Mac mini 2011 in itunes video podcasts wont start. all systems updated.

I can play audio podcasts fine, video podcasts wont play. After clicking on to start with, the podcast does nothing, just hangs. All operating system, quick time, itunes are up to date.

Hi Amiel,
Take a look at the article linked below, it provides a lot of great information and troubleshooting tips that can help you resolve the Home Sharing issue with your Mac mini.
Troubleshooting Home Sharing - Apple Support
Take care,
-Jason

Similar Messages

ITunes video podcast wont download

Using the latest iTunes on WIn 7 and have three video podcasts which appear to download but when they complete they haven't downloaded and appear greyed out with an open circle on the left. Can anyone help please?

Yes, the file isn't where it's supposed to be, therefore it cannot be downloaded onto your computer.
This is a problem with the Podcast. Each episode is held on a server, the Podcast producers specify where the file is, and all iTunes does is list it according to the information supplied by the producer. (Neither Apple nor iTunes store the Podcast, they simply list it.) When you ask for it (either manually or via a subscription) iTunes asks the host server to download a copy to you. However, if the file is not actually stored where the Podcast's producers say they've put it, you get that message.
I suggest you contact the show's producers to let them know there is a problem. On the iTunes Store page for the Gadget Lab, you should see a link to "Website." Follow that and send them an email.
I've had this happen with Podcasts I'm subscribed to. Usually, all it needs is an email from someone to let them know, they correct the fault and hey presto, done!

Mac Mini (OSX 10.5.8) won't start all the way

I try to turn on my Mac Mini, and it only goes to the apple logo, and the spinning wheel thing. Then it just shuts off again. I turn it on again, it shuts off. I've tried unplugging it, leaving it for a while, holding the power button for an extended time, nothing works. Help please.

If you have an Intel-based mini, have you reset the SMC?
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
This can sometimes address unexpected shutoffs.

HT3281 Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why ? I am in contact with Itunes now and they wanted screensh

Podcasts from Current Tv, since three weeks prior to the Nov 2012 election have had a url problem and cannot be played on my mac mini 2011 with 10.8.2 and the latest Itunes? anyone know why> ? I am in contact with Itunes now and they wanted screenshots of the problem, I can get these current tv episodes with a vpn and my isp says they are not blocking them, but i was surprised that prior to the election they were blocked, ?
I also can get them on my Android Samsung Galaxy note 2 with no problem but on the Macmini cannot>/? I Unsubscribed and subscribed many times but still no luck, any ideas? I am waiting for the senior advisor to get back to me on this issue. I am in THailand now where the problem is happening and as I said the ISP says they do not block any podcasts.I also do not want it on my iphone 5, so I have to wait and see why the mac mini is not getting it.

I seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?

Flash player always using software video decoding in Mac Mini 2011 w/HD6630M

Hello,
I have Mac Mini 2011 model with AMD Radeon HD6630M graphics.
Everything works perfectly on my system..games, videos in VLC,Quicktime..
Only problem is flash videos on youtube are always using software video decoding but using accelerated video rendering
Even in full screen or window mode its always the same!
I've tried all browsers..Opera, FireFox, Chrome, Safari..all have the same issue!
Even re-installed OS X Mavericks. Same Result!
I've used flash 11.9 & the Beta 12.xx as well..ran the flash uninstaller..nothing it just says the same!
I've checked the Hardware acceleration box & everything. Nothing seems to work!!
Seems to be an issue in Flash player with AMD graphics cards on OSX??
Please FIX!
What else am I supposed to do?? Please FIX your app!

Well i have about 30 days left before the return period is up for the Marantz. I just did a complete restore of my mac mini just about an hour ago. I havent noticed the problem yet but I've only been using it for an hour or so.
I suppose using it without my Marantz would be a good idea. If i see the screen flash out again now, i'll try just connecting to the tv and painfully suffer through the audio on my tv speakers. lol

Mac Mini 2011 wont stay online

Mac Mini 2011 wont stay online via ethernet nor wireless, all other apple products are connecting fine

Take each of the following steps that you haven't already tried, until the problem is resolved.
Step 1
Restart the router. Many problems are solved that way.
Step 2
Change the name of the wireless network, if applicable, to eliminate any characters other than letters and digits. You do that on your router via its web page, if it's not an Apple device, or via AirPort Utility, if it is an Apple device.
Step 3
Run the Network Diagnostics assistant.
Step 4
Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Enter the name of your wireless network in the search box. You should have one or more "AirPort network password" items with that name. Make a note of the name and password, then delete all the items. Quit Keychain Access. Turn Wi-Fi off and then back on. Reconnect to the network.
Step 5
You may need to change other settings on the router. See the guidelines linked below:
Recommended settings for Wi-Fi routers and access points
Potential sources of interference
Step 6
Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
Step 7
Reset the System Management Controller (SMC).

Mac Mini 2011 Fan is Noisy During Streaming Video

Mac mini 2011 2.3 GZ. When I watch Youtube streaming video fullscreen or video chat with someone on Skype, the fan kicks into high gear and gets really noisy. Fan gets to about 5200 rpm and CPU up to 75C. I don't get the heat or fan noise during avi/Quicktime/VLC playback, or an Skype, audio alone. I don't recall this on my 2009 Mac Mini. Is this normal?
Only variable is an 8 gigabyte RAM upgrade.

It's possible that hardware accelleration is not
enable for Adobe Flash. Right click on the You
Tube window and check the Flash Player settings.

ROOTIN' TOOTIN' YOSEMITE MAC MINI 2011

Yosemite has darn near enough killed off the speed of my Mac Mini 2011 which was running along fine on Mavericks. I now get the spinning PIZZA WHEEL OF DEATH in darn near every application. Safari has become a joke where you would think I had returned to 56k modem land. I would like toknow if Apple geniuses are going to do something about this? I would not have downloaded and instaled Yosemite if I had not been encouraged to do so by Apple's Tech Specs on this page http://www.apple.com/uk/osx/how-to-upgrade/?cid=wwa-uk-kwg-mac-com, which states quite clearly Yosemite will work on:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminium, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
Any solutions?
Rootin' Tootin' annoyed Mac Mini owner

Problem description:
some what slower program loading and web surfing
EtreCheck version: 2.0.11 (98)
Report generated November 6, 2014 at 9:34:33 AM CST
Hardware Information: ℹ️
Mac mini (Mid 2010) (Verified)
Mac mini - model: Macmini4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
LG TV spdisplays_720p
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 14:46:55
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (252.73 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Generic USB Storage 7.95 GB
S.M.A.R.T. Status: Verified
NO LABEL (disk1s1) /Volumes/NO LABEL : 7.94 GB (6.30 GB free)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Firewire Information: ℹ️
Apple Computer, Inc. iSight 200mbit - 400mbit max
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.logitech.iokit.quickcam (1.0.7) Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents: ℹ️
[running] com.amazon.cloud-player.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
iTunesHelper UNKNOWNHidden (missing value)
SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Amazon Cloud Drive UNKNOWN (missing value)
Internet Plug-ins: ℹ️
iPhotoPhotocast: Version: 7.0 - SDK 10.8
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.1 Support
QuickTime Plugin: Version: 7.7.3
Google Earth Web Plug-in: Version: 7.0 Support
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
     10% WindowServer
      1% loginwindow
      0% fontd
      0% AppleSpell
      0% com.apple.WebKit.WebContent
Top Processes by Memory: ℹ️
137 MB com.apple.WebKit.WebContent
129 MB Safari
120 MB Finder
77 MB spindump
77 MB WindowServer
Virtual Memory Information: ℹ️
3.99 GB Free RAM
2.21 GB Active RAM
1.37 GB Inactive RAM
755 MB Wired RAM
2.31 GB Page-ins
0 B Page-outs

Mac Mini (2011) can't boot, no screen display.

Hi, my mac mini (2011) finally won't startup today.
It was since two weeks ago, the mini goes freeze very frequently, I discovered that the fan speed was always below 2000rpm, meantime, the CPU temp was around 80-90 degree, it is around 25 degree in the room, last Friday I installed a software named smcfancontrol, which can manually speed up the fan, and it seems better, and the computer runs faster, I think the CPU is running in full speed.
Today, I opened a video to watch, after about ten minutes, the computer goes freeze again, and of course I force powered it down by pressing the power button on the back, then the tragic came:
- when I try to boot up the machine, the front light turns on, then off with a "ka" sounds like the hard drive shutting down(force powering it down)
- after around two seconds, the light goes on again, and the fan smoothly goes to full speed, there is nothing shows up on screen, as well as no apple boot up sound.
- I tried to reset smc (power down, unplug power cable, wait 15 seconds, plug in power cable, wait 5 seconds, power on), no luck.
- I tried to reset pmu (at least internet says it's pmu, it seems apple website did not mention how to reset pmu on mac mini, power down, hold power button for five seconds, power on), no luck
- I also tried to unplug the memory, try with every single one to boot, no luck
- last Friday, when I can still boot up the computer, I thought there might too much dust, I removed the fan and cleaned it up, it looks a small piece of plastic on the fan plug were damaged, but the smcfancontrol app still can control its speed, therefore I think the fan is OK.
- during many retry, there was one time, the fan goes full speed at startup, with no front light off,(my current status is fan goes to full speed gently).
- the computer is connected with an AV amplifier, then output to a plasma TV, when the computer is powered off, the TV displays a background of amp, when I startup the computer, although no video output from computer, the TV goes to a "No Signal" status, I dont's think this is related to my problem.
the computer is out of warrentee, but bought only for less than two years... I really want it back to work, can someone help me? many thanks!
wish you all have a good day.

Hard to troubleshoot when you can't turn on the computer on any more. One option is to bring it to an Apple store to have them look at it. They will tell you what is wrong and how much it will cost to fix. I have never heard of them charging for a diagnostic and an estimate.
If your CPU was running hot all the time and your fan had small plastic pieaces, in my opinion, something got fried. The mini is so compact, that the excessive heat may have also over heated your hard drive causing thd "ka" sound.
If you decide to continue in to use a Mac Mini as a media server, may I would suggest using iStat to monitor it. I use iStat on my 2011 Mac Mini Media Server to monitor CPU usage, all sensors, and internet incoming and outcoming.

How do I downgrade mountain lion back to my mac mini 2011 lion server

Hi,
Previously, my mac mini mid 2011 was installed with mac os lion server then I have purchase and upgrade to mountain lion via iTunes.
Somehow I decided to downgrade back to lion server due to use of my mac as server, unfortunately I have no idea how to downgrade with the following reasons:
1. I don't create any time machine backup before so can't use that option.
2. I have enable vault function so now the startup has hide the recovery HD icon
3. In the Recovery mode (command + R), I only see an option to download and reinstall a fresh Mountain Lion only.
4. I can't download and install Lion server from iTunes because this os was bundle with purchase of mac mini 2011 mid version.
Any comments and helps here are appreciated. Thanks.

Well, did you save a Carbon Copy Clone (http://www.bombich.com) of the Lion installation by chance? That would be the easiest to go back to and use / update. Outside of that, or having saved the original Lion installer, I know of no way to get the OS that you are after. For future referece, on a mac mini with two harddrives, I have always made a backup partition on the second drive using CCC, and schedule clone updates to that. You can't rely on TM, inmo, so something like CCC or SuperDuper is essential. Cheers,
jigs

Mac Mini 2011 screen blacks out during heavy screen activity

I have a Mac Mini 2011 i5 2.3Ghz with Intel HD video. It's connected to a 30" LCD 2560x1600 (Dell WFP3008) via mini-DP to DP cable and a 22" LCD 1920x1080 (Samsung LCD TV) via HDMI to HDMI cable.
For the first few weeks I had it connected to the 30" only and it was fine. Then I hooked up the Samsung as a second display and the problems started.
The problem is that the Dell blacks out briefly, then comes back. It is not "drawing" the screen black, the signal to the Dell gets disrupted momentarily so the monitor has no signal so it goes black. Then it resyncs with the signal and the display is back. This only happens to the Dell, during the disruption, the Samsung image stays put. I know it is a signal disruption because the Dell shows a displayport icon showing that it has just resynced to that input.
The problem happens more frequently when more things are going on; like if I have a window or multiple windows playing video, then the disruption happens more. If I disconnect the Samsung, it happens less. It could even happen if a web browser window taking up a large portion of the 30" screen does a full page update, it will disrupt. If I am running Adobe Lightroom, it seems to happen more also.
When it happens it seems like messages like this appear in the console, although i can't say they are directly correlated:
6/1/12 8:28:46.000 PM kernel: IOSurface: buffer allocation size is zero
I'm thinking perhaps the mini is running low on memory since the 2560x1600 is pretty high res and then add the 1080p screen and stuff being updated, perhaps it runs out of memory and disrupts the signal while it garbage collects? Pure speculation.
Has anybody else seen this and have any clues on how to resolve it? Thanks.

I should clarify that when I say perhaps the mini is running low on memory, I mean low on shared video memory, since the computer has 16GB installed. I'm not sure how to view or test shared video memory allocation.

Is it possible to connect an external blue ray drive via USB with a mac mini to watch HD videos?

Is it possible to connect an external blue ray drive to a mac mini to watch HD videos? Iy yes, what additional software / hardware is necessary?

Saul in PA wrote:
There is some new software that allows playing:
http://www.macworld.com/article/160977/2011/07/blu_ray_movie_playback_comes_to_t he_mac.html
Did you even read the article you linked to?
Here's a quote from it
"The video itself looked fine when it played properly, but it stopped and started constantly, and often displayed with huge, ugly artifacts. And at times, the app would freeze completely and require a force quit.
Just to make sure it wasn’t a problem with one Blu-ray disc, I tried some others. With Hot Tub Time Machine the results were much, much worse. It got a few seconds into the United Artists logo before the movie and completely froze playback. On several attempts. With David Cronenberg’s The Fly, playback was generally better—but the software played the ‘making of’ movie instead of the actual film. I thought there might have been a preference to help with the movie selection, but—wait for it—the Preferences item didn’t do anything when I selected it."
Not very promising is it

Mac mini 2011 to displayport display

How do I connect the new Mac mini 2011 (thunderbolt port) to an displayport display?
What kind of cable do I need?

Somewhere else I found a hint to use a mini displayport to displayport cable and plug the mini displayport end into the thunderbolt port because of backward compatibility.
It is my understanding that is correct.
From the Mac mini page;
http://www.apple.com/macmini/design.html
Many ports. Major possibilities.
Built-in Thunderbolt technology lets you daisy-chain up to six Thunderbolt peripherals, including the new Apple Thunderbolt Display, to a single port. It also supports Mini DisplayPort peripherals you might already have, including the Apple LED Cinema Display. The HDMI port lets you connect Mac mini to your HDTV with a single cable. And a built-in SDXC card slot makes speedy work of transferring photos and videos from your digital cameras.

Mac Mini 2011 - Monitor Problems - Help

My picture is not sharp... just blury. Icons, pictures, text, mostly everything is bad except high quality video files.
I just purchased a Mac Mini 2011 second option and a Samsung TA531 monitor that arrived today. Hooked it up and to my surprise, it is blury and bad quality no matter what kind of resolution i use. I also try to text smoothening through terminal.. nothing helps.
My setup:
Mac Mini 2011 - second option stock
Samsung SyncMaster T27A531
Cable: HDMI
After reading about this issue, some people recommends to use a DVI or VGA cable and claims that HDMI is not suitable for computer monitors, especially Samsung.
Please, feel really sad and lost among a lot of new computer equipment that doesn't work properly

I had the same issue and didn't want to give up my Thunderbolt port, so I opted to get a Gefen HDMI Detective Plus. What this does is make the CPU think an HDMI display is attached so that your graphics CPU 'unlocks' and full speed is back. The Gefen box can either 'learn' the code of any HDMI display in your office/home, or you can preset it as a stock 1080p display. TOTALLY solved my problem... even though it did cost $85.
Apple needs to fix this as so many people use the MINI headless.
http://www.gefen.com/kvm/ext-hdmi-edidp.jsp?prod_id=8005

External iSight - no sound with Mac mini 2011

Hello,
I'm trying to connect External iSight camera to Mac mini 2011 (using FW400 -> FW800 adapter cable) but I can't get microphone sound to work...
When I open system prefs>sound>input, it shows iSight is connected but system will freeze for a while (like it's looking for iSight) on openning.
When I try open Skype video preferences, it shows me video from iSight with no problem, but sound doesn't work.
Can anyone give me some advice?

You're welcome.
(1) Your new info indicates to me that there is probably something wrong with your cable(s), adapter(s), Mac mini's Firewire, or your external iSight itself.
You can eliminate most of these by troubleshooting with other cables, adapters, Firewire devices, and Macs as suggested in the info from my earlier link.
If no Firewire device you test on your Mac works with any connecting cable, resetting the Mac's Firewire bus may help. Apple's "how-to" article has been archived in this link. (This link may be slow to load.)
If you have trouble displaying the archive page, here is the pertinent extract on how to reset the bus:
... If the issue persists, try these steps:
Shut down the computer.
Disconnect all devices and all other cables, except the keyboard and mouse cable(s).
Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
Plug the computer back in and turn it on.
Reconnect the device(s) (one at a time if there is more than one) and test. Test with each port if you have more than one.
If an individual third-party device leads to the issue, contact the manufacturer for more information and further assistance.
NOTE: Some users who try FW reset forget that "all" cables include the power cable. Disconnecting power is important.
(2) If your troubleshooting shows that your external iSight itself is the problem, you can decide whether you want to have your old serviced. If you do not have access to a local Apple-Authorized Service Provider, you can obtain cost and Apple contact info from http://www.apple.com/support/isight/service/
(3) Rather than spend more money on your old iSight, you may decide to consider a new webcam. A new Mac compatible USB connected cam with a current warranty will be a faster fix, and it may be lower cost. Some examples are at http://mac-compatible-web-cam.com. Moreover, compatible USB connected cams are not subject to all the same conflicts that sometimes effect external iSight.
Unless you already have a separate microphone for your mini, you can decide whether to buy separate mic or look for a new camera that has an inbuilt mic.
Message was edited by: EZ Jim
Mac OSX 10.8.3

Mac mini 2011 in itunes video podcasts wont start. all systems updated.

Similar Messages

Maybe you are looking for