Mac Mail and hotmail sync

Hi, I'm using mac mail and have just added my hotmail account but when i check emails on mac mail i also have to check it on the hotmail site itself.
Is there any way to make it so that checking mac mail will sync to the hotmail site.
I hope that is understandable

http://answers.microsoft.com/en-us/windowslive/forum/mail-email/how-to-set-up-ma c-mail-to-sync-your-outlookcom/afdfe981-20c7-4d4a-b6b1-9329b27f018a?tm=137900934 3708

Similar Messages

  • Mac Mail and Hotmail problem

    Hello,
    Sorry if this has been asked before but I have searched with no luck yet.
    I recently set up Mail to retrieve mail from my hotmail accounts.
    It worked fine for about 4 days then just stopped working. It will not connect to the hotmail server.
    I have tried all the suggestions I have seen during my search but nothing works.
    I deleted my accounts on Mac Mail and started again but now get the message that the server "pop3.live.com" is not responding during the setup.
    Why would this work for a few days then without any changes from me just stop working? Why does the server not respond now but did four days ago when I initially set it up without any problems.
    Any suggestions would be appreciated
    Regards.

    The same thing happened to me and probably to all other users of the httpmail plugin. I looked up on the Automagic Software website (creator of httpmail) and they mentioned that as of September 1st 2009, Microsoft has withdrawn support for HTTPmail protocol.
    If someone else has got it to work, please post here. Thanks.

  • Mac Mail and Hotmail

    I have my Mac mail synced with hotmail and another email account.
    Even though I continually check the box to remember my password in keychains when the pop up box comes up asking for it, it still pops up every now and again.
    Does anyone know why this is and how to stop it.
    In Mail preferences I put in the password as well and when I come out and back in it disappears.
    Please help,
    regards, Ian

    Ian,
    Search is your friend. There are numerous topics about this, and it is a commonly reported problem with Hotmail accounts, and virtually unique to Hotmail. For one, see:
    http://discussions.apple.com/message.jspa?messageID=12112332#12112332
    Ernie

  • Help! Mac Mail and Hotmail issues

    Hello. I'm looking for help with Mac Mail. I am a new Mac owner and haven't had any trouble before with hotmail on my ipod and iphone. Upon setting up the new mac and mail account (using a hotmail account) it started receiving messages, approximately 30. During that time, we turned off our Century Link wireless and set up a time capsule as wireless with the Century Link router/modem combo now acting only as a modem. After that, the email account stopped receiving messages. We tried removing the account and readding it and now no messages show up in the inbox at all. (not sure if changing the wireless actually affected any of this, but the timing was coincidental) When I look at "get account info", I can see that there are 543 messages listed under the Hotmail account under the heading "all messages on POP server." However, these messages do not actually show up in the Inbox. I've tried other help sites and as far as I can tell, the incoming and outgoing servers are set right. Any help would be greatly appreciated!

    http://answers.microsoft.com/en-us/windowslive/forum/mail-email/how-to-set-up-ma c-mail-to-sync-your-outlookcom/afdfe981-20c7-4d4a-b6b1-9329b27f018a?tm=137900934 3708

  • Mac Mail and Gmail Sync

    Firstly, I'm posting this in the iCal section because there's not a dedicated Mail support section, and I think my question may be similar to some iCal concerns.
    With the advent of 10.6, I know it's now possible to sync your "Contacts" contained within your Mac address book with Gmail. I also know that for some time it has been possible to import your Gmail contacts to Mac Mail.
    My question considers the reverse - that is, it is possible to export your Mac Mail contacts to Gmail, and even better, possibly keep them synced. Often, Mail contacts and Address Book contacts are not one and the same. I'm specifically referring to the email addresses and names that Mail autocompletes when you type in the "To:" or "Cc:" fields. I only have 100 contacts in my address book; I know I have many more stored somewhere within Mail. As of now, however, I am unable to find them and unable to use them when using Gmail on the web. It would be great to be able to write an email to a new address in either Mail or Gmail, and be able to bring it up later from a different computer.
    Any help or suggestions would be much appreciated.
    Thanks.
    Kevin

    It sounds like you've got Gmail set up in Mail on Leopard as a POP account. This would cause problems with how it synchronizes with other clients (like your iPhone) accessing the same mail account. The iPhone by default uses IMAP for Gmail access, which is what you should use if you are going to access Gmail with more than one client on a regular basis.
    Once that is done, make sure you use the recommended settings for Apple Mail in order for your Gmail account to behave properly.
    Lastly you should 'map' your folders so that Mail uses your Gmail folders for it's like folders. Using your Sent folder issue as an example, once you've set up Gmail to use IMAP you'll see a folder named [Gmail]/Sent. Click on that folder and go to the menu Mailbox > Use This Mailbox For > Sent. That folder will disappear from the folder pane and when you click on the Sent folder, the items in your Gmail Sent folder will now show up.
    Edit: I just noticed that you say your MBP is using Snow Leopard. The settings should be exactly the same, but in the future you should post your questions about Snow Leopard (10.6) in the Snow Leopard forum.
    Message was edited by: Euchre

  • How to disable syncing between .Mac mail and Mail.app?

    Howdy everyone,
    I'm trying to get my wife's 'new' (aka hand-me-down) 12" PowerBook set up the way she likes it. She uses .Mac Mail, and mostly uses the webmail portion, rather than the Mail.app. Anyway, she's presented me with a question that's stumped me - she wants it set up so that when she deletes a message from .Mac webmail, it stays in her Mail.app Inbox, and vice-versa. I guess you could say that she wants Mail.app to retrieve the messages from .Mac, but doesn't want their mailboxes synced.
    Any ideas? I'd fiddled with the settings but can't make it work that way. I have a strong feeling that its right in front of me, but I just can't see it...
    Any help would be great!
    Thanks,
    Huxley

    A .Mac type account with the Mail.app is really an IMAP type account and behaves in the same way.
    Personal preference but FYI, webmail access is primarily designed when away from your computer and email client needing to access your email account when using a computer with internet access that is not your own.
    For what your wife wants, she needs to access her .Mac account as a POP type account with the Mail.app. You can access a .Mac account as a .Mac, IMAP or POP type account with the Mail.app and as an IMAP or POP type account with other email clients.
    This will require deleting and recreating the account in Mail selecting POP as the account type when the account is recreated.
    All messages that remain on the server will not be affected by this but any messages sent by the account with the Mail.app that are not stored on the server will be deleted when deleting the account in Mail.
    If there are any messages in the account's Sent mailbox that need to be saved, transfer all messages from the account's Sent mailbox to a user created "On My Mac" location mailbox before deleting and re-creating the account.
    After re-creating the account in Mail as a POP type account, go to Mail > Preferences > Accounts and under the Advanced tab for the account preferences is a setting for removing messages from the server when downloaded. This should not be selected so no messages will be removed/deleted from the server when downloaded by Mail.
    Deleting a message from the server via webmail access for the account will have no effect on messages already downloaded from the server by Mail.

  • Is it possible to sync my mail folders/boxes between Mac mail and iPhone?

    Is it possible to sync my mail folders/boxes between Mac mail and iPhone? ie. I get an email on my iphone but I also read it and store it On My Mac folders.  Is there a way this can be set up 'same' on my iphone...then I would only need to read my mail one place? Same as my iPad...I'm tired of doing the same step 3 times ONLY because my folders are only on my MAC

    IMAP is a mail protocol. Your email provider must support it (most regular ISPs do not). If your mail provider supports IMAP then when you create an account on the iPhone choose "IMAP" when prompted. You cannot convert a POP3 account to IMAP; you must delete it and re-create it. But first check to see if your provider supports it. Microsoft Exchange works similarly to IMAP, but has the added feature of "pushing" mail to your phone within seconds of it being received.
    With IMAP and Exchange the master copy of all mail remains on the server until deleted. Your computer(s) and iPhone sync with the server, so all of your devices will show the same messages. When you delete from one the message will be removed from all with the next sync (or immediately for Exchange).

  • How do I make Mac mail and iOS Mail sync to each other with a google apps (not traditional gmail) mail account?

    I have a google apps mail account in the form [email protected] I have successfully set up both my mac (A1342) Mail and my iPhone (5c) mail so I get my account on both devices. However, when I read an email on my iphone, it remains unread on my mac (and vice versa). But if I read an email on either, the copy in my Gmail inbox on the web is correctly changed to read. How do I set up my mac Mail and iOS mail so they interact with eachother?
    I am running OSX 10.9 and iOS 7.

    Set the account (on the Mac) as an Imap account, it seems as though it is currently set as POP.

  • Mac Mail and Address Book Syncing

    For some reason when I begin to type in the name of someone in Mac Mail who I know is in my  address book, the automatic search and suggestion does not happen.  I am physically having to go into the address book and copy and past the email address.  I have looked through the iCloud settings in both the address book and mac mail and it seems to be okay.  Any suggestions please.

    [email protected] wrote:
    For some reason when I begin to type in the name of someone in Mac Mail who I know is in my  address book, the automatic search and suggestion does not happen.  I am physically having to go into the address book and copy and past the email address.  I have looked through the iCloud settings in both the address book and mac mail and it seems to be okay.  Any suggestions please.
    Make that you checked this box. (Mail>Preferences>Composing)

  • Mac Mail and Outlook 2007

    Hi,
    Perhaps this has been asked and answered already, but I browsed the forums and couldn't find the answer so my apologies if I missed it.
    I recently purchased a PC with Windows 7. I opened up Outlook 2007 and configured my email by typing in my mac mail address and password. I figured that it would just duplicate my email in my mac mail. However, it took all my mac mail and moved it to outlook on my new PC.
    I prefer mac mail as I have it sent directly to my iphone for convenience, but I don't mind using Outlook as well.
    First of all: Is there a way to get all my mail back to my macbook?
    Second: Is there a way I can have the best of both worlds and have Outlook 2007 and Mac Mail sync together?
    Thank you for any help or direction on where I can find the answer to my questions.

    I've tried everything and still not found a solution too.
    I am unable to work remotely.

  • Mac Mail doesn't sync changes to imap server, anyway to change this ?

    It appears that mac mail does not sync any changes to the mailbox back to the imap server until mac mail quits. This is a drag, since I almost never quit mac mail and I like to see my changes reflected properly on my iphone/ipad and good old fashioned text based email. Is there anyway to tell Mac Mail to update the server on all changes (so delete the message when I delete it, or at least mark it deleted, etc..)
    Thanks!

    I have experienced the same problem for a long time and it drives me nuts.
    However, when I upgraded to 10.6.5, things seemed to get a lot better, although I still have occasional problems with this. So, if you haven't yet upgraded, I'd suggest doing so.
    In general, if anyone has any insight into why Mail seems to

  • Conflict between program Mac mail and program Microsoft Outlook e-mail???

    Denmark, Kolding, 30th of September 2010
    A conflict between program Mac mail and program Microsoft Outlook e-mail?
    For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
    Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
    I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
    1. Sending from my Mac plain mail as "plain text "(during formatting):
    Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
    2. Sending from my Mac plain mail "formatted text" (during formatting):
    Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
    3. Sending plain mail "as normal text "(during formatting)
    In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
    4. Plain text mail as "formatted Text"
    Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
    5. Sending mail with file attached:
    After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
    6. Sending e-mail with photos directly from iPhoto
    iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
    The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
    The above problems can be partly avoided by the following:
    1. Only send mails as plain text
    Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
    2. Sending mail with attached file
    Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
    3. Sending mail with photos from iPhoto
    Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
    If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
    I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
    Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
    Apple/Mac is too good a product to make these problems!!
    Best regards
    Peter Larsen
    <Edited by Host>

    Welcome to Apple Discussions!
    The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
    Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
    http://en.wikipedia.org/wiki/ASCII
    If you want to post a website that is universally understood, see the hints here:
    http://www.anybrowser.org/

  • Sending mail with attachment fails on MAC Mail and WRP400.

    Sending mail with attachment fails on MAC Mail and WRP400.
    We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
    The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
    If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
    We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
    We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
    This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
    We need help. Thanks.

    The problem was fixed since beta firmware 2.00.11.
    I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
    See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
    Thanks.

  • Is there a way to increase the font size in the sidebar of Mac mail and the Finder when running OS 10.6.8?

    Is there a way to increase the font size in the sidebar of Mac mail and the Finder when running OS 10.6.8?

    The only way to increase the size of the onscreen text in the Finder Menu Bar and in the Side bar in Finder Windows is to change the screen resolution in the OS X Preferences Pane under the Displays icon.
    What Mac and screen size are you using?

  • UAG problems with OSX - same problem with Mac Mail and Outlook 2011 (via EWS)

    Hi folks,
    I'm trying to fix the last snagging issue I have with OSX clients in a UAG / Exchange 2010 deployment:
    When trying to connect Mac Mail or Outlook 2011 the connections are very slow to start up, both at initial config and thereafter.
    On connection I see lots of the same error re Session Cookies in UAG and no connection in the mail client. If I leave it for a few minutes, sometime many minutes, the errors stop and I eventually get a working connection.
    The error is:
    "Sesson Attempted to Access Restricted Application"
    User with source IP address x.x.x.x  tried to access application Exchange EWS that was restricted that was restricted for the session. This might indicate an intrusion attempt by misusing the session cookie.
    Has anyone got any suggestions on how to fix this ?
    Many thanks
    Steve

    Ruud, no, we didn't find a solution, or rather our solution (so far) is to tell users not to use Mac Mail and to use Outlook 2011 instead, which seems to work fine (after some Office updates!)...and we haven't upset anyone with that requirement
    (yet).
    There are some very long discussions on Apple support forums about the whole Mavericks / Mac Mail / Exchange 2010 issues.
    I do hope to have another go at this problem sometime soon, I'm sure there must be a solution (and my money says it relates our hardware load balancers).
    Steve

Maybe you are looking for

  • Using the Day view in Calendar, how do I turn off the list of events?

    In Snow Leopard, the events were shown by the hour, as they are now in Lion on the far right (when in Day view). However, also in Day is a repeat of all the same events, but in word-list order. That appears in the middle of the interface if you are s

  • End of Contract Huge Price Hike

    Earlier this year (April 2013) I was offered the chance to upgrade my Broadband to BT Infinity free of charge with a promise on the letter of no change to my contract or price increases.   Although the speed difference from standard Broadband (15-17m

  • Can ARD be used to clone like 10 machines at once?

    I have used the net restore in the past, but recently we purchased ARD and was wondering if this can be done since it would be easier to do with eithernet than firewire cable. If it can be done, what do I need to do? I already made my master image us

  • PLD- Shipping Type

    Hi All,   The Shipping type field in the BP Master and in the Sales Order document is renamed. When this field is mapped in the PLD of Sales order the value returned is numeric and not a text. For e.g. The shipping type is "SEA" but the value returne

  • Emailing photos for newspaper print - Need 300 dpi

    I have read so many different articles on this and am still confused. I have pictures in iPhoto '09 that, whatever way I export or email them, the Image dpi ends up at 72. The paper is insisting on 300 dpi.  Is it 72 because of how the camera was set