Mac Mini 10.4 install disk work with a macbook?

Hello All,
Will my Mac Mini 10.4 install disk work with a Macbook? I believe the model is either a MB061LL/A or MB062LL/A.
Thank You in advance!

Yes, and possibly the system that disc can install is not Intel compatible. It would have to be a late 2006 model, which was the start of the Intel series of Minis.

Similar Messages

TS3897 i downloaded iWork 09 on my mac mini - how do install it on my two MacBooks

i downloaded iWork 09 on my mac mini - how do install it on my two MacBooks?

If you purchased Pages, Numbers or Keynote in the Mac App Store, you can install these applications for free on your other two computers. In them, open the App Store, go to Purchases tab and download them for free. Your MacBooks must be running OS X Lion or Mountain Lion

Will the Apple mini DVI to video adapter work with a macbook? What to Buy?

I went to my local Apple Reseller and asked for a mini dvi to video adapter to use to connect my macbook to a tv using either s-video or the yellow RCA cable. I was told that they only had the one that was for an ibook and Power book and that this would not work with a Macbook. I would need a different one. Is this correct. If so, what do I need? I have looked on the online Apple Store and cannot find anything that fits this description. They only list one type of Mini DVI to tv adapter? I just want to be able to connect my Macbook to a TV.

As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
ted.h.
Mac Mini (Pro Duo) and MacBook (C2D) Mac OS X (10.4.8)

Newer mac mini airport utility can't work with older airport express

Hi anyone who can help me out.
I have a relatively new mac mini (2012), and a much older airport express. I can accesss the internet no problem, but I cannot use the airport utility to chane the password on the airport expres. when I try, I get this message "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." I have the latest version of Airport utility (6.3.1), which is supposed to work with all generaions of airport express. I need to change the password, but I do not have any of the original set-up disks for the airport. How do I fix this?
Thanks for your help.
liametmanu

Unfortunately, AirPort Utility in Lion and Mountain Lion no longer supports the older wireless "b/g" versions of the AirPort Express. This would include model numbers A1084 and A1088.
Please locate the model number on the side of your AirPort Express devices to verify the version that you have.
If you have another Mac running the Leopard or Snow Leopard operating system, you can use AirPort Utilty on that Mac to administer the older Express. A PC could be used as well.
If you cannot use another Mac or PC, then you might want to consider trying an unsupported method to install an older version of AirPort Utility on your Mountain Lion Mac. No guarantees can be offered that this will be successful since Apple does not officially support this method, but it does seem to work for most users.
See this thread for more details:
https://discussions.apple.com/message/22940547#22940547
If nothing seems to work, the final option....likely the one that Apple wants you to use.....would be to buy a new AirPort Express.

Getting error "The disk you inserted was not readable by this computer." on mac mini and imac but it works on old macbook pro

Please help! My hard drives work on all other computers except new imac and macmini.

Both the mac mini and imac do not have cd drives. The trouble is why should I repair the external HDs when they work fine on other computers? I'm running OS X 10.8.4. I feel like its an OS X problem but I cant say. I will try the suggestion but I absolutely cannot reformat these drives right now becuae it would be way too time consuming to recover all the files on them

Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

Does the Apple Snow Leopard install USB work with any macbook air?

Hi guys and girls,
Im changing the hard drive in my MBA 2008 A1237 from the 80GB HDD to the 64GB SSD. Ive seen a Snow Leopard install usb on ebay for £15 so ive brought it.... but I was wondering if it would actuly work with my particular Air?
As my perivouse exspriance tells me that some install DVDs are tied to cirent products such as my iMac install dvd wont work on my Macbook..
Thanks
Firky

The OS X Lion Thumb Drive isn't being sold by Apple, so you need Snow Leopard. Buy Snow Leopard from Apple and use the USB SuperDrive to do it. Then, open Apple menu > Software Update and install the most recent version. If you don't want to spend more money, stay in Snow Leopard, but if you want Lion, call Apple to purchase Lion > http://support.apple.com/kb/HE57

If I buy FCPX for my Mac Mini, can I install it on my Daughter Macbook Air?

FCPX multiple install

Family Sharing may apply, and if that is the case she can legally use FCP X under your license.
One user (you) sets up Family Sharing, and invites other family members. I don't know if it is required that your daughter lives with you or not.
I do know that Family Sharing allows up to six family members and that they can all legally use the purchases by the family organizer (you).

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine

Recently upgraded Mac 24" to Lion (clean install) and now no external hard disks work with Time Machine.
installed new internal disk first with fresh 10.7.3 Lion software. Also upgrade ram to 4GB. Work great, super fast.
BUT.... my WD 1TB firewire400 external disks no longer work with the Lion enabled machine now.
FURTHER... I read somewhere that WD is problematic with Lion but Seagate was not... so I went and bought a new 3TB Seagate GoFlex.
When it didnt work properly either, I patiently searched and found a software/firward upgrade and applied.
I re-partitioned disk to extened/journaled standard, etc.
Then assigned the particition to Time Machine. Drive turned the blue/grey color, so I thought it would work.
But, it has now been in "preparing" mode in Time Machine for HOURS....
What is up Apple? So dissappointed. Ive read these type of problems are notorious with Lion and I wish I never upgraded.
Are you trying to make issues with External disks, to drive people to iCloud? That trick ont work in me. I will not reward bad behaviour Apple.
Please provide a fix... I wasted hours/days screwing around with this, instead of using the Mac for what its intended!

Solved by Pondini, on another thread I opened...
Answer:
Sounds like either:
A directory problem on your internal HD. Verify your internal HD, and Repair any other volumes being backed-up per #A5 in Time Machine - Troubleshooting.
Something in OSX may be damaged. You've tried the "combo," so a fresh copy of OSX (that won't disturb anything else) would be worth a try (and you don't need a tech for that). See Installing the ''combo'' update and/or Reinstalling OSX.

I want to install Snow Leopard Server on our MacPro (2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need to purchase another copy of Snow Leopard Server?

I want to install Snow Leopard Server on our MacPro(2.66) using Mac Mini Snow Leopard Server disks? I kept getting an error for backwards compatibility. Is this possible or do I need topurchase another copy of Snow Leopard Server?

The OS disks that are shipped with a particular product
are set up so that tey will only install on that product.
It will install on any Mini of that exact vintage, but that
is all.
This is to prevent people from doing exactly what you
are trying to do. The license for OSX shipped with any
is only valid for that product. Also, Snow Leopard,
including Server, is only permitted to be run on one
computer at a time. Bottom line, unlike Lion, legally
you cannot install the same copy on multiple
computers unless some "family pack" or site license
is purchased.
Yes, you need to purchase another copy.
The copy of Snow Leopard license is here:
http://images.apple.com/legal/sla/docs/macosx_snowleopard.pdf

2010 Mac mini server remote install OS X failure

I tested re-installing OS X remotely to my 2010 Mac mini server. It worked the first time. I got to the installation process, and abandoned it without actually doing anything.
But when I tried again, it failed, and I have not been able to get it to work ever since. I went to a local Apple shop and tested at its Genius bar. People there cannot figure out the problem. They exchanged my unit for a new one.
I took the new unit home, tried, and it failed again. Then I called Apple Care. They cannot pin-point the problem, but suspected that, since I failed with two units, the problem may be with the computer that has the DVD. I am not sure about his. Here I post my story for help. The details:
1. The OS X Server installation DVD (which came with the mini) was put in a 13" 2009 Macbook Pro. There I ran the Remote Install OS X application. Selected the Installation DVD.
2. Then I started the Mac mini server, holding the down Opt key. The Installation DVD appeared from my local network. However when I selected the DVD and clicked the arrow sign under it, things went wrong. A circle with a line segment appeared briefly (indicating a problem, I think). Then the mini simply went to boot from its own hard drive where the original OS X was.
Help and suggestions are very much appreciated.
Additional information:
Remote Disc works fine. From my Mac mini, after booting into the original OS, I can see and open DVDs in the Macbook Pro.

Target disk mode method works fine. I can boot my mac mini from its installation DVD placed in my macbook pro, connected to the mini through firewire. So I don't think there is any hardware problem.
I played with a few other things. First I used another DVD, this time the one that came with my 2009 macbook pro, a non-server version OS X. When I tried to remote install it to my mini, the mini can still see the DVD but it hung after I chose to boot from it. It just showed a big circle with a line segment. It did not revert to boot the OS on its own hard drive.
Next I again ran remote install on macbook, but booted the mini to its own hard drive. From there
I changed its start up disk to Network Startup, and rebooted. The mini can find nothing on the local network.

Mac mini late 2012 wakes up unexpectedly with password field filling by itself

I just upgraded from OS X Mavericks 10.9.5 to OS X Yosemite 10.10.1 and have difficulty keeping my computer asleep. I always put it to sleep using the drop down menu.
Symptoms are:
1. Power light on Mac mini does not always pulsate from dim to bright when asleep. It is often constantly lit.
2. Mac mini wakes up without user intervention with password field filling itself in as if someone is typing it.
Attached peripherals:
Apple Magic Mouse (Bluetooth wireless)
Apple Keyboard with Numeric Keypad (USB)
Actions I have taken to remedy the situation:
* Turned Magic Mouse off using the power switch
* Turned off Wake for Network Access
* Turned off Sharing, deselecting every option
* Turned off Allow Bluetooth devices to wake this computer
This problem did not occur with OS X Mavericks.
Nothing is resting on the keyboard or mouse that could cause this.
Thank you for any suggestions and solutions. I appreciate any help.
Paul

Hi Loner.
I did the following:
1. Turned off Bluetooth and switched off Magic Mouse
2. Installed Logitech USB mouse
3. Put Mac mini to sleep
I thought that would solve it but it woke up from sleep again with this in the logs:
Dec 11 21:24:00 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 26(powerd) TimedOut InternalPreventDisplaySleep "com.apple.powermanagement.delayDisplayOff" 00:04:59 id:0x100000028d [System: DeclUser IntPrevDisp kDisp]
Dec 11 21:35:26 Pauls-Mac-Mini.local powerd[26] <Notice>: Display is turned off
Dec 11 21:35:26 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 70(hidd) Summary UserIsActive "com.apple.iohideventsystem.queue.tickle" 11:28:25 id:0x90000014d [System: DeclUser kDisp]
Dec 11 21:35:26 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 26(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xd00000751 [System: DeclUser SRPrevSleep kCPU kDisp]
Dec 11 21:35:41 Pauls-Mac-Mini.local powerd[26] <Notice>: PID 26(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xd00000751 [System: DeclUser SRPrevSleep kCPU kDisp]
Dec 11 21:35:41 Pauls-Mac-Mini.local powerd[26] <Notice>: Entering Sleep state due to 'Software Sleep pid=66': Using AC
Dec 11 21:35:44 Pauls-Mac-Mini.local powerd[26] <Notice>:
Dec 11 21:35:44 Pauls-Mac-Mini.local powerd[26] <Notice>:
Dec 11 21:37:32 Pauls-Mac-Mini.local powerd[26] <Notice>:
Dec 11 21:37:32 Pauls-Mac-Mini.local powerd[26] <Notice>: Display is turned on
Dec 11 21:37:34 Pauls-Mac-Mini.local powerd[26] <Notice>: Wake [CDNVA] due to EHC2/HID Activity: Using AC
Dec 11 21:37:34 Pauls-Mac-Mini.local powerd[26] <Notice>:
I'm perplexed but now we know it has nothing to do with the Magic Mouse.
I'm no expert but this worked fine under Mavericks.
Perhaps it is a keyboard driver that's a bit wonky under Yosemite while in sleep mode?
Maybe the OS can't communicate properly with the keyboard while asleep.
I have an idea to rule it out further:
I'll try unplugging the keyboard and use the Logitech USB mouse to put
it to sleep again.
I'll report back with any findings.

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does...

Airplay mirroring on Mac Mini (late 2012) doesn't work, extended display does... What's going wrong here?
Details: OS X Yosemite 10.10
Apple TV 3rd generation, version 7.0
Switching Airplay on on Mac Mini works. It goes automatically on extended display mode. Switching to mirroring works for about 1 sec and then it switches back to extended display mode. On my tv screen i see my second desktop. Funny detail: it has the desktop background i used previously. Another funny detail: I had exactly the same problem when i used the previous versions of OS X and the Apple TV software...
Who can help, please!

I also have been having problems with Airplay on my 2014 Mac Mini see Mac Mini 2014 Airplay Display Disconnect Bug?
I"ve also noticed that my Apple TV (3rd Gen) does not appear in the iTunes Airplay list on my Mac Mini whereas it does on my MacBook.
I've booked a call with Apple Support for next Sunday to discuss the issue.
If I get any useful info I will pass it on.

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?

Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

Mac Mini 10.4 install disk work with a macbook?

Similar Messages

Maybe you are looking for