Mac Mini (2011) audio & Bluetooth not working

Hi All
I have a 2011 mac mini (intel) but the audio doesn't work in windows 7 64 bit when connected via the audio output at the back (not hdmi), also windows cannot find the bluetooth drivers either. I have installed bootcamp windows support version 4 and no luck so far. Any help would be greatly appreciated since my local istore isn't reliable.

Ah, no joy, as suspected...I'm using Boot Camp version 4 and all i got was a flash drive full of boot camp version 3.1 - 3.3? A few firmware upgrades that says it isn't compatible...
IS THERE ANYONE AT APPLE THAT CAN HELP!!!
Jesus! I bought this a week ago and I can't even get audio! If this is the kind of service coming from Apple then I don't know...

Similar Messages

Mountain Lion Mac Mini Server Ethernet Port Not Working

I have a Mac Mini Server and once I upgraded to Mountain Lion Server the Ethernet port is unresponsive. It worked before upgrading. Is there something with Mountain Lion Server that is causing the Ethernet port not to work properly?

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

07' Mac Mini 4GB Ram Upgrade Not Working.

I have a 2007 Mac Mini (Intel Core 2 Duo) which runs slow with 1GB ram. I purchased two 2GB sticks of ram and replaced the two stock ram sticks previously making 1GB ram - But my Mac Mini will not boot with 4GB ram in it. I tried taking one stick out, leaving one 2GB stick in with no luck, and so I have no other ideas. I was told that this would be no problem, and I installed it all correctly following every procedure necessary.
Can anyone help me?

Komputerbay ram is sketchy at best, and another user here:http://forums.macrumors.com had the same experience you are having with that memory, the Mac will not even boot.
The memory for Macs has to be very precise, 5300/5400 is not acceptable as a rule. It must be straight 5300. If you can, return the memory modules and buy some guaranteed to work with your Mac. Go to OWC, http://www.macsales.com or Crucial, http://www.crucial.com who guarantee their memory to work or your money back.

Mac Mini extremely slow - Superdrive not working

I have a 2006 Mac Mini that has the following issues:
-cannot keep a wireless connection w/Airport (PC's in the house do)
-will not recognize dvds/cds nor will it write them
-slows to snail pace when running more than 1 application at a time
My brother suggested using the installs discs to whipe the mac clean because it would get rid of any virus/worm that might be on there.
My question is: Will upgrading from Tiger to Leopard whipe everything anyway, in addition to losing every file on my mac? Also, if I do have a virus/worm then what is the best protection for Macs?
I'm almost ready to give up and go back to Windows. I'm so frustrated with my mac!

Hi airheadial, and a warm welcome to the forums!
hpr3 gives some good advice to start with.
How much Memory do you have? How full is the Hard Drive?
It's not likely you have a Virus infection.
You could upgrade to Leopard without losing any files, but I don't think it'll cure the problem, especially difficult with no Superdrive!

HD Audio is not working in bootcamp windows in mac mini 2012

HD Audio is not working in bootcamp windows in mac mini 2012

Update to the latest bios: https://forum-en.msi.com/index.php?topic=163918.msg1260356#msg1260356 (Follow the guide)
>>Clear CMOS<<
Afterwards update the Intel Management Engine Driver in Windows.
Reboot and afterwards install current Realtek drivers: http://www.msi.com/service/download/driver-22481.html

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

Opinions about if Mac Mini 2011 works ok with VGA monitors

Hi Community,
I have a old HP PC, I want to buy my first Mac Mini and used the keyboard, mouse and VGA monitor (Mod. HP Pavillion mx50) that I have.
Before I purchase the new Mac Mini 2011 and Mini DisplayPort to VGA Adapter, I would like to know if it works ok with my old components, specially with the VGA monitor? I've read on this Community there some persons have monitors problems.
I don't want spend my money and then have problems with the Mac Mini.
Thanks in advance,

MiniDisplayPort-VGA adapters. Available in the online store, at Apple stores, or at BestBuy/MicroCenter/Fry's. Plugs into the Thunderbolt port.
Usually works without issue. But then I use monitors made by LG and Samsung. Others use lesser known brands or models know to have quirks and encounter issues.
Some things to watch for:
Soem adapters have too much plastic coveing the "connection plate", and the cable cannot seat fully. If you just look at one that has too much plastic, you will know what I am talking about.
VGA signals from Macmini are not strong enough to get through mutliple adpaters. If you want a VGA signal, buy 1 VGA adapter. If you want a DVI signal, buy only 1 DVI adapter. Do not get a DVI adaper, than add a mid-line converted to change the DVI adapter to a VGA port.
If you plan to run Windows under BootCamp, the Windows driver for the Tunderbolt port does NOT output snalog (VGA), just digital (DVI, HDMI). So if you plan to use VGA to display Windows output, run Windws under "VM software" (Parallels or VM Fusion) so that OSX can make the VGA signal for you.

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

I'm trying to connect my Kodak ESP c310 to my Mac mini but it's not coming up in my default printers menu and everything else is working. Their on the same network, software and drivers up to date, but can't get it to connect.

You can purchase recovery disks from HP. Here is a webpage showing you how to do that:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
If HP no longer supplies your specific recovery disk, you can usually find one from a 3rd party site, such as www.restoredisks.com for between $20 and $30.

Getting error "The disk you inserted was not readable by this computer." on mac mini and imac but it works on old macbook pro

Please help! My hard drives work on all other computers except new imac and macmini.

Both the mac mini and imac do not have cd drives. The trouble is why should I repair the external HDs when they work fine on other computers? I'm running OS X 10.8.4. I feel like its an OS X problem but I cant say. I will try the suggestion but I absolutely cannot reformat these drives right now becuae it would be way too time consuming to recover all the files on them

Unable to Troubleshoot Power Issues on Mac mini 2011

I have been having odd and intermittent power issues with my Mac mini 2011 and could really use some help before I resign myself to taking it into an Apple Store. It's under warranty, but I now live in another country so I hope I don't need to ship it should it come down to that.
However, I have searched this topic a lot, and not only have I tried troubleshooting it, I haven't seen any power issues with other owners of this model. That leads me to think that the power supply itself is probably OK.
First of all, I live in China and the building I live in seems to have a questionable power supply. The air conditioner for example simply would not work and the repairman spent two hours messing around with wires inside the outlet and in the breakers. That did the trick, so I wonder if I'm simply not getting enough juice?
Main symptoms:
- My monitor recognizes an analog signal but will not light up (black monitor). Unplugging and replugging adaptor doesn't do anything.
- Startup Keyboard Commands (e.g. Cmmd-R) may work, but I can't tell because the monitor won't light up. Letting the computer boot up though I can hear keyboard volume keys and such making the standard sounds. I can usually restart using the keyboard too.
- My 2T external HD more often than not dismounts as well.
- I can't hear any computer activity after the chime (hard drive, etc.).
- Since I can hear the chime and there is audio feedback through the keyboard, I think that eliminates hardware problems such as logic board failure or bad RAM.
- I can't boot even if I unplug all USB peripherals.
- Holding down the power button (I have it set to make the computer sleep as well as shut down) often won't shut down the computer, but it seems to stay in sleep no matter how long I hold it. Unplugging the computer finally shuts it down, obviously.
- Unplugging and waiting 5 minutes or so and powering up again doesn't seem to make any difference, nor does switching sockets, plugging directly into the wall, etc.
Problems began about two weeks ago, got better, and then worse again. Now I'm just keeping the computer and monitor on (never sleep 24/7).
Miraculously, after much frustration and countless restarts, suddenly the screen will turn on to reveal a fully booted system that was running all along in the background. No startup screen- the monitor just magically comes on again. Often I find that my external has unmounted, but it's no big deal to get to remount. At this stage, the Mac is still very quiet and for a while the system is sluggish, though it hops back into action in 5 or 10 minutes.
At first I thought it was just my monitor, and though that's possible I suppose, it seems I'm just not getting enough juice. Once the monitor is on though, everything is fine: I can power it off and on with no problems. But I can't just leave my computer on forever though.
Any help appreciated.

Well, with the other monitor (which did not work with the mini either but worked fine on a laptop), I was able to narrow the trouble spot down to either a faulty Mini Display to VGA adaptor or a damaged port. I could determine that all the other ports (incld. the USB drive, programs, internet, etc., were all working fine behind the big black GUI all through sound feedback, so I seriously doubted it could be a supply problem or a residential electric problem.
I took my mini and adaptor to a "Mac Shop" (reseller) here in China, and found it quite professional, just like a Mac Store. They tested my machine, and although they didn't have VGA monitors, they said I could return the new $30 USD adaptor if it didn't work. But as I'm writing this on the monitor now, the new adaptor did the trick.
The long and short of all this is that I've read a lot about display problems with the mini and I suspect that most of these problems are adaptor related. I myself tried to save some bucks by buying a third party plug and lived and learned. I hope the Apple adaptor works like a champ, and if it doesn't, I'll know the first thing to eliiminate next time.

ROOTIN' TOOTIN' YOSEMITE MAC MINI 2011

Yosemite has darn near enough killed off the speed of my Mac Mini 2011 which was running along fine on Mavericks. I now get the spinning PIZZA WHEEL OF DEATH in darn near every application. Safari has become a joke where you would think I had returned to 56k modem land. I would like toknow if Apple geniuses are going to do something about this? I would not have downloaded and instaled Yosemite if I had not been encouraged to do so by Apple's Tech Specs on this page http://www.apple.com/uk/osx/how-to-upgrade/?cid=wwa-uk-kwg-mac-com, which states quite clearly Yosemite will work on:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Any solutions?
Rootin' Tootin' annoyed Mac Mini owner

Problem description:
some what slower program loading and web surfing
EtreCheck version: 2.0.11 (98)
Report generated November 6, 2014 at 9:34:33 AM CST
Hardware Information: ℹ️
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
LG TV spdisplays_720p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 14:46:55
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (252.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Generic USB Storage 7.95 GB
S.M.A.R.T. Status: Verified
NO LABEL (disk1s1) /Volumes/NO LABEL : 7.94 GB (6.30 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Apple Computer, Inc. iSight 200mbit - 400mbit max
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.logitech.iokit.quickcam (1.0.7) Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents: ℹ️
[running] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
iTunesHelper UNKNOWNHidden (missing value)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Amazon Cloud Drive UNKNOWN (missing value)
Internet Plug-ins: ℹ️
iPhotoPhotocast: Version: 7.0 - SDK 10.8
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 7.0 Support
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
     10% WindowServer
      1% loginwindow
      0% fontd
      0% AppleSpell
      0% com.apple.WebKit.WebContent
Top Processes by Memory: ℹ️
137 MB com.apple.WebKit.WebContent
129 MB Safari
120 MB Finder
77 MB spindump
77 MB WindowServer
Virtual Memory Information: ℹ️
3.99 GB Free RAM
2.21 GB Active RAM
1.37 GB Inactive RAM
755 MB Wired RAM
2.31 GB Page-ins
0 B Page-outs

Mac Mini 2011 - Grey Screen in Mountain Lion Installation

I'm having major difficulties with my Mac Mini 2011.
It started with random grey screens appearing forcing me to restart. I restarted and continued working as normal.
Today, I restarted and it jumped directly into the grey screen again in startup.
1.
I booted into recovery mode
-Tried disk utility - repaired and everything seemed fine
-Rebooted and into grey screen again
2.
-Formated partition
-Started new installation and after downloading and 20min remaining, grey screen appears again
Restarted and everything went to grey screen portrayed in the link below:
https://www.box.com/s/yqzizv9g1enob4cdc4yr
I'm stuck.. I believe this should be a clean installation. Why isn't this working?
Can anyone help me please?

If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

Mac Mini 2011 boot camp freezes on loading windows screen.

I bought my mac mini 2011 server, have upgraded it to mountan lion and mountain lion server and wanted to install windows on it. I have microsoft windows 7 professional OEM system builder edition on a dvd, a LG portable super multi blue rewriter, a corded mac keyboard with number pad, a HP mouse, and a hdmi monitor. I have not upgraded any features on the mac, it is original.
I updated all software, well except a printer driver that I don't have the printer of anymore, and ran boot camp. I tried to partition my entire hard drive for it, however that did not work. I then tried to partition half of the first hard drive and that did not work either. I tried unpluging the mouse and keyboard and it still won't work. I bought the copy off of amazon and it appears to be legal. I just always get stuck on the "Windows is loading" screen. The loading bar, a white band across the bottom of the screen, always goes across the whole screen once fast, then makes it's way to the farther left side of the screen and then hangs there indefiniteley.
Any suggestions? more questions about the situation?

Mini mini, there are problems with mini and esp. server version.
What I think others have said: cannot use OS X Server, had to use Mac OS X client
External LG is not supported. Doesn't come with an internal SuperDrive though does it?
The system builder is fine.
Just one story (there are others, I need to collect all the "Mac Mini Tips" together, I can't remember and keep them straight otherwise.
HDMI audio in Windows 7 64 bit
reinstalled the Intel video drivers and audio worked immediately.
My config: 2011 Mac Mini 2.3, Intel 3000HD video
. . upgrade to 8GB ram
Samsung 8000 series LED TV connected with HDMI
Memorex external BluRay writer(USB only power)
After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
When auto updates are off, the Intel video driver that is correct gets installed last.
HDMI audio works with this driver.
Apple should install the Intel video driver first and it would solve this problem.
I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
https://discussions.apple.com/thread/3408749
- There are other stories where Microsoft Windows will automatically install video drivers (iMac) and cause trouble. Sometimes in an innocuous security patches rolled out monthly Tuesday.

Mac Mini (2011) can't boot, no screen display.

Hi, my mac mini (2011) finally won't startup today.
It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
- when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
- after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
- I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
- I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
- I also tried to unplug the memory, try with every single one to boot, no luck
- last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
- during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
- the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
wish you all have a good day.

Hard to troubleshoot when you can't turn on the computer on any more. One option is to bring it to an Apple store to have them look at it. They will tell you what is wrong and how much it will cost to fix. I have never heard of them charging for a diagnostic and an estimate.
If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried. The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it. I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming.

Mac Mini (2011) audio & Bluetooth not working

Similar Messages

Maybe you are looking for