Mac Mail and Outlook 2007

Hi,
Perhaps this has been asked and answered already, but I browsed the forums and couldn't find the answer so my apologies if I missed it.
I recently purchased a PC with Windows 7. I opened up Outlook 2007 and configured my email by typing in my mac mail address and password. I figured that it would just duplicate my email in my mac mail. However, it took all my mac mail and moved it to outlook on my new PC.
I prefer mac mail as I have it sent directly to my iphone for convenience, but I don't mind using Outlook as well.
First of all: Is there a way to get all my mail back to my macbook?
Second: Is there a way I can have the best of both worlds and have Outlook 2007 and Mac Mail sync together?
Thank you for any help or direction on where I can find the answer to my questions.

I've tried everything and still not found a solution too.
I am unable to work remotely.

Similar Messages

  • UAG problems with OSX - same problem with Mac Mail and Outlook 2011 (via EWS)

    Hi folks,
    I'm trying to fix the last snagging issue I have with OSX clients in a UAG / Exchange 2010 deployment:
    When trying to connect Mac Mail or Outlook 2011 the connections are very slow to start up, both at initial config and thereafter.
    On connection I see lots of the same error re Session Cookies in UAG and no connection in the mail client. If I leave it for a few minutes, sometime many minutes, the errors stop and I eventually get a working connection.
    The error is:
    "Sesson Attempted to Access Restricted Application"
    User with source IP address x.x.x.x  tried to access application Exchange EWS that was restricted that was restricted for the session. This might indicate an intrusion attempt by misusing the session cookie.
    Has anyone got any suggestions on how to fix this ?
    Many thanks
    Steve

    Ruud, no, we didn't find a solution, or rather our solution (so far) is to tell users not to use Mac Mail and to use Outlook 2011 instead, which seems to work fine (after some Office updates!)...and we haven't upset anyone with that requirement
    (yet).
    There are some very long discussions on Apple support forums about the whole Mavericks / Mac Mail / Exchange 2010 issues.
    I do hope to have another go at this problem sometime soon, I'm sure there must be a solution (and my money says it relates our hardware load balancers).
    Steve

  • New BT Mail and Outlook 2007

    There is probably a simple answer to my problem. I use Outlook 2007 OS Windows 7
    Since BT changed their protocol to IMAP the appearance of my emails has also changed. Instead of appearing in Personal Folders>Inbox I have a new folder and have to scroll down to read my incoming mail - I always use a preview pane and my inbox is always on top. When I delete an email in the IMAP folder it remains there (crossed through) Can I change my set up as I now have my old inbox + the inbox in my new folder, not all my folders have migrated to the new folder - it looks a mess
    Solved!
    Go to Solution.

    licquorice wrote:
    Unfortunately, you will have to delete the account and set it up again to change it back to POP3 though.
    Are you sure about that. Can you not set up the same email account as both an IMAP and POP3 account in Outlook. You can in Windows Live Mail. Don't know why you would really want to but you can.
    I suppose if you do set it up as both, once the POP one is working OK you could then delete the IMAP one.

  • I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

    I may be way out, but do you know about this product, would it help integrate the Macs for you.
    https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Conflict between program Mac mail and program Microsoft Outlook e-mail???

    Denmark, Kolding, 30th of September 2010
    A conflict between program Mac mail and program Microsoft Outlook e-mail?
    For several months tried to discuss and resolve with several Apple specialists/support, but without much luck.
    Therefore I have discussed these issues with 2 different and independent Mac users to find out in testing other Mac users will have the same problems as outlined in the below mentioned situations.
    I will therefore outline the coverage issues, as mentioned, including occurs on my iMac 21.5 " with serial number: <Edited by Host> and 2 friends with their Macbooks of new dates as follows:
    1. Sending from my Mac plain mail as "plain text "(during formatting):
    Plain text mail as "Plain Text "(during formatting) Verdana font size 10, sent and received on Windows PC with the correct letter size - but with the font changed to Century Gothic!!!
    2. Sending from my Mac plain mail "formatted text" (during formatting):
    Eg. with my signature/signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text dispatched - the mail received as text with New Times Roman size 12 and signing /signature color Verdana now in size 13.5!!!!
    3. Sending plain mail "as normal text "(during formatting)
    In the mail text underlined and made bold - the program asks whether to convert to RTF format (to keep underlining, bold, etc.) and Verdana as font and size 10, YES - this mail is received on the Windows PC as text with New Times Roman with the desired underlining and bold text and size 12!!!!
    4. Plain text mail as "formatted Text"
    Eg. with signature / signature-colored types and Verdana as font and size 10, possibly with underlining and italics in the text sent - received as text with New Times Roman and signing / signature as colored Verdana now in size 13.5!!!
    5. Sending mail with file attached:
    After producing a normal text document modified to PDF and directly from the Adobe Reader sent this PDF file in e-mail formatted as normal text with font Verdana 10 point, with signature. This is received on the Windows PC with a PDF file OK, but the font of the mail text is changed to Century Gothic and missing signature. Signature is available as an attachment on the Windows Outlook e-mail program as a ATT00113.text file. This can be opened and there is the missing signature!
    6. Sending e-mail with photos directly from iPhoto
    iPhoto opens and click on the desired photos eg. 5 pcs. (Exactly as mentioned in the demo video!) and click on the e-mail icon at iPhoto and the program opens and e-mail that is opened with the attached photos and rich text is being used in the mail. Signature disappears and must be clicked on the mail by the sender.
    The mail is received with the attached pictures OK - text changed to Times Roman with the desired bold - though no signature and 5 pcs. Att0028.html files attached. These can be opened and contains the file number each picture!
    The above problems can be partly avoided by the following:
    1. Only send mails as plain text
    Without any underlining, attachments, etc.. When the Windows PC Outlook receiver opens the mail where only the text fond is changed!!
    2. Sending mail with attached file
    Start opening the mail program and use formatted plain text first and then attach (with the staple) file, and the Window receiver will get the file, but text and signature changed to Times New Roman size 13!!
    3. Sending mail with photos from iPhoto
    Start by opening mail program text in Verdana 10 and click the Photo Browser and find (look for - takes its time!) the pictures you want to send and pull/drag them into the mail and send, - images, text and signature are in the mail on Windows PC - but with the font changed to Century Gothic!!!
    If sent as formatted text with various underlining, italics, etc. together with the photos will be received OK - but the writing is now New Times Roman size 12 signatures Verdana now in size 13!!!
    I must say – I am disappointed with the Mac mail program – it actually means that sending a perfect mail with underlining, colours, a.s.o. also photos directly from iPhoto – will received at a Windows computer in a totally mess.
    Looking forward to some good news from either Mac supporter or some clever Mac users who can help me to adjust my Mac to avoid these problems IF POSSIBLE!!!!.
    Apple/Mac is too good a product to make these problems!!
    Best regards
    Peter Larsen
    <Edited by Host>

    Welcome to Apple Discussions!
    The PC sets the font on its side, the Mac does on its side for plain text. There is no "font size" in plain text coding. Rich Text gives you a bit more control, but only if both e-mail clients support it. HTML gives you a bit more control, but only if both e-mail clients support it. Use the asterisk, parenthesis, underscore, or any keyboard symbol that is part of the original ASCII. Otherwise, the chance is nobody else will be able to read it who does not have your e-mail client in the same version.
    Sadly there are no e-mail standards except MIME for attachment, and even that isn't universally supported. E-mail is not the ideal medium for anything except plain text that is ASCII. To learn more about ASCII, see:
    http://en.wikipedia.org/wiki/ASCII
    If you want to post a website that is universally understood, see the hints here:
    http://www.anybrowser.org/

  • Garbage Mail in Outlook 2007 for  workflow  approval and completion

    Dear SRM Gurus,
    We have implemented SRM 7.0 and are currently facing issue with outlook 2007 integration.
    The workflow work item mail are getting Fwd to Outlook  after scheduling  the report /SAPSRM/OFFLINEAPPROVALSEND with option
    - one e-mail per workitem
    -HTML format
    - approval button not available.
    However the  work item mail is coming with garbage content.  earlier we have formating issue and then implemented OSS Note 1482125 , after that entire mail content is a garabage mail in outlook.  the format of the mail in SOST is now showing "HTM"  and  in SOST mail  looks good.
    Have anyone experienced this issue earlier ?
    Or  does  outlook 2007 only  support  plain text format and not  HTML format.
    Any help in this will be appreciated.
    Thanks
    Iftekhar Alam

    Dear Iftekhar,
    I guess your problem is the HTM format of the mails, as Outlook 2007 does not use browsers but MS Word to display the mails. You should try to send the RAW format.
    For Outlook 2010, HTM is supported again, but weu2019re using RAW format, too, for that version.
    Best regards,
    Karsten

  • Cant Get Mac Mail ( or Outlook 2011) to connect to Excange erver

    When connecting via IPAD it took 30 seconds to set up.
    I cant get it running from MAC Mail nor Outlook 2011 for MAC.
    Exchange "Server not responding".
    It runs great from Outlook Web Access on the mail or from VmWare running Win 7 with Outllok 2007
    H E L P !!

    +1. Me, too. Any solutions? Every few months I spend a lot of time looking for workarounds for this issue. I tried with Mail, and recently I tried the new Microsoft Office. No luck. I work from home and the company I work for uses an exchange server. I'm stuck with Entourage 2008. It's a real bummer.

  • Sending pdfs from Mac Mail to Outlook

    I have users that are sending pdfs from mac mail to outlook and the attachements are not going through.  All you see is the paperclip and nothing else.  This has just started happening.  I am telling the users to send emails as plain text with windows friendly attachement as well as to put the attachment in the email.  Anyone have any idea how to fix this.  There are some unhappy users.
    Thank you for the help
    Jeff

    Outlook for Mac has no option to import from Apple's Mail application. The best suggestion I can offer is that you use an IMAP account to transfer your messages.
    Get a free Gmail IMAP account from Google and connect to the account in Mail. Drag your messages into the account to copy them to the server.
    Connect to the same account in Outlook and copy your messages from the server to folders under On My Computer.
    Another option is to get a third party tool that are available online.
    One tool that I am familiar with is Apple Mail Export
    Or you can find more on
    google or
    yahoo for more results
    Hope this helps!

  • Has anyone had recent issues with iCloud mail and Outlook 2011?

    Two days ago without warning when sending an e-mail from Outlook 2011 from a MacBook Pro running 10.8. (Have a .mac account), I had an error pop up, see below.
    Tried entering the password but the same error popped up. Thought there might be an error with the keychain so verified and ran a repair. Still the error continued. I checked that the password was still working and logged into iCloud. I then launched Mac Mail and this worked fine and so also my iPhone / iPad etc. Nothing I did made it possible to send e-maills from my .mac account although I could receive them.
    For the last couple of days I have been using my MacBook AIr for sending mails for the same account via Outlook 2011. This has been working fine all day until 25 mins ago when the same error message popped up on this Mac too. Went through the same set of tests and again Mac Mail works and so does the password.
    Have tried to Google for a solution but can't find anything relevant. Could this be Microsoft trying to cause problems for Apple users, some rogue update, iCloud security certificate issue, or something more sinister. Any suggestions for a fix gratefully received, as currently I can't use Outlook 2011 on either Mac.

    Hi guys!
    I am also having big trouble syncing my iCloud acc. I am able to send email, but i cannot recieve any. I have tried almost everything. I have tried using p01, p02, p99 servers, without solving the problem. I have tryed typing "INBOX" and "/" in IMAP root, still not working. Have anyone got a solution?
    I am using:
    OS X 10.9.1
    Outlook 2011 for mac v. 14.3.8
    I really hope someone has got an answer!
    Sorry the text in the screenshots are in danish. I hope you get the idea anyway.

  • Hoping for some help with a very frustrating issue!   I have been syncing my iPhone 5s and Outlook 2007 calendar and contacts with iCloud on my PC running Vista. All was well until the events I entered on the phone were showing up in Outlook, but not

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

    Hoping for some help with a very frustrating issue!
    I have been syncing calendar and contacts on my iPhone 5 and Outlook 2007 using iCloud  2.1.3 (my PC is running Vista). All was well until the events I entered on the phone were showing up in Outlook, but not the other way around. I’ve tried the usual recommended steps: deselecting calendar and contacts in the iCloud control panel and then re-selecting, signing out of the panel and back in, and repairing the Outlook installation in control panel.  I even uninstalled iCloud on the PC and downloaded it again (same version). 
    The furthest I’ve gotten is step 2 (and once, step 3) of 7 while performing “Outlook Setup For iCloud.” At that point I get, “Your setup couldn’t be started because of an unexpected error.”  After the first attempt at all this, all my calendar events disappeared from Outlook, although they are still in iCloud calendar and on my phone.
    Sound familiar?  Any ideas on how to solve this iCloud/Outlook issue?  Thanks much in advance!

  • How can I read my incoming emails in one folder?Like I do in Live mail and Outlook express.

    Now we can only read emails in different folders if I am managing multiple email accounts.
    It does not feel so comfortable as we use Live mail and Outlook express.

    '''Unified Inbox for pop and Imap mail accounts:'''
    If you use the Unified folder view, this will show an Inbox with all emails from all accounts, with sub folder Inboxes for the individual Inboxes for the various accounts. Then you can choose to view the collective Inbox or the individual Inbox.
    This method can be chosen simply and quickly.
    * View > folders > Unified
    '''Setting up Pop mail accounts to use Global Inbox.'''
    Pop mail accounts can be set up to use a Global Inbox in Local Folders.
    Imap mail accounts cannot be set up to use Global Inbox, but can use the Unified view.
    To change Pop mail accounts to use Global Inbox, you would need to move all emails into Local Folders Inbox.
    Then change the settings for each pop mail account.
    Tools > Account Settings > Server Settings for the pop mail account
    click on 'Advanced' button
    select 'Inbox for a different account' and 'Global Inbox (Local Folders)
    click on OK
    You need to do this for each Pop mail account.
    Then close Thunderbird. You must do this before downloading anything otherwise the emails may continue to go to the wrong Inbox.
    Wait a few moments for Thunderbird to fully close and then restart Thunderbird.
    Please read more info on global inbox here:
    * http://kb.mozillazine.org/Global_Inbox

  • How do I make Mac mail and iOS Mail sync to each other with a google apps (not traditional gmail) mail account?

    I have a google apps mail account in the form [email protected] I have successfully set up both my mac (A1342) Mail and my iPhone (5c) mail so I get my account on both devices. However, when I read an email on my iphone, it remains unread on my mac (and vice versa). But if I read an email on either, the copy in my Gmail inbox on the web is correctly changed to read. How do I set up my mac Mail and iOS mail so they interact with eachother?
    I am running OSX 10.9 and iOS 7.

    Set the account (on the Mac) as an Imap account, it seems as though it is currently set as POP.

  • I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook.

    I have an Ipad2, an Iphone 4 . I want to be able to sync both of these with my Windows desktop and Outlook 2007. I would like to sync to and from the Idevices and Outlook. When I attempt to sync in itunes I get a popup message asking if I want to delete, Merge or cancel. Not wanting to delete of cancel the only option left is Merge.
                When selecting Merge all of the entries in outlook are added to the idevice. The next time I merge all of the same entries plus any new ones are added, resulting in older entries being repeated i.e an entry like “John’s Birthday” will appear 5 or 6 times on the same date.
                How do I resolve this issue? How do I get the the sync process to add only new entries?

    This is a great question. First, facetime will not work because it has to establish a Call connection first. iMessage should work, but how to get it going I am not sure. Two great Apps to try are, Viber and Skype. Viber is excellent, it works over WiFi, you can make free calls and free text messages all over the world with other users who have Viber installed. It does not even have to be open on screen to work. Viber does have to recieve one text message with activation code, to activate it, this will be your only hurdle, but maybe Verizon can help you get that one text message. Skype does have to be open on screen however, but this can function like Facetime with WiFi connection. Definitely get Viber free in App Store, and put it on all your iDevices so the old Verizon iPhone can function as a telephone when on WiFi.

  • Hotsync problem with Windows 7 and Outlook 2007

    Hello,
     I try to make contact between my Palm Tungsten E2 and outlook 2007 on my laptop with Windows 7 for synchronizing.Before this, I worked on this laptop with Windows Vista and also Outlook 2007.I installed the standard software and after that the update for outlook 2007 (palmoutlook2007conduits.zip (7.2MB)).In Vista this was working well, but not in Windows 7.I can see in the soft ware part that palmoutlook2007conduits is installed, but the in the log book I still have the same errors :
    - Not Synchronized
    Outlook Contacts synchronization failed
    When I go to the settings, also there is the same error : “This version of Outlook is not supported by the Outlook Conduit application. Supported outlook versions are Outlook 98, 200, XP(2002) and 2003.”. It looks like the upgrade with palmoutlook2007conduits have no effect in Windows 7. 
    I hope someone have a solutions for this problem.
    Post relates to: Tungsten E2
    Post relates to: Tungsten E2

    My new computer came with Windows 7 64-bit, and I need to HotSync my Tungsten E2 with Outlook 2007.  Did anyone find a way to do this?

Maybe you are looking for

  • [SOLVED]Terminal at Lower Resolution

    Hello, I am on Arch linux with Gnome (GDM) and I have a question- 1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau),

  • Trying to install Windows 7 on my mac pro

    Trying to install Windows 7 on my mac pro.  I'm running 10.6, I have boot camp 3.04 and after I partition and install the disc (using 32bit) it restarts automatically and freezes on a black screen.  I have updated my software so what should I do?  Th

  • Ipod touch screen shadows?

    hi, last december, i had my ipod sitting on a table and i went to take it and the picked it up, and saw this small round circular shadow on the inside of the screen, (the ipod was in the sun does that make a difference?) i took it into the shade and

  • JSR 168 and Struts support sample error

    I'm trying to get the sample webapp for JSR 168 and Struts support working with WebLogic 8.1, and I'm having problems with the struts portlet. The other portlets seem to work fine, but the Struts portlet gives the following error after clicking "Save

  • Project approval based on Teams/Managers

    Hello All, In Project server 2013 workflow, I want to assign the approval workflow for the review purpose to the members based on the teams. Say I have 3 teams, team 1, team 2 and team 3. Team 1's members are Member11, menber12 and member13 and so on