Mac keeps restarting before installing windows

I used bootcamp to make a partition of 200gb for windows, when i clicked install in bootcamp my mac restarted and started installing windows xp. When it is finished it again reboots. Than i cant choose between my windows or my mac partition and the whole installation which i already finished before starts over again...
After some research I saw people with the same problem, they just had to be patient when it says 'press any key to continue'. But when I do not even touch my keyboard it just go's on and installs windows again..
I as well tried to boot my OSX at the startup by holding the option key, this didn't seem to have any affect. I tried lots of different ways but it just does not work. I have the small wireless keyboard without the number pad on the side. I as well tried it with a USB windows keyboard...
So it would be awesome if someone could help me with or finnally correctly instal windows or that i just can start my normal Mac OSX system again.
Im sorry for my bad English, hope you understand what I'm trying to say.

XP is no longer supported. Some versions of XP SP3 would wipe out entire drives.
OS X Lion 10.7 only supports Windows 7 or later.
XP would be fine in virtual machine like Parallels or Fusion or VirtualBox
27" imac has a special tech note article (also all the FAQ etc is here too):
http://www.apple.com/support/bootcamp/
http://support.apple.com/kb/HT1999
http://support.apple.com/kb/HT3986
http://support.apple.com/kb/HT3777
http://support.apple.com/kb/TS3173
http://www.pcpro.co.uk/blogs/2009/10/26/how-to-install-windows-7-onto-the-new-27 in-imac/comment-page-1/

Similar Messages

  • Computer keeps restarting after installing windows 8

    Can you help my computer keeps restarting after I installed Windows 8?  I have the minidump file zipped

    We do need the actual DMP file as it contains the only record of the sequence of events leading up
    to the crash, what drivers were loaded, and what was responsible.
    You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
    If you are overclocking stop.  (chances are if you dont know if you are, you are not)a
    To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
    The procedure:
    * Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
    * Zip up the copy.
    * Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on  your site, MS doesnt have this)
     *Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
    Link for how to  upload below.
    http://www.wikihow.com/Use-SkyDrive
    To ensure minidumps are enabled:
    * Go to Start, in the Search Box type: sysdm.cpl, press Enter.
    * Under the Advanced tab, click on the Startup and Recovery Settings... button.
    * Ensure that Automatically restart is unchecked.
    * Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
    * Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
    * OK your way out.
    * Reboot if changes have been made.
    Please also run MSinfo32 and upload the output as well.
    To run MSinfo32 please go to start>run>MSinfo32
    Go to "file" "save" and upload the saved file with the DMPS
    (Instructions for XP, Vista, Win 7, Win 8)
    System specs are often useful so include whatever you know
    Dyami & Wanikiya ...Team ZigZag.

  • Mac keeps restarting after install

    Ok my mac has been running really slow for about a year, I've tried all sorts but always getting the scrolling wheel, I'm on mountain lion and installed the original install disc leopard and clicked install, it's now turning itself off over and over again for the past hour  is this normal? I have nothing on there I want to keep it's all backed up, will it reboot soon, cheers

    CCould this be the wrong Install Disc for this Mac?
    Hold alt key at bootup, what choices does it show?
    Oh, do you have Firmware Protection set?
    Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option boot will show a lock, and Shift, as well as booting from anything but the Hard Drive.

  • Instantly restarts before loading Windows 7

    Heya, I've been using Bootcamp fine and dandy for a few months now but yesterday I struck a problem. I installed new Windows 7 updates and restarted my computer (as normal) but when my Mac tried to boot into Windows I get a black screen with a white flashing "_" for a few seconds before it restarts again and it goes back to trying to continuously boot into Windows (this is fine as I set Bootcamp to automatically boot into Windows). If I left my Mac on all day it would try to boot into Windows, get to the black " _ " screen, restart, and repeat the process again. I can boot into Mac OSX fine and I can see the Windows 7 partition but it just keeps restarting before it even gets to the Windows 7 load screen.
    Are there any suggestions as to how to fix this? I don't want to have to reinstall Windows, I'll lose all my awesome Sims 3 houses and it takes so long to install everything again. Thanks!
    Message was edited by: Flipip

    Hey Theoos..
    Yeah, my version is not.. the first time i installed it was ok, but after 30 days it was asking for a key... then i installed a cracked version, and the cursor started blinking on start up, and took like 2 minutes...
    I tested several cracks but with all of them happened the same.
    Thanks

  • I'm a recently transformed "Windows to Apple" user, and I need to run various Windows software.  Before installing Windows, I would like to hear from experiences from users if it works well.

    I'm a recently transformed "Windows to Apple" user, and I need to run various Windows software.  Before installing Windows, I would like to hear from experiences from users if it works well. Also, I have an "Office for PC" that I need to re-download, however I was advised by someone that this software cannot be downloaded even if I had Windows in my MAC and that I will have to buy a new "Office for MAC" software.  Thanks.

    Yes, what you are looking at will work.  
    "Most of this would be for access to the shared folders which is not the same as RDP, correct?  So i could
    have myself connect from school to pull a word document, my friend connect from home to get the excel spreadsheet for our table top gaming, and my family connect to pull pictures from the shared folder on the server all at the same time.  Because they
    are accessing the shared folders it is not a RDP where they are accessing the server itself for administration."
    This statement is correct.  All of them would be able to be accessing the shared folders at the same time.  This is the purpose of shared folders. 
    "the 1 user and RDP part is where I'm getting a little confused i think.
    For the RDP part I thought that only applied to the server itself and not any of the client computers
    connected to the server.  So you are still limited to the 2 users to connect concurrently to the server or a client computer at any time?"
    Sorry, not trying to confuse you.  You mentioned to connect to a local machine at the same time.  If you are staying away from RDP, then you won't have this issue.  I would keep all shared folders on the server,  not on any workstations.
     You are correct 2 people can be RDP into a server at once.  For client computers (workstations) you are limited to 1 person at a time.  If you setup Anywhere Access correctly,  then your friends and family should not need to RDP into a
    client computer, they should only need to access the shared folders.  
    Something to keep in mind...for Anywhere Access to work, you will need to purchase a public certificate.  You can do this from GoDaddy.com, Comodo or others. I would recommend either Godaddy or comodo.  They make it easy and give plenty of instructions
    on how to obtain the certificate.  You will probably also have to purchase a domain name, and a static IP from your ISP.  To fully do what you are looking at, it will take some out of pocket $$. 

  • Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

    Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet
                if possible because it is three times faster than wireless.

  • Itunes 10.5.0.142 keeps restarting itself on Windows 7, how can I turn this off?

    All of a sudden, itunes 10.5.0.142 keeps restarting itself on Windows 7.  I did not change any configuration settings on Windows.  How can I disable this?
    Thanks

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • Should I defrag my Mac HHD (internal) before installing  OS X Yosemite?

    Should I defrag my Mac internal HHD before installing the new Yosemite OS X?

    No. But you should:
    Repair the Hard Drive and Permissions - Yosemite, Mavericks, Mountain Lion or Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Now be sure to make a backup of the current system before upgrading. Be sure you need to upgrade. There is really no need to do so as yet.
    See App Compatibility Table - RoaringApps.

  • HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

    Hi Forum Experts, hope all is well.  Hopefully someone will be able to help me with this problem.  
    My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.   
    I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups.  I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered. 
    The screen goes blue and this is the message I get when it crashes and restarts.
        Problem has been detected and windows has been shut down to prevent damage
    to your computer.
    attempt to reset the display driver and recover from timeout failed.
    if this is the first time you've seen this stop error screen,
    restart your computer, if this screen appears again, follow
    these steps:
    Check to make sure any new hardware or software is properly installed.
    If this is a new installation, ask your hardware or software manufacturer
    for any windows updates you might need.
    If problems continue, disable or remove any newly installed hardware
    or software.  Disable BIOS memory options such as caching or shadowing.
    If you need to use safe mode to remove or disable components, restart
    your computer, press F8 to select Advanced Startup Options, and then
    select safe mode.
    Technical Information
    *** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
    *** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
    Collecting data for crash dump ...
    Initializing disk for crash dump ...
    Beginning dump of physical memory.
    Dumping physical memory to disk: 
    the message is also slightly of to the left it really reads like this.
    Problem has been detected and windows has been shut down to prevent damage
    o your computer.
    ttempt to reset the display driver and recover from timeout failed.
    f this is the first time you've seen this stop error screen,
    estart your computer, if this screen appears again, follow
    hese steps:
    heck to make sure any new hardware or software is properly installed.
    f this is a new installation, ask your hardware or software manufacturer
    or any windows updates you might need.
    f problems continue, disable or remove any newly installed hardware
    r software.  Disable BIOS memory options such as caching or shadowing.
    f you need to use safe mode to remove or disable components, restart
    our computer, press F8 to select Advanced Startup Options, and then
    elect safe mode.
    echnical Information
    ** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
    ** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
    ollecting data for crash dump ...
    nitializing disk for crash dump ...
    eginning dump of physical memory.
    umping physical memory to disk: 
    Once windows is fully rebooted all pages, and the display look ok, until it crashes again.   I searched for updated drivers on the HP and Windows site but could not find any.  The one that is currently installed is called (Generic Pnp Monitor).
    Thanks in advance for your expert advice.
    Juan.

    Thank you for the additional information.
    Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible?  There may be a problem with compatibility.  Also, which version of Win 7 are you running; 32-bit or 64-bit?
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Do I have to uninstall iTunes before installing Windows 8.1?

    Do I have to uninstall iTunes before installing Windows 8.1?

    If this is an update from Windows 8 then you should be OK although you should backup your library regularly regardless.
    tt2

  • Software update asks for restart before installing the updates. When restarted password is asked. After the restart the software updates have not been installed. how come?

    Software update ask for a restart before installing the updates. After the restart password is asked. When given the computer is restarted but the software updates have not been installed. How come?

    This article
    http://reviews.cnet.com/8301-13727_7-57400956-263/apple-issues-software-installe r-update/
    explains what might be going on.
    I noted that one of the updates in the list for my wife's iMac was an update to Software Update itself. Probably to fix this very problem. But it wasn't being applied due to Software Update itself not working.
    I considered two solutions.
    (1) Uncheck all the updates except that one update to Software Update. Then after fixing Software Update, apply all the other updates remaining. I did NOT try this approach.
    (2) Download and install the "combo update" for 10.6 -- from here
    http://support.apple.com/kb/dl1399
    I decided to try solution #2. It's a large download, 1 GB, but the whole process took less than 15 minutes. The "combo" update checks and reapplies every update since the beginning of 10.6, so if something is missing or amiss, it gets filled in. It's done manually, by downloading the update, opening the .dmg file, and running the update. When I did this, it fixed the Software Update issue because I then reran Software Update and additional, new updates were found and they all installed fine. Software Update was working as it should. I then ran it a third time and some additional ones were found, also then successfully applied. Finally, no new updates were found by Software Update, which mean everything is up to date.
    I can't be sure if your issue is the same as mine (the bug in the CNET article above) but I'm guessing that the combo update will resolve your issue.

  • My Mac keeps restarting after Mountain Lion install

    In installed Mountain Lion and now my Mac keep rebooting.  I am getting an error that there is a problem with starting up.  I am able to access my computer by using safe mode but as soon as restart it, it keeps rebooting once again.  Please help.

    com.trendmicro.kext.KERedirect
    com.globaldelight.driver.BoomDevice
    The trendmicro kext is likely the problem. Don´t know about the other one. You can probably start up in Safe Mode (boot with Shift-key) and uninstall the app from there, or check if there is an update to the program.
    https://discussions.apple.com/message/19042643#19042643#19042643
    Boot on Safe Mode and then go into the library and get rid of TrendMicro files. There are other threads right now on this so do a quick search and give it a try.

  • Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

    Hello,
    my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
    It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
    Specs for Mac Pro Mid 2010:
    - 2 x 2.66 GHz 6-Core Intel Xeon
    - 14 GB 1333 MHz DDR3 ECC
    - ATI Radeon HD 5770 1024 MB
    - OS X 10.9.2

    Hello Linc,
    I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing"  more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
    STEP 1 - BOOT_TIME:
    8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
    8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit  -  remaining messages this second discarded ***
    8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
    8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
    8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
    8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
    8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
    8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
    8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
    8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
    8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
    8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
    8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
    8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
    8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
    8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
    8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
    8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
    8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
    8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
    8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
    8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
    8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
    8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
    8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
    8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
    8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
    8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
    8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
    8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
    8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
    8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
    8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
    8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
    STEP 2 - SYSTEM DIAGNOSTIC REPORT:
    Tue Aug 12 19:30:48 2014
    panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
    RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
    RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
    R8:  0x0000000000000000, R9:  0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
    R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
    RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81c98d38a0 : 0xffffff801f822f79
    0xffffff81c98d3920 : 0xffffff801f8dc24e
    0xffffff81c98d3af0 : 0xffffff801f8f3746
    0xffffff81c98d3b10 : 0xffffff801fc51e48
    0xffffff81c98d3c40 : 0xffffff801fc8bffe
    0xffffff81c98d3c80 : 0xffffff801fc8c1fd
    0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
    0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
    0xffffff81c98d3d10 : 0xffffff7fa0144068
    0xffffff81c98d3d70 : 0xffffff7fa0142c85
    0xffffff81c98d3da0 : 0xffffff7fa0141646
    0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
    0xffffff81c98d3e20 : 0xffffff7fa0140b8b
    0xffffff81c98d3e50 : 0xffffff801fc956ef
    0xffffff81c98d3ea0 : 0xffffff801fc952af
    0xffffff81c98d3f30 : 0xffffff801fc90e89
    0xffffff81c98d3f70 : 0xffffff801fc95e03
    0xffffff81c98d3fb0 : 0xffffff801f8d7417
          Kernel Extensions in backtrace:
             com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
                dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
             com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
                dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
                dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13E28
    Kernel version:
    Darwin Kernel Version 13.3.0: Tue Jun  3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
    Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
    Kernel slide:     0x000000001f600000
    Kernel text base: 0xffffff801f800000
    System model name: MacPro5,1 (Mac-F221BEC8)
    System uptime in nanoseconds: 26153387208
    last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
    loaded kexts:
    com.Cycling74.driver.Soundflower    1.5.1
    com.motu.driver.PCIAudio    1.6 58373
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleMikeyDriver    2.6.3f4
    com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
    com.apple.driver.AppleHDA    2.6.3f4
    com.apple.driver.AudioAUUC    1.60
    com.apple.driver.AppleUpstreamUserClient    3.5.13
    com.apple.driver.AppleMCCSControl    1.2.5
    com.apple.kext.AMDFramebuffer    1.2.4
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
    com.apple.AMDRadeonX3000    1.2.4
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleLPC    1.7.0
    com.apple.kext.AMD5000Controller    1.2.4
    com.apple.driver.AppleIntelMCEReporter    104
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.0
    com.apple.iokit.SCSITaskUserClient    3.6.6
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.driver.AppleUSBHub    683.4.0
    com.apple.driver.AppleFWOHCI    5.0.2
    com.apple.driver.Intel82574L    2.6.2b1
    com.apple.driver.AirPort.Brcm4331    700.20.22
    com.apple.driver.AppleAHCIPort    3.0.5
    com.apple.driver.AppleUSBEHCI    660.4.0
    com.apple.driver.AppleUSBUHCI    656.4.1
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleACPIButtons    2.0
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    2.0
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
    com.apple.nke.applicationfirewall    153
    com.apple.security.quarantine    3
    com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
    com.apple.driver.DspFuncLib    2.6.3f4
    com.apple.vecLib.kext    1.0.0
    com.apple.iokit.IOSurface    91.1
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.iokit.IOBluetoothFamily    4.2.6f1
    com.apple.iokit.IOAcceleratorFamily    98.22
    com.apple.driver.AppleSMBusController    1.0.12d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
    com.apple.driver.AppleHDAController    2.6.3f4
    com.apple.iokit.IOHDAFamily    2.6.3f4
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOAudioFamily    1.9.7fc2
    com.apple.kext.OSvKernDSPLib    1.14
    com.apple.kext.AMDSupport    1.2.4
    com.apple.AppleGraphicsDeviceControl    3.6.22
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.driver.AppleSMC    3.1.8
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.IOPlatformPluginFamily    5.7.1d6
    com.apple.driver.AppleUSBHIDKeyboard    170.15
    com.apple.driver.AppleHIDKeyboard    170.15
    com.apple.iokit.IOUSBHIDDriver    660.4.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
    com.apple.iokit.IOUSBMassStorageClass    3.6.0
    com.apple.driver.AppleUSBMergeNub    650.4.0
    com.apple.driver.AppleUSBComposite    656.4.1
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IOUSBUserClient    660.4.2
    com.apple.iokit.IO80211Family    640.36
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.6.5
    com.apple.iokit.IOUSBFamily    683.4.0
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    278.11.1
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.DiskImages    371.1
    com.apple.iokit.IOStorageFamily    1.9
    com.apple.iokit.IOReportFamily    23
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    2.0
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.pthread    1

  • Mac Mini Keeps Trying To Install Windows on Startup

    I just got my Mac Mini in today, and I am very frustrated. I tried to install Windows 7 via Bootcamp, I created the partition and inserted the Windows 7 disc but when I tried to install it Windows 7 said it was not the correct format to install it on. So I just shut down the Mac Mini by pressing the power button on the back and now whenever I try to start it up it goes directly into trying to install Windows, is there any fix to this?
    I think if I could just get the disc out it would help but I'm not sure as this is my first Mac.

    Probably ALT (but YMMV!)
    BTW:
    So I just shut down the Mac Mini by pressing the power button on the back
    Probably best NOT to do this in future. Shut it down using the Apple Menu/Shut Down.

  • My Mac Pro keep restarting after install OSX Mountain Lion!

    I had start up errors, took forever to start they keep restarting again and again.
    How can I fix this problems?
    Thx!!

    smc reset
    fixes (should fix) random shut downs and sleep
    http://support.apple.com/kb/HT3964
    it is not that, then an app may be crashing causing the OS to crash and then you may have a setting that restarts your computer should it crash.
    You might also want to attempt a reinstall from the recovery partition
    To get to the recovery partition restart your computer,  hold CMD+R down when you hear the boot up chime. Open Disk Utility first (verify your boot disk and repair if needed) and then close it and reinstall ML.

Maybe you are looking for