Mac mail shows the wrong name in the inbox

Mac mail is showing the wrong name for one sender in the inbox. It is correct in the preview pane and when opened.
Is also correct on ipad and iphone. Only wrong in mac mail. This occurred when the person changed their name.
Have already deleted that user from the previous emailed contacts. Have started in Safe mode to clear caches.
System is a macbook air with Mavericks 10.9.4
Thanks in advanced for any help with this.

What next?
I'd check with the senders whom you receive mail from to be sure they have your name correctly entered in the address book for whatever mail client they're using; I'm guessing the problem is on their end, since we've eliminated the possibilites on your end: Address Book and the Previous Recipients list. Those are the only two places Mail could draw that information from, unless it's in the original message sent to you, which you can confirm by opening a message, then choosing View > Raw Source. Look for the To: field and if the name doesn't match yours, then you know the problem is on the sender's end, in which case you should tell them to correct your name in their email address book.
Can I clear out the email account completely and start again.
You could, but that won't solve the problem. That name is coming from somewhere external to Mail (since Mail doesn't keep any such information), so it's just a matter of finding the source correcting it.

Similar Messages

  • My ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

    my ipad is in recovery mode that failed,it shows the progress bar but is frozen. Itunes shows the wrong name for the Ipad but the correct account.

    You're gonna have to restore the iPhone from your last backup with iTunes. You did do a backup before you attempted to update the software didn't you?

  • The wrong name of the message sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

    When sending messages to one of our iPhones, the wrong name of the sender appears. The phone also does not notify the receiver. This started after we purchased in iPad and attempted sending that phone an iMessage.

    Hi buddy, I figured out what is wrong with that. I had the very same issue, while sending an sms via iMessage on Mountain Lion. I called the Apple guy at the Apple care support but without any luck.
    At the end--at least in my case, but it could also be yours--I think I have understood what was going on. This happens when you have your Apple ID registered on more than one device. In my case, we have two iPhones--one for me and one for my wife--but with the same App Store account. So, when I sent an sms via iMessage for the Mac, the receiver was shown my wife's iPhone number.
    I hope I have been clear enough, you know, explaining this in a foreing language is always painful...
    Ciao,
    Antonio
    P.S.: this could be true for similar issues (iMessage wrong sender) that I've read in the Mountain Lion, iPad and iPod forums.

  • Email Link populates  the wrong name in the To space

    www.tjudisharts.com is the url
    Perhaps this is beyond the scope of this forum, but maybe someone can point me in the right direction.
    my client has 2 email names [email protected] and [email protected], they are provided by Go Daddy which is where the site is hosted. no matter which email address you use the email gets to the correct email address. on this website i have an email link in 2 places (home page and contact page), each link says [email protected], and the address it goes to is the correct address.
    The problem is that in the "To" space of the email that is generated, the name shows as GalleryT, a name we are trying to phase out.
    My client uses Entourage as his email program, and since I don't I don't know anything about it I don't know if the problem is there
    I don't know where the problem lies, godaddy says it is in the code and I have to correct it( generally in iweb you don't change the code)...and I don't know where or how... could it be just a setting in Entourage
    Any ideas of how I might proceed. Any help is appreciated.
    Thanks,
    mary

    Difficult to say.
    Does not exist : http://www.tjudisharts.com/
    Does not exist : http://tjudisharts.com/
    Does not exist : http://www.galleryt.org/
    Does not exist : http://galleryt.org/

  • In Mail - emails arrive with the wrong name?

    I am receiving emails both in general and from FaceBook with the wrong name as the sender.  Today I received an email from "Jerri" and the name shown was "Marilyn".  I also receive all my FB emails from 'Dina'  and they are from all kinds of different people.
    I'm on a MacBook Pro, 10.10.2.  I looked on FB to find an answer, but can't find anything, but it must be with Mail, as the emails arrive from anyone direct (not from FB) and they are wrong.  I did just rebuild Mail, but the same wrong names are there.
    Thanks anyone, Cheryl

    It is an excellent question .. it used to happen when I ran my first Mac on snow leopard but I have never pursued the reason until I saw your question.
    Here is a useful reference.
    http://apple.stackexchange.com/questions/55416/my-mac-minis-computer-name-keeps- changing-when-it-resumes-from-sleep
    Something is faulty in the main router. That it is a TC is no surprise really.. they are far from being great routers.
    Of course if this didn't happen on previous OS but is now happening since you moved to Yosemite.. well you know where the blame lies.. although how Yosemite is affecting it I don't know.
    Since I moved everything to Asus router I no longer have the problem. But my Mac was up to (5) and I thought this is getting ridiculous.
    Let me copy and paste the answer and kudos to the guy who posted it.. Jon not me.
    I've seen this happen when the local DNS server has DNS caching enabled, but doesn't flush the cache often enough (or at all).
    You can set your Host Name/Computer Name to a static value using scutil in Terminal. This means that your Mac will no longer change it's name automatically, so it's important that there are no other machines on your network that actually have that hostname. When you run this, replace "new_hostname" with your desired hostname:
    sudo scutil –-set HostName new_hostname
    sudo scutil –-set LocalHostName new_hostname
    sudo scutil –-set ComputerName new_hostname
    You can check to make sure the values are set by running:
    sudo scutil –-get HostName new_hostname
    sudo scutil –-get LocalHostName new_hostname
    sudo scutil –-get ComputerName new_hostname
    When you do this you might keep getting errors that another computer of the same name is on the network.. just reboot the TC to clear the DNS cache.
    Or if that doesn't work you will need to clear the cache from the local computer.

  • Capture window always uses the wrong name-

    Hello everyone, I'm having this problem… when I go to capture HDV footage the Capture Window always remembers the name of the LAST clip I captured, when I change it and do all my capturing I find out that all my clips (and with HDV that can be a lot) have still retained the wrong name (in the browser and on my scratch disk). I tried trashing preferences and it works for the first time and goes back to this. Any help would be much appreciated. Thanks!
    Also I am using someone else's computer which is a G4 (not my macbook listed below).

    xorg.conf:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0"
    InputDevice "Keyboard0" "CoreKeyboard"
    InputDevice "Mouse0" "CorePointer"
    EndSection
    Section "Files"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/psaux"
    Option "Emulate3Buttons" "no"
    Option "ZAxisMapping" "4 5"
    EndSection
    Section "InputDevice"
    # generated from default
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    DisplaySize 360 203
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    # Option "UseEdidDpi" "FALSE"
    # Option "DPI" "96 x 96"
    EndSection
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    Option "NoLogo" "1"
    Option "TripleBuffer" "1"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    Modes "1360x768_60.00"
    EndSubSection
    EndSection

  • In Mail, the "From" line shows the wrong name associated with the email id. How do I update it?

    In Mail, the "From" line shows the wrong name associated with my email ID. I've looked over preferences and account information but have not found where I can update it.

    There isn't an email address associated with the contact name who appears as the "from" in Mail. It used to be a shared email address and I already had updated the contact to list only the phone number in case that was causing the problem. 

  • AirDrop showing the wrong name and picture with iOS 7

    AirDrop is showing the wrong name and picture on my wife's phone....It is showing my name and picture.  She has an iPhone 5 and I just updated her to iOS7 about an hour ago, same time as I did mine. Is it because we are connected with the same Apple ID and if so, how do I fix it?  She is annoyed by it and not seeing where I can change it in the settings is beginning to annoy me.  Help!

    I don't think that's the issue.  I'm having the same problem.  My wife, my son, and I all use the same Apple ID, but we have different email addresses and phone numbers for facetime and imessage (we've never had an issue with imessage or facetime).  Today, I updated my phone and ipad to ios 7 and tried to experiment with airdrop.  On both devices it showed my son's name.  Then my son updated his ipad and we tested airdrop again.  His ipad shows up on my phone and ipad with his name as well.  The email address that I use for Apple ID is not associated with him on any device.  His name is not listed on our Apple ID account.  One of them shows his photo that he uses for his facebook profile, but the other's just have a gray circle with his first initial.  I'm hoping it's just a bug that will get fixed soon, but if anyone knows a fix, please share.

  • I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

    I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

    SOLUTION
    Open "terminal" on your mac and type the following:
    defaults write com.apple.mail IgnoreSortOrderWhenSelectingAfterDelete 1
    (copy and past the whole line)
    This will stop that behaviour in mail. 
    It works on most opperating systems.
    mine is.
    Mac OSx 10.7.2 Lion
    Cheers

  • How do I send an email with a group address and not show the addresses/names of the recipients?

    How do I send an email with a group address and not show the addresses/names of the recipients?

    Use BCC.   That's blind carbon copy.   And copy paste the address into the BCC field.  It really depends what e-mail program you use how to enable BCC.

  • I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

    I run 3 email accounts on Mac Mail, all 3 disappeared after doing the latest OS X update. I have tried adding the accounts back but no mail appears. Help!

    The mailbox list is divided into categories with headings in caps, such as ON MY MAC. When you hover the cursor over one of those headings (except for MAILBOXES), you should see the word Show or Hide on the right. Click Show. The  MAILBOXES category can't be hidden.
    In each category, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small disclosure triangle. If the triangle points to the right, click it so that it points down.

  • IPhoto - My iPhoto is not responding. When I click on iPhoto I get a never ending spinning beachball.  I almost think it is looking in the wrong place for the pictures.  How do I redirect it back to the Mac hard drive?

    My iPhoto is not responding.  Whenever I click on the iPhoto icon I get a twirling beachball.  It is as if the machine is looking in the wrong place for the photos.  How can I see where the machine is looking to find out if this is really the problem.  How can I see the path?

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
    If that's the case  Apply the two fixes below in order as needed: 
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • The hard drive on my MacBook died and I had it replaced. I can't locate my website files and every time I try to open my idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password?

    The hard drive on my MacBook died and I had it replaced. Now I can't locate my website files and every time I try to open my finder/idisk it looks for a name and password (even reset my apple id as prompted) I keep being told that it's the wrong name or password? Any suggestions out there

    Arty ~ Welcome to the Support Communities. iWeb can't import/open published HTML/media files on your iDisk. iWeb can only open its key Domain file which contains your site data — it's usually located here:
    ...If you don't have a backup of your Domain file (e.g. via Time Machine), paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWeb_Backup_retrieve.html
    Also this thread may help:
    Hard Drive replacement causes new/unknown user password?

  • For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    For some artists in my Music app on my I-phone, the songs do not appear when I search by the artist.  However, if I search the album name, all the songs show.  How do I get the songs to show under songs?

    Hi Spam_Valley,
    I understand that you are having issues with your music displaying correctly. This may be an issues with the metadata stored within that song, and iTunes interpretation of that info.
    We may need to repair this. See the following resources for information:
    iTunes 10 for Windows: If song titles don’t appear correctly
    http://support.apple.com/kb/PH1468
    Fixing Incorrect Song or Album Listings in iTunes
    http://support.apple.com/kb/TA24677
    Thanks,
    Matt M.

  • How to display the RFQ Number as the Document Name in the E-Mail output.

    Hi All,
    I want the Document Name of the E-Mail Notification of RFQ to be the RFQ Number itself.
    For eg. RFQ E-Mail-60000015096.pdf
    How can this be configured?
    Thanks,
    Muneer.

    Hi,
    I have done the changes for PO. Its working fine.
    But its not working for RFQ.
    For eg, for PO its displaying as "PO E-Mail 45000xxxxx".
    But for RFQ its just displaying "RFQ E-Mail" - Number is not coming.
    I have used the text as "PO E-mail &EKKO-EBELN" for PO.
    And for RFQ, I'hv used "RFQ E-Mail &EKPO-ANFNR".
    Thanks,
    -Muneer.

Maybe you are looking for

  • Setting privilege level for logging into ASA through ACS

    Hi!, In my environment i implemented AAA for logging into switches, routers, asa etc through ACS which is being configured TACACS+. I have set different privilege levels like readonly, readwrite etc into ACS. There are working fine when i try to logi

  • Mistake message with file .mov

    In PremierPro CC has a problem with a file .mov says "file has no audio or video streams", but I was working with that file and others, in quicktime error-free reads are not damaged, that I can do? as rescue nearly completed projects?  thanks

  • STSUPLD.DLL not recognizing as an add-on; upload multiple documents disabled

    On my client system, Windows XP, Office 2007 and IE8 is installed. It is a 32 bit system. On the Sharepoint site, "upload multiple document" feature is disabled. After searching for the cause, I came to know about the STSUPLD add-on that needs to be

  • TIMESTAMP in Oracle 8(i)

    I'm not sure if this is the right place but... Does Oracle 8 support the TIMESTAMP datatype based on SQL-92? Thanks, Mat.

  • I need to reinstall my photoshop elements 3

    I have a legally purchased Photoshop elements 3.0  which I  really like and use regularly.  I need to reinstall it and I keep getting the message that the  serial  number  is invalid.  I registered the product when I got  it it.    The number  am usi