Mac Mini (10.5.8) won't stop cycling through "Nature" desktop backgrounds.

My Mac mini is changing its desktop background by itself about every 30 seconds, strictly from the "Nature" folder of backgrounds. Tried switching to a different folder with a different desktop, but it will revert back to the nature folder after holding it for about a minute. I don't have it set to change the image. Using an LG monitor.

This is just the settings for Desktop & Screen Saver, let me know if you need screenshots of any other settings.

Similar Messages

Mac Mini OS X Corruption - won't boot up!

Mac Mini OS X Corruption - won't boot up! Its Power Off Automatically after showing Mac Logo in start up. But I can able to detect the Harddisk and CD/DVD using Options.

Thanks, woodmeister50, that looks almost simple enough ... BTW - the Mac Mini didn't come with a DVD. No DVD at all, and no CD/DVD-ROM drive. I am guessing: nothing really says this out in the open that I have seen, so I have to guess that the "Recovery HD" is a set of files on the same Mac mini HDD with the OS X. Is the Recovery HD a partition on the Macintosh HD, separate ffrom the System partition (OSX)?
I think Recovery Disk Assistant must be an app, but I don't see it in my top-level Applications folder, in Finder (nor anywhere else). And I don't see it in system Utilities, either, in the Launchpad. (That Launchpad display really is beautiful!). And RDA isn't shown in the Mission Control panel, or the Desktop.
Any ideas where I might find Recovery Disk Assistant.app file? Is it found on the Recovery HD (along with the OS X setup files)? And, is it accessed by booting into the OS X Utilities with Command+R?
Message was edited by: RxDdude 6:05 a.m. CST Friday, 13 JAN 2012

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

My iPhone 5 won't stop scrolling through songs and I can't stop it please help !! :(

settings - general - usuage - music - delete. Then do a reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
Then sync the music back via iTunes.

HT4997 I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

I am trying to export a 6.5 minute video from imovie to my camera roll on my iPad Mini. However the progress bar stops halfway through. Any advice would be very much appreciated, many thanks.

Mac Mini, OSX Leopard Server: Won't Boot

I have a Mac Mini Server that 's been stable and connected to my home network wirelessly.
But the signal strength has been so-so.
So I added an Airport Express Modem in my system and installed the adminstrative CD that came with it.
The Mini saw everything and set up the Airport Express fine and it worked great...for about 3 minutes.
I was checking the speed when it became non-responsive. I shut it down and tried rebooting, and the loading ball spun and spun and spun and did nothing.
I tried rebootijng from a regular OSX Disk and it was non-responsive.
I got it into diagfnostic mode, got a diagnostic screen showing me everything was working, but it still only shows a spinning ball forever and won;t boot.
Using an external DVD, tried using the administrative disk, but I also couldn;t get into it.
No matter what I've tried, the "loading ball" spins and spins and spins...and won't actually load anything.
Ideas, suggestions? I HATE to hit the genius's this time of year..IT'll take FOREVER!!!

Smells of a low-level hardware failure.
I'd usually suggest ordering a spare Mac Mini Server, and rolling in your backup, but Leopard is a very long time ago and jumping to Lion is going to be involved. Which leaves you to scrounge something old enough to run Leopard or Snow Leopard, and moving to that.
Or you get to brave the local Apple store, yes.
If you don't have good backups of your disk, stop working with the server Right Now, as - if this is a disk-level error - further activity on a failing device tends to reduce the likelihood of eventually recovering the data.

My new Mac mini (refurbished by Apple) won't play nice...

I just bought an Apple-refurbished Mac mini and when I turn it on, it goes right into Open Firmware (Unix??). Also, when I type mac-boot at this prompt I get the "?" folder. To top that off, the CD/DVD Combo drive won't accept a CD or DVD, it springs out slightly and the mechanism doesn't pull the disk in. Is there something I'm doing wrong? I've already taken this to the Apple Store in Chicago for repairs after working with AppleCare Support. After getting it home, it's having the exact same problems I originally took it in for.
My wife has worked with a Mac Server before and asked if there's a locking mechanism on the unit anywhere. Well I can't find it...
Any help would be GREATLY appreciated. BE
Mac mini Mac OS X (10.4.2)

There's no locking mechanism, and judging by the fact the mini won't start up normally and won't let you insert the install disk to try and set it up from scratch, it sounds to me like it is fairly fundamentally faulty.
Did the people at the Apple store give any indication of what they did with the unit when you took it in? It's odd that it's in the same condition now as it was before you took it there, and suggests they may not have checked it over at all, or that the fault the unit has is perhaps intermittent and can be induced (or corrected) by the sort of movement and vibration inherent in transporting it.
One way or another, I would not accept that unit as functional, and would suggest you call Apple and in view of the fact it did not work at the outset, ask for it to be replaced.

Mac mini g4 power pc won't download please help I'm new mac

I have used Mac mini g4 2005 run Mac os x 10.3.7 but I can't Download. I don't know why is my forts Mac and I think sale because I don't know how download and also won't open YouTube too please help thanks how configure please thanks

Thanks for the suggestions.
I did try the DIMMs one at a time, plus in pairs, and no luck.
But I think you were on to something about trying a different CD. I don't have the System CD for this machine, nor do I have a System 9 CD. I had tried an OS X 10.3 installation CD and a Disk Warrior CD, but those wouldn't work. I did find an Apple Extended Care CD (which had a version of TechTools on it) that I got with my Powerbook, and lo and behold, the G4 started up off of that! So I turned off the machine, connected the hard drive again and restarted. It booted up off the hard drive and I was able to connect to the network and everything.
But then I got greedy. I thought whatever was wrong was now magically fixed (magic being my most relied upon Apple repair tool) and popped all the RAM back in. Turned it on, kernel panic. Darn. Took the RAM back out, turned it on, kernel panic. Uh-oh. So I put the RAM back in and tried to start it off the Extended Care CD again. It started up OK from the CD. Then I tried to boot from the hard disk again, and it booted up just fine, no problems at all. I had to reset the clock, but everything works.
So I still don't know what's going on with the machine. Maybe it was the battery after all, but it couldn't boot until something was reset. It's a mystery, I guess.

My mac mini sudenly frozed and won't boot in again.

while i surf the net with safari, safari just close itself and the screen was dim with a message to restart . after i do restart my mac mini it can't log in to os and fail to install new os from cd. i did test hardware and it error 4MEM/1/40000000 . is it because my kingston ram that i just replace 1 month ago? i think it just works....

I am having a similar issue to the original post! However, I have not upgraded my RAM. I've only had my Mac Mini for 2 months. I have the dual 512MB RAM sticks which came with the Mac Mini from Apple. The case has never been opened.
My system won't boot into the Mac OS GUI. I just get dumped to the Darwin prompts. I can't successfully re-install the OS from DVD/CD. I run the Apple Hardware Tests from disk and get "4MEM/1/40000000".
I noticed this when I tried to login to my machine on 6May07.
Does anyone know if the brick and mortar Apple Stores can replace the memory under warranty on the spot? (The closest Apple Store to me is about a 3 hour drive). I hate calling the Apple hotline.
-Mr.g@dgeTT

My mac mini's hard drive won't go to sleep!

I don't know what happened? a couple of days before my wireless track pad and keyboard would have trouble connecting when computer is waken after sleep mode. Then one day my mac mini just suddenly stopped going in a physical sleep state. When I go to the apple sign and put the mac mini to sleep the screen turns black like usual but once its put to "sleep" the light indicator on the mac mini will not blink neither will I hear the hardrive slow down. whats going on. This is the standard $700 model mac mini mid 2011. I pretty sure its a software problem rather than a hardware problem. I have made no customozations to the mac.

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

Mac Mini with Striped RAID won't boot

Hello all,
I have a Mac Mini Server which I've installed Lion (not server!) on. I set it up with a striped RAID (two internal 500GB HDDs) and it worked great for weeks until I shut it down for the first time. Now it won't boot back up... I just get the Apple logo and the spinning wheel. When I boot off a rescue drive, I don't see any errors related to the RAID. It just says it's "Online." None of the buttons for things like Verify and Repair seem to do anything when I click them.
When I hold down option upon turning the power on, I see "RAID 1" and "RAID 2." I don't know where those names came from, they aren't anything I set during the Lion install and RAID setup. I've tried selecting both, and all I see is the Apple logo and spinning wheel.
I'm hoping some of you have ideas! I also tried holding down the power button until the Mini rebooted itself, but that has not helped.

Hi, I think you'll have to Install Lion again to an external drive, or even a big enough Flash Drive to get any further.

Mac Mini w/WinXP sp2 won't find AirPort Extreme

I bought my wife a Mac Mini. It sees the Airport Extreme that we have when booted into MAC OS. This was setup for her iBook. Works fine, has been for a couple years now. If she boots into WinXP side she cannot access the internet. Windows doesn't detect the wireless modem or the Airport Extreme at all. When I run the Airport Setup Assistant I get this error message: "This computer has no wireless interface enabled or Windows is not setup to manage wireless networks on this computer."
I have no clue what to do from here. Any help would be greatly appreciated.
Thanks
dshel61
mac mini Windows XP SP2

I have and I just reinstalled them. When I go to Device Manager it shows all yellow exclamation points under "Other Devices".
All of these devices are listed:
Ethernet Controller
Ethernet Controller
PCI Device
PCI Device
Unknown Device
Video Controller (VGA Compatable)
Any thoughts?

Mac Mini Mid 2010 windows won't boot

After using boot camp to install and run Windows 7 on a Mac Mini Mid 2010, I restarted the machine to boot OSX. Now I can't boot back to Windows. Boot Camp seems to be working fine, but the partition I created doesn't appear to be bootable. I don't know what to do or how to solve the issue. How can I solve this issue?

I will venture that you were unlucky. Twice could be a coincidence. However, if it were to occur again, then you have a pattern and I would imagine that Apple would think something in your home/office is causing the issue and be less likely to want to swap for another.
Dah•veed

Mac Mini (mid 2010) failed - won't pass POST

Three weeks ago my new Mac Mini (mid 2010 model) was delivered. It lasted 8 hours before dying. The replacement lasted longer, working beautifully for eight days before apparently failing in the same manner: powered on, in sleep mode, left alone. Dies. Doesn't respond to SMC or PMU resets. It's been a box-for-box swap for its predecessor on my desk, a late-2006 Mac Mini.
I presume that two failures in this way is pretty unusual - is there anything in my set-up that could be causing this or am I just very unlucky? (The machine itself is going to see a Genius next week)

I will venture that you were unlucky. Twice could be a coincidence. However, if it were to occur again, then you have a pattern and I would imagine that Apple would think something in your home/office is causing the issue and be less likely to want to swap for another.
Dah•veed

Mac Mini Server (Late 2009) - Won't boot from Windows USB/DVD

Hello all,
I have a Late 2009 Mac Mini Server (Macmini 3,1) with OS X Lion.
I have created a Bootcamp Windows Partition on one the 500GB Disk using Bootcamp 4.0.
After the partition is created, I have tried installing Windows 7 using the Bootable USB method as well as using the CD Drive from the attached SuperDrive.
But all I encounter is either the blinking cursor or after the "Starting Windows" logo, a BSOD.
Any tips/help on how to proceed?
Thanks in advance.

Cattus,
Thanks for the reply.
I did use BC to create the USB stick. I also tried to create the USB on a WIndows Machine (just in case). But still can't boot from USB. What's the WIndows Utility you mentioned?
Also, according to the this LINK, The firmware for Macmini 3,1 should be MM31.0081.B06 (EFI 1.2).
However, the BOOT ROM info on my mac mini says MM31.00AD.B00 and I can't seem to update the EFI Firmware. I get a message "This computer does not need this update" when I try to run the MacminiEFIupdate.pkg

New mac mini 2011 windows 7 won't connect wireless in bootcamp

When I boot into win 7 everything is fine apart from I have no wireless connection looked everywhere in setting but cannot find any way of doing it,wireless works fine in lion,I currently connect mac mini by wireless,Ethernet is not possible at this time as to far way,any body point me in right direction.
Also another prob I have is since installing bootcamp whenever I boot the mac it always boots in windows 7 how do I make it boot into lion first thanks.

Boot Camp - Installation & Setup Guide (OS X Lion)
Frequently asked questions about Lion and Boot Camp 4.0
The BootCamp Drivers have to be downloaded from inside the BootCamp Assistant (called "Windows Support Software").
Reboot into OSX and then go to System Preferences then Startup Volume and set your OSX to be the default.
For the Windows Installation this was altered.
Stefan

Mac Mini (10.5.8) won't stop cycling through "Nature" desktop backgrounds.

Similar Messages

Maybe you are looking for