MAC LED lights three times with clicking noice after Software Update

Hi all!!! I am a new Mac user. As recommended i have been regularly updating my OS (software updates). After updating, as mentioned, the MAC restarts. But during restart it tries to restart three times (the LED light on the bottom right corner lights u

I'm a bit confused here so I hope to clear things up in your post.
You're Device is listed as Z10 (unless you've updated within the last 2wks of this post).
Mac Desktop?
- did you mean BlackBerry Desktop Manager for Mac?
- or did you mean Z10 BB10 OS updated to 10.1? (which provider)
If on Z10 you mean you updated to 10.1 I hope you're not using a leaked BB10.1 release (that's going to cause you nothing but issues down the road if you're not sure what you're doing, trust me i thought I did myself lol).
Keyboard:
Have you checked in Settings > Keyboard for any entries you custom added or shortcuts that auto correct? If you're not sure you can clear them ALL out, close your apps on your Z10 and retry say an email with a paragraph and see if that fixes it?

Similar Messages

I am installing for 1st time apple tv and after software update no reboot

I am installing Apple TV for 1st time and have done a software update. There is no reboot after the update. I do not want to turn off and on to restart the unit. What should I do?

If unpowering it and restarting doesn't help I think you'll need to buy a cable
You could try the 'black display' troubleshooting steps:
http://support.apple.com/kb/HT1551?viewlocale=en_US&locale=en_US
Specifically I wonder if the AppleTV may be trying to connect with an unsupported resolution giving a black screen. Try cycling display resolutions using these remote commands in step 6:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Select button will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.

Problems with monitor/resolution after software update

I installed the latest security update tonight, and now my monitor no longer properly works with my mini. I have a Dell 2005FPW. I was using 1680x1050 resolution with no problems. When I rebooted after the update, I noticed my resolution had been changed... and now the mac only detects my display as a "VGA display" and I can't select that resolution any more! The monitor still works fine with my PC.
How can I get my 1680x1050 back??
Mac Mini Mac OS X (10.4.5)

Do you have a KVM switch to share your monitor between your Mac and your PC? I was getting this problem when I got one of these so my new Mac could share my monitor etc with my old one but found a way round it. In System Preferences -> Displays, tick the 'Show displays in menu bar' box. Then click on 'Detect displays' from the drop down menu. The screen will go blue for a moment and the computer will recognise the monitor for what it is.
Mac Mini 1.4GHz G4, PowerMac 450MHz G4, both Mac OS X (10.4.6) Airport Express

TS2771 itouch stopped working with Bose sounddock after software update 5.1.1

Have an iTouch that used to work well with Bose SoundDock. Then updated iTouch software to version 5.1.1 and as usual apple ITouchOS now does not recognize the Bose SoundDock at all now. Error message iTouch does not support this accessory. What the heck? How to fix? Buying new dock is not solution. iTouch is gen 4.

You can try the standard fixes:
Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
- If still the problem then it appears that the iOS update broke the compatibility. That happens sometimes. In that case you have to wait for an update from either Apple or Bose.
- Also, use the communities search box in the upper right and search for. bose. I think other users had same problem. It is hard to remember the dock manufacturer.

Server stuck on gray screen with spinning circle after software update 10.5

I'm not sure what I need to do to resolve. I'm knew to administering Apple servers and am doing the 'on the job training' thing. Step by step instructions would be MUCH APPRECIATED!!! Please help! Michele

Thanks for the suggestion, unfortunately it didn't work for me. I had our resident mac expert come in and assist me, it appears that mach_kernel didn't get an upgrade, also appears that it was crashing on directory services. He tried several things to resolve but was unsuccessful. His recommendation was to reinstall to OS. He did say it was nothing I did, it is a very basic server with no third party software installed. He believes it was something with the 10.5.4 software update, and recommended staying away from the software updates, if they aren't critical or security related. So... I'm currently reinstalling the OS, fortunately; I did have it backedup.

Problem with iphone4 music after software update

Updated software on my iphone 4 on 3/22/13. Now, my entire music library on my phone is in icloud format and must be downloaded. Discovered this while flying cross country. Grrrr.
Why did this happen and - more to the point - how can i get my music library to sync normally again so it's simply on my phone and ready to play?
Thanks.

I phoned my provider as requested and they have advised me that it is necessary to send my brand new phone in for repair. I honestly don't know if they have opened a support ticket. I do thank you for your prompt assistance thus far, however, I am none too impressed with this situation. I hope the next software update doesn't cause more problems, so far the phone isn't worh the contract it's written for when it comes to user friendliness, app availability, or user options. I was hoping for better from BlackBerry this time around.

Problems with LG Enact after software update to KitKat

After the update, I seem to have
1) Battery charging issues. Problems charging past 96% (or at least appears that way on the notifications bar on my phone). Have had to unplug and/or restart phone to complete the charge and sometimes it doesn't always work.
2) Slower 4G speeds. Often going down to 3G or 1X
3) Phone seems sluggish overall going from app to app and also when typing on the keyboard
4) Freezing when using wifi or phone data plan.
I've googled these problems and appears that other phones have been having one or more of these issues as well. Any ideas on how to fix these issues?

If you've googled, then you likely have seen some of the suggested "fixes". Have you tried:
1) Check your network settings - be sure it'[s set to LTE/CDMA - I've noticed that updates and resets on my phones tend to revert to Global which results in glitchy behavior, at least for me. Resetting to LTE/CDMA and restarting helps.
2) Run a system cache clear, it won't affect any of your data or setting but WILL clear up unused fuiles and processes that may be slowing things down and causing the sluggishness you see.
Performing a wipe cache partition removes any temporary files that may be causing an issue with the device. All personal files and settings are not affected by this option.
Power the device off.
Press and hold the Volume Up and Down button then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down button to select 'Recovery' then press the Volume Up button.
From the Droid triage screen:
Press and hold the Volume down button.
Press and release the Volume up button.
Release the Volume down button.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.
3) FDR - Factory Data Reset - be sure all your contacts, photos, etc are backed up - if you use Google to store contacts and auto back up photos and music it should already be backed up. Once you do the reset, restore from Google, and selectively reinstall your apps. This is a last resort, but it can clear out a lot of accumulated gunk.
Hope this helps.

Mac pro stuck at apple logo loading screen after software updates

I have an older MBP from 2008 - was prompted to do updates tonight and let it update and restart. It gets stuck at the gray apple loading screen and does nothing else. Have tried resetting PRAM and booting in safe mode. Safe mode works fine but nada on normal. Also tried giving it plenty of time to boot but it continues to load (with the little circle animation under the logo) and nothing ever happens.
Any ideas or suggestions? grateful for any help!! :(

Try starting your computer with the original DVD that came with your Mac Pro then run disk utility on your hard drive to repair it. If you are running Mac OS X 10.7 then start your computer in Mac recovery mode (command + R) then run disk utility on your hard drive.

Problems with Storm 9530 after software update

Greetings, I am new to this forum and hope I am in the right place.
After an email prompt from BlackBerry, Yesterday, I updated my software on my Verizon BlackBerry Storm, 9530.
Now I have several problems;
1. Voice commands are not being recognized as easily as previously, making hands free calling almost impossible.
2. Pandora will stall near the end of each selection. The song will resume after I push the pause and then the play button.
3. When I attempt to live stream from a local radio station, I get the following message: "! This playlist contains no valid songs"    Buffering... is displayed in the upper right hand corner, but no connection is ever made.
Any ideas what I need to do to fix the thing?

Hi and Welcome to the Forums!
1) A known bug...we all hope that RIM is working on a fix.
2) A known bug...Pandora is working on a fix. I have heard that it is available on their website but not yet via AppWorld.
3) Very difficult to diagnose...it could be the website itself...it could be your device browser settings....it could be a number of things. Try these steps.
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Register with VZW:
Dial *228, select option 1
Dial *228, select option 2
Register HRT:
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
Resend Service Books:
KB02830 Send the service books for the BlackBerry Internet Service
Websites can be coded to perform better with some browsers rather than others. The BB Browser can appear to websites as several different things...that setting is, from within the Browser App, (BBKey > Options > Browser Configuration > Browser Identification). Changing that to another browser might help your BB interact better with some websites. In combination with all of the other configuration settings, you need to find the combination of all of these settings that works best for the sites you are visiting. Sadly, there is no "best advice" to give as each persons needs are different. But, I typically find that changing the Browser Identification often helps -- most often by changing to FF or IE (if those are available to you...the options vary by carrier).
Hopefully something in there will get you going again.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G.

I work with Acrobat 9.4.3. on Mac OS 10.5.8 with Enfocus Pitstop Pro 10, Update 1st, crashes...

I work with Acrobat 9.4.3. on Mac OS 10.5.8 with Enfocus Pitstop Pro 10, Update 1st
Acrobat crashes almost every time I open a document and try to make corrections by using Pitstop Pro. Some of my colleagues have the same problem. Is anyone else having this problem? Are these programs more stable on the PC?

if I update the Airport to the latest version, and "control" it with my MacBook Pro, will the older G4 still be able to use the signal from the new Airport?
Yes. Your G4 shouldn't have any difficulty connecting to a Wi-Fi network provided by the latest 802.11ac AirPorts as they support the earlier radio modes that the G4 uses.

BlackBerry Z3 does not Boot, red LED Light is flashing 1x long and after 6x short

After updating my Blackbery Z3 to 10.3.1.1779, my device won't boot and  red LED Light is flashing 1x long and after 6x short. Need help to solve the issue. Thanks in advance.

Thank you for your update.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

I have clicked the Apple Software Update,a window pops up with Failed to check for updates.The operation couldn t be completed. Operation not permitted.This only occurring now did not happen previously.I am using 10.7.4,on a Mbp Pro.

I have clicked the Apple > Software Update,a window pops up with >Failed to check for updates.
The operation could not completed. >Operation not permitted. This is only occuring now.It did not happen
before.The Apple store in Sydney NSW Australia only reinstalled 10.7.4 Lion yesterday.I have downloaded my
Itunes song and reinstalled Intego antivirus.Will somebody please advise me what to do.It is 4:03 PM Saturday
here in Koolewong.
richard.

Uninstall Intego...you don't need it.

Clicked to install software update, now it just has a blue screen. I have tried resetting by holding down on/off and home at same time, apple logo shows up and then goes back to blue screen. What is wrong??

I clicked on the software update, acted like it was updating, and now it just has a blue/turqois screen. I have tried to reset it by holding down the on/off button
and home button at same time, and the apple logo shows up and them goes back to the same screen. Please help...

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

MAC LED lights three times with clicking noice after Software Update

Similar Messages

Maybe you are looking for