Mac Mail and blocked ports

Hi,
I work in a not-very-Mac-friendly school district, but use a Mac anyway. We've figured out how to open the correct ports, etc. for internet use (via Network Preferences) but still can't access email (on an MS Exchange server) or any POP mail (Yahoo) or .mac mail through the mail program. I'm guessing it's something with a port somewhere that needs to be opened. Any thoughts on what it might be, or how to open ports on Mail?
Thanks for any help anyone might offer.
-Widget

From the client side, you don't need to open any ports in Sys Prefs Sharing at all. Opening ports there is only for dealing with inbound traffic that you didn't initiate and weren't expecting as a response to something, i.e., if you were a mail or web server. But you're not a server, you're a client. So close 'em. Plus, in Mail.app (or any other application for that matter), those port numbers (like 25 or 587 or 465 for smtp, or 110 or 995 for pop, or 143 or 993 for imap) are at the destination mailserver, not your computer.
If you launched Terminal.app, "su {adminUserName}" and "sudo tcpdump -i en1" (en1 if wireless, en0, if ethernet cable) you will find that when you launch Mail and try to check mail or send mail, stuff from your computer is leaving your machine on a randomly chosen (by Mail.app) five-digit port number and it's at the destination server where these port numbers (25, 587, 465, 110, 995, 143, 993) have any meaning. Same holds true for all applications, e.g. Safari, port 80 refers to the web server, not what port on which you are sending out your browser request to the server. The (mail, web, other) server responds back from its port (25, 143, ..., 80, etc.) port to the random port number that your application chose.
Your problem, most likely, is that your IT Dept is blocking outbound traffic destined for any "foreign" host addresses at ports like 25 or 143, that are NOT the host addresses of your IT Dept's own mailservers. They would be blocking this at their firewall to the internet. My work's IT Secret Police does this. So unless they relax their firewall restrictions, you're going to have to do something like use your cellphone as a dialup modem to access those mail accounts, or use webmail (since they probably aren't blocking all http (destination server) port 80 traffic -- although they could be blocking traffic addressed to specific host addresses like yahoo.com/webmail).

Similar Messages

Mac Mail and SSL port settings

Since upgrading to Yosemite my Mac Mail changes port setting from 995 to 110 (I use SSL). This happen 2 or 3 times a week. When this happens I can't download emails. I have to change them back. Please help to make my setting permanent.
OS X 10.10.1 (14B25)
MacBook Pro (Retina, Mid 2012)
MAIL Version 8.1 (1993)
regards...
Model

For Mac Mail do the following to edit your port numbers...
Once in Mail choose Mail | Preferences...
Click on Accounts
For Outgoing Server Change do the following
Choose the account you want to edit, then click on "Account Information"
Next to Outgoing Mail Server (SMTP), there is a drop down. Choose "Edit SMTP Server List..."
Click on the Outgoing Server name, then click on "Advanced"
Choose "Custom Port", then type in 465
Clck on "Use Secure Socket Layers (SSL)
Click "OK"
For incoming Server Change Do the following:
Choose the account you want to edit, then click on "Account Information"
Click on "Advanced"
at bottom, change "Port" to 995
Click on "Use SSL"
Once Done you will be prompted to save

Problems accessing mail on Mac Mail and Safari

I'm having problems with accessing my email account, both through Mac Mail and Safari. The domain appears to be blocked. I receive the following error message when I click on the alert icon beside my inbox in Mail:
Unable to Connect
There may be a problem with the mail server or network. Verify the settings for account “***” or try again.
The server returned the error: The server “email domain” cannot be contacted on port 993.
In Safari, I receive a message that it can't find the server when I try the URL.
Both methods of accessing email work on my laptop on the same internet connection, so it appears to be a problem unique to this machine.
What should I do?
Will

Double-click anywhere in the line of text below on this page to select it, then copy it to the Clipboard (command-C):
wmail.speakeasy.net
Launch the Network Utility application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Network Utility in the icon grid.
Step 1
Select the Lookup tab and paste into the address field (command-V). Press return. Post the output that appears below – the text, please, not a screenshot.
Step 2
Select the Ping tab and do the same. Please enter the same input as you did in Step 1. Don't use the output of Step 1 as input to Step 2.
Important Note
Some web browsers and mail clients will automatically convert a domain name such as "www.example.com" to a clickable URL, such as http://www.example.com. That will interfere with the test. If necessary, edit the input in the Network Utility window to remove any added characters.

Attaching files crashes Mac Mail and Thunderbird

Just upgraded from Mountain Lion to Mavericks 10.9.3 on a 2012 Mac Mini 4 core. When attempting to add an attachment to an email, both Mac Mail and Thunderbird start with the spinning beachball and never recover. Force Quit is the only option. Even after that, the Finder has strange screen artifacts left over from Mail (attach file dialog box) and Finder must be relaunched as well.
Dragging and dropping files works okay with Mac Mail. This option does not exist when using Thunderbird, so no workaround available for that App. Also, Mac Mail only gets stuck when attempting to attach files on the desktop. Files from other locations attach OK.
Already tried Repair Permissions, Repair Disk, Reinstalled Mavericks with no change. For now, I have gone back to Mountain Lion since this is a deal breaker, even though everything else seems to work ok (except for the occasional brief spinning beach ball).

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Sending mail with attachment fails on MAC Mail and WRP400.

Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.

The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks.

How do I make Mac mail and iOS Mail sync to each other with a google apps (not traditional gmail) mail account?

I have a google apps mail account in the form [email protected] I have successfully set up both my mac (A1342) Mail and my iPhone (5c) mail so I get my account on both devices. However, when I read an email on my iphone, it remains unread on my mac (and vice versa). But if I read an email on either, the copy in my Gmail inbox on the web is correctly changed to read. How do I set up my mac Mail and iOS mail so they interact with eachother?
I am running OSX 10.9 and iOS 7.

Set the account (on the Mac) as an Imap account, it seems as though it is currently set as POP.

Conflict between program Mac mail and program Microsoft Outlook e-mail???

Denmark, Kolding, 30th of September 2010
A conflict between program Mac mail and program Microsoft Outlook e-mail?
For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
1. Sending from my Mac plain mail as "plain text "(during formatting):
Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
2. Sending from my Mac plain mail "formatted text" (during formatting):
Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
3. Sending plain mail "as normal text "(during formatting)
In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
4. Plain text mail as "formatted Text"
Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
5. Sending mail with file attached:
After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
6. Sending e-mail with photos directly from iPhoto
iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
The above problems can be partly avoided by the following:
1. Only send mails as plain text
Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
2. Sending mail with attached file
Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
3. Sending mail with photos from iPhoto
Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
Apple/Mac is too good a product to make these problems!!
Best regards
Peter Larsen
<Edited by Host>

Welcome to Apple Discussions!
The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
http://en.wikipedia.org/wiki/ASCII
If you want to post a website that is universally understood, see the hints here:
http://www.anybrowser.org/

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

Is there a way to increase the font size in the sidebar of Mac mail and the Finder when running OS 10.6.8?

Is there a way to increase the font size in the sidebar of Mac mail and the Finder when running OS 10.6.8?

The only way to increase the size of the onscreen text in the Finder Menu Bar and in the Side bar in Finder Windows is to change the screen resolution in the OS X Preferences Pane under the Displays icon.
What Mac and screen size are you using?

UAG problems with OSX - same problem with Mac Mail and Outlook 2011 (via EWS)

Hi folks,
I'm trying to fix the last snagging issue I have with OSX clients in a UAG / Exchange 2010 deployment:
When trying to connect Mac Mail or Outlook 2011 the connections are very slow to start up, both at initial config and thereafter.
On connection I see lots of the same error re Session Cookies in UAG and no connection in the mail client. If I leave it for a few minutes, sometime many minutes, the errors stop and I eventually get a working connection.
The error is:
"Sesson Attempted to Access Restricted Application"
User with source IP address x.x.x.x tried to access application Exchange EWS that was restricted that was restricted for the session. This might indicate an intrusion attempt by misusing the session cookie.
Has anyone got any suggestions on how to fix this ?
Many thanks
Steve

Ruud, no, we didn't find a solution, or rather our solution (so far) is to tell users not to use Mac Mail and to use Outlook 2011 instead, which seems to work fine (after some Office updates!)...and we haven't upset anyone with that requirement
(yet).
There are some very long discussions on Apple support forums about the whole Mavericks / Mac Mail / Exchange 2010 issues.
I do hope to have another go at this problem sometime soon, I'm sure there must be a solution (and my money says it relates our hardware load balancers).
Steve

Mac Mail and Outlook 2007

Hi,
Perhaps this has been asked and answered already, but I browsed the forums and couldn't find the answer so my apologies if I missed it.
I recently purchased a PC with Windows 7. I opened up Outlook 2007 and configured my email by typing in my mac mail address and password. I figured that it would just duplicate my email in my mac mail. However, it took all my mac mail and moved it to outlook on my new PC.
I prefer mac mail as I have it sent directly to my iphone for convenience, but I don't mind using Outlook as well.
First of all: Is there a way to get all my mail back to my macbook?
Second: Is there a way I can have the best of both worlds and have Outlook 2007 and Mac Mail sync together?
Thank you for any help or direction on where I can find the answer to my questions.

I've tried everything and still not found a solution too.
I am unable to work remotely.

Mac Mail and Address Book Syncing

For some reason when I begin to type in the name of someone in Mac Mail who I know is in my address book, the automatic search and suggestion does not happen. I am physically having to go into the address book and copy and past the email address. I have looked through the iCloud settings in both the address book and mac mail and it seems to be okay. Any suggestions please.

[email protected] wrote:
For some reason when I begin to type in the name of someone in Mac Mail who I know is in my address book, the automatic search and suggestion does not happen. I am physically having to go into the address book and copy and past the email address. I have looked through the iCloud settings in both the address book and mac mail and it seems to be okay. Any suggestions please.
Make that you checked this box. (Mail>Preferences>Composing)

Mac Mail and Hotmail problem

Hello,
Sorry if this has been asked before but I have searched with no luck yet.
I recently set up Mail to retrieve mail from my hotmail accounts.
It worked fine for about 4 days then just stopped working. It will not connect to the hotmail server.
I have tried all the suggestions I have seen during my search but nothing works.
I deleted my accounts on Mac Mail and started again but now get the message that the server "pop3.live.com" is not responding during the setup.
Why would this work for a few days then without any changes from me just stop working? Why does the server not respond now but did four days ago when I initially set it up without any problems.
Any suggestions would be appreciated
Regards.

The same thing happened to me and probably to all other users of the httpmail plugin. I looked up on the Automagic Software website (creator of httpmail) and they mentioned that as of September 1st 2009, Microsoft has withdrawn support for HTTPmail protocol.
If someone else has got it to work, please post here. Thanks.

Mac Mail and hotmail sync

Hi, I'm using mac mail and have just added my hotmail account but when i check emails on mac mail i also have to check it on the hotmail site itself.
Is there any way to make it so that checking mac mail will sync to the hotmail site.
I hope that is understandable

http://answers.microsoft.com/en-us/windowslive/forum/mail-email/how-to-set-up-ma c-mail-to-sync-your-outlookcom/afdfe981-20c7-4d4a-b6b1-9329b27f018a?tm=137900934 3708

How to disable syncing between .Mac mail and Mail.app?

Howdy everyone,
I'm trying to get my wife's 'new' (aka hand-me-down) 12" PowerBook set up the way she likes it. She uses .Mac Mail, and mostly uses the webmail portion, rather than the Mail.app. Anyway, she's presented me with a question that's stumped me - she wants it set up so that when she deletes a message from .Mac webmail, it stays in her Mail.app Inbox, and vice-versa. I guess you could say that she wants Mail.app to retrieve the messages from .Mac, but doesn't want their mailboxes synced.
Any ideas? I'd fiddled with the settings but can't make it work that way. I have a strong feeling that its right in front of me, but I just can't see it...
Any help would be great!
Thanks,
Huxley

A .Mac type account with the Mail.app is really an IMAP type account and behaves in the same way.
Personal preference but FYI, webmail access is primarily designed when away from your computer and email client needing to access your email account when using a computer with internet access that is not your own.
For what your wife wants, she needs to access her .Mac account as a POP type account with the Mail.app. You can access a .Mac account as a .Mac, IMAP or POP type account with the Mail.app and as an IMAP or POP type account with other email clients.
This will require deleting and recreating the account in Mail selecting POP as the account type when the account is recreated.
All messages that remain on the server will not be affected by this but any messages sent by the account with the Mail.app that are not stored on the server will be deleted when deleting the account in Mail.
If there are any messages in the account's Sent mailbox that need to be saved, transfer all messages from the account's Sent mailbox to a user created "On My Mac" location mailbox before deleting and re-creating the account.
After re-creating the account in Mail as a POP type account, go to Mail > Preferences > Accounts and under the Advanced tab for the account preferences is a setting for removing messages from the server when downloaded. This should not be selected so no messages will be removed/deleted from the server when downloaded by Mail.
Deleting a message from the server via webmail access for the account will have no effect on messages already downloaded from the server by Mail.

Mac Mail and blocked ports

Similar Messages

Maybe you are looking for