Mac Map Loader ceased to work

Hello,
My computer is a MacBook Pro running OS X 10.5.8 with the latest versions of Multimedia Transfer and Map Loader installed. A few weeks ago, after an upgrade of the Maps app on my 5800, Map Loader told me I needed to upgrade my maps, and started to do it. It managed to delete all the existing map data on the phone but never managed to install any, after going through the entire process of downloading and trying to install.
I didn't do anything about it because I was due a phone upgrade anyway - now I'm using anN8 but rather than the issue being fixed, as I expected, it is still the case. The Map Loader tells me my current data is out of date (despite its consisting entirely of data downloaded in the last day since I had the phone) but fails even to finish the tediously long process of deleting it, much less installing new maps.
I really like the Maps app. Being able to pre-install maps over my home network before I go abroad is one of the major reasons I opted to stick with Nokia!
Any help would be greatly greatly appreciated.
Cheers,
Ben
Solved!
Go to Solution.

Hi Ben
Unfortunately this issue has been around for a considerable time now and the only way currently is to directly download required maps using procedure outlined by ovikovi here
Maps 0.1.25.114 Manual download
You may find this thread of use for merging individual country/state/region
Mac Alternative to Nokia Maploader
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

Map Loader doesn't work at all!

I have read on the forum that you can load down maps to your N95 with Map Loader to avoid traffic costs.
I failed to do it regards many try.
I have a HP PC with Vista Business. I begin with upgrade of PC Suit on it (6.84) and I updated Maps software on N95. I downloaded Map Loader from Nokia Site (1.2) and started it. I get a message that I should use GPS once before I use Map Loader. So I did it and drive a bit of road with it. It worked pretty well, I didn’t try voice guides yet.
Thereafter I connect N95 by USB cable in memory mode to my PC and started Map Loader. I get the warnings screen as usual and after I choose OK I get error message, something like that: Unexpected error occurred, sorry for inconvenience, try again later!
I tried all I could without success, please help before I’ll get creasy :-)
Piko

01-Oct-200709:21 PM
selintra wrote:
Read the maploader error message more carefully!
You simply have to put your phone into the correct mode.
Connect your phone and select mass storage (NOT PC Suite). Start map loader and it will download direct to your card.Message Edited by selintra on 01-Oct-200709:22 PM
Thank You for your concern!
I have read very carefully the error message, be sure of it. The problem was that when I connected my N95 via USB I get the choice: PC Suite mode or Mass storage mode and I choose Mass storage mode, precisely as you have suggested it. But it did not work! I was frustrated as I said before.
But it says DATA TRANSFER MODE, not Mass storage mode, doesn’t it?
I red the other post in this forum which describe how you put your USB connection port on your phone in to this mode.
Go to Tools > Settings > Connection > USB > USB mode = Data transfer
I did it and EUREKA! It works  And more! Now when I connect my N95 to USB port it ask me if I want connect it in DATA TRANSFER mode or not!
I do not know why it didn’t do it before, but that was my problem!
Piko

Map Loader Can't Load maps to 5230 on Mac OSX

When I start Nokia Map Loader application for dowloading maps on Nokia 5230 I get an error message saying :
The following errors occured while transferring files. If the error is not permanent, you can try starting the file transfers again.
config.cfg file couldn't been found. operation forbidden
config.cfg file couldn't been found. operation forbidden
I can't download maps on the phone because the region list is empty (it is not supposed to be).
This happens every time I try to use the Map Loader.There are screenshots of the same problem on another forum: http://betalabs.nokia.com/apps/nokia-map-loader-fo r-mac/bugreport/configcfg-operation-forbidden
Operating system is Mac OSX
Thank you for your help.

Hi all my experience with map loader is similar and I'm hoping for dramatic improvements to enable me to successfully load maps to my 5800MX, apols for the length of my post but I have just spent 12 hours trying to get MAP loader to work and have found and fixed a number of issues that I hope will help some people, I have also found a no of shortcomings in the software and am hoping for Nokia to take note and apply some fixes.
1. I got rid of the config.cfg error message by loading maps on my phone and changing the memory card location to drive E: I then waited for a satellite connection and found location, then connected to my MacAir running 10.6.4 OSX. Prior to running maps on my 5800 I had the config.cfg errors.
2. BEWARE that if you are connecting a phone that has not been synced using nokia MMT before or one that was previously synced but had the music etc deleted (like my 5800 because I formatted the memory card) then initially the NMMT symbol flashes as if it is working, BUT shortly after it will remain static and then the color wheel will appear when you float the mouse over the NMMT icon, this can give the impression of a complete software lock upand in my case only after 2 forced quits and reboots not altering things I decided to leave the MAC in this state , low and behold some 40mins later NMMT started showing a status of music and photo transfer . SO NOKIA please fix this your software appears to be totally hung but it is merely working so something needs resolution in my view as there really is no indication that the software is running and in "force quit" the software shows as not responding.
3. MAP LOADER, - initially upon loading map loader it reported "phone cannot have maps or is not compatible" however this was because my default memory card (on the 5800 maps, settings ,maps, menu) was C: and I had not actually re-run maps after formatting my memory card (see note 1 and 2) . Changing the default memory location in maps on the phone to E: allowed map loader to run. Then I had an issue that the map regions were not showing in the left column, the software simply showed nothing and I had nothing to drag into my phone for upload. This was resolved by getting a faster internet connection. Internet Speed and Reliability - Now (still not resolved) I have a faster internet connection I have loaded MAP loader and have dragged all of the relevant maps to the right. I click on upload/download maps and the software stars the download process but takes an eternity to download maps, last night I left the software for 7 hours and still no maps were downloaded, In addition to this I have to leave my phone connected to my MACAIR the whole time I am attempting to download, so I can't even download maps from nokia and upload them to my phone at a later date. I think this is due to my internet connection speed but I am using bittorrent to frequently download torrents which works fine so it cannot be that bad. So MY REQUEST to NOKIA software development for MAP LOADER is can we please have some software that is designed to run on an internet connection that is less than 500K (it looks like you developed it on a 1GB LAN connection). IE why do I have to connect my phone for MAP loader to start in the first place OR Can't you put an option in the SW to allow the Nokia phone to be disconnected after downloading commences (ie if this is a licensing issue) so I can freely use my phone whilst maps are downloaded on my MACBOOK when Im not in the office ? Could you employ a capability like bittorrent in the downloader so we can download in portions when we have access to the internet ? Why is your MAP loader so slow ? IE I happily download 100M updates to MACOSX and ITUNES over these internet connections but MAP LOADER just WONT WORK, OR works so slowly and cannot recover from slow internet connection states that it is unusable ?
4. As I have a MACAIR I only have one USB port so was hoping to connect my 5800 with Bluetooth so I can run maploader whist I am connected to my USB mobile internet. Unfortunately I was unable to get the MAP loader to recognize my 5800 via bluetooth , I loaded the software , chose use bluetooth and it continually searched with no connection found. This is despite me having the devices paired, I have used bluetooth connections for both isnc (calendar and contacts sync works fine) and for NMMT. NMMT recognized the 5800 bluetooth connection in the dropdown menu but MAP LOADER completely failed to recognize it. NOKIA please allow a BT connection with the nokia 5800 so I can run this combination, OR simply allow me to disconnect my phone whilst I am on the internet downloading my maps, then once maps are on my local MACdrive I can just disconnect from the internet and uploads maps to my phone.
That's it, in short MAP Loader for MACOSX 10.6.4 seems unworkable in its current form unless your connected to an 8M internet connection or the Nokia development LAN. Please fix ASAP

Map Loader v1.1 fault

this latest version of Map Loader don't works fine.
Downloading large maps (like Lombardia or Emilia Romagna of Italy nation greather than 20M) Map Loader stops sending this message "CONNECTION TO THE STORAGE MEDIUM HAS BEEN INTERRUPTED ATTACH YOUR STORAGE MEDIUM AND RETRY".
This happens with a memory card or N91 phone used like "mass storage".
On computer run Windows XP sp4.
Can anyone help me ?

right guys i appear to have sussed it.......as said above i had the lost connection to media after downloading etc.......its a problem with maploader 1.1 it downloads to a temp file then transfers to your memory card and this is where the problem is.......now ive downloaded map loader version 1.0 and thisdownloads directly to your memory card...and hey presto bobs ur mothers brother and fannys ur dads sister it works a dream.... i know have full uk mapping on my new sandisk ultra 2 2gb card....w000t......
link below is where i downloaded version 1.0 from....
http://www.opendrivers.com/driver/23...-download.html
hope this helps guys......andy
as a side note when i spoke to a nokia techy on fone today his only explanation was that the memory card wasnt a gen nokia one so there fore must be at fault lol.......i wouldnt pay some of them with week old mushrooms.......

Map loader/ software updater problems

I have had my N95 for about 2 weeks and have spent hours trying to get gps to work. I have just been following someones instructions on another thread but fell at the first hurdle. Nokia recommends that I install Nokia maps up date prior to installing map loader, then map loader recommends I download and install nokia sofware updater. Problem there is I get an error message half way through saying minimum requirement is 256mb memory. I have loads of memory so I don't understand why this is happening.
Can anyone help? You will need to keep it simple!!

Hi,
But the problem is in RAM memory of Your PC not in this on Your Hard Disk Drive (59,95GB). This memory is mounted on motherboard of your PC. Check inner configuration. Control panel - system. If it's lower then 256MB, you have to buy another block of RAM. And how big is your SD card. Besides nokia map loader doesn't work now. See the topics below yours. Some problem with software update version 20. Maybe if you didn't updated older v.12 soft. it should go.
N95 & N96 User

Nokia Map Loader 1 .1 for Mac not working on Mac O...

Hi to everybody. I'm very angry with Nokia support (is there a support ?) about Mac. I'm talking about Nokia Map Loader with N82 with Ovi maps . I reformatted my memory card, started Nokia Map Loader to download and put maps on my memory card and every time i get an annoying message "File 80.cdt might be in use". I read in the forum that many other users have this problem and someone has found a long and complicated workaround. But is it possible that Nokia hasn't solved this problem ?
We've been waiting 2 years when Nokia announced a Mac Ovi suite program which never has been released. Of course, my next phone will probably be an Iphone .
Please Nokia, fix it .
Thank you very much for your attention.

fable wrote:
well, not i'm not trying anymore to format the memory card since as you read a friend lent me his Windows XP-based notebook to download them to my N82.
You won't need to use this method of merging map data upon Mac fortunately:/t5/Pool-of-Knowledge/Apple-Mac-How-to-update-OVI-Maps-on-device-if-Nokia-Maploader/td-p/794472
Happy to have helped forum with a Support Ratio = 42.5

N97 Mini Map Loader using Mac OS X failed to load ...

Nokia N97 Mini
S/W v 12.0.110
Nokia Maps Loader 1.0 (770) on Mac OS X 10.6.4
I'm trying to load map for INDIA (121.1 MB). While in progress, the software shows me a message "52f40.cdt: File couldn't be uploaded. The file or folder might be in use"
I repeated the sequence many times but it eventually fails.
Any help appreciated.
F

Same problem with downloading nokia maps for India.
Phone NOKIA 5800
Mac OSX 10.5.8
After quite a few minutes of downloading (seems so)
Error message appears: 55f69.cdt File could not be uploaded. The file or folder might be in use.
Please help.....

Nokia Map Loader

Anybody tried using the Map Loader PC App? Any Luck? Mine always says the server is offline or connectivity interrupted...
N8-00,Galaxy Tab 10.1

Vaidovesta wrote:
So this means there's no stand-alone Maps downloading app, like SW Updater...
Apart from Nokia Maploader for Mac which works for devices using up to Ovi Maps v3.04
Happy to have helped forum with a Support Ratio = 42.5

Map Loader Bug Re. Lost Internet Connection

Don't really know how to alert the programmers behind the Map Loader software to a fairly major software bug.
If the internet connection is - even very briefly - interrupted for even a second, the Map Loader software gives an error message.
BUT - big problem - the map selection CLEARS so you can't resume from where you left. Nor can you see which maps had successfully downloaded while the connection was active, so you have to download the WHOLE list again.
Please update for the next release.

D-Park,
Welcome to the HP Forum.
If you were using MAC filtering on your router, you would know how to fix this. If you do not know what it is, you do have have MAC filtering enabled on the router -- or you are not the router administrator. So -- don't worry about MAC filtering or go find the router administrator and ask to be let in (you will need the MAC address of the printer -- get a print out of the network page from the printer).
===========================================================================
Loss of network connection
Ordinarily I would suggest you reinstall the Full Feature Software for the printer because the installation can resolve a variety of ills associated with a disconnected wireless printer.
Install Full Feature Software - Printer
You did say the printer lost Internet connection -- this is a bit different from losing connection from your home network. You seem to be implying that your printer has lost its ePrint connection without actually saying you have lost ePrint.
The following document can help with both a disconnected wireless printer that is not cooperating -- even after you have tried reinstalling the Full Feature Software, for example -- and the document has a link to the ePrint Help and Tips documents that might help you if the issue is just one of ePrint and an Internet connection having to do with the printer and its connection to that service.
Wireless Printing Center
Take a look around at the sections -- you might start at the Troubleshooting steps and see what jumps out at you -- you might find your "issue" is right there and you can find the steps to fix it right away.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Noka Map Loader without maps

Good morning from Italy
There is a problem that i hope to solve soon
I Installed Nokia Map Loader for Mac (up-to-date) yesterday (thanks to your forum),
but the list on the left side (where should be the maps) is empty, i can see only Update Entries & History...
So i have now the Nokia Map Loader connected with my mobile, but no maps on it to drag & install.
Is there a problem with this software, or any way to update the map list?
Thanks in advance,
Fabrizio

Tnx scoobyman.
The 4 GB card was new and I "formatted" it by running Maps on my 6303 once. The download problems however, already started with the original 1 GB card which contained Spain only. Two of those files are well protected against transfer (to my PC and thus to the new 4 Gig card).
DL of Europe completely stopped after 2%. Repeatedly. I had to break up Europe into the countries and then break up the major countries into their parts. I really didn't want to do that because I read in this Board that it'll give problems in navigating 'across borders'. Italy was no problem whatsoever, nor were most country files smaller than 50 MB. Guess I was very lucky that Sweden (80 MB) worked after 5 tries.The England part of the UK is IMPOSSIBLE. (As are Poland and Finland.) My traffic counter on England alone exceeds 2 GB! BTW: I shut down my firewall (ZA) and the XP firewall. I also closed all background programs that might try for Internet access (such as Skype and MSN). All to no avail.
All I can think of is that something -a special character sequence- in these three country files stops the data transfer. Maybe in my ADSL modem? As such I was thinking along the lines of changing the packet size of the TCP/IP protocol. Which I succesully did years ago with Windows 98 SE and a dial-up modem . . .

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
          com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
          com.rogueamoeba.InstantOn          Version: 6.0.2
          com.rogueamoeba.InstantOnCore          Version: 6.0.2
          com.Cycling74.driver.Soundflower          Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
             [not loaded] com.adobe.fpsaud.plist
             [not loaded] com.adobe.SwitchBoard.plist
             [not loaded] com.bombich.ccc.plist
             [not loaded] com.dymo.pnpd.plist
             [not loaded] com.intego.BackupManagerPro.daemon.plist
             [not loaded] com.micromat.TechToolProDaemon.plist
             [not loaded] com.microsoft.office.licensing.helper.plist
             [not loaded] com.orbicule.witnessd.plist
             [not loaded] com.sierrawireless.SwitchTool.plist
             [not loaded] com.stclairsoft.AppTamerAgent.plist
             [not loaded] org.macosforge.xquartz.privileged_startx.plist
             [not loaded]          pcloudd.plist
Launch Agents:
                 [loaded] com.divx.dms.agent.plist
                 [loaded] com.divx.update.agent.plist
                 [loaded] com.epson.epw.agent.plist
                 [loaded] com.lacie.raidmonitor.daemon.plist
                 [loaded] com.lacie.safemanager.daemon.plist
                 [loaded] com.micromat.TechToolProAgent.plist
                 [loaded] com.orbicule.WitnessUserAgent.plist
                 [loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
             [not loaded]          .DS_Store
                 [loaded] com.adobe.AAM.Updater-1.0.plist
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                 [loaded] com.divx.agent.postinstall.plist
                 [loaded] com.google.keystone.agent.plist
                 [loaded] com.propaganda.dejavu.dvmonitor.plist
                 [loaded] com.valvesoftware.steamclean.plist
                 [loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
          iTunesHelper
          Synergy
          TomTomHOMERunner
          Dropbox
3rd Party Preference Panes:
          Déjà Vu
          Flash Player
          Flip4Mac WMV
          GR-55
          Paragon NTFS for Mac ® OS X
          Perian
          Printopia
          TechTool Protection
          Witness

I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing prev

I dont recall when I have been more frustrated.... the "loops" I am in on the web for support are endless. After downloading Yosemite on my Mac my CS6 no longer works. On your support web site you state the following for downloading and installing previous versions of apps, such as CS6 " 1. open CC for desktop and go to the apps panel (no link is provided so I explored until I could download a trial version of "application manager" as that was required. When I attempted to open it to download "Previous Versions" I could not. I have my license number, my CS6 will not open in Yosemite and after over 2 hours I am really frustrated.... Rich@

When I go to that link, download and then attempt to install I get the message "Webe encountered the following issues, Installer failed to initialize. Please down load Adobe Support Advisor to detect the problem" I then select the link "get adobe support advisor" that takes me to a site that describes a better support link since the one I have been sent to is no longer available. I then go to that site and am told to go to CC for desktop apps, that requires me to download CC... I don't want CC.. just want to have my CS6 PS work again.... so frustrating...

Dual Monitors on Mac Mini Late 2014 not working on Dell S2340Lc

Hey guys,
Got a mac mini and using it mainly for work. Working for an ISP and no one has used macs and I've opted to be the poor sucker that gets to deal with old people that don't know how to mac very goodly.
I have two Dell S2340Lc monitors. I have one connected up via HDMI and that works perfectly fine. I turned off the mac, I plugged in Monitor 2 with a MiniDP/Thunderbolt to HDMI adapter, powered on the mac and whilst it was booting, it had the Apple logo and the loading bar on the Dell display plugged in to the thunderbolt to hdmi adapter and then once it loaded up the log in screen, it went to the HDMI display. I logged in and in the displays section, the monitor plugged in to the thunderbolt to hdmi adapter isn't being detected, however I can plug it in to a Samsung 55 Inch Smart TV and it works just fine. I can set up dual monitors between the TV and the monitor in HDMI, but the Dell S2340Lc will only work with a HDMI cable into the HDMI port on the mac mini and will not work through the thunderbolt to hdmi adapter. On the display it just says that there is no signal coming from the computer.
Just wondering if any of you apple gurus had any ideas as to why this isn't working?
Thanks!

What if you switch monitors?
What happens if yo only have the Thunderbolt>HDMI>Dell monitor connected?
Try resetting the SMC and PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM
Call Apple. You get 90 days or free telephone support
Complimentary Support (USA)

Handoff from Mac to iPhone doesn't work

Although I can get handoff to work pretty reliably for some applications, and although handoff works well enough from my iPhone to the Mac, I cannot get any application to handoff to iOS 8.1 on my iPhone 6 from my Mac.
Here is a test of Maps (but it is the same for all applications):
What works:     Maps on the iPhone 6 can handoff to iPad and Mac
                         Maps on iPad Air can handoff to iPhone and Mac
                         Maps on Mac can handoff to iPad Air
Doesn't work:     Maps on Mac cannot handoff to iPhone 6
Any ideas why I am having this problem?
Handoff is set to ON for all functions in settings on the iPhone.
I have tried resetting the phone - no deal. Both iOS devices are running 8.1
Stephen

Here is what I did to solve the problem. It's quite simple but as I said before, it's the thing I hate the most.
- First, sign out of iCloud in every single device, selecting the Delete option every time you are asked;
- Second, turn off all devices.
With all devices out of iCloud and turned off, start going the opposite way, one by one. For example:
- Turn MacBook back on and sign in to iCloud;
- Turn iPhone back on and sign in to iCloud;
- Turn iPad back on and sign in to iCloud;
- Turn Mac Mini back on and sign in to iCloud.

Problem in finding and downloading Map Loader

Hello, i am using N97 mini, i updated the map to OVI free navigation map,
but i want to use the navigation without internet conncetion and for that i need to download the map and save it into my device.
But the problem is i cant find the correct link for Map Loader, please suggest and advice,
Please check the url befor suggesting it to me because i tried many URLs non are working for downloading MAP LOADER!
i have downloaded OVI Store & PC Suite software, but cant find the MAP LOADER software...
Thanks and regards,,,
Talal Baig
Solved!
Go to Solution.

If you have Ovi Suite, you dont need map loader. You can even install PC Suite. Its unadvisable to have them both on the PC
Connect your device to your PC and Ovi Suite. Right click on the bottom where it says connect new device. Follow the prompts. Then select View>Go to>Maps. Select the maps and voice you want to download.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Mac Map Loader ceased to work

Similar Messages

Maybe you are looking for