Mac min G4 HDMI

Hi
I try to connect my mac mini 1.5/G4 (early 2005) with one HP w2207h on HDMI
purchased a dvi to hdmi connector and connect the mac in LCD, work about one two minute and after that stop anything in display only black and one message ''going to sleep''
try with another monitor and another cable but nothing to do this
os x 10.5.8
i use no name connector and clicktronic high speed HDMI cable with ethernet
thanks

The monitor may not be able to detect the signal from the Mac. I would turn off its sleep settings while using it on the Mac.

Similar Messages

Problem with sound in rented itunes series on mac mini (2010) hdmi

Hello,
I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. All my 5.1 speakers play sound.
The big problem is with iTunes. When I want to watch rented series from iTunes Store, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
What is the problem? What is wrong with iTunes?
Thanks in advance

I am having the same issue.
I have a Panasonic TH-50PX60U, and a Yamaha RX-V2065. The Mini is plugged into the Yamaha via HDMI and Yamaha to TV via HDMI.
Problem: Just to clarify I do NOT have a video problem. That part seems to be working fine, my problem is with audio. When ever I switch inputs on the receiver or turn the system off (not the Mini, that always stays on) the audio defaults back to the internal speaker in the Mini. I have to go into system settings and change it back to the HDMI audio out. This is super frustrating. I'm sorry if I posted this in the wrong area, but it's the only thread that looked like it might have an answer. Thanks!

Can I connect my PS3 to my mac mini via HDMI ?

Hello, I would like to know if I can connect my PS3 to my mac mini via HDMI ?
I don't have a TV anymore so I really need to know if I can use my mac mini as one.

Maybe this:
http://eshop.macsales.com/item/Elgato/10025010/
But you need OSX 10.7 or later
and if you have Thrunderbolt connection on your Mini then this maybe:
http://eshop.macsales.com/item/Blackmagic%20Design/BINTSTBEXT/
You YOu my be able to Google and find another videi-in adopter for your Mini

Can you stream video and use the computer at the same time on a mac mini with hdmi

Can you steam video and use the computer at the same time? I have a mac mini with hdmi.

Shouldn't be a problem, unless you want to view it in Full Screen Mode at the same time with only one display.

Does Mac Mini's HDMI-to-DVI cable support analog DVI monitors?

The Apple website shows that the new (late 2012) Mac Mini comes with an HDMI-to-DVI adapter cable in the box :-)
The DVI video connector standard supports both analog and digital video signal modes, but not all models support both modes.
I have an old PC monitor with a DVI connector, which is probably analog only. Will this work with the new (late 2012) Mac Mini?
In other words: does Apple's HDMI-to-DVI adapter cable support all DVI monitors, or only those with a digital input?
Many thanks!
- Martin

Your right about the DVI standard support both analogue and digital. The three types are
DVI-A (analogue only)
DVI-D (digital only)
DVI-I (supports both)
In this case the HDMI to DVI adaptor will only support digital DVI. This is because the HDMI port only supports digital.
Generally monitors with a DVI port support digital DVI, if you compare the socket and pins layout on the monitor to the one on the Mac adaptor if they are the same layout then that should indicate the monitor indeed supports digital DVI.
Note: The maximum resolution supported by the Macs HDMI port is 1920x1200, if your monitor supports a higher resolution then you should get a Mini Displayport to DVI adaptor or if needed a Mini Displayport to Dual Link DVI adaptor (for the highest resolutions).
The following may help http://en.wikipedia.org/wiki/Digital_Visual_Interface

Mac Mini + DVI- HDMI + Toshiba 42RV530U = black screen

Hi all, I have a new Intel Mac Mini 2GHz and a Toshiba 42RV530U REGZA HDTV that I'm trying to connect, with only a black screen so far.
I believe the DVI output on the Mini is working - I can at least get a picture with a DVI-S-Video cable, but it's obviously lower resolution. The DVI-HDMI cable works - I tried it on our cable box.
When the DVI-HDMI cable is hooked up to the HDMI-1 input on the TV, the "No Signal" warning vanishes, but it's replaced by a black screen. No amount of fiddling with SwitchResX has worked so far.
I've tried coming up with values for SwitchResX based on these numbers from the manual (don't know why the H Freq and V Freq give 2 values for each). I couldn't get exact values, but pretty close. I'd ideally like to get 1080p working.
Name Resolution Vert Freq Horizontal Freq Pixel Clock
480i 720 × 480i 59.940/60Hz 15.734/15.750kHz 27.000/27.027MHz
480p 720 × 480p 59.940/60Hz 31.469/31.500kHz 27.000/27.027MHz
720p 1280 × 720p 59.940/60Hz 44.955/45.000kHz 74.176/74.250MHz
1080i 1920 × 1080i 59.940/60Hz 33.716/33.750kHz 74.176/74.250MHz
1080p 1920 × 1080p 23.976/24Hz 26.973/27.000kHz 74.176/74.250MHz
1080p 1920 × 1080p 59.940/60Hz 67.433/67.500kHz 148.352/148.500MHz
I've also tried repairing permissions, rebooting many times, deleting the windowserver.plist files, zapping the PRAM, etc. SwitchResX identifies the TV as "TSB-TV", which sounds the same as other posts with different Toshiba TVs. I'm able to remote into the Mini via Remote Desktop Connection to play with settings, etc.
Any suggestions? Would a DVI to Component cable work? The TV does have an analog RGB in, but this won't support high def. Thanks for any help!
-Frank

An unforeseen twist... I tried hooking up the Mac Mini to a DVI computer monitor, also with no picture. When I hook up my Powerbook to the Toshiba via the DVI->HDMI cable.... Picture! So, looks like my new (refurbed) Mac Mini has a bad digital video output. Seems a little strange though, since the analog video output on it is working fine.
Off to the Mac store tomorrow.

Mid-2007 Mac mini and HDMI issues

I have a Mid-2007 Mac Mini with OS X 10.7.3, that, most of the time, will work fine with a DVI->HDMI cable and either of 2 HDMI ports on the TV. The Mini recognizes the display correctly (a Vizio E371VL). The display's native res. is 1080p at 60hz, and the Mini is set to that and looks great. I can switch to lower resolutions and even restart the mini and have the Vizio look and behave correctly.
However, I have an Apple TV (current generation - black brick) hooked up to the other HDMI port on the Vizio. It also looks and acts great.
The problem is when I switch between the inputs on the TV. If I go to the Apple TV (which will be working fine) and then back to the other HDMI input, the Mac mini shows black. The TV does not say "no signal" or indicate any problem. No amount of zapping PRAM, ressetting the SMC or basic restarting helps. In fact, the TV still registers a signal at 1080p. Using Apple Remote Desktop from another Mac (a 2006 Macbook Pro with DVI) shows the Mini is still functioning and still correctly displays the Vizio model and 1080p @ 60hz resolution.
The kicker here is that I can physically disconnect the DVI/HDMI cable from the Mac mini and connect it to the Macbook Pro. The video from the Macbook will pop up immediately. I can switch between the Macbook and Apple TV all day long, switch resolutions, etc. No problem.
Even more bizarre is that this has the effect of "resetting" the Mac mini. If I plug the DVI connector back into the Mini, its video will pop back up. It will work fine as above until the HDMI input is changed again.
Vizio tech support acted as if they'd never heard of Apple, Inc. Useless.
Super frustrating problem.

Opperman,
I went with my gut and got an LG 47LM4600 TV with VGA input in addition to HDMI (seems there are not many--if any--TVs sold with DVI inputs anymore). The 2007 Mac mini is plugged in using my old DVI cable with VGA adaptor. I tested it using the DVI cable with HDMI adaptor, and there was no sound.
I can confirm the same condition that you originally described when I try to switch to the Mac mini on the PC input. The screen is black except for a color bar that flashes on briefly every 2-3 seconds at the bottom of the screen. No amount of switching from one input to the other will make the display come back. The only way I've found to fix it is to unplug the cable from either the TV or the computer and plug it back in.
The annoyance with this is ameliorated by the fact that we'll be using a new Apple TV to watch Netflix from now on, instead of using a Web browser on the mini. Will only have to worry about it when watching DVDs.
Cheers.
Message was edited by: Numenorean

Mac Mini 2011 HDMI audio in Windows 7 64 bit

Hello all,
I thought I would share lessons learned from my Boot Camp install on a Mac Mini.
My config: 2011 Mac Mini 2.3, Intel 3000HD video
. . upgrade to 8GB ram
Samsung 8000 series LED TV connected with HDMI
Memorex external BluRay writer(USB only power)
For Windows 7 install, I tried installing with the 64 bit DVD but this failed as documented elsewhere.
Instead, setup with USB drive, follow instructions available in bootcamp
After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
When auto updates are off, the Intel video driver that is correct gets installed last. HDMI audio works with this driver.
Apple should install the Intel video driver first and it would solve this problem.
I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!

UPDATE:
I just discovered a good clue on my problem.
I always use my A/V Receiver to connect HDMI devices.
I tried connecting directly my Samsung TV to the Macbook and Intel (HD) Graphics Audio recognized the TV and a new "Playback Device" appeared in the Windows menu.
So the currently problem is that (just in Windows 7, since in OS X HDMI audio is working with DENON A/V Receiver):
Intel HD 3000 graphics is not detecting <Denon A/V Receiver> as an "HDMI audio-capable device"
My denon A/V receiver ( DENON AVR-1712 ) is sucessfull detected by my netbook with Intel G45 Express Graphics, but not working if i use Intel HD 3000 graphics on my MBA.

2010 Mac Mini and HDMI question

Just bought a new Mac mini and have it hooked up to a Samsung px2370 HDMI to HDMI and as good as the picture looks I'm thinking it could look better ... And I've heard that generally a computer shouldn't be hooked up that way... The Mac mini has another mdp and the Samsung has dvi also, what are my options? All these adaptive have me stumped... Plus like I've heard On another thread the mini is thinking I have a television hooked up... Plus when the monitor was on 16/9 the menu bar was not visible and I changed it to screenfit on the monitor which worked but should I of kept it on 16/9 and adjusted it with underscan? Plz help

It works ok for me, I've got a 2010 mini (base model) and am using it as a server for web, iTunes and VPN. It handles lion fine, the only quibble is that being always on it heats up during the day a lot, more so than when I had Snow leopard installed. It's not to unacceptable levels though. But as dingy and beezelbubba say, Ram is cheap nowadays and if you've got the spare cash it's always worth it.

Pluged in my mac mini with hdmi to my tv and its stuck on a "format not supported" messege. How can I change that?

I plugged in Mac Mini 2010, to my TV Via HDMI, I changed the resolution on the mac, and its stuck with a messege that reads " format not supported" how can I set it back to 1080p so I can work?

Reset the PRAM
Resetting your Mac's PRAM and NVRAM
Then if that doesn't get your there, startup in Safe Mode.
Mac OS X: Starting up in Safe Mode

Does the new mac mini have Hdmi 1.4?

I'm thinking about buying a Mac mini in combination with a 3D monitor but every where on the Internet they are talking about HDMI 1.4a or something like that... Is it necessary? And does the Mac mini (2012) have it?

Not certain, but it says here that 1.4 does not support 3-D, that 1.4a is needed...
http://forum.xbmc.org/showthread.php?tid=126642

Getting 1080p on Proscan 40" HDTV with 2010 Mac Mini via HDMI

So I have been trying many things to try and get some sort of good resolution on my HDTV (Proscan 40") with the new Mac Mini, HDMI to HDMI. So far, no luck at all. Although the television says that it is full 1080p at when 1080p is selected in display the text is so jagged it is unreadable. I know very little about this type of thing so I am feeling out of my element.
I realize that the issue could be with the scaler on the tv (?) but since the menu is limited I cannot change it. I have downloaded SwitchresX and tried some things but really don't know what I am doing so if anyone has any pointers I would love to be looking at a beautiful 1920x1080 picture....

This is probably due to how your TV is handling the signal. On my Samsung if I label the HDMI port the Mac Mini is connected to as "PC" it handles the image differently to improve the picture quality from a PC. Fonts appear smooth as I would expect when viewing PC content on a monitor. The down side is I lose a lot of the settings that are normally available to different devices like a DVD/Bluray player.
I do not have it set this way and have the same issue as you where fonts are jagged. My reason for doing this is the color is actually better utilizing the connection as a device source than a PC source.
I didn't have a chance to look at the manual for your TV but I would check to see if you have an option like this.

Mac mini poor hdmi support

Why does the mac mini have poor resolution for a new samsung led 60 tv. I have an apple TV connected to another HDMI port and it is perfect

I'm assuming the mini you have (you don't specify) has HDMI out. There are many reports in the Discussions about problems with the HDMI port in the minis.

Dell 2408WFP at mac mini over hdmi

I have an new mac mini server, where I try to connect an Dell 2408WFP to over hdmi.
Besides the problems with shadows around the letters in written text and menus, which I solved by setting the resolution to 1600x1000, I have a big color problem, which I can't solve by any calabrating procedure. Green and blue colors are dominating, and all brown to red colors are reduced or missing. For example the Icon of the addressbook appears not in this standard beige color but in green. As you can imagine, this is the absolute kill for any work on images. Since the Dell monitor is a good standard one, which I never had any problems with before, there must be a problem with hdmi ore even worse with the graphics of the mac mini.
Has anybody similar experiences and found a solution. I bought the hdmi cable expecting to have the best connection possible then, and to have only one cable between the mac mini and the monitor. Are there any limitations in the hdmi-standard concerning resolution and color management? I didn't test any dvi cable yet, since I am still hoping to find a solution for this problem.

I have exactly the same issues as you, ie the lack of clear / sharp text and the colour management problem. Did you get anywhere with this?
I was using this Dell display with Windows 7 and had none of these problems. I calibrated the display using a semi-professional calibration utility (i1Profiler / Eye-one Match) and the results under Windows were great. But with the Mac Mini I find that many colours lack saturation. Yellows are very faint, and reds look more like a brown-orange. I tried replacing the HDMI cable with a DVI cable and the Mac HDMI -> DVI converter but I don't see any improvement.
Interestingly I find that the text looks best at the monitor's native resolution, ie 1920 x 1200 but it's still nowhere as crisp as text is under Windows.
For me the colour management issue is the biggest problem. I do lots of underwater photography and I just wouldn't dare work on any of my photos with the display as it is.
The profile I find works the best is sRGB IEC61966-2.1 but it's way off being natural / correct.
I specifically bought the Dell display as it has variable height and fits neatly in the corner off my office where the height is limited, I don't have room for a 27" thunderbolt display even if I could find the funds (~$1600 in the UK!)
I'm running 10.7.2 (Lion) in case it makes a difference.

Pb screen fuzzy plugged with mac mini and hdmi cable

Hi all, I bought my first mac yesterday and I plugged it it this morning on my tv screen with an hdmi cable. I saw that the screen at the bottom where all the icones are is fuzzy. We set it up at the apple store and it was working well. Could you please help me.
Thanks a lot for your answer

Well, here's to a happy conclusion.
After bugging the local electronics store for two days in a row, I've found a working Full-HD TV.
Lessons learned:
a) Be thankful for stores where you can bring in your own computer and hook it up to the TVs on display.
b) Don't just glance at the manual.
After trying several TVs and not getting any good picture by either connecting by VGA (consistently showed slight ghosting with high-contrast colors) or HDMI (all TVs did cut off Dock and menu bar), neither the salespeople nor I had any idea what else to do.
The next day, it hit me: We had tried all kinds of setup/config selections from the TV's setup menu.
What we did NOT do was to simply try it with the "Zoom/Aspect" button on the remote - partially because that didn't work with the first model I bought.
So, Mac mini back into the suitcase, back to the store, "Ah, you again...", hook up the first TV set, press "Zoom", pick "Truescan", press "OK" -
Problem solved. Pixel-perfect alignment. => TV bought.
Just for those looking for a "known to work" answer: It was the Toshiba, XV 500 series, older model. It's running on "1920x1080 @ 60 Hz (interlace)", but since I'm using it as a monitor, the "interlace-only" doesn't bother me too much. No problem even when watching DVDs via the mini.
Image is stable, text is crisp and readable at 5-6 ft. distance, dimmed-down lamp is more than adequate even at minimum brightness since the room faces north. Low-power setting of the lamp makes for only 70 watts consumption instead of the rated 180+ watts.
Happy user here now

Mac min G4 HDMI

Similar Messages

Maybe you are looking for