Mac mini 2007 lion sound

since update to lion I have no sound anymore.
any solution please?

Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article.
2. If your model has an audio-out (headphone) port, and a red light is coming from it, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
3. Boot in safe mode. Don't log in; just reboot as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
4. Reset the NVRAM.
5. Reset the SMC.
6. Reinstall OS X after backing up all data.
7. Make a "Genius" appointment at an Apple Store.

Similar Messages

  • Mac mini 2007 Intel Core Dou Intall problem

    I have an Apple Mac mini (2007, Intel Core Duo), with Mac OS X Leopard (10.5). I installed this software via the original installer DVD, but i could intall combo update (it downloaded it, and after restarting it stops on the blue screen with the blue loading line [but it didnt load], it tried to install allnight long), and Snow Leopard (10.6) also.
    Hardware Overview:
    Model Name:     Mac mini
    Model Identifier:     Macmini2,1
    Processor Name:     Intel Core 2 Duo
    Processor Speed:     1.83 GHz
    Number Of Processors:     1
    Total Number Of Cores:     2
    L2 Cache:     2 MB
    Memory:     1 GB
    Bus Speed:     667 MHz
    Boot ROM Version:     MM21.009A.B00
    SMC Version:     1.19f2
    HD: 80 GB

    You have enough memory for Snow Leopard:
    https://discussions.apple.com/docs/DOC-2455
    And if you want to install Lion, first read this tip:
    https://discussions.apple.com/docs/DOC-6271
    Then:
    https://discussions.apple.com/docs/DOC-2465
    Unfortunately your Mac Mini is too old for 10.8 or later.

  • Does a mac mini 2007 with osx 10.6.8 supports 10.7?

    I have a friend who has a Mac Mini 2007 with osx 10.6.8, and he wants to upgrade 10.7 for different reasons, does the mac mini supports it?
    Processor: Core 2 duo 2GHz
    RAM: 2 DDR2
    Thanks

    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • I am trying to get Zen-Cart on my mac mini server lion 10.6

    I am trying to get Zen-Cart on my mac mini server lion 10.6 and am stuck getting mysql installed.
    Bassiclly what I am trying to do is have a cart for my site I host locally  I used iWeb to creat the site and it has no cart plug in I am aware of which makes it useless for ecommerce.  Other than that it is nice to use maybe im missing somethin?  So I am looking for solutions to get Zen Cart installed (easilly) to include mysql since OSX does not have it.  Some questions
    Is there a good free packaged installer for mysql and or zencart?
    is there a better OS cart solution for OS X ?
    Can iWeb be updated by me to host an e cart, or is there a plug in I can get?
    Other?

    Hello,
    Is this Win 7 32 bit version?
    If so & you don't want to upgrade to the 64 bit version...
    There is Parallels...
    http://www.parallels.com/
    VmWare Fusion...
    http://www.vmware.com/mac
    VirtualBox...
    http://www.virtualbox.org/wiki/Downloads

  • How do I set up my Time Machine and Mac Mini with Lion Server so i have one wifi loop in the house?

    HELP!
    So I have had a Time Machine wifi loop at the house for approx. 6 years. I run two Macbooks, 2 iPhones, 2 iTouch and a Samsung Smart Blueray on the loop.
    I just bought a Mac Mini with Lion Server. When setting it up I'm not sure what or how I managed to do, but I now have 2 wifi loops, one doesn't lock and niether will support the Samsung BlueRay. Also, each time I want to go online with one of the other Mac devices i have to relog into the wifi loop.
    Can someone please walk me through the fix. The mac Mini is plugged straight into the Time Machine to recevie its internet connection.
    Thanks!
    John

    You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
    Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
    Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
    (Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
    But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
    Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
    Then set DHCP for clients that will join.. this can then expand the scope of addresses..
    It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
    Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

  • Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. Does any one know how I can get it to recover?

    Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
    apple.com/support
          -6002F
    Does any one know how I can fix this without a recovery disc? Thanks

    I just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
    I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
    I tried swapping with a Mechinal Harddrive, no luck.
    Kept the Mechanical drive in, and tried with some other Ram, it worked..
    So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
    It was Ram for me..

  • I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    I have a new Mac Mini with Lion. I am entitled to a free copy of  Mountain Lion. Where do i download it from?

    http://www.apple.com/osx/uptodate/

  • Just got a new Mac Mini with Lion - where is the downloads folder in the Window tab that is at the top of the page in Safari?  I used this a lot and really miss it!

    I just got a new Mac Mini with Lion - the Window tab at the top of the Safari Browser used to ahve a downloads folder in it along with Activity etc - but it is not there anymore. Any way to get it back or is there another location it sits in?  I used it when I'd copy video info from the activity folder and then paste into the download folder and presto - I downloaded the video onto my computer.  I really miss this capability!

    Download activity is found by clicking on the gadget on the right:

  • I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke off

    I Took apart a mac mini 2007 and i cant put it back together and a part holding the cmos battery broke offplease i need serius help

    Yikes, see if anything here helps...
    http://www.ifixit.com/Teardown/Mac-mini-Model-A1283-Teardown/659/1
    And on yhe battery clip, do you suppose Super  Glue would work?

  • Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

    Hi Guys,
    I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
    What is the problem here so I can get Pictures onto my Computer. ,

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • I recently purchased new Mac Mini with Lion installed. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini.

    I recently purchased a new Mac Mini with Lion installed. I downloaded the latest version of iTunes. Now I can't get iTunes to sync iCal from my iPod Touch (3rd gen) to my Mini. Everything else syncs great, and iCal syncs from my Mini to my Touch. My Touch has the latest iOS installed. I have tried rebooting my Touch, removing the sync calendars option from iTunes>Info and checking it again after applying and closing iTunes, and restarting my Mini. Any help will be appreciated!

    Ongoing thread with the same question https://discussions.apple.com/thread/3209335?tstart=0
    Stefan

  • Imovie for mac mini OS Lion 10.7.5

    I have a mac mini running Lion 10.7.5 I need imovie, I bought this machine 2nd hand. Tried to upgrade to maverick it won't work. The version of imovies on apple does not work with Lion. This is why I tried to upgrade to maverick. Where can I get an earlier version of imovie or ilife that will work on my machine?

    Only by purchasing a earlier version of iLife from Amazon or eBay. iMovie by itself is not available as a download.
    Note that versions earlier than iMovie 6 will not work with Lion.

  • If I bought my Mac mini with Lion already loaded, is it necessary to upgrade to OS X to Mountain Lion?

    if I bought my Mac mini with Lion already loaded, is it necessary to upgrade to OS X to Mountain Lion?

    For you maybe, but Mavericks is better than Mounatin Lion for me, not to mention that is free.
    I still maintain a Snow Leopard partition for some older software, but see no need to keep a partition for either Lion or Mountain Lion.
    IMHO, yours may vary.
    P.S., I think most will agree that Mounatin Lion was superior to Lion.

  • IWeb works on Mac mini with Lion ?

    iWeb works on Mac mini with Lion ?

    Probably best to ask in the iWeb forum.
    https://discussions.apple.com/community/ilife/iweb

  • Japanese mac mini with lion

    i just ordered mac mini with lion in japan store.
    but next month i will leave this country.
    my concern is about its language setting: is it possible to switch the language instruction from japanese to english?

    All versions of OS X are multilingual and the interface language can be switched in a few seconds via system preferences/language & text/language.  You put the language you want at the top of the list and logout/login.

Maybe you are looking for

  • Getting error 025036 while setting bind variable value

    Hi, I have created a view object (ViewObj) having bind variable (Bind_Val). I am writing custom java method in AppModuleImpl.java, so that I can use that in serviceInterface. my method is: public void Met(String a){ ViewObjImpl vo=new ViewObjImpl();

  • Drive has a hardware problem that can't be repaired?

    I have had a Lacie 1TB 7200RPM external drive for about  3 years now. In the last two days I got this message when I went into disk utility. "drive has a hardware problem that can't be repaired". I was able to back up all the info off of the drive. I

  • Color me DVD

    I think I saw some responses on this, but if anyone can provide specific, unique assistance for me, I be much obliged. I'm working on Mac Pro (Intel, 2.33 GHz) with FCE HD 3.5 and am using iDVD to burn. I'd like to use DVDSP3, but since it don't play

  • How to Flex tree control using folder click event  to pass coldfusion to get data from dynamiclly ?

    Hi friends.........             Iam using flex tree control data coming from coldfusion file to display grid. As i click the tree folder to change the data from dynamic from grid. How to pass the folder id from coldfusion file.. Is it possible ?.. Me

  • General problem with preloaders

    Hallo there, i am using a preloader from an external file, that when the main animation loads, it displays it, clasicaly. the problem i encounter is this. when the animation loads, it doesn't start from frame 1, but instead from frame 50, for example