Mac mini 2011 how do i restore with out a disc

i would like to restart my man mini so i can make it not have a password for everything can anyone help as im very new to mac only had it not even a week and sick of the password thing already

OS X Lion or OS X Mountain Lion includes a built in set of utilities in the Recovery System. Restart your Mac and hold down the Command key and the R key (Command-R), and keep holding them until the Apple icon appears, indicating that your Mac is starting up. After the Recovery System is finished starting up, you should see a desktop with a OS X menu bar and a "Mac OS X Utilities" application window. Note: If you see a login window or your own desktop and icons, it is possible that you didn't hold Command-R early enough. Restart and try again.
I do not believe that this will help your password issue but this is how you do a restore without a disc.

Similar Messages

On the mac mini 2011 how can I run windows 7 without the optical drive, On the mac mini 2011 how can I run windows 7 without the optical drive

On the mac mini 2011 how can I run windows 7pm bootcamp without an optical drive. I watch lots of football on sop cast and other such windows based programmes but can't work out how to do it.

Actually Windows can be installed and booted from an external drive if the drive is connected eSATA (external SATA), since the drive is treated as if it's an internal HDD. I used the same method previously to dual-boot from 2 different HDD instead of partitioning.
Most PC motherboards come with them as standard so it's pretty much plug and play but I don't recall seeing a recent Mac with eSATA connectivity though, so that might not be an option for you.

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via minidisplay port. Anybody knows how to fix this?

When I connect my Mac Mini 2011 with Lion to a TV via HDMI and an earphone cable is plugged in, it´s not possible to choose sound out via hdmi, as opposed to connection via the minidisplay port. Anybody knows how to fix this?

Was just on the phone with Apple about this.
The solution was as follows for me anyway...
Go to your Finder
Choose the Go Menu
Choose Computer
Choose your Macintosh Hard Drive
Choose your "Library" Folder
Choose the "Preferences" Folder
There should be a folder called "Audio"
Move that whole folder to the trash
Empty the Trash
Restart from the Apple Menu
When you are back up and running;
     Choose System Preferences from the Apple Menu
     Choose Sound
      In the output tab you should now be able to make the HDMI "Sticky"
      Enjoy your sound over HDMI and no more dirty knees or broken backs unplugging the desktop speakers!
Mac Mini 2011 2.5Ghz 8 GB of RAM - Planar 17" VGA via display port adapter and Samsung 26" LCD TV via HDMI

How to create bootable USB thumb drive from Lion on Mac Mini 2011?

Hello folks
Yesterday my new Mac Mini (Core i7 2,7 Ghz, 4 GB RAM, ATI Radeon HD6630M 256 MB) arrived. It replaces my old Mac Mini (Core Duo 1,83 Ghz, 2 GB RAM, Intel GMA950 64 MB). One day I'll replace the 500 GB 5400 RPM HDD in this Mini by an Intel SSD drive (just like I did with my previous Mini). I'll do a fully clean install then (formatting the SSD drive in Disk Utility and then installing Lion on it from a bootable USB thumb drive). The only problem is I can't seem to download Lion for free from the Mac AppStore (MAS) although I have bought a new Mac Mini which came with Lion pre-installed. I know how to create a bootable USB thumb drive with Lion on it when you download it from the MAS. But that's the problem... I can't seem to download Lion from the MAS for free. When I open the MAS while holding down the Option key I can download Lion but it will charge me for it. Is there any way I can download Lion from the MAS without paying for it? Since it already came with my new Mac Mini 2011 this should be possible I guess?
And will I still be able to download the iLife '11 apps (iPhoto, iMovie and Garageband) for FREE that came with my new Mac Mini when I do a fully clean install as described above? Thanks in advance.
Greetings
Jocau

After doing some research, it seems that there are only 2 WAYS to do a complete reinstall of Lion on the Mac Mini 2011 without paying for the Lion download in the Mac AppStore (i.e. recreating every partition, also the Recovery HD partition, from scratch e.g. when installing Lion on a clean HDD/SSD).
1) COMPLETELY clone the Mac Mini 2011 HDD including all of its partitions to an external drive and restore it when you want to do a complete reinstall.
2) Use the LION INTERNET RECOVERY feature built-in into new Macs that ship with Lion (this feature is present in new Macs starting from the Mac Mini 2011 and Macbook Air 2011).
OS X Lion: About Lion Recovery
Lion Internet Recovery
If you happen to encounter a situation in which you cannot start from the Recovery HD, such as your hard drive stopped responding or you installed a new hard drive without Mac OS X installed, new Mac models introduced after public availability of OS X Lion automatically use the Lion Internet Recovery feature if the Recovery HD (Command-R method above) doesn't work. Lion Internet Recovery lets you start your Mac directly from Apple's Servers. The system runs a quick test of your memory and hard drive to ensure there are no hardware issues.
Lion Internet Recovery presents a limited interface at first, with only the ability to select your preferred Wi-Fi network and, if needed, enter the WPA passphrase. Next, Lion Internet Recovery will download and start from a Recovery HD image. From there, you are offered all the same utilities and functions described above.
As with the Recovery HD, reinstallation of OS X Lion from Lion Internet Recovery requires an Internet connection. See "Supported network configurations and protocols" below.
Restoring iLife applications after Internet Restore of OS X Lion
If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
After installation, start from Lion.
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.
Source: Lion Recovery
It's a bit sad that these seem to be the only 2 options. Lion Internet Recovery is the preferred one here since my monthly internet traffic limit isn't a problem (but my download speed is). This problem could have been easily solved by Apple by just checking the system specs or serial number when trying to download Lion from the Mac AppStore. By using one of the 2 options in my previous sentence the Mac AppStore could see that I have a new Mac Mini 2011 that ships with Lion which would give me the option to download Lion from the Mac AppStore for free and eventually create a bootable USB thumb drive of it.

How do I downgrade mountain lion back to my mac mini 2011 lion server

Hi,
Previously, my mac mini mid 2011 was installed with mac os lion server then I have purchase and upgrade to mountain lion via iTunes.
Somehow I decided to downgrade back to lion server due to use of my mac as server, unfortunately I have no idea how to downgrade with the following reasons:
1. I don't create any time machine backup before so can't use that option.
2. I have enable vault function so now the startup has hide the recovery HD icon
3. In the Recovery mode (command + R), I only see an option to download and reinstall a fresh Mountain Lion only.
4. I can't download and install Lion server from iTunes because this os was bundle with purchase of mac mini 2011 mid version.
Any comments and helps here are appreciated. Thanks.

Well, did you save a Carbon Copy Clone (http://www.bombich.com) of the Lion installation by chance? That would be the easiest to go back to and use / update. Outside of that, or having saved the original Lion installer, I know of no way to get the OS that you are after. For future referece, on a mac mini with two harddrives, I have always made a backup partition on the second drive using CCC, and schedule clone updates to that. You can't rely on TM, inmo, so something like CCC or SuperDuper is essential. Cheers,
jigs

External iSight - no sound with Mac mini 2011

Hello,
I'm trying to connect External iSight camera to Mac mini 2011 (using FW400 -> FW800 adapter cable) but I can't get microphone sound to work...
When I open system prefs>sound>input, it shows iSight is connected but system will freeze for a while (like it's looking for iSight) on openning.
When I try open Skype video preferences, it shows me video from iSight with no problem, but sound doesn't work.
Can anyone give me some advice?

You're welcome.
(1) Your new info indicates to me that there is probably something wrong with your cable(s), adapter(s), Mac mini's Firewire, or your external iSight itself.
You can eliminate most of these by troubleshooting with other cables, adapters, Firewire devices, and Macs as suggested in the info from my earlier link.
If no Firewire device you test on your Mac works with any connecting cable, resetting the Mac's Firewire bus may help. Apple's "how-to" article has been archived in this link. (This link may be slow to load.)
If you have trouble displaying the archive page, here is the pertinent extract on how to reset the bus:
... If the issue persists, try these steps:
Shut down the computer.
Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
If an individual third-party device leads to the issue, contact the manufacturer for more information and further assistance.
NOTE: Some users who try FW reset forget that "all" cables include the power cable. Disconnecting power is important.
(2) If your troubleshooting shows that your external iSight itself is the problem, you can decide whether you want to have your old serviced. If you do not have access to a local Apple-Authorized Service Provider, you can obtain cost and Apple contact info from http://www.apple.com/support/isight/service/
(3) Rather than spend more money on your old iSight, you may decide to consider a new webcam. A new Mac compatible USB connected cam with a current warranty will be a faster fix, and it may be lower cost. Some examples are at http://mac-compatible-web-cam.com. Moreover, compatible USB connected cams are not subject to all the same conflicts that sometimes effect external iSight.
Unless you already have a separate microphone for your mini, you can decide whether to buy separate mic or look for a new camera that has an inbuilt mic.
Message was edited by: EZ Jim
Mac OSX 10.8.3

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Can I install Windows XP SP1 with Bootcamp on my new Mac Mini 2011 i7 ?

Baiscally if your Mini came with Lion Pre-installed new then No you can't use XP.
The Lion installed computers no longer support XP OR Vista via Apple's Boot Camp.
For one thing Apple only supported XP with SP2 in order to install it on pre Lion computers.
If the Mini had come pre-installed new with say 10.6 then you could have installed XP and still of been able to upgrade to Lion without any issues as you already have the drivers for XP installed. Lion only has the drivers for W7.

Opinions about if Mac Mini 2011 works ok with VGA monitors

Hi Community,
I have a old HP PC, I want to buy my first Mac Mini and used the keyboard, mouse and VGA monitor (Mod. HP Pavillion mx50) that I have.
Before I purchase the new Mac Mini 2011 and Mini DisplayPort to VGA Adapter, I would like to know if it works ok with my old components, specially with the VGA monitor? I've read on this Community there some persons have monitors problems.
I don't want spend my money and then have problems with the Mac Mini.
Thanks in advance,

MiniDisplayPort-VGA adapters. Available in the online store, at Apple stores, or at BestBuy/MicroCenter/Fry's. Plugs into the Thunderbolt port.
Usually works without issue. But then I use monitors made by LG and Samsung. Others use lesser known brands or models know to have quirks and encounter issues.
Some things to watch for:
Soem adapters have too much plastic coveing the "connection plate", and the cable cannot seat fully. If you just look at one that has too much plastic, you will know what I am talking about.
VGA signals from Macmini are not strong enough to get through mutliple adpaters. If you want a VGA signal, buy 1 VGA adapter. If you want a DVI signal, buy only 1 DVI adapter. Do not get a DVI adaper, than add a mid-line converted to change the DVI adapter to a VGA port.
If you plan to run Windows under BootCamp, the Windows driver for the Tunderbolt port does NOT output snalog (VGA), just digital (DVI, HDMI). So if you plan to use VGA to display Windows output, run Windws under "VM software" (Parallels or VM Fusion) so that OSX can make the VGA signal for you.

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!?

I have just bought a 2011 iMac (2.5 ghz, 4gb) and logic express 9, and when i installed logic and tried to run it i had a message saying 'you can't use this version of the application logic express with this version of Mac OS X. How do i sort this out!? It is very frustrating as the main reason i have bought a mac is to use logic! Any help would be great as i am a complete novice when it comes to Macs!

You're probably on OS X Lion?
I had the same problem as you. I used Software Update to update Logic Express to the latest version, and then it ran without any problems.

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). How do I fix it?

My Mac Mini will charge - but not sync with - USB-connected devices (ipod, camera, memory card reader). I have tried unplugging the devices, restarting the computer, selectively unplugging and plugging in the devices, closing and opening the relevant applications (iTunes, iPhoto, etc). I have tried using different USB cables.
It's like all of a sudden the synching service stopped functioning or recognizing these devices for some reason. The other ports work just fine (monitor).
The only USB-connected external device that appears to be unaffected is the USB SuperDrive and it works on all the USB ports into which I plug it.
How do I fix this?

Open Console in Applications>Utilities & see if there are any clues or repeating messages when this happens or doesn't happen.

Mac mini 2011 with samsung UA32D5000PM

I purchased a mac mini 2011 recently and hooked it up to my samsung UA32D5000PM with HDMI cable. I am getting terrible image quality setting the display to 1080p. This is very frustraing, someone pls help!

I managed to solve in my Samsung LED TV 40 -
I clicked on the Source button on my TV remote control. Then click on Tools on the HDMI port on which the mac mini is connected.
Then select Edit Name. not type the name, chosen from the list option DVI PC and it was amazing, it worked fine for me, so I have to improve the contrast now.

Does HP W2207h monitor with Mac mini 2011?

I have a HP W2207h monitor with HDMI and VGA ports, will this work with the new Mac Mini 2011?

You can use HDMI cable with HP w2207h directly,No need for other cable. but please follow these step.
1.Find LCD tv to set up first step.
2.Connect HDMI cable to LCD TV(i use Samsung) and adjust to HDMI source.
3.Open Mac mini.
4.Open system preference.
5.Click "display" you will see that the primary setting is :1680*1050 that HP monitor did not support.
6.Unplug HDMI cable from LCDtv (no need to shut down) and plug into HP w2207h.
7.the screen still blinking, it is ok.
8.On HP monitor, Push down button "Select" and "+" and the same time and hold it.
9.Use mouse or down button on keyboard to choose screen resolution to be "1600*900"
10. Then the screen will not blinking and you can use your lovely HP w2207h
if you want a high resolution on screen.
1.Buy new LED monitor that support 1680*1050 resolution.
2.Buy Mini displayport to DVI for digital signal Mini>DVI>HDMI.
Enjoy your MAC. because i am new Mac user with my MAC mini 2011
[email protected]

Mac mini 2011 how do i restore with out a disc

Similar Messages

Maybe you are looking for