Mac keeps restarting after install
Ok my mac has been running really slow for about a year, I've tried all sorts but always getting the scrolling wheel, I'm on mountain lion and installed the original install disc leopard and clicked install, it's now turning itself off over and over again for the past hour is this normal? I have nothing on there I want to keep it's all backed up, will it reboot soon, cheers
CCould this be the wrong Install Disc for this Mac?
Hold alt key at bootup, what choices does it show?
Oh, do you have Firmware Protection set?
Firmware password protection in Mac OS X ...
http://support.apple.com/kb/HT1352
It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option boot will show a lock, and Shift, as well as booting from anything but the Hard Drive.
Similar Messages
-
Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks
Hello,
my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
Specs for Mac Pro Mid 2010:
- 2 x 2.66 GHz 6-Core Intel Xeon
- 14 GB 1333 MHz DDR3 ECC
- ATI Radeon HD 5770 1024 MB
- OS X 10.9.2Hello Linc,
I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing" more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
STEP 1 - BOOT_TIME:
8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded ***
8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
STEP 2 - SYSTEM DIAGNOSTIC REPORT:
Tue Aug 12 19:30:48 2014
panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81c98d38a0 : 0xffffff801f822f79
0xffffff81c98d3920 : 0xffffff801f8dc24e
0xffffff81c98d3af0 : 0xffffff801f8f3746
0xffffff81c98d3b10 : 0xffffff801fc51e48
0xffffff81c98d3c40 : 0xffffff801fc8bffe
0xffffff81c98d3c80 : 0xffffff801fc8c1fd
0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
0xffffff81c98d3d10 : 0xffffff7fa0144068
0xffffff81c98d3d70 : 0xffffff7fa0142c85
0xffffff81c98d3da0 : 0xffffff7fa0141646
0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
0xffffff81c98d3e20 : 0xffffff7fa0140b8b
0xffffff81c98d3e50 : 0xffffff801fc956ef
0xffffff81c98d3ea0 : 0xffffff801fc952af
0xffffff81c98d3f30 : 0xffffff801fc90e89
0xffffff81c98d3f70 : 0xffffff801fc95e03
0xffffff81c98d3fb0 : 0xffffff801f8d7417
Kernel Extensions in backtrace:
com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x000000001f600000
Kernel text base: 0xffffff801f800000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26153387208
last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver 124 (addr 0xffffff7fa10fa000, size 20480)
loaded kexts:
com.Cycling74.driver.Soundflower 1.5.1
com.motu.driver.PCIAudio 1.6 58373
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
com.apple.AMDRadeonX3000 1.2.4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleLPC 1.7.0
com.apple.kext.AMD5000Controller 1.2.4
com.apple.driver.AppleIntelMCEReporter 104
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.iokit.SCSITaskUserClient 3.6.6
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.Intel82574L 2.6.2b1
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleUSBHIDKeyboard 170.15
com.apple.driver.AppleHIDKeyboard 170.15
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.6.6
com.apple.iokit.IOUSBMassStorageClass 3.6.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.pthread 1 -
Computer keeps restarting after installing windows 8
Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped
We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag. -
My Mac keeps restarting after Mountain Lion install
In installed Mountain Lion and now my Mac keep rebooting. I am getting an error that there is a problem with starting up. I am able to access my computer by using safe mode but as soon as restart it, it keeps rebooting once again. Please help.
com.trendmicro.kext.KERedirect
com.globaldelight.driver.BoomDevice
The trendmicro kext is likely the problem. Don´t know about the other one. You can probably start up in Safe Mode (boot with Shift-key) and uninstall the app from there, or check if there is an update to the program.
https://discussions.apple.com/message/19042643#19042643#19042643
Boot on Safe Mode and then go into the library and get rid of TrendMicro files. There are other threads right now on this so do a quick search and give it a try. -
My Mac Pro keep restarting after install OSX Mountain Lion!
I had start up errors, took forever to start they keep restarting again and again.
How can I fix this problems?
Thx!!smc reset
fixes (should fix) random shut downs and sleep
http://support.apple.com/kb/HT3964
it is not that, then an app may be crashing causing the OS to crash and then you may have a setting that restarts your computer should it crash.
You might also want to attempt a reinstall from the recovery partition
To get to the recovery partition restart your computer, hold CMD+R down when you hear the boot up chime. Open Disk Utility first (verify your boot disk and repair if needed) and then close it and reinstall ML. -
Mac stuck restarting after installing Yosemite
My 2011 MBP has been stuck "restarting" for about an hour now after installing Yosemite. The striped loading bar is grey and stationary but the charcoal circle is spinning underneath. Any suggestions? Do I leave it run overnight and call support in the morning? Thankfully this happened after Midterms, but I'm afraid I'll lose everything if I turn it off. (I decided to upgrade on a whim...I know...and the last backup is from the beginning of the summer. :/ )
Same thing happened to me - except, of course, that I made a back-up before installing Yosemite. I could not get my machine to boot - it would get stuck exactly the same way as yours. I tried for hours - and nothing...
I finally wiped my HD and used time machine to install my latest back-up. Without such a back-up, I don't know what options you have. Your best bet is probably this:
Gray, Blue or White screen at boot, w/spinner/progress bar -
Mac keeps restarting after being asleep
Safe mode tried and fine,reinstall and back up completed and yet still getting a restart after screen saver has been activated. I have been onto Apple who are none the wiser after repair disk etc, still no luck!
Please help!?If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Mac keeps restarting before installing windows
I used bootcamp to make a partition of 200gb for windows, when i clicked install in bootcamp my mac restarted and started installing windows xp. When it is finished it again reboots. Than i cant choose between my windows or my mac partition and the whole installation which i already finished before starts over again...
After some research I saw people with the same problem, they just had to be patient when it says 'press any key to continue'. But when I do not even touch my keyboard it just go's on and installs windows again..
I as well tried to boot my OSX at the startup by holding the option key, this didn't seem to have any affect. I tried lots of different ways but it just does not work. I have the small wireless keyboard without the number pad on the side. I as well tried it with a USB windows keyboard...
So it would be awesome if someone could help me with or finnally correctly instal windows or that i just can start my normal Mac OSX system again.
Im sorry for my bad English, hope you understand what I'm trying to say.XP is no longer supported. Some versions of XP SP3 would wipe out entire drives.
OS X Lion 10.7 only supports Windows 7 or later.
XP would be fine in virtual machine like Parallels or Fusion or VirtualBox
27" imac has a special tech note article (also all the FAQ etc is here too):
http://www.apple.com/support/bootcamp/
http://support.apple.com/kb/HT1999
http://support.apple.com/kb/HT3986
http://support.apple.com/kb/HT3777
http://support.apple.com/kb/TS3173
http://www.pcpro.co.uk/blogs/2009/10/26/how-to-install-windows-7-onto-the-new-27 in-imac/comment-page-1/ -
Nokia 603 keeps restarting after installing FP1 Up...
hey i just installed FP1 update using nokia suite, everything went smooth but my phone isnt getting up just booting again and again after intervals, please help fast
after a lot of research finally updated to fp1 successfully .update is not available here via nokia suite.
after tagging this post i downloaded the update again and faced the same problem as i said. i removed the sim card and memory card. then i switched the power button and surprisingly my phone started to take update !!!!!!!!!!!!!!!!!!!!!!!!!!!!
i dont know how, but it took update. enjoying it. this is just more than ossum and apps are working perfectly except x-plore. -
Finder froze, restarted. Now keeps restarting after boot.
Hi!
The title pretty says it all.
Finder froze completly, and I forced a restart. After the restart it keeps restarting AFTER boot. By that I mean after getting into the desktop.
Any ideas?
Tried a few things my self, but it just keeps restarting..
Got a Mac mini, can the macbook somehow boot from that? I just need the data from the harddrive!I could not find anything the direction I was going. OK, you can start from your DVD. What happens if you just click install? If you are able to install, then your would be installing Sno over Sno, as if doing an upgrade install, in an attempt to fix your Sno installation. In principle, your files, users, apps, and settings would not be affected. But,before trying this sort of install, you will need to resolve the issue of what sort of backup you have. Most importantly you may have important unbacked up files. If so, then you might be better off going to a data recovery specialist before trying to reinstall Sno over Sno.
-
Ipod touch 4th gen needed a new screen and sleep/wake switch. So, I replace them. I was able to get to settings and do "erase all content and settings". I am not able to totally shut this device off as it keeps restarting after a few seconds. I have used itunes to restore and also recover. Device will actually shut off and stay shut off if I leave it connected to the computer. The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not. Just cant get it to completely shut down unplugged. Any thoughts?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
Apple will not help since you worked on the iPod yourself. -
HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7
Hi Forum Experts, hope all is well. Hopefully someone will be able to help me with this problem.
My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.
I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups. I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered.
The screen goes blue and this is the message I get when it crashes and restarts.
Problem has been detected and windows has been shut down to prevent damage
to your computer.
attempt to reset the display driver and recover from timeout failed.
if this is the first time you've seen this stop error screen,
restart your computer, if this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select safe mode.
Technical Information
*** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
*** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk:
the message is also slightly of to the left it really reads like this.
Problem has been detected and windows has been shut down to prevent damage
o your computer.
ttempt to reset the display driver and recover from timeout failed.
f this is the first time you've seen this stop error screen,
estart your computer, if this screen appears again, follow
hese steps:
heck to make sure any new hardware or software is properly installed.
f this is a new installation, ask your hardware or software manufacturer
or any windows updates you might need.
f problems continue, disable or remove any newly installed hardware
r software. Disable BIOS memory options such as caching or shadowing.
f you need to use safe mode to remove or disable components, restart
our computer, press F8 to select Advanced Startup Options, and then
elect safe mode.
echnical Information
** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
ollecting data for crash dump ...
nitializing disk for crash dump ...
eginning dump of physical memory.
umping physical memory to disk:
Once windows is fully rebooted all pages, and the display look ok, until it crashes again. I searched for updated drivers on the HP and Windows site but could not find any. The one that is currently installed is called (Generic Pnp Monitor).
Thanks in advance for your expert advice.
Juan.Thank you for the additional information.
Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible? There may be a problem with compatibility. Also, which version of Win 7 are you running; 32-bit or 64-bit?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
My iPhoto keeps crashing after installing the latest update, can't do anything!
My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If iPhoto crashes while trying to create a new library then try this:
Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all relavant updaters.
P.S. If you're still running Tiger, 10.4.6, then the above may not apply. If you're running a newer system you should update your profile so we have a better idea of where you're at.
OT -
Mac keeps rebooting after upgrading to Mavericks from Snow Leopard
Hi, I have upgraded my Mac to Mavericks (Mid 2010) from Snow Leopard and my Mac keeps restarting itself, not sure what the cause is, can any help? Thanks
Here is the error message I get:
Anonymous UUID: EB50AA11-2803-1B21-F027-853513903D23
Fri Oct 25 22:20:56 2013
panic(cpu 3 caller 0xffffff7f8911bfac): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff811b082000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff80f72ead50 : 0xffffff8006c22f69
0xffffff80f72eadd0 : 0xffffff7f8911bfac
0xffffff80f72eaea0 : 0xffffff7f877cb53d
0xffffff80f72eaf60 : 0xffffff7f87897d9e
0xffffff80f72eafa0 : 0xffffff7f87897dfc
0xffffff80f72eb010 : 0xffffff7f87b1c5be
0xffffff80f72eb140 : 0xffffff7f878bbd41
0xffffff80f72eb160 : 0xffffff7f877d208d
0xffffff80f72eb210 : 0xffffff7f877cfbae
0xffffff80f72eb410 : 0xffffff7f877d14d7
0xffffff80f72eb4e0 : 0xffffff7f887bbffd
0xffffff80f72eb660 : 0xffffff7f887bba03
0xffffff80f72eb670 : 0xffffff7f88780cd0
0xffffff80f72eb680 : 0xffffff7f88780d45
0xffffff80f72eb690 : 0xffffff7f88762b11
0xffffff80f72eb6d0 : 0xffffff7f88765085
0xffffff80f72eb700 : 0xffffff7f887b5b50
0xffffff80f72eb780 : 0xffffff7f8879dcc0
0xffffff80f72eb7e0 : 0xffffff7f8879e5ba
0xffffff80f72eb830 : 0xffffff7f8879eaa0
0xffffff80f72eb8a0 : 0xffffff7f8879f1a8
0xffffff80f72eb8e0 : 0xffffff7f8876c1ca
0xffffff80f72eba60 : 0xffffff7f8879bb20
0xffffff80f72ebb20 : 0xffffff7f8876acb9
0xffffff80f72ebb70 : 0xffffff80070cc226
0xffffff80f72ebb90 : 0xffffff80070cd821
0xffffff80f72ebbf0 : 0xffffff80070cb28f
0xffffff80f72ebd40 : 0xffffff8006cb6008
0xffffff80f72ebe50 : 0xffffff8006c26bb1
0xffffff80f72ebe80 : 0xffffff8006c139b5
0xffffff80f72ebef0 : 0xffffff8006c1e003
0xffffff80f72ebf70 : 0xffffff8006cc921d
0xffffff80f72ebfb0 : 0xffffff8006cf3e26
Kernel Extensions in backtrace:
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.53 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x859B, 0x435435313236344243313036372E4D313646
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.0f6 12982, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST9500325ASG, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
FireWire Device: Rugged Safe, LaCie, Up to 800 Mb/sec
Thunderbolt Bus:
Maybe you are looking for
-
A recent movie purchased on iTunes and downloaded to my computer does not show up on apple tv.
I routinely buy movies on iTunes and they usually show up on apple tv automatically but the most recent purchase is not there. Im not sure why.
-
Problem using standard libraries in C++ class
Hi I am new to JNI. I am having problems using standard C++ library. My java code looks like public class JavaSide { public native void sayHello(); static { System.loadLibrary("NativeSideImpl"); public static void main(String[] args) { JavaSide app =
-
URGENT TO FIND JDEVELOPER DIRECTORY ON REDHAT LINUX
Sir I have office website on redhat linux,jdeveloper10g using websphere and struts and ejb.We are not getting directory structure and location website files(public_html)f i find it i can maintain and update it. can the website files be transferred on
-
Multiple Computers and iPhone and iPods
I have 3 computers Desktop PC-XP at work, Laptop PC-Vista, and Desktop PC-XP at home. I also have an iPhone, 2 iPod touches (for each of my sons) and an iShuffle. I want to copy/share any music/video/apps with each device wherever i am. I have author
-
Shutting down jvm from activex bridge
How can I shut down the jvm from my bean packaged as an activex control. Calling System.exit is crashing the host as well.