Mac Mini (2011) can't boot, no screen display.

Hi, my mac mini (2011) finally won't startup today.
It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
- when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
- after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
- I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
- I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
- I also tried to unplug the memory, try with every single one to boot, no luck
- last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
- during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
- the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
wish you all have a good day.

Hard to troubleshoot when you can't turn on the computer on any more.  One option is to bring it to an Apple store to have them look at it.  They will tell you what is wrong and how much it will cost to fix.  I have never heard of them charging for a diagnostic and an estimate.
If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried.  The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it.  I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming.

Similar Messages

  • New mac Mini 2011/lion Windows 7 black screen at installation

    Hi,
    I'm switching to Mac and finally got the new mini i5 2.5Ghz and I'm trying to install W7 professional.
    I'm using an external USB dvd r/w unit (a samsung)
    In bootcamp i was able to create the driver disk and repartition the existing hard drive in two halfs of 256GB each
    But when bootcamp assistant restarts the mini in order to boot from the windows installation disc, I just get a black screen and the W7 installer does not boot,
    At that point neither the 32 nor the 64 bit version of W7 boots. The screen simply remains black.
    I can boot from the os x partition (keeping the option key pressed unitl the boot disk selection cames out), and Lion works, but any attempt to boot from the dvdrom with w7 fails.
    Anyone else encountered this issue and can help ?
    Thanks!
    --sav

    Go to http://support.amd.com/us/kbarticles/Pages/Catalyst118DriverPreview.aspx
    and install the ATI 11.8 preview drivers.
    Once installed, open the catalyst Control center (you should have a red icon in the notification tray)
    and in one of the settings there is an "overscan" setting.
    you should see a slider, position it to "0%" and you should have full screen.
    For some reason the overscan defautl setting is set at -15%, hence the black bars.
    I spent quite a lot of time on this, mainly because the bootcamp ATI drivers did not have any setting page I could find. I then installedd the official 11.7 drivers, but I could not get the Catalist Control Center to show up, not sure why.
    Finally after reading forums for hours I gave the 11.8 a try, as it seems thare are some improvements (but mostly performances) for the HD 6xxx graphics cards, then finally it worked and i could access the overscan settings.
    You may want to try first to see if you have the overscan setting before installing any new drivers.
    Hope this helps
    --sav

  • New Mac Mini. Can not boot for the first time.

    Hello Mac to all the mini community. I recently buy a mac mini and it is not able to boot for the first time.
    The only progress is the apple logo, the grey screen and the loading circle.
    I was able to boot in safe mode by holding the power button and plug the power cord and i saw the following message:
    'Unable to find driver for this platform: \ACPS\.\n'0/sourcecache/.....
    debugger called <panic>
    can't perform kext scan: no kext summary
    OSD process name correspondling to current threat: unknown
    MAC OS Version:
    Not yet set
    Kernel Version:
    Orvin Kernetl Version 11.0.1....
    So can you please provide any feedback on how to reslove the issue?
    Thanks in advance

    A new Mac should already have OS X installed on it and boot right up .....?
    Mac Pro & Mac mini Fast Start: The new user's guide to the Mac
    You should be able to open the box, plug in the power cord, your Display, Keyboard and Mouse, push the power button and start using it.
    If not, then you need to return it or exchange it for one that works properly.

  • WiFi slow when running Windows 7 on Mac Mini (2011)

    Hi,
    I have just bought a Mac Mini (2011) and used Boot Camp for installing Windows 7 as well. However I am experiencing some problems with the WiFi when running Windows. The speed is less than 10% of what it should be. I have tried connecting a network cable and then everything is running fine. When booting into OS X Lion there are no problems with running WiFi. I have tried to rightclick on the network adapter and select update drivers but it says that the driver installed is up to date.
    Any ideas?

    Apparently it was a router issue. When I connected my old Cisco router as an extended access point both the Mac OS and Windows session connected as supposed to. I made a factory reset of the router provided by my ISP, configured it again and the problem apparently seemed to be solved.
    However overnight the problem occured again - I swithed the router off and on again and was able to connect. I noticed in the DHCP log that when running Mac OS the computername "My-Mac-Mini" is sent to the router with the MAC address of the network card - when running Windows it is the machine name I entered during the Windows installation. Not sure if that is confusing the router from my ISP but after I changed the computername in Mac OS the connection seems stable.

  • Mac mini 2011 to displayport display

    How do I connect the new Mac mini 2011 (thunderbolt port) to an displayport display?
    What kind of cable do I need?

    Somewhere else I found a hint to use a mini displayport to displayport cable and plug the mini displayport end into the thunderbolt port because of backward compatibility.
    It is my understanding that is correct.
    From the Mac mini page;
    http://www.apple.com/macmini/design.html
    Many ports. Major possibilities.
    Built-in Thunderbolt technology lets you daisy-chain up to six Thunderbolt peripherals, including the new Apple Thunderbolt Display, to a single port. It also supports Mini DisplayPort peripherals you might already have, including the Apple LED Cinema Display. The HDMI port lets you connect Mac mini to your HDTV with a single cable. And a built-in SDXC card slot makes speedy work of transferring photos and videos from your digital cameras.

  • Mac Mini 2011 boot camp freezes on loading windows screen.

    I bought my mac mini 2011 server, have upgraded it to mountan lion and mountain lion server and wanted to install windows on it. I have microsoft windows 7 professional OEM system builder edition on a dvd, a LG portable super multi blue rewriter, a corded mac keyboard with number pad, a HP mouse, and a hdmi monitor. I have not upgraded any features on the mac, it is original.
    I updated all software, well except a printer driver that I don't have the printer of anymore, and ran boot camp. I tried to partition my entire hard drive for it, however that did not work. I then tried to partition half of the first hard drive and that did not work either. I tried unpluging the mouse and keyboard and it still won't work. I bought the copy off of amazon and it appears to be legal. I just always get stuck on the "Windows is loading" screen. The loading bar, a white band across the bottom of the screen, always goes across the whole screen once fast, then makes it's way to the farther left side of the screen and then hangs there indefiniteley.
    Any suggestions? more questions about the situation?

    Mini mini, there are problems with mini and esp. server version.
    What I think others have said: cannot use OS X Server, had to use Mac OS X client
    External LG is not supported. Doesn't come with an internal SuperDrive though does it?
    The system builder is fine.
    Just one story (there are others, I need to collect all the "Mac Mini Tips" together, I can't remember and keep them straight otherwise.
    HDMI audio in Windows 7 64 bit 
    reinstalled the Intel video drivers and audio worked immediately.
    My config:  2011 Mac Mini 2.3, Intel 3000HD video
           .   .       upgrade to 8GB ram
    Samsung 8000 series LED TV connected with HDMI
    Memorex external BluRay writer(USB only power)
    After partitioning drive with boot camp and reboot, install Windows 7 with install wizard.
    When asked whether to allow automatic updates say 'no', then complete installation and run boot camp tools for Windows.
    Because the network driver gets installed prior to the Intel video driver, Windows will install the Windows Update Intel video driver which breaks HDMI audio.
    When auto updates are off, the Intel video driver that is correct gets installed last. 
    HDMI audio works with this driver.
    Apple should install the Intel video driver first and it would solve this problem.
    I now have full blown 3D BluRay support on the MacMini with TruHD audio, fantastic!
    https://discussions.apple.com/thread/3408749
    - There are other stories where Microsoft Windows will automatically install video drivers (iMac) and cause trouble. Sometimes in an innocuous security patches rolled out monthly Tuesday.

  • Mac Mini 2011 - Grey Screen in Mountain Lion Installation

    I'm having major difficulties with my Mac Mini 2011.
    It started with random grey screens appearing forcing me to restart. I restarted and continued working as normal.
    Today, I restarted and it jumped directly into the grey screen again in startup.
    1.
    I booted into recovery mode
    -Tried disk utility - repaired and everything seemed fine
    -Rebooted and into grey screen again
    2.
    -Formated partition
    -Started new installation and after downloading and 20min remaining, grey screen appears again
    Restarted and everything went to grey screen portrayed in the link below:
    https://www.box.com/s/yqzizv9g1enob4cdc4yr
    I'm stuck.. I believe this should be a clean installation. Why isn't this working?
    Can anyone help me please?

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Mac Mini 2011 screen blacks out during heavy screen activity

    I have a Mac Mini 2011 i5 2.3Ghz with Intel HD video.  It's connected to a 30" LCD 2560x1600 (Dell WFP3008) via mini-DP to DP cable and a 22" LCD 1920x1080 (Samsung LCD TV) via HDMI to HDMI cable.
    For the first few weeks I had it connected to the 30" only and it was fine.  Then I hooked up the Samsung as a second display and the problems started.
    The problem is that the Dell blacks out briefly, then comes back.  It is not "drawing" the screen black, the signal to the Dell gets disrupted momentarily so the monitor has no signal so it goes black.  Then it resyncs with the signal and the display is back.  This only happens to the Dell, during the disruption, the Samsung image stays put.  I know it is a signal disruption because the Dell shows a displayport icon showing that it has just resynced to that input.
    The problem happens more frequently when more things are going on; like if I have a window or multiple windows playing video, then the disruption happens more.  If I disconnect the Samsung, it happens less.  It could even happen if a web browser window taking up a large portion of the 30" screen does a full page update, it will disrupt.  If I am running Adobe Lightroom, it seems to happen more also.
    When it happens it seems like messages like this appear in the console, although i can't say they are directly correlated:
    6/1/12 8:28:46.000 PM kernel: IOSurface: buffer allocation size is zero
    I'm thinking perhaps the mini is running low on memory since the 2560x1600 is pretty high res and then add the 1080p screen and stuff being updated, perhaps it runs out of memory and disrupts the signal while it garbage collects?  Pure speculation.
    Has anybody else seen this and have any clues on how to resolve it?  Thanks.

    I should clarify that when I say perhaps the mini is running low on memory, I mean low on shared video memory, since the computer has 16GB installed.  I'm not sure how to view or test shared video memory allocation.

  • On the mac mini 2011 how can I run windows 7 without the optical drive, On the mac mini 2011 how can I run windows 7 without the optical drive

    On the mac mini 2011 how can I run windows 7pm bootcamp without an optical drive.  I watch lots of football on sop cast and other such windows based programmes but can't work out how to do it.

    Actually Windows can be installed and booted from an external drive if the drive is connected eSATA (external SATA), since the drive is treated as if it's an internal HDD. I used the same method previously to dual-boot from 2 different HDD instead of partitioning.
    Most PC motherboards come with them as standard so it's pretty much plug and play but I don't recall seeing a recent Mac with eSATA connectivity though, so that might not be an option for you.

  • Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

    Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
    The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
    For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
    If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

  • Intermittent slow or no boot mac mini 2011

    Hi i have a mac mini 2011 base model, i upgraded the hdd to a crucial m4 128gb rev 0009, the ram from 2gb to 8gb and got a second hdd cable and put the original 500gb as second drive space (after erasing partitions and reformatting via usb). all was working well for a couple of months then all of a sudden it started to take 5+ mins to boot or not at all, just apple logo with spinning gear.
    if i force power off and try again 9/10 it will boot fine second or third time (actually booting in 3-5 gear spins) but i have to do this all the time, it will not boot on first try.
    first i tried resetting the PRAM and SMC no joy.
    then i tried doing a recovery and erased the drive (SSD) and reinstalled Lion, still no joy
    then i went into apple hardware diagnostics no errors repoted, i also did a memtest and hdd test (using remember and smart utility respetivly), also no errors
    then i changed the ram back to the original 2gb still no joy
    additional:
    once the system has managed to boot it works flawlessly and very fast, if at this point i reboot or shutdown and power back on within 2 mins it boots up perfectly fine, if it is left off for more than say 10 mins i have to start the whole process of boot, wait 2-3mins (apple logo and spinning gear) hold power down until off and power back up (will boot after 2-3 times of doing this, then no problems until next time)
    Please can ANYONE help me!!!!!! im at my wits end, im very tech savvy so any technicial answers / suggestions are fine.
    i do hope someone can help!!
    Kirk

    I had a 'spinning beachball' issue with my Crucial M4 2.5" 256GB SSD, and found the following fix to be firmware related.  NOTE: Do NOT update Firmware to the most recent version released 04/2012 (000F).  Make sure to have your SSD backed up prior to update, unless of course you're trying to re-load.
    ========
    The SSD firmware version is stored on the SSD itself so the upgrade does not need to be carried out on the system the SSD will be used in. The easiest way to upgrade the firmware is by connecting the SSD to a system that has a CD drive.
    If this is not possible, you can follow these steps to create a bootable USB flash drive and upgrade the firmware from that.
    1. Connect an empty USB flash drive
    2. Download rEFIt-syslinux from the link below. This will allow your USB drive to be recognized as a startup volume by the Mac.
    http://blog.io101.org/wp-content/uploads/2011/04/rEFIt-Syslinux.dmg_.zip
    3. Mount the dmg. This will mount two volumes called 'rEFIt' and 'SYSLINUX'
    4. Open a Terminal and take a note of which volume is which with the command <diskutil list>
    e.g. /dev/disk1 for the USB drive and /dev/disk2 for the dmg
    5. Unmount (NOT eject) both volumes, after you have confirmed the two new volumes (e.g. disk1 & disk2):
    diskutil unmountDisk /dev/disk1
    diskutil unmountDisk /dev/disk2
    You should get a message saying you were successful
    6. Copy the dmg onto the USB drive:
    dd if=/dev/disk2 of=/dev/disk1 bs=1m
    You should get a message detailing the number of records in and out and number of bytes transferred
    7. Eject both:
    diskutil eject /dev/disk1
    diskutil eject /dev/disk2
    8. Unplug and plug back in the USB drive and mount the SYSLINUX volume
    9. Download the firmware version 0309 for the M4 SSD here:
    http://edge.crucial.com/firmware/m4/0309/Crucialm4_0309.zip
    10. Unzip and mount the firmware ISO and go into the folder BOOT, then ISOLINUX
    11. Copy the contents into the SYSLINUX volume
    12. Delete the existing file syslinux.cfg and rename ISOLINUX.CFG to syslinux.cfg
    13. Reboot your mac and hold the option key to select a boot volume and select the eEFIt volume, then choose the "Boot legacy OS SYSLINUX' option
    14. Follow the instructions to update the firmware.

  • [SOS]Which mac mini device can install dual boot(Lion and Mt Lion)?

    Salutations!
    Due to my assignment, I need to get mac mini device which support dual boot.
    Which mac mini device model/firmware can we install dual boot(Lion and Mt Lion) on it?
    I got late 2012 one, but it looks like it does not support.
    Please help me.
    Thank you so much,
    TriQuang

    Hi Niel,
    Thank you for your fast reply. So if I buy mac mini MC815 model, which comes with preinstalled Lion I can run dual boot(Lion and Mt Lion)?
    I have one more question: Can I install Mac OS 10.6 on that mini device? If it's not supported which mac mini model can I get to support Snow Leopard and Lion and Mt Lion?
    Thanks and best regards,
    TriQuang

  • Unable to Troubleshoot Power Issues on Mac mini 2011

    I have been having odd and intermittent power issues with my Mac mini 2011 and could really use some help before I resign myself to taking it into an Apple Store. It's under warranty, but I now live in another country so I hope I don't need to ship it should it come down to that.
    However, I have searched this topic a lot, and not only have I tried troubleshooting it, I haven't seen any power issues with other owners of this model. That leads me to think that the power supply itself is probably OK.
    First of all, I live in China and the building I live in seems to have a questionable power supply. The air conditioner for example simply would not work and the repairman spent two hours messing around with wires inside the outlet and in the breakers. That did the trick, so I wonder if I'm simply not getting enough juice?
    Main symptoms:
    - My monitor recognizes an analog signal but will not light up (black monitor). Unplugging and replugging adaptor doesn't do anything.
    - Startup Keyboard Commands (e.g. Cmmd-R) may work, but I can't tell because the monitor won't light up. Letting the computer boot up though I can hear keyboard volume keys and such making the standard sounds. I can usually restart using the keyboard too.
    - My 2T external HD more often than not dismounts as well.
    - I can't hear any computer activity after the chime (hard drive, etc.).
    - Since I can hear the chime and there is audio feedback through the keyboard, I think that eliminates hardware problems such as logic board failure or bad RAM.
    - I can't boot even if I unplug all USB peripherals.
    - Holding down the power button (I have it set to make the computer sleep as well as shut down) often won't shut down the computer, but it seems to stay in sleep no matter how long I hold it. Unplugging the computer finally shuts it down, obviously.
    - Unplugging and waiting 5 minutes or so and powering up again doesn't seem to make any difference, nor does switching sockets, plugging directly into the wall, etc.
    Problems began about two weeks ago, got better, and then worse again. Now I'm just keeping the computer and monitor on (never sleep 24/7).
    Miraculously, after much frustration and countless restarts, suddenly the screen will turn on to reveal a fully booted system that was running all along in the background. No startup screen- the monitor just magically comes on again. Often I find that my external has unmounted, but it's no big deal to get to remount. At this stage, the Mac is still very quiet and for a while the system is sluggish, though it hops back into action in 5 or 10 minutes.
    At first I thought it was just my monitor, and though that's possible I suppose, it seems I'm just not getting enough juice. Once the monitor is on though, everything is fine: I can power it off and on with no problems. But I can't just leave my computer on forever though.
    Any help appreciated.

    Well, with the other monitor (which did not work with the mini either but worked fine on a laptop), I was able to narrow the trouble spot down to either a faulty Mini Display to VGA adaptor or a damaged port. I could determine that all the other ports (incld. the USB drive, programs, internet, etc., were all working fine behind the big black GUI all through sound feedback, so I seriously doubted it could be a supply problem or a residential electric problem.
    I took my mini and adaptor to a "Mac Shop" (reseller) here in China, and found it quite professional, just like a Mac Store. They tested my machine, and although they didn't have VGA monitors, they said I could return the new $30 USD adaptor if it didn't work. But as I'm writing this on the monitor now, the new adaptor did the trick.
    The long and short of all this is that I've read a lot about display problems with the mini and I suspect that most of these problems are adaptor related. I myself tried to save some bucks by buying a third party plug and lived and learned. I hope the Apple adaptor works like a champ, and if it doesn't, I'll know the first thing to eliiminate next time.

  • Mac Mini server won't boot after logoff, any suggestions?

    My mac Mini Server will not boot after administrator logoff, I get a gray screen with the spinning progress wheel, but nothing happens.  Any suggestions?

    Can you boot into single user mode? If so, run fsck and post the results.

  • Windows 7 on Mac Mini 2011

    I am trying to install windows 7 on m mac mini 2011 but the drivers for network, wireless etc. do not work. there is no cd included with the box. does anyone know where i can find the correct drivers. i have installed windows 7 professional 32 bit.

    Boot Camp - Installation & Setup Guide (OS X Lion)
    Frequently asked questions about Lion and Boot Camp 4.0
    The BootCamp Drivers have to be downloaded from inside the BootCamp Assistant (called "Windows Support Software").
    Stefan

Maybe you are looking for