utility
    1. Open Disk Utility from the Utilities folder.
    2. Select the startup or source volume from the left side list.
    3. Click on the Restore tab in the DU main window.
    4. Drag the startup or source volume to the Source entry field.
    5. Select the backup or destination volume from the leftside list and drag it to the Destination entry field.
    6. Check the box to Erase Destination. Skip this step if you've already formatted the drive.
    7. Double-check you got it right, then click on the Restore button.
    C. Decide upon an installation option.
    You have three upgrade options. If you use the Upgrade installation option be sure you have repaired the hard drive and permissions first and made your backup. If you choose the Archive and Install option then you only need to repair the hard drive.
    Neither of the above options will erase the disk. Some of your software may not work with a new system. You will need to upgrade those programs. It would be best to do the upgrades to your software before upgrading to the new system version.

  • Does "Archive and Install" really exists on the Snow Leopard install DVD  ?

    Well, Mr Magoo really needs your help.
    I have an iMac late 2009 edition and the Snow Leopard DVD installer discs.
    Reading the little baby paper book manual that came with the discs and the iMac it says on page 54 that i can re-install Snow Leopard by choosing "Archive and Install" or "Erase and Install".
    Mr Magoo just can't find that "Archive and Install" choice and have concluded that this is a very bad reprint of a manual from years long ago when it was possible to archive and install or it some joke by Apple.
    Unfortunately my 90 days of phone talk to Apple has expired albeit the two year warranty under apple sometimes care program i purchased is still valid.
    Help/suggestions on how i can get to do an Archive and Install with the Snow Leopard installer DVD that came with this iMac ?

    Dave Sawyer wrote:
    You misunderstand what Carolyn wrote. In Snow Leopard, Apple engineered the installer so that any reinstallation over an existing copy is in essence an "archival" install in the sense that it replaces all the OS files while automatically preserving the applications and user settings, just as the old "archive and install" option did, though no longer with the option to not preserve the user settings. So all installations over an existing OS are in essence "archive and install", so Apple removed the extra, now-redundant option.
    They also removed the "Erase and Install" option. The only way you get a "complete fresh" installation is if you use Disk Utility to erase the drive. Otherwise the 10.6 installer will install a new set of OS files but not remove your apps and user settings.
    If you want to reinstall Mac OS X 10.6 and keep your applications and user settings and data, just do a normal installation over the existing one. If you want to do a completely fresh installation, either starting completely new or restoring user data from a backup, first run Disk Utility from the Utilities menu and erase the drive.
    Well, have you tried an Snow Leopard installation on top of a previously installed Snow Leopard.
    I must really be an idiot in using the snow leopard installer.
    I loaded the optical slot with the Snow Leopard DVD installer and after it opened up on the desk top i double clicked the install icon. That restarted my iMac.
    When I launched the installer after selecting my "Language" and then going thru the customization ( for example I don't need all those foreign languages ) and then selecting the drive to carry out the installation the installation starts.
    Upon completion all my third party applications were zapped and i only had the Apple applications. There was no "previous" system folder as there used to be in previous operating system installers.
    So, honestly, I have no idea how you folks manage to make an Snow Leopard installation over a previously installed Snow Leopard whereby all the third party applications are still there.
    Please tell me the steps i should take to make an "archival" install over top of a previously installed Snow Leopard that retains all third party applications.
    After my install of Snow Leopard I had to re-install all my third party software applications which in my case are mainly midi/audio programs.

  • Reinstalling using the Snow Leopard Upgrade DVD?

    This may be a stupid question, but I need to reinstall my Mac, however I only have the Snow Leopard Upgrade DVD that was shipped to me since I the leopard dvd is stuffed somewhere in the back cupboard that I can't find for love nor money.
    Can I erase the hard drive and perform a clean installation from the Snow Leopard Upgrade DVD? I've a feeling that I can't but just wanted to confirm.
    Thanks!

    Hi thelongmile;
    If it is the upgrade DVD then you can't.
    Allan

  • Mac Pro 1.1 running Snow Leopard - itunes upgrade?

    I have a Mac Pro 1.1 running Snow Leopard, my current version of itunes won't let me sync my iphone but it won't let me upgrade to the new itunes either, is there anything i can do?

    First, update Snow Leopard to 10.6.8: Download and install Mac OS X 10.6.8 Update Combo v1.1. Next, download and install iTunes iTunes 11.0.5.

  • Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook Pro running 10.6 (Snow Leopard)?

    Is it possible to install CS5 or CS5.5 on a 2.4 GHz Intel Core 2 Duo 4 GB 667 Mhz DDR2 SDRAM MacBook Pro running 10.6 (Snow Leopard)?

    Hi Carolyn, thanks for your quick reply. First thing I did before posting my question was to check the system requirements for Creative Suite, both on Apple and Adobe's websites. But I am however confused about the difference between "Multicore Intel processor" vs "Core 2 Duo", and keep hearing stories about CS5 not working properly.

  • Can you download OS 7 on a Mac Pro 2009 operating under Snow Leopard

    Can you download OS 7 on a Mac Pro 2009 operating under Snow Leopard and do you need it to use icloud to update Calendar and contacts on your computer

    Upgrading to Mountain Lion - http://www.apple.com/osx/how-to-upgrade
    Your computer meets all system requirements, including RAM?
    Mac OS X: System requirements for Mountain Lion (10.8) - http://www.apple.com/macosx/specs.html
    Lion and Mountain Lion application compatibility - http://roaringapps.com/apps:table

  • Mac Pro won't recognize ethernet connection

    My Mac Pro won't recognize the Ethernet cable when it's plugged in. I know the cable and connection are good because my MacBook Pro recognizes it with no problem. I've had it for around a year, but have always used the airport to connect to the internet. It has two Ethernet ports on the back and I've tried both. Is there anything I need to do to configure the NIC card?
    Thanks in advance!
    Ryan

    No, but you do need to configure the Ethernet port in Network preferences. Open Network preferences and select the Ethernet port. Click on the Advanced button then on the TCP/IP tab. Set the Configure IPv4 drop down menu to DHCP. Set the Configure IPv6 drop down menu to Off. Click on the Apply button. If all is well you should see a valid IP address in the network settings for the port. If you see an IP address starting with 169., then it means your Ethernet port is not getting an IP address from your router. You should have an Ethernet cable connected from the Ethernet port on the computer to one of the LAN ports on your router.

  • Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation. Any suggestions?

    Since upgrading my mid-2010 MacBook Pro from the original Snow Leopard to Yosemite 10.10.2 there have been multiple instances of restart (crash) also slow operation & pop up message stating web content has failed. Any suggestions?

    Many thanks for your interest, I've downloaded & run the app as suggested, report copies & pasted below.
    Problem description:
    Following upgrade from Snow Leopard to Yosemite 10.10.2 machine is slower & suffers from shut down / reboot and closing web pages due to unexpected error
    EtreCheck version: 2.1.8 (121)
    Report generated 6 February 2015 08:40:29 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
        MacBook Pro - model: MacBookPro6,2
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1067 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1067 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 75
    Video Information: ℹ️
        Intel HD Graphics - VRAM: 288 MB
            Color LCD 1440 x 900
        NVIDIA GeForce GT 330M - VRAM: 256 MB
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:13:14
    Disk Information: ℹ️
        Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (134.68 GB free)
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898 
    USB Information: ℹ️
        BUFFALO HD-PVU2 500.11 GB
            EFI (disk2s1) <not mounted> : 210 MB
            Time Machine Backups (disk2s2) /Volumes/Time Machine Backups : 499.76 GB (257.33 GB free)
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    jp.co.buffalo.driver.turbousbhdd (1.0.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.hp.help.tocgenerator.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        Skype    UNKNOWN  (missing value)
        Safari    Application  (/Applications/Safari.app)
        Dropbox    Application  (/Applications/Dropbox.app)
        Android File Transfer Agent    Application  (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
        ConnectService    Application  (/Library/Application Support/ArcSoft/Connect Service/ConnectService.app)
    Internet Plug-ins: ℹ️
        Flip4Mac WMV Plugin: Version: 2.4.4.2 [Click for support]
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
        Silverlight: Version: 4.0.60129.0 [Click for support]
        iPhotoPhotocast: Version: 7.0
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Flip4Mac WMV  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 318.84 GB Disk used: 184.16 GB
        Destinations:
            Time Machine Backups [Local]
            Total size: 499.76 GB
            Total number of backups: 184
            Oldest backup: 2010-12-10 15:37:39 +0000
            Last backup: 2015-02-06 02:49:24 +0000
            Size of backup disk: Too small
                Backup size 499.76 GB < (Disk used 184.16 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             1%    ConnectService
             1%    Skype
             0%    systemstatsd
             0%    launchd
    Top Processes by Memory: ℹ️
        193 MB    Skype
        168 MB    mds_stores
        132 MB    com.apple.WebKit.WebContent
        107 MB    Mail
        99 MB    ocspd
    Virtual Memory Information: ℹ️
        889 MB    Free RAM
        1.99 GB    Active RAM
        455 MB    Inactive RAM
        825 MB    Wired RAM
        1.11 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Feb 6, 2015, 08:27:32 AM    /Library/Logs/DiagnosticReports/com.apple.AmbientDisplayAgent_2015-02-06-082732 _[redacted].crash
        Feb 6, 2015, 08:25:19 AM    Self test - passed
        Feb 5, 2015, 04:37:08 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-163708_[redacted].crash
        Feb 5, 2015, 10:01:02 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-05-100102_[redacted].crash
        Feb 5, 2015, 12:03:59 AM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-05-000359_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 11:58:58 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235858_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 11:54:35 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-235435_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 11:49:03 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-04-234903_[redacted].cpu_resource.diag [Click for details]
        Feb 4, 2015, 09:40:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-214016_[redacted].crash
        Feb 4, 2015, 09:38:12 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-213812_[redacted].crash
        Feb 4, 2015, 09:27:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212756_[redacted].crash
        Feb 4, 2015, 09:25:25 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212525_[redacted].crash
        Feb 4, 2015, 09:20:16 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-212016_[redacted].crash
        Feb 4, 2015, 09:18:10 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211810_[redacted].crash
        Feb 4, 2015, 09:12:54 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-211254_[redacted].crash
        Feb 4, 2015, 08:40:48 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-204048_[redacted].crash
        Feb 4, 2015, 08:22:04 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-202204_[redacted].crash
        Feb 4, 2015, 12:11:35 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-04-001135_[redacted].crash
        Feb 3, 2015, 09:44:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-214433_[redacted].crash
        Feb 3, 2015, 05:40:21 PM    /Library/Logs/DiagnosticReports/HP Scan_2015-02-03-174021_[redacted].cpu_resource.diag [Click for details]
        Feb 3, 2015, 09:05:45 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-02-03-090545_[redacted].crash
        Jan 28, 2015, 06:10:42 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-28-181042_[redacted].panic [Click for details]
        Jan 21, 2015, 10:51:25 PM    /Library/Logs/DiagnosticReports/Kernel_2015-01-21-225125_[redacted].panic [Click for details]
        Jan 20, 2015, 11:12:47 AM    /Library/Logs/DiagnosticReports/Kernel_2015-01-20-111247_[redacted].panic [Click for details]
        Jan 18, 2015, 09:57:31 AM    /Library/Logs/DiagnosticReports/Kernel_2015-01-18-095731_[redacted].panic [Click for details]
    The only observations are that the backup drive is deemed too small and the quite long list of diagnostic reports dated between  Jan 18, 2015 (which I believe is the day I upgraded to Yosemite) & today the latest Yosemite update was installed on Jan 28, 2015
    Any further assistance will be appreciated

  • Snow Leopard installation on Mac Mini has failed

    Hi,
    Does anyone know whether Snow Leopard checks what hard disk is installed in order to satisfy installation requirements as I've fitted an SSD Hard Disk Drive in my Macintel Mac Mini and installing Snow Leopard has failed (no longer boots into any Operating System previous nor upgraded. (Mac OS X 10.5.8 previously installed)).
    Thank you for any advice.
    Best Regards.

    It may not have anything to do with a new drive installation. Snow Leopard has just "bricked" my Intel Mac Mini hard drive - the original one. The first attempt at installation failed, so I tried an erase and instal. It seemed to work - briefly but when I tried to restore apps and settings from a Time Machine back-up it "hung" with only one minute of restoration to go. Now the HD appears to have failed, since it is unable to find any system folder and booting up via the Snow Leopard disc and bringing up the disc utility shows a greyed-out HD drive.
    Some people on the MacBook Pro forum report a similar problem with the hard drive after Snow Leopard installation.

Maybe you are looking for