Mac Mini 2014 - HDMI - Maverics - HDCP

Just bought a brand new mac mini i5 intel Graphics HD4000 video card output through HDMI to an Anthem AVM 50 HDCP compliant receiver which outputs to HDCP compliant 55" samsung DCP compliant LED tv. I get the same HDCP compiant error in itunes playing any content at all. Running Maverics at the latest version 10.9.2. (All other devices, bluray, FIOS HD DVR work perfectly fine through this same system). What is also a problem is that netflix streaming causes a DRM error as well. No matter how many times i re-install silverlight. Does anyone have any suggestions or advise?

This HDPC thing is a pain in the butt and so I'm going to post in most forums my fix.
Came home from work my computer was at login and when I logged in playing up and had difficulty signing in and restarting.
Now hang on a minute cant be my mnonitiorFound out later my son had blown a sandwich maker up a cheap peice of ***** my wife had bought and blown the circuit breakers on the house power so similar to blackout. Not that this caused the HDPC problem but led to it I am assuming.
So did all the forums etc etc did the rounds trying to find a fix to this sudden inability to play any movies TV shows or music through iTunes.
Now hang on a minute it cant be my Samsung monitor because Ive been wacthing these movies etc through it before ? Cant be the bluetooth speaker because alert sounds are coming through.
Can't be the TV because they've all worked before through ATV OK so found a piec on System Management Rest difficult with a Mac MIni and bluetooth keyboard and Trackpad but found the way to do that.
Didn't fix the problem but, I came across a piece in some small forum re iTunes being the culprit and it made some sense to me as I could still play this content through Quicktime, yes it wouyld all play on Quicktime.
So Deleted backed up my iTune Library , not hard it's on an external drive just ejected that then proceeded to delete everything iTunes from my cmachine everythjing I could find prefs etc in every library all out.
Did a complete clean install of iTunes latest vers mounted the exeternal drive with my iTunes media folder on it told iTunes where it's media folder was and hey bingo everything plays again no probs.
So Thats how I stopped the dreaded HDPC problem for me.
1. Check the stuff plays on Quicktime on your monitor if it does this then it's a big bet iTunes is the culpret.
2. If you suspect iTunes and not the monitor/s then do a complete delete after backing up content and a clean instal of iTunes
3. Restart your computer all should be good
A calssic symptom if everything was working OK before and no HDPC probs occured points to software as iTunes not your monitors or cables.

Similar Messages

Mini DP to HDMI does not work with Mac Mini 2014?

Hi All,
I just upgraded from a Mac Mini 2011 i5 to a Mac Mini 2014. My old Mini worked fine running 2 displays with an HDMI cable to one monitor and a Mini Displayport to HDMI from the Thunderbolt port to another monitor. I can't seem to get the new 2014 Mini to see the monitor from either the Thunderbolt ports. Is this no longer supported?
Thanks
Ray

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff

Which HDMI Standard have the new mac mini(2014)? 1.4 or 1.4a

Which HDMI Standard have the new mac mini(2014)? 1.4 or 1.4a

This only says 1.4
Mac computers: Frequently asked questions about using HDMI - Apple Support
Which version of the HDMI spec do Macs with HDMI support?
Mac computers released after Mid 2010 are designed to work with HDMI devices complying with versions 1.0, 1.1, 1.2, 1.2a, 1.3, 1.3a, and 1.4 of the HDMI specification.

HDMI in Mac Mini 2014

Hi people, about a month ago, I received my new Mac Mini 2014, I connect it to my Panasonic 22" LCD TV, and I get the surprise of a not good image quality, I put down the Sharpness, and Noise Reduction, but still seems blurry and fuzzy text, it don't seems clear. Start reading on internet, found the solution buying a Mini DisplayPort to VGA Adapter, my TV got a VGA port, and it means could work, this might be the solution? or could be another? Also I try using SwitchResX but nothing changes, also my TV doesn't got the option of change the HDMI input to PC. This problem isn't to bad, but working or reading is really annoying and I know that could see better.
My Regards, to the Apple Community.

Maybe VGA would be better. I would first try:
http://www.ireckon.net/2013/03/force-rgb-mode-in-mac-os-x-to-fix-the-picture-qua lity-of-an-external-monitor#comments

Mac mini 2014 won't do 5.1 surround sound from HDMI port

I can't seem to get my Mac mini 2014 to do 5.1 surround sound from the built-in HDMI port to my home theatre system. When I run the Audio MIDI Setup program the only option is 2ch-24bit (stereo). Now I didn't have this issue when I tested it with a Mac mini 2012 running 10.9.5. It allow me to select 6ch-24bit (5.1) and Encoded Digital Audio. I also don't have an issue with the Mac mini 2014 if I use a Belkin Mini DisplayPort to HDMI Adapter connected to one of the Thunderbolt 2 ports. It does 5.1 surround sound just fine. So is there something wrong with the built-in HDMI port on the Mac mini 2014 or OS X 10.10?

Hello mrbraindead,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having problems with your VLC audio since updating to Windows 8.1. I am providing you with a link to a thread I found on en.Kioskea.net titled VLC video player suddenly has no sound. There are numerous solutions provided here which is why I am providing you with the link. I would review the posters solutions and ensure that you have checked all the suggestions they make.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Installing Windows 7 on Mac mini 2014

Hi,
i stuck trying to install Windows 7 on a Mac mini 2014. It is connected to a monitor using the DP-to-VGA-Adaptor.
I tried both, installing from (original) Windows-DVD and from a USB-Stick (always following the Bootcamp Installation procedure).
But during the required reboot to the windows installation, the monitor will stay black and enter the sleep mode. It seems to be a display driver problem.
Is there anyone, who can help me?

Finally, i was able to solve the problem:
the problem was the DP-to-VGA-Adaptor. I connected the mini to my TV using HDMI and got a picture from the Windows installer !
Thank you for helping me!

Toslink mac mini 2014

Hi,
can someone confirm if mac mini 2014 supports digital output, (TOSLINK adapter)?
Thanks
Victor

Hi, I reply to my question.
I tried yesterday and... Yes, it has optical audio output. You can use an O.Fcable with a a TOSLINK adapter and enjoy Dolby Digital Sound. (Same with the HDMI output)
Regards

New mac mini 2014 - thunderbolt 2 - 4k @ 60 Hz possible?

The headline says it already. Is it possible to run a 4k monitor with 60Hz with the the mac mini 2014 via thunderbolt 2 to a DisplayPort (DP) 1.2 connection? HDMI can only do 30 Hz which is not smooth enough for daily usage.

This concludes no
4k at 60Hz Via Displayport on Late 2014 Mac Mini

Mac mini 2014 FLICKERING :(

Hello
Hello i have mac mini 2014
its connected to the samsung smart tv by hdmi (i tested 2 of them)
When mac boots up on the screen i saw multiple artifacts (artifacts similar to analog tv)
When osx power off screen the problem also persists
I see artifacts alternating with a black screen and after some time the image appears
while booting I can not see anything beyond the artifacts (I can not choose between osx and windows)
if anyone had a similar problem?
http://osxdaily.com/2014/01/04/fix-flickering-screen-external-display-mac/
how to fix? i cannot use my mac

i see lots of people have this problem (flickering, no hdmi signal, loong boot) its the same problem i think
Anyone from Apple know this?
Bad drivers is my idea
btw warranty on my country its bad idea

Mac Mini 2014 Oct cannot wake up after sleep

Mac Mini 2014 Oct Version, cannot wake up after sleep by typing on keyboard or moving mouse (both hardwired USB) if external HDMI screen goes to sleep mode too (usually after 1 min if no signal coming from the MAC). To wake up, I ust turn off and turn on the screen and keep typing on the keyboard. I already checked "prevent computer from sleeping if display goes to sleep". But does not help. This is very annoying. I now try to set the sleep timer to more than 1 hour. Wasting my energy and not helping. I tried connecting my HDMI screen to a HDMI to mini-Display port adaptor cable, then plug into the thunderbolt port of the MAC. Same issue, no improvement.

I may know whats going on with the wake from sleep issue. I have a Mac Mini 2012 but this fix (see below) should work on any product running 10.8.2 Mine is at 10.10.1 and it worked.   First off you can tell if your Mac Mini is in sleep mode by looking at the small light on the front of the Mini. If its pulsing... going from bright to dim its in sleep mode. If you put your Mac in sleep mode, or it goes into sleep mode it will wake from sleep BUT ONLY for the first 4 hours. After 4 hours it will go into what is known as "safe sleep". The light on the front will be off and you won't be able to wake your Mac. The only way to wake the Mac when in safe sleep is to hit the power button and then wait a minute or longer as your system will need to pull the data from the disk and load to ram. This is causing the issue where its not waking from sleep. You can move your mouse or hit the keys all you want but it won't wake from sleep. This is a real pain as you have to press the power button on the back of the Mac mini and wait for the system to come out of its slumber.   Here's what Apple says:
With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. This is normal behavior for the following models:
MacBook Pro (Mid 2012 and later)
MacBook Pro (Retina, Mid 2012 and later)
MacBook Air (Mid 2012 and later)
iMac (Late 2012 and later)
Mac mini (Late 2012 and later)
I have found a fix that puts an end to this nonsense..... Go to the Mac terminal (Google if you don't know how or youtube) and run the following commands (Very easy to do and if a novice like my self can do you can for sure)
1. When in the terminal mode type:
pmset -g          This will show your current configuration of your sleep, hibernate, etc You may want to print so you can restore these values if needed.
2. Change your standbydelay to 86400    86400 is number of seconds which is 24 hours. Here’s the command:
sudo pmset -a standbydelay 86400
3. Change autopoweroffdelay to 86400 Here’s the command:
sudo pmset -a autopoweroffdelay 86400
4. At last but not least change autopoweroff to 0   Here’s the command:
sudo pmset -a autopoweroff 0
Run pmset -g to verify your setting have changed. I rebooted my system and checked again to make sure. Since I made the changes no more going into Safe sleep!!! You can change the values to what you like. I used 86400 secs. (24 hours) I hope this helps!

Problem with sound in rented itunes series on mac mini (2010) hdmi

Hello,
I just bought the new mac mini with HDMI. It is connected via HDMI to my receiver Denon AVR 3310. The receiver shows that it has "multi channel in" on the display.
I made all the configurations so that i can watch dvd an the mac mini. When i play a movie with Dolby Digital the receiver does show that on the display and playback is possible without any problems. All my 5.1 speakers play sound.
The big problem is with iTunes. When I want to watch rented series from iTunes Store, for example Dr. House, only 2 speakers of my 5.1 are used. And when I change to surround in iTunes I can only hear static noise.
What is the problem? What is wrong with iTunes?
Thanks in advance

I am having the same issue.
I have a Panasonic TH-50PX60U, and a Yamaha RX-V2065. The Mini is plugged into the Yamaha via HDMI and Yamaha to TV via HDMI.
Problem: Just to clarify I do NOT have a video problem. That part seems to be working fine, my problem is with audio. When ever I switch inputs on the receiver or turn the system off (not the Mini, that always stays on) the audio defaults back to the internal speaker in the Mini. I have to go into system settings and change it back to the HDMI audio out. This is super frustrating. I'm sorry if I posted this in the wrong area, but it's the only thread that looked like it might have an answer. Thanks!

Can I connect my PS3 to my mac mini via HDMI ?

Hello, I would like to know if I can connect my PS3 to my mac mini via HDMI ?
I don't have a TV anymore so I really need to know if I can use my mac mini as one.

Maybe this:
http://eshop.macsales.com/item/Elgato/10025010/
But you need OSX 10.7 or later
and if you have Thrunderbolt connection on your Mini then this maybe:
http://eshop.macsales.com/item/Blackmagic%20Design/BINTSTBEXT/
You YOu my be able to Google and find another videi-in adopter for your Mini

Mac Mini 2014 with Apple bluetooth keyboard and Magic Mouse

Hi all,
I'm currently in the process of moving from my old MacBook to a Mac Mini 2014 and I have a couple of questions regarding functionality of the Apple bluetooth keyboard and Magic Mouse with the Mac Mini.
As these are the only keyboard and mouse I have available to me as I currently only have the one computer in the house, I'm wondering how I will pair them with my new Mac Mini (arriving next week for Christmas) without a wired user input device (keyboard or mouse). When I paired them with my MacBook, I of course had its trackpad and keyboard to navigate through the various steps, but as the Mac Mini does not have these, how does the pairing process work? Will I have to get my hands on a wired mouse/keyboard? I'm asking in advance because I need to get my new system up and running to start work on 27th December and so I need to know if I should pick up a cheap wired mouse/keyboard in advance.
My second question relates to the Mac Mini, Apple bluetooth keyboard and Boot Camp. Usually, when I want to boot into Windows on my MacBook, I hold down the Option/Alt key on my MacBook's built-in keyboard to be given the choice of operating systems. Sometimes when I do this using the bluetooth keyboard, it hasn't paired in time and it boots straight into OS X, so I have to wait until that has booted, shut down and then try again. Clearly, this might be a problem on a Mac Mini if I have urgent work I need to complete in Windows, so rebooting over and over until my keyboard finally pairs in time isn't desirable. Any tips here would be greatly appreciated!
Thanks in advance for your help!

If you unpair your BT KB and mouse from the old computer they should pair during the initial setup of the Mini. However, sometimes they donot a wired KB and mouse is required. You can use any USB PC KB and mouse.
Once you get the BT KB to work you can use the Option key on the BT KB while booting to get your choice of OS to boot into.

Mac mini 2014 detect lcd monitor problem

Hi.
about 2 weeks ago, I bought new mac mini 2014 and dp - vga connector.
I have mitsubishi rdt179s lcd monitor.(17') , d-sub port + dvi-d port.
I must to use d-sub port.
when I open display menu, my monitor spec is different.
only " display 13.9 800x600 ".
how can I fix this? to 17' and 1280x1024...
ty for read...

Try installing and using one of these apps
SwitchResX – The Most Versatile Tool For Controlling Screen Resolutions On Your Mac
Display Menu from Mac App Store

Mac Mini 2014 Not reconising USB connections for ipads

Hi, we have a Mac mini 2014 1.4GHz and currently having some issues with it. The Mac mini is used in an education setting. We are using the Mac mini for updating iPads in conjunction with a sync and charge trolly. When we are using the Apple Configurator to create profiles to push out to the iPads not all are being recognisetheir are 26 iPads in total and only a maximum of 18 is ever detected. ihave tried with my own personal laptop which is a MacBook Pro early 2011 and detects all 26 using the Apple Configurator. Does anyone know about USB limitations on the new Mac mini's? Also, we have had a replacement from the supplier and still the same.
Any help would be hugely appreciated.

Thanks Gary. Given your confirmation that it should be possible, I've taken the fact that the external drive doesn't appear as a choice in "startup disk" as an indication that my disk is the issue. I did try two alternatives method to get the .iso to disk given your hint,
The first, using UNetbootin rather than my linux distribution and it does come back with a message rather specific after it finishes: "The created USB device will not boot off a Mac. Insert it into a PC, and select the USB boot option in the BIOS boot menu".
The second, using Disk Utility but the restore section for the target volume doesn't seems interested in me dragging the .iso to the 'source' field.
And that's with two different OS's .iso. so assuming that's not the right alternative either.
Few questions from there if I may,
Is there anything special I should take care off while doing the formatting to boot from a mac (mini)? (I'd welcome any link to a validated method)
what do you do when you have a non mac keyboard? (I had used "C")
should the PXE method have worked as well on the mac mini?
(Thanks again for that first response Gary)

Mac Mini 2014 - HDMI - Maverics - HDCP

Similar Messages

Maybe you are looking for