Mac Mini 2.53 C2 Duo will not take any disc

Hi all here is my problem… I have a Mac Mini C2 Duo 2.53 that will not take any disc DVD or CD when it is turned on. If I turn it of and put a DVD or CD in the slot it will load on boot and play and read. If I eject the disc and load a new disc with in 5 seconds it will load a new disc if I wait longer than 5 seconds I can't load any form of disc I have to turn off the Mac.
I have Installed 2 different BD drives and 2 different DVD drives all with the same result. Any ideas would be greatly appreciated.
Cheers Patrick

I have installed now 6 different drives all new… all do the same thing I could cry have reset the SMC a few times no luck. The drives work fine in a different Mac Mini just not in this one. Is weird that they all work when the Mini is booting but not afterwards. I don't want an external drive as this defeats me buying an older Mini with internal drive.

Similar Messages

I friend has given me his original copy of Photoshop Elements 11. It will not load on to my computer. Mac. mini. I keep getting will not initialize.

I friend has given me his original copy of Photoshop Elements 11. It will not load on to my computer. Mac. mini. I keep getting will not initialize.

I own the businesses, so there are no restrictions. Even my personal page has the same problem. I've been working on FB for years with no access problems. Ironically, the problem started the day the FB IPO went public. At first, the "freeze" happened when I tried to view a photo. Now it happens virtually every time I try to do anything: view a friend's page, try to use "chat."
I'm at a loss. I would view it as a blessing, except that too many of my "friends" and family only use FB to communicate. I'm afraid that's how the world is today, and we can't turn back the clock.

My Mac mini with 10.6.8 will not stay asleep.

My Mac mini with 10.6.8 will not stay asleep when I click sleep or use the key command. It wakes up immediately. But when I leave it go to sleep on it's own (Energy Saver) it stays asleep. I've set it at approx. 8min. Is their any fix so it will stay asleep from the comand?
Thanks for the suggestion. Didn't figure out what the probelm was, butin disconnecting every thiing and putting it bck it,s working now.

Just a suggestion: In System Preferences, in Energy Saver, under the Power Adapter tab, if "wake for network access" is checked try unchecking it. Probably isn't what the problem is, but worth a try.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

When starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names

when starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names, I had just entered my info and clicked on "continue", the cube began to turn and froze, a translucent screen came over the whole window and request that I restart the computer, after doing so, I got the start up sound and a message saying that OS X was starting up and then the sign in window, but when I entered my info it kept shaking/rejecting it, only thing I can think is that could I have possibly entered my password wrong twice, don't know, I'm still scratching my head.

Do it again, I'm afraid. Be sure you set up the initial admin account with a proper password you can remember - all lowercase letters and numbers. No special characters or spaces except for the "_" underline character.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

HT1476 iPhone 4th Generation will not take ANY charge

My iPhone 4 will not take any charge. Why?

depend on if you connect it by usb or ac
if by usb then itunes need to be installed on the computer
if by ac then the connector in the cable or iphone maybe damaged
test with another cable

Mac Mini Server Hd disappeared. Will not boot anymore!

I have a Mac Mini Server about 3 years old running Leopard. I noticed that my server HD had disappeared and was not even showing in disk utilities. The 2nd HD which I had setup for backup was still there and presumably bootable. I checked with disk utlty and disk was not there. Finder was not showing it either So I rebooted hoping it would come back, but I got a message like this:
panic (cpu 0 caller 0x47f5ad): "Process 1 exec of /sbin/launchd failed, errno 85\n"@/SourceCache/xnu/xnu-1504.15.3/bsd/kern/kern_exex.c:3145
Debugger called: <panic>
(Then a backtrace)
BSD Proces name corresponding to current thread: init
Mac OS Version:
Not yet set
Kernel version:
Darwin Kernel Version 10.8.0: Tue Jun 7 16:33:36 PDT 2011; root:xnu-1504.15.3-1/RELEASE_I386
System model 6,1 (Mac-F2268EC8)
Now I cant boot into my system at all. This mac mini has no DVD. I do have other macs I can use and have all the original DVDs.
Any steps I can use to fix or recover from this error?
Thank you

Which Tiger Install DVD do you have...?
1. I think that, that model originally came with 10.4.10 and so you will need either the original 10.4.10 install disc or a later retail (Leopard or Snow Leopard) upgrade DVD.
2. In addition, a new (HDD, Hybrid Drive or SSD) must first be Partitioned GUID Partition Table and Formatted Mac OS Extended (Journaled) before OS X can be installed.

Mac mini slowed down and now will not start up

Help!
I couple days ago i noticed my mac was running a bit slower than usual but I just ignored it since I brought it home for the holidays and thought it might just be the internet connection. Then, yesterday, I turned it on in the morning and it was running so slow that it would take up to 10 minutes just to open any window. TODAY, i turned it on again to try to solve the problem after being unsuccessful yesterday, and now the fan starts blowing really loud as soon as i turn it on as if it were hot (i don't know, im not very smart with computers) and it will not load past the first grey screen or the second blue one.
Any ideas on how to solve this problem? Also, if it matters, i'm not sure what my 'OS' is and since i can't turn my mac on i can't find out what it is at the moment...
Thanks for any suggestions!

Thanks for the info about having wrongly applied the PMU reset to your Intel Mini. That will account for the fan running full blast. Only known (cheap) fix is to apply the correct SMC reset.
http://support.apple.com/kb/HT3964?viewlocale=en_US
(The Mini's reset procedure is at the very end of that link.)
If that fixes the fan, then we have to consider that your original problem had something to do with the hard drive. Either the hard drive was too full, or else it was starting to fail and needed to re-read sectors -- which would account for things getting very slow.
Do you have any recollection of how full the drive was? Any warning messages?
To check for HardDrive failure or file system corruption, typically one would startup the Mini from the install disc that shipped with it and run DiskUtility from the Utilities menu at the top of the screen. But it seems you can't get your hands on that disc -- and you pretty much need the kind of disc that shipped with your model of Mini.

1.42 Mac Mini with External Boot (HFS) will not Load Leopard

The Mac Mini will restart to start the loading from the DVD. The drive will spin up and will act like it is going to work then I get the wonderful "grey screen of death" telling me to power up the mac again. I have tried shutting down all other external drives but the one I need to install on. Even though I know the dive in the mini is bad I tried to run with only it and boot from the DVD and that didnt work either. Any help is greatly appreciated. I am not touching the MacBook till I see that this will work. Very dissappointed so far. Have never had an issue with upgrades from Apple before.
I have check my software update.. completely up to date. I have scoured the downloads for any firmware updates and the few I have found say I am not eligible for that update.

I disconnexted all drives and externals. Then tried again. That seemed to help. Have new issues which I am getting ready to post.

Mac Mini spins wheel on screen will not boot

This is a very frustrating problem. My new Mac Mini will not boot. I removed all external drive cables, ethernet, only display and kbd. Still not luck. Followed istructions in the booklet.
The little wheel under the Apple logo jsut keeps spinning around and around, with no change.
No Luck. Help!
Thank you

Track Down your install disk, and put it in, and then hold down the Alt key. Once the boot menu popups up select your CD. Then select your language and hit next. Afterwards go into utilites and then disk utilties; then select your Hard Drive (the top not the bottom) and hit repair disk and repair disk premissions. Then reboot.

Mac Mini OS 10.5.8 will not install .pkg or .mpkg files

Reciently my Mac Mini has been prompting me to "choose an application" when I try to install .pkg or .mpkg files. This is preventing me from installing any new software on my computer. I've tried to repair permissions and that didn't help. I also tried to reinstall my OS from the disk that came with my computer. When I attempt to reinstall, my mac restarts and spits the disk out and no changes are apparent. What can I do to fix this?

Welcome to the Apple Discussions!
Those packages are opened with the Installer.app. Perhaps it has become disassociated from these types of files on your Mac. To install, next time it asks you to choose an app, browse to the Installer and choose it. It is in Apps/Utilities.
To permanently fix this issue, right click on a pkg or a mpkg file and select Get Info. In the Get Info window go to the Open with pane and choose the Installer as the correct app to open these files. Then press the Change All... button.
Dah•veed

WRE54G will not take any firmware update

My AP does not show any version # on the AP its self but when you go in to the setup it shows Firm ware ver 1.04 May of 2004. I hve never got either of the 2 AP's to connect up to my router and yes it is the correct router.
Nebhor wanted to used them on his network correct router also no good. Talked to Tech for 3.5 hrs trying to get them to work but no luck. I have had these for 1.6 years, tech support said to up date the FW but when I try any of the ver 1-3 it say's wrog firm ware ver 2 & 3 are the same file.
Any thoughs?

Try upgrading firmware using TFTP applications…go to ftp://ftp.linksys.com/pub/network/ and save tftp.exe file on computer and try upgrading firmware on WRE54G…check whether it works or not and let me know…

My Mac mini locks up intermittently or will not wake from sleep what should I look for

Has this anything to do with flash

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time after you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post any other kind of report—it will be very long and not helpful.

I have bought a 'brand new' iphone 4 from e-bay. The seller said it was on o2, but it will not take an o2 sim? Tried all of the major networks and it will not take any of them. Seller is very unhelpful and I don't know how to find the original carrier. C

Hi
I have bought an Iphone 4 from ebay. It was listed as brand new and on o2. The phone has never been activated but it won't take an o2 sim, in fact I've tried the majority of the UK networks and it just keeps saying sim not supported please insert the original sim. The seller is very unhelpful and I'm a bit lost now. Can anyone help? I'm an iphone novice, am I doing something wrong?

The only option here is to contract 02 and ask them why the phone won't work. If the phone is supposedly locked to 02, then they are the only ones who can help you. Try contacting them to see.
If they can't help you, then I'm afraid that you have been had on ebay and it is never a good idea to purchase iPhones and anything of an expensive nature there - you can never trust what people say.
You need to contact the seller and either ask for the original sim card for the phone and if the phone is actually locked to 02 or you just tell them that you are returning the phone for a full refund.
If the seller is not being helpful, then you can file a dispute with ebay and ebay will then sort it out for you and you should be able to return the phone for a full refund.
Bottom line: Don't buy an iPhone from ebay and if you want an iPhone on 02, go to an 02 store and buy one - they have plenty in stock - my local branch has iPhone 5's in stock and they still have the iPhone 4's if you want one.

My disc drive will not accept any discs, it immediately pushes them out, but there's nothing blocking it. How do I fix it?

I have a macbook pro that's about two years old and having the functioning disc drive I paid for would be awesome. The drive rejects any disc I try to put in, is there a way to fix it? Or would it be smarter/cheaper to just buy an external drive?

Hello, lwag014.
Thank you for visiting Apple Support Communities.
Here are the best steps to go through when experiencing issues with your SuperDrive.
Apple Computers: Troubleshooting the slot-loading SuperDrive
http://support.apple.com/kb/HT2801
Cheers,
Jason H.

Mac Mini 2.53 C2 Duo will not take any disc

Similar Messages

Maybe you are looking for