Mac Mini 2011 and Samsung 940bw

Hi I have just (this afternoon) purchased a Mac Mini
I have connected it with the hdmi to dvi converter to my Samsung 940bw, and it does not want to recognise the monitor. I can hear the start chime so I know the unit is booting up.
I have connected it my my Samsung 2232bw and it works perfectly, any one know how I can get it to recognise the 940, I've tried things like lowering the resolution while connected to the 2232 and then connecting it to the 940, and it still doesnt want to know.
Any ideas?
Cheers
Jo

Do you need to push the source button on the monitor (button just to the left of the 'auto' button) so it recognizes the digital input?

Similar Messages

I always had a windows PC, just bought a Mac Mini 2011 and I'm loving it, very powerful and exciting

I always had a windows PC, just bought a Mac Mini 2011 and I'm loving it, very powerful and exciting
great....

Welcome, young Jedi, to the Dark Side.
Happy threads are rare these days in the "emergency room".
Master Yoda will see you in a moment, but first some basic prep-work to help you defend against "OMG! Need to reinstall but no disks!" threads.
Here is a basic bit of knowledge you may want to gain about system rebuild in the world of "no install disks included": http://support.apple.com/kb/HT4718
And how to make a "local/real" copy for re-install from a thumb drive you prepare: http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml

Mac mini 2011 with samsung UA32D5000PM

I purchased a mac mini 2011 recently and hooked it up to my samsung UA32D5000PM with HDMI cable. I am getting terrible image quality setting the display to 1080p. This is very frustraing, someone pls help!

I managed to solve in my Samsung LED TV 40 -
I clicked on the Source button on my TV remote control. Then click on Tools on the HDMI port on which the mac mini is connected.
Then select Edit Name. not type the name, chosen from the list option DVI PC and it was amazing, it worked fine for me, so I have to improve the contrast now.

Mac Mini 2011 and EFI

Hi, does anyone know if the New Mac Mini 2011 being sent out if purchased from the online store has the EFI firmware ready installed?
I guess only someone who has received one in the past week would know
I am about to buy one to update from early 2009 model and wonder if I should hold back for a bit.
Thanks

Thanks for the information, just ordered, so I know what to check for when it arrives in the next week or so.
John

Mac Mini 2011 and Mountain Lion ERROR?

Hello! I have a Mac Mini 2011 that came with Lion, since I uprgade to Mountain Lion, my Mac Mini stops working (Mouse Freezes) and a GRAY SCREEN APPEARS!! and says that the computer have to RESTART! Any Ideas?
Thanks

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Opinions about if Mac Mini 2011 works ok with VGA monitors

Hi Community,
I have a old HP PC, I want to buy my first Mac Mini and used the keyboard, mouse and VGA monitor (Mod. HP Pavillion mx50) that I have.
Before I purchase the new Mac Mini 2011 and Mini DisplayPort to VGA Adapter, I would like to know if it works ok with my old components, specially with the VGA monitor? I've read on this Community there some persons have monitors problems.
I don't want spend my money and then have problems with the Mac Mini.
Thanks in advance,

MiniDisplayPort-VGA adapters. Available in the online store, at Apple stores, or at BestBuy/MicroCenter/Fry's. Plugs into the Thunderbolt port.
Usually works without issue. But then I use monitors made by LG and Samsung. Others use lesser known brands or models know to have quirks and encounter issues.
Some things to watch for:
Soem adapters have too much plastic coveing the "connection plate", and the cable cannot seat fully. If you just look at one that has too much plastic, you will know what I am talking about.
VGA signals from Macmini are not strong enough to get through mutliple adpaters. If you want a VGA signal, buy 1 VGA adapter. If you want a DVI signal, buy only 1 DVI adapter. Do not get a DVI adaper, than add a mid-line converted to change the DVI adapter to a VGA port.
If you plan to run Windows under BootCamp, the Windows driver for the Tunderbolt port does NOT output snalog (VGA), just digital (DVI, HDMI). So if you plan to use VGA to display Windows output, run Windws under "VM software" (Parallels or VM Fusion) so that OSX can make the VGA signal for you.

Monitor for mac mini 2011

Getting a mac mini 2011 and will have to get a new monitor. Apple too expensive. Any recommendations? Looking into Samsung, LG.
Thanks
Rope

I'm using a Samsung SyncMaster SA350 with my 2011 Mac Mini and am more than happy with it. I was always an Apple snob and would onyy buy Apple monitors but since buying this Samsung monitor two weeks ago my attitude has changed. And to think that it only cost me £180 and it even works perfectly HDMI to HDMI which is one thing that a lot of people can't get to work with their expencive monitors. Oh and by the way the picture quality is perfect easily as good as any Apple monitor that I've had.

Unable to Troubleshoot Power Issues on Mac mini 2011

I have been having odd and intermittent power issues with my Mac mini 2011 and could really use some help before I resign myself to taking it into an Apple Store. It's under warranty, but I now live in another country so I hope I don't need to ship it should it come down to that.
However, I have searched this topic a lot, and not only have I tried troubleshooting it, I haven't seen any power issues with other owners of this model. That leads me to think that the power supply itself is probably OK.
First of all, I live in China and the building I live in seems to have a questionable power supply. The air conditioner for example simply would not work and the repairman spent two hours messing around with wires inside the outlet and in the breakers. That did the trick, so I wonder if I'm simply not getting enough juice?
Main symptoms:
- My monitor recognizes an analog signal but will not light up (black monitor). Unplugging and replugging adaptor doesn't do anything.
- Startup Keyboard Commands (e.g. Cmmd-R) may work, but I can't tell because the monitor won't light up. Letting the computer boot up though I can hear keyboard volume keys and such making the standard sounds. I can usually restart using the keyboard too.
- My 2T external HD more often than not dismounts as well.
- I can't hear any computer activity after the chime (hard drive, etc.).
- Since I can hear the chime and there is audio feedback through the keyboard, I think that eliminates hardware problems such as logic board failure or bad RAM.
- I can't boot even if I unplug all USB peripherals.
- Holding down the power button (I have it set to make the computer sleep as well as shut down) often won't shut down the computer, but it seems to stay in sleep no matter how long I hold it. Unplugging the computer finally shuts it down, obviously.
- Unplugging and waiting 5 minutes or so and powering up again doesn't seem to make any difference, nor does switching sockets, plugging directly into the wall, etc.
Problems began about two weeks ago, got better, and then worse again. Now I'm just keeping the computer and monitor on (never sleep 24/7).
Miraculously, after much frustration and countless restarts, suddenly the screen will turn on to reveal a fully booted system that was running all along in the background. No startup screen- the monitor just magically comes on again. Often I find that my external has unmounted, but it's no big deal to get to remount. At this stage, the Mac is still very quiet and for a while the system is sluggish, though it hops back into action in 5 or 10 minutes.
At first I thought it was just my monitor, and though that's possible I suppose, it seems I'm just not getting enough juice. Once the monitor is on though, everything is fine: I can power it off and on with no problems. But I can't just leave my computer on forever though.
Any help appreciated.

Well, with the other monitor (which did not work with the mini either but worked fine on a laptop), I was able to narrow the trouble spot down to either a faulty Mini Display to VGA adaptor or a damaged port. I could determine that all the other ports (incld. the USB drive, programs, internet, etc., were all working fine behind the big black GUI all through sound feedback, so I seriously doubted it could be a supply problem or a residential electric problem.
I took my mini and adaptor to a "Mac Shop" (reseller) here in China, and found it quite professional, just like a Mac Store. They tested my machine, and although they didn't have VGA monitors, they said I could return the new $30 USD adaptor if it didn't work. But as I'm writing this on the monitor now, the new adaptor did the trick.
The long and short of all this is that I've read a lot about display problems with the mini and I suspect that most of these problems are adaptor related. I myself tried to save some bucks by buying a third party plug and lived and learned. I hope the Apple adaptor works like a champ, and if it doesn't, I'll know the first thing to eliiminate next time.

WiFi slow when running Windows 7 on Mac Mini (2011)

Hi,
I have just bought a Mac Mini (2011) and used Boot Camp for installing Windows 7 as well. However I am experiencing some problems with the WiFi when running Windows. The speed is less than 10% of what it should be. I have tried connecting a network cable and then everything is running fine. When booting into OS X Lion there are no problems with running WiFi. I have tried to rightclick on the network adapter and select update drivers but it says that the driver installed is up to date.
Any ideas?

Apparently it was a router issue. When I connected my old Cisco router as an extended access point both the Mac OS and Windows session connected as supposed to. I made a factory reset of the router provided by my ISP, configured it again and the problem apparently seemed to be solved.
However overnight the problem occured again - I swithed the router off and on again and was able to connect. I noticed in the DHCP log that when running Mac OS the computername "My-Mac-Mini" is sent to the router with the MAC address of the network card - when running Windows it is the machine name I entered during the Windows installation. Not sure if that is confusing the router from my ISP but after I changed the computername in Mac OS the connection seems stable.

How to create bootable USB thumb drive from Lion on Mac Mini 2011?

Hello folks
Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
Greetings
Jocau

After doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
OS X Lion: About Lion Recovery
Lion Internet Recovery
If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
Source: Lion Recovery
It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it.

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade

iCloud requires OS X 10.7.2.

External iSight and Mac Mini 2011

I always loved the industrial design on the external isight and would like to buy one. How ever will it still work with my 2011 mac mini? And which isight revision should I look for? What are the differences among them?

(1) If the old iSight you buy still works, it should work with your Mac mini.
    (But see ¶s 2. & 3. below.)
To connect the FW400 external iSight to your FW800 mini, you will need a Firewire 400-800 cable or adapter. I suggest you have more than one of these so you can test whether any problem you encounter might be due to a bad connector.
Any working one(s) of something like those listed here should work to connect a FW400 external iSight:
• This Firewire 400-800 cable can work: http://store.apple.com/us/product/H7041ZM/A (I use this one.)
• Some users report that this low-priced alternative cable works:
     http://www.newegg.com/Product/Product.aspx?Item=N82E16812189097
• To use a FW400 6pin-6pin cable like that which came with external iSights, you can use a 6pin-9pin adapter like one of these:
http://tinyurl.com/ydsbb6m (I successfully use this one, too.)
If you encounter a problem, see Apple's troubleshooting suggestions here:http://support.apple.com/kb/HT2090
(2) I understand your attraction to the appearance of external iSight.
However, if I were buying another webcam today, I'd buy a new UVC (USB) webcam that has a warranty. Based on my budget and the camera feature I wanted, I would select a compatible camera like one of those discussed here:
     http://www.mac-compatible-web-cam.com/
My external iSights (I have two) are great webcams, but they are getting old (as consumer electronics go.) Both of mine still work as well as they did when they were new. However, some previously owned iSights may have suffered pretty rough treatment, and the only way to know whether any currently available external iSight works properly is to test it. If you still want to consider buying an External iSight, I suggest that you physically examine and test it on your system before you buy using the suggestions from this page:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
If you cannot try the external iSight before you buy, perhaps a trusted seller will give you a warranty for return or exchange privileges if the iSight will not work properly with your system.
(3) Additionally, unlike USB webcams, external iSight can be finicky about sharing a Firewire connection.
Chaining external iSight with other Firewire devices on the same Firewire ports often causes function problems. Because your mini has only one Firewire port, If your system includes other Firewire devices, you would most likely need to disconnect them in order to successfully use an external iSight with your mini.
For more info, see http://www.ralphjohns.co.uk/EZJim/EZJimpage6.html
(4) Info on iSight model versions: http://www.ralphjohns.co.uk/EZJim/EZJimpage10.html
Which particular model revision would be much less important to me than being able to test an external iSight to make certain it works with your system.
If you use an Apple Cinema Display, the RevC's magnetic mount may be desirable. However, other mounting solutions are possible: http://www.ralphjohns.co.uk/EZJim/EZJimpage9.html
(5) Your system info shows Windows® 7.
If you are considering using an external iSight with a PC, you should reconsider. More info: http://www.ralphjohns.co.uk/EZJim/EZJimpage12.html
Message was edited by: EZ Jim
Mac OSX 10.7.4

Mac Mini 2011 and Samsung 940bw

Similar Messages

Maybe you are looking for