Mac Mini 2010 Aluminum Temperatures and Overheating

I shut down my 2010 Mac mini right before going to bed. In the morning, I noticed that the Mini did not completely shut down. It was stuck on an all blue screen. I had to force quit and restart.
When I restarted I noticed that the temps were VERY high. I wonder if the Mini can still shut it self down when it is stuck on the last blue screen before it turns off?
Second:
The Mac was vey hot when I touched it. I felt like it needed to be cooled down.
I took an all aluminum pot from the kitchen that has a very thick very flat and smooth bottom, filled it with crushed ice and felt the bottom. WOW was it cold. So, I placed the pot on top of the mini. In about 2 minutes I got:
Ambient Air 22ºC
CPU A Heatsink 30ºC
CPU A Proximity 28ºC
CPU A Temperature Diode 32ºC
CPU Core 1 32ºC
CPU Core 2 30ºC
Hard Drive Bay 1 21ºC
Main Logic Board 28ºC
Memory Bank A Point 1 26ºC
Northbrldge Chip 30ºC
Northbrldge Chip 34ºC
Northbrldge Position 1 51ºC
Opilcal Drive 19ºC
Has anyone tried that before? Or am I the only idiot?
Message was edited by: Vernon Alexander

Knowing you can set your TV to 1:1 pixel mapping is a huge step in the right direction, and should allow you to avoid issues of the image going beyond the edges of your screen. You should not experience a blurry image overall with that setting, but you may have to do some adjusting to get fonts to look acceptable on your TV. If your primary use will be with Plex however, this may not be a concern at all.

Similar Messages

Mac Mini 2010 and Windows 7

Hello All,
I searched the forums to see if my question had already been answered, but I couldn't find it. My apologies in advance if this, in fact, is solved. I am having some issues with my installation of Windows 7 on my Mac Mini 2010 model 2.4Ghz Core 2 Duo. I used boot camp to create a partition, installed windows 7 64 bit from a copy that I bought from school, and it did install.
Problem 1
The problem that I am having is that the operating system states that 4GB of RAM is available and 3.5GB is usable. I currently have 8GB installed(Not factory, I purchased third party) and it reads fine in Mac OS X. Does anyone else have this problem or a similar one?
Problem 2
The screen will not expand fully in Windows 7. I have an ASUS 21.5in HD screen that will display up to 1080p connected to the HDMI connection on my mac. When I boot up, the screen will display in a smaller size(about 3/4 the size of the screen) while the rest of the screen is black.
What have I tried?
I have updated to the latest boot camp package on the Apple website to make sure I have the latest drivers for my NVIDIA GeForce 320M card.
I have tried playing with the resolution in Windows 7 to display the maximum possible resolution
I have made sure to install all Windows 7 updates.
Problem 3
I don't have full access to the monitor menu. When I touch the menu button, I can only change the brightness, sharpness, and that is it. I can't do anything about expanding the screen, moving the screen left or right, etc.(If I did have these options, then problem #2 would be solved).
Nothing has worked.
What do I think...
I am thinking that it has something do with the fact that I am running the screen from the HDMI, although I don't really know why. It could also be the monitor. I could try to purchase the Mini Display Port adapter to see if that offers a better resolution, more freedom with my monitor, etc. This would fix problem 2 and 3. I did order a 24" Apple Cinema Display which will be here in a few days. If everything works with that, then I guess I wouldn't have a problem anymore, but I think it should still work with my existing monitor.
As for the first problem, I am at a loss. Does anyone have any ideas?
Thanks for reading.

I completely agree with your assessment for Problem #1, but here we have it.
I will try re-installing and will also double check with the drivers for the monitor. Thanks for the advice. If all else fails, I will just use parallels.

How do I install Windows 8 on Mountain Lion (mac mini) 2010 Server using bootcamp with out Optical Drive?

I have a 2010 Mac Mini server running 10.8.4 (12E55). I just bought a brand new copy of Windows 8 from micrsoft. I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5. I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support). I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition. I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS.
Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book. If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer. Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up.
Now I just put the DVD that they made me in my macbook and it shows up as bootable disc. But the USB doesn't. (1 hour later) I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.

mikkel-kj wrote:
These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
Mikkel
Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows.

Problem upgrading memory of a mac mini 2010

I have a Mac mini 2010 with these memories
2 x 1GB PC2-5300 667MHz Ram
http://i.imgur.com/L25KW0q.jpg
I bought a memoir of Ebay and do not work.
Insert 2 modules and makes strange beeps on boot, if I put up does nothing starts without beeping and not send video signal and if I put the form below makes the odd beep.
They are:
RAM-DDR3-Macbook-pro-mid-02.02.2012-GB-4GB-mt8jtf25664hz-1g6m1
It is this: http://imgur.com/DFV7s99
2GB 1RX8 PC3-12800S
http://es.wikipedia.org/wiki/DDR3_SDRAM
Turns out I tried i7 laptop with (DDR3, 10600, 1333-MHz) and worked and this is (12800 DDR3-1600) art of a MacBook Pro 2012 ...and does not work ...
Can anything be done?
Perhaps better than store or sell ...
My laptop has Windows 8Gb and may put them at Mac and these 4Gb the laptop i7, but maybe worse.
Greetings

A mid 2010 Mini needs:
Maximum Memory
16 GB (Actual) 8 GB (Apple)
Memory Slots
2 - 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM

Mini DisplayPort to DVI-D adapter works with Mac Mini 2010?

Hi,
I would like to connect my Mac Mini (2010 edition) to both my Samsung PX2370 display and my LCD TV. Currently, I only have the Samsung display connected through the included HDMI-to-DVI adapter, but I'd like to use the HDMI output to directly connect my LCD TV, and connect the Samsung display by using a Mini DisplayPort-to-DVI adapter, like the one that is for sale at the Apple Online Store. Such adapter should work without trouble with any MAc computer that has a mini DisplayPort output, including the Mac Mini, right?
Thanks in advance for your support.

You're right, but I forgot to mention that the Samsung display is just an LCD monitor, so I don´t really need to get audio output for both connections
Currently, I use an HDMI-to-DVI adapter to connect the Samsung monitor, but I'd like to use the HDMI output to connect my LCD TV instead (and probably a home theater system in the future), and use the Mini DisplayPort output for the monitor, so that I can have a dual-display setup.
I asked this question, because I read the description for the Mini DisplayPort-to-DVI adapter in the Mexico Apple Store web page, and that description tells that only Macbooks support the adapter. In the US Apple Store page, it does tell that the adapter is supported by any Apple computer with a Mini DP connection, so I just wanted to confirm which description is true, to avoid confusions.
Anyway, I appreciate that you took the time to respond... Regards!!

Mac mini 2010 very slow after update to Mavericks

My mac mini 2010 (2.4 Ghz, 8GB ram) is running really very slow after updating to Mavericks.
Clearly OneDrive is a pain... but had it running on ML as well, and though it is a memory and CPU hog, it never really slowed down the system.
This is what Etresoft says:
EtreCheck version: 1.9.15 (52)
Report generated 21 Aug 2014 19:39:34 GMT+2
Hardware Information: ?
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 320M - VRAM: 256 MB
32LG3000 1360 x 768 @ 59 Hz
System Software: ?
OS X 10.9.4 (13E28) - Uptime: 1 day 0:0:8
Disk Information: ?
TOSHIBA MK3255GSXF disk0 : (320,07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 319,21 GB (104,99 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ?
Western Digital Ext HDD 1021 1,5 TB
S.M.A.R.T. Status: Verified
BigOne (disk1s1) /Volumes/BigOne: 1,5 TB (16,45 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
Logitech USB Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.Cycling74.driver.Soundflower (1.6.2 - SDK 10.6) Support
[not loaded] com.iospirit.driver.RBTSRPlugin (1.18 - SDK 10.6) Support
[loaded] com.iospirit.driver.rbiokithelper (1.18.1 - SDK 10.6) Support
Problem System Launch Daemons: ?
[failed] com.apple.softwareupdated.plist
[failed] com.apple.wdhelper.plist
Launch Daemons: ?
[loaded] com.iospirit.candelair.daemon.plist Support
[loaded] com.iospirit.candelair.sync.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
User Launch Agents: ?
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
[loaded] com.google.keystone.agent.plist Support
[running] com.plexapp.helper.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ?
iTunesHelper
Preview
ElementsAutoAnalyzer
Google Chrome
SEC Helper
Internet Plug-ins: ?
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Candelair Support
Perian Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 199.51 GB
Destinations:
BigOne [Local] (Last used)
Total size: 1 TB
Total number of backups: 84
Oldest backup: 2013-07-17 22:07:43 +0000
Last backup: 2014-08-21 17:31:13 +0000
Size of backup disk: Excellent
Backup size 1 TB > (Disk size 297.29 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      78% OneDrive
      3% ScreensharingAgent
      3% WindowServer
      0% Google Chrome
      0% fontd
Top Processes by Memory: ?
1.18 GB OneDrive
90 MB Google Chrome
82 MB Finder
57 MB mds_stores
51 MB Google Chrome Helper
Virtual Memory Information: ?
4.46 GB Free RAM
1.94 GB Active RAM
321 MB Inactive RAM
908 MB Wired RAM
3.02 GB Page-ins
506 MB Page-outs

Chances are you have applications that are out of date and need to be updated. Another possibility is Spotlight is indexing and you to wait until it has finished.

Audio Output from Mac Mini 2010

Hello -
I purchased a mac mini 2010 this weekend for use as a home theater PC. I've got it connected to an Onkyo tx-sr604 a/v receiver via HDMI. I then pass the HDMI signal from the Onkyo to my hdtv, so I think it just passes through. For audio, I use a surround sound system. And, in case it matters, I have a second tv connected via the DVI output on the mini.
The Onkyo indicates that the audio input signal on the HDMI is PCM Multichannel. When I play movies (e.g., Netfix or DVD) or music (e.g., pandora) on the mini, I don't get any sound on the center channel in multi-channel mode. In direct mode, I only get sound in the front left and right speakers. I'd like to have normal surround sound.
Is there not a way to get 5.1 surround sound from the mini? Or, am I missing a set up or something? If I connect my receiver to the mini with the digital audio output, will I then receive digital audio?
Thanks.

Welcome to the Apple Discussions!
Mike it is my understanding that if you want 5.1 Surround sound that you must connect the mini directly to the SS system and not pass the audio signal through another device.
Dah•veed

Is the current top line Mac Mini with an SSD and 16GB RAM up to PS CS6 and LR5?

I currently have a 2007 MacPro 2007 2.66GH Xeon dual core ( 4 cores ) with 9GB RAM.
I had been thinking of the new MacPro but it will probably be hellishly expensive. I was thinking of getting a top of the line Mac Mini with 16GB RAM and an SSD and using USB 3.0 and Thunderbolt to run most of my programs and data storage externally. I use LR5 and PS CS6.
I was just wondering if the latest Mac Mini was up to the taks with 2-4 GB files and multiple layers? How well do this little guys hold up? I know that the power supply is now internal. Do they run cool enough.... even with an SSD?
Any Mini users out there care to chime in?

Well, the big drawback on the Minis is Intel integrated Graphics.
iMacs & Minis run far too hot in my Opinion, Apple likely tested them in a 68° F. air conditioned room.
I myself would be looking into an older iMac, or Widows PC!
iMac "Core i5" 2.5 21.5-Inch (Mid-2011)... Geekbench: 7241/7970
iMac "Core i5" 2.7 27-Inch (Mid-2011)... Geekbench: 7844/8565
iMac "Core i5" 2.7 21.5-Inch (Mid-2011)... Geekbench: 7890/8647
iMac "Core i7" 2.8 21.5-Inch (Mid-2011)... Geekbench: 10248/10690
Mac Pro "Quad Core" 2.66 (2009/Nehalem)... Geekbench: 8269/9237
iMac "Core i5" 2.9 27-Inch (Late 2012)... Geekbench: 9225/10271
Mac Pro "Eight Core" 2.8 (2008)... Geekbench: 9162/10564
Mac Pro "Quad Core" 3.2 (2010/Nehalem).. Geekbench: 9850/10440
MacBook Pro "Core i7" 2.5 27" Late 2011... Geekbench: 10706/11699
Mac mini "Core i7" 2.6 (Late 2012)... Geekbench: 11367/12807
iMac "Core i7" 3.4 27-Inch (Mid-2011)... Geekbench: 11648/12651
Mac Pro "Eight Core" 2.26 (2009/Nehalem)... Geekbench: 11864/13363
Mac Pro "Eight Core" 2.66 (2009/Nehalem)... Geekbench: 14317/16093
Mac Pro "Eight Core" 2.93 (2009/Nehalem)... Geekbench: 15572/17619
Mac Pro "Twelve Core" 2.66 (2010/Westmere)... Geekbench: 20294/22605
iMac "Core i5" 2.7 21.5-Inch (Late 2012)... Geekbench: 8068/9145
Mac mini "Core i7" 2.3 (Late 2012)... Geekbench: 10626/11825
iMac "Core i7" 3.1 21.5-Inch (Late 2012)... Geekbench: 12490/14143
iMac "Core i7" 3.4 27-Inch (Mid-2011)... Geekbench: 11648/12651... Geekbench: 12857/13772

Overscan missing from new Nvidia Drivers - Mac MIni 2010

So I was able to install new Nvidia drivers on my Mac mini 2010, however, there are no overscan options.. and my tv is connected via HDMI. Is there any workaround for this?

The final version of Appleworks 6 does in fact work on the Intel Mini under Leopard -- but Apple doesn't support it, nor ship it with the new Minis.
A free office suite that is MS Office compatible is NeoOffice:
http://www.neooffice.org/neojava/en/maindownload.php
a similar alternative is OpenOffice:
http://www.openoffice.org/
There is no office suite that is directly compatible with Appleworks files, but if you install AppleWorks 6 on your Mini, you could export files in formats that other office programs can read.

Problems with mac mini recognizing aluminum keyboard

I have a Mac Mini 1.4ghz dual core and I have problems with it recognizing the apple aluminum keyboard. The keyboard works fine with my macbook. The keyboard actually works fine if I do a restart but if I shut it down and then open it, the keyboard was not recognized. I spent hours with Apple support trying various combinations of connecting and reconnecting to the usb ports. I did my own research and found that I could get the keyboard to work if I connected it through an external 4 slot usb hub, although it showed that it was connected through aa a usb 2 hub rather than the usb 3 hub which is standard on the mac mini. Shutting down and starting up with the external 4 slot usb hub (it does not have its own power source) always works. All of my other devices work flawlessly with all the usb ports on the mac mini. I finally (although I doubt that this is final) was able to get the keyboard recognized on the mac mini by plugging the keyboard into my macbook and then plugging my iPhone into one of the usb ports on the side of my keyboard. I unplugged the iPhone from the keyboard and I then plugged the keyboard directly into the mac mini and it was recognized and worked fine. I did a restart and the keyboard worked fine but I am a little reluctant to shut it down for fear that on start up it will be lost again. The only thing I can think of is that I had the iphone plugged into the keyboard before this all happened and unplugged it without removing the iphone from the desk top and that screwed things up. It is the only conclusion I can come to. I would appreciate any thought or ideas people might have. As I said I spent two days and may hours with apple support and they could not help me other than to tell me to take everything to the genius bar which I am reluctant to do.

Thanks for the response but I think maybe you missed part of my post. The keyboard works fine with my mac book and with my son's macbook. The keyboard is actually working right now. It has been a problem with shut down and then strart up. I think that I went through all those other SMC and PRAM efforts with Apple support and actually many others and they were completely stumped. I think that this is a complicated problem for which there may only be a work around but I am hopeful that the next time I shut down, it will work. I appreciate ideas but if my 4 or 5 hours with Apple support cannot help, I do not believe this is going to be a simple solution but if someone has encountered this or something similar, I would welcome their ideas. I have gone to the Apple Store in Madison, WI on several occasions and unfortunately I often know more than the people that help me so I am reluctant to go there and to trust the staff at the genius bar. For example, I recently purchased and Apple watch and the first person that helped me did not know how to turn it on and the second person did not know it came with two different length bands, and I once bought a case for my iphone and the person who helped me was more interested in the color than in the functionality of the case. I could go on but I am not confident in the competence of the staff there so I am hoping that someone in the support community can help me.

Upgrade Mac Mini 2010 to SSD, have you tried this?

Hi all, and this is my first discussion thread.
I'm currently running my Mac Mini 2010 with a SATA Male to Female cable and ext. SATA power on a WD VelociRaptor 150GB.
The solution isn't really elegant i feel and it generates alot of heat from the drive and some extra noise when loading heavy applications eg. parallels desktop.
I've even up the ram to the max 8GB as well and everything seems zippy so far.
Earlier there are alot of talk about SSDs requiring TRIM on the operating system and as what we know Mac OS X Leopard
does not have integrated TRIM support.
So i'm basically looking at SSD candidates that will:
- run the power provided by the Mac Mini's (5V) integrated PSU
- don't require TRIM support to manage garbage collection on the hardware level.
So far, i've only 2 candidates:
- Crucial RealSSD
- Kingston V100+
Which one will you shell out for and why?
Additional question:
- If i remove the superdrive on my mac mini, can i get a external USB superdrive? is there such a thing at all?

theres no reason why it should not work, plug in the HDMI cable, select the Source input on LCD(HDMI 1/2), if still no picture on the Mini open System Pref>Display : Resolution> it should show 480p, 720p, 1080i, 1080p and other lower resolutions, just select 1080p and to your right select 60hz. Hope this helps.

Mac Mini 2010 superdrive noisy

I just bought a Mac Mini 2010 from 2nd hand on ebay.
I thought that the reader is noisy when you turn on your macmakes as if to remove a disc from inside, (the 2007 model didnot remember).
After installing Office 2011 from a dvd and another iLife'11, especially with the office to sound a bit unusual and has taken much as 26 minutes to install everything.
I went to the support site, and updates for Mac mini-superdrivefor reading, I've downloaded and tell me you do not need to apply them to my mac.
Thanks

Alguna solución ?
Veo que usa el lector superdrive Hitachi-Lg GA32N

Mac Mini 2010 Hardware Test w/ Lion

I have a mac mini 2010 that came with snow leopard installed. I recently upgraded to Lion, however I need to do the Apple hardware test. When I attempt to load the hardware test by holding down the D key when booting the Mac Mini the hardware test fails to load. What do I need to do to load the Hardware test?

How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error

Mac mini 2010

Hi i own a mac mini 2010 with core 2 duo and nvidia 320m i was wondering if i could get a link for the bootcamp software drivers for windows because i lost my dvd
I need all the drivers

http://support.apple.com/downloads/#macoscomponents
Per this
http://support.apple.com/kb/ht5634
You need version 4

My mom threw away my box with my install discs my retail snow leopard disc doesn't support mac mini 2010 ethernet. can apple help me ?

my mom threw away my box with my install discs my retail snow leopard disc doesn't support mac mini 2010 ethernet. can apple help me ? less than 1 month old.

You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

Mac Mini 2010 Aluminum Temperatures and Overheating

Similar Messages

Maybe you are looking for