.Mac Mail, Yahoo & Leopard Mail - How to get all in sync?

Hi there,
I'm trying to get .mac mail to syncronize my yahoo mail and all the folders to my computer and .mac. However, it appears that .mac webmail is not pulling in what is on Yahoo or my computer. Does anyone know what the settings are?
Thanks!

>>I have Admin credentials[ Username and Password] , by using this i need to Access all user's mail boxes and Contacts.
Admin credentials mean nothing in regards to Mailbox access, so to use delegate access you would need to grant rights to the every Mailbox using Add-MailboxPermission (or if you only want access to the Contacts folder use add-mailboxfolderpermission
to add/change rights on the contacts folder) or you need to setup and use EWS Impersonation
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx .
>>And i read aboutimpersonation that all needs permissions.
By default the only user that can access mailbox content is the owner of the mailbox, you will only be able to access content in a Mailbox if its has been shared with you or you grant youself rights to the mailbox using Exchange Admistrative credentials.
All of this will leave an audit trail.
Cheers
Glen

Similar Messages

My mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

my mac book air can't start installation, because i use windows installation in DOS to make partion, now no mac os on it. How to get back the mac os? i have a window based iso image from a friend, because in my country there is no Apple service.

It sounds like you destroyed your boot partition and the recovery partition. Depending on it's age, your MacBook Air might be able to do a net boot. Plug and ethernet connection into it and attempt to boot. If it has the right firmware, it will find a net boot configuration on the net and boot that. Then it will give you a Recovery Partition like display and allow you to reinstall the OS X version that came with it.... assuming that it was Lion or ML. If your computer came with Snow Leopard, then even the net boot won't work.
At that point you need a bootable USB Key, or an external DVD drive AND a Snow Leopard installation DVD.
An Apple Store, if there is one nearby, MAY be able to get you going again. However, whatever is on the SSD now will be toast too.

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?

I have a 4s iPhone which I loaded the new Os on last night. Now I can not connect to iTunes. A message comes up saying i need 10.6.3 or later but I am running 10.6.1 as I have an older Mac. Anyone have ideas how to get this to work?

Its not telling you to update your iPad, its telling you you need to download a recent version itunes on your computer.
Go here to download the newest version of iTunes.
http://www.apple.com/itunes/?cid=OAS-US-DOMAINS-itunes.com

How to get all rows that are returned in inner sub query of select statemen

If a sub query in select statement returns more than one row than how to get all those returned rows in the final
output of the query .It will be all right if all column's value repeat and that multiple output of inner query comes
in another column .
How to get that ?

As Frank said, you likely want a join, and likely an outer join to replicate the select in the projection. Something like:
SELECT id,stat, section, USER_ID concerned_person
FROM table_all,
left join table2
    on room_id = sectoion and
       sur_role = 'r001'
WHERE section IN (SELECT code
                  FROM t_area
                  WHERE dept= 'p002')An alternative, depending on where and how you are using the statement would be something like:
SQL> WITH t AS (
2    select 1 id from dual union all
3    select 2 id from dual),
4 t1 as (
5    select 1 id, 'One' descr from dual union all
6    select 1, 'Un' from dual union all
7    select 1, 'Une' from dual)
8 SELECT t.id, CURSOR(SELECT t1.id, t1.descr from t1
9                      WHERE t1.id = t.id)
10 FROM t;
                  ID CURSOR(SELECTT1.ID,T
                   1 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
                  ID DESCR
                   1 One
                   1 Un
                   1 Une
                   2 CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
no rows selectedJohn

How to get all the values from the dropdown menu

How to get all the values from the dropdown menu
I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
How do I get number of item is selection dropdown?
How do I extract a ?name? for each value, one by one?
How do I change a selection by referring to particular index of the item in a dropdown menu?
Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
Message was edited by: testtest

The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
<Select Name=ProdType ID=testProd>
</Select>
I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
If I want to search by id I could do the following:
Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
You can use the FindElement to grab links, text boxes, etc.
The next example grabs from a link on a page
Home
Set x = RSWApp.om.FindElement("Home","A","innerText")
I hope this helps clear it up.

How to get all users under an organizations?

Hello everyone.
Just want to know if anyone knows how to get all users under a particular organization.
From the Search User form, I found they may kind of user such attribute conditions:
MemberObjectGroup
is in
XXXX(organization)
But unfortunately, the "is in" is not a valid AttributeConditionOperator, so besides using "recursive" self-written function, anyone knows any possible buit-in trick?

Here is my solution:
<Rule'>
    <RuleArgument name='organization'/>
    <RuleArgument name='context'/>
    <block>
        <defvar name='orgs'>
            <new class='java.util.ArrayList'/>
        </defvar>
        <invoke name='getChildObjectGroupNames'>
            <invoke name='getObject' class='com.waveset.ui.FormUtil'>
                <ref>context</ref>
                <s>ObjectGroup</s>
                <ref>organization</ref>
            </invoke>
            <ref>orgs</ref>
        </invoke>
        <append name='orgs'>
            <ref>organization</ref>
        </append>
        <invoke name='getUsers' class='com.waveset.ui.FormUtil'>
            <ref>context</ref>
            <map>
                <s>conditions</s>
                <list>
                    <new class='com.waveset.object.AttributeCondition'>
                        <s>MemberObjectGroups</s>
                        <s>in</s>
                        <ref>orgs</ref>
                    </new>
                </list>
            </map>
        </invoke>
    </block>
    <MemberObjectGroups>
        <ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
    </MemberObjectGroups>
</Rule>

How to get all INDEXes from a database

How to get all INDEXes in a database? I need to store them in script file (.SQL). My database version is 10.2.0.3.0.
Edited by: Iniyavan on Sep 18, 2009 1:39 PM

--Thanks, Koppelaars. The second query works. But I'm unable to store in spool file. May be it's due to CLOBs in the output. I did the following:
set head off
set feedback off
set linesize 32727
set pagesize 50000
spool c:\indexes.sql
select dbms_metadata.get_ddl('INDEX',INDEX_NAME,'MYSCHEMA')
from user_indexes;
spool off
--In the spool file, I find only this
CREATE UNIQUE INDEX "MYSCHEMA"."A" ON "MYSCHEMA"."BNK_DEALID" ("DEAL_ID")
PCTF
CREATE INDEX "MYSCHEMA"."ACCENT_RAC_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "VAL
CREATE INDEX "MYSCHEMA"."ACCENT_REPORT" ON "MYSCHEMA"."ACCENT" ("SCHEME", "APP_REF
CREATE UNIQUE INDEX "MYSCHEMA"."ACCENT_X" ON "MYSCHEMA"."ACCENT" ("DEAL_ID")
P
CREATE UNIQUE INDEX "MYSCHEMA"."ACCNAV_X" ON "MYSCHEMA"."ACCNAV" ("SCHEME", "ACCNA
--How to get all the DMLs in one SQL file?
--Nagappan, I'm using WIN.

How to get all data from nokia to i5s

how to get all data from nokia E71 to i5s???

if you can put those data in your computer then add it in iTunes. your iPhone 5s should get it thru syncing.

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How to get ALL validate-errors while insert xml-file into xml_schema_table

How to get all validate-errors while using insert into xml_schema when having a xml-instance with more then one error inside ?
Hi,
I can validate a xml-file by using isSchemaValid() - function to get the validate-status 0 or 1 .
To get a error-output about the reason I do validate
the xml-file against xdb-schema, by insert it into schema_table.
When more than one validate-errors inside the xml-file,
the exception shows me the first error only.
How to get all errors at one time ?
regards
Norbert
... for example like this matter:
declare
     xmldoc CLOB;
     vStatus varchar
begin
-- ... create xmldoc by using DBMS_XMLGEN ...
-- validate by using insert ( I do not need insert ;-) )
     begin
     -- there is the xml_schema in xdb with defaultTable XML_SCHEMA_DEFAULT_TABLE
     insert into XML_SCHEMA_DEFAULT_TABLE values (xmltype(xmldoc) ) ;
     vStatus := 'XML-Instance is valid ' ;
     exception
     when others then
     -- it's only the first error while parsing the xml-file :
          vStatus := 'Instance is NOT valid: '||sqlerrm ;
          dbms_output.put_line( vStatus );
     end ;
end ;

If I am not mistaken, the you probably could google this one while using "Steven Feuerstein Validation" or such. I know I have seen a very decent validation / error handling from Steven about this.

How to get all previous versions page contents of a publishing page using SharePoint Client Object Model 2010

How to get all previous versions page contents and other field values of a publishing page using SharePoint Client Object Model 2010?
Thanks,
Osmita

Hi Osmita,
Greetings.
Here are the links that helps you. It has code attached to it.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/a0d2ab40-99ba-4368-8505-1dc559ef6469/get-content-of-previous-version-of-page-sharepoint-2010?forum=sharepointgeneralprevious
http://social.technet.microsoft.com/Forums/sharepoint/en-US/faaf419f-997e-4150-9911-48cc375c3b46/how-to-get-previous-published-versions-of-publishing-pages-in-sharepoint-2010?forum=sharepointdevelopmentprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

How to get all the values from a HashMap? thanks

hi
can anyone tell me how to get all the keys and their values contained in a HashMap? thanks

thanks to u all for ur response, i gues if i need to get both keys and values, i need to use keySet() to get a set of keys first and then using each key to get value. is there any other faster way to get both of them (key and value)? thanks again

How to get all the values of a variable with F4 with checkboxes to select

Dear Experts,
After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
I hve tried by deleting the Delete Personalization also,but no use.
Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
Thanks in advance

Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

How to get all signature fields in a .pdf from C#

Does anyone have some sample code that shows how to "iterate" all signatures in a .pdf from C#? Using the SDK and the Javascipt object model I know how to sign a document but I can't figure out how to "get all the signatures". Basically I want to open a .pdf file and then (from C#) find out what persons currently have signed the document. I guess I need to iterate all signature fields and then get the SignatureInfo object, or?
Anyone?
Cheers,
Calle

I am afraid this don't help me. How do I get the "data" back to C#? Looping all fields in in JavaScript is probably "easy" but I simply can't figure out how to get access to the data from C#. Any one have a suggestion on the best approach?
Thx,
CJ

.Mac Mail, Yahoo & Leopard Mail - How to get all in sync?

Similar Messages

Maybe you are looking for