Mac Mini 2014 Not reconising USB connections for ipads

Hi, we have a Mac mini 2014 1.4GHz and currently having some issues with it. The Mac mini is used in an education setting. We are using the Mac mini for updating iPads in conjunction with a sync and charge trolly. When we are using the Apple Configurator to create profiles to push out to the iPads not all are being recognisetheir are 26 iPads in total and only a maximum of 18 is ever detected. ihave tried with my own personal laptop which is a MacBook Pro early 2011 and detects all 26 using the Apple Configurator. Does anyone know about USB limitations on the new Mac mini's? Also, we have had a replacement from the supplier and still the same.
Any help would be hugely appreciated.

Thanks Gary. Given your confirmation that it should be possible, I've taken the fact that the external drive doesn't appear as a choice in "startup disk" as an indication that my disk is the issue. I did try two alternatives method to get the .iso to disk given your hint,
The first, using UNetbootin rather than my linux distribution and it does come back with a message rather specific after it finishes: "The created USB device will not boot off a Mac. Insert it into a PC, and select the USB boot option in the BIOS boot menu".
The second, using Disk Utility but the restore section for the target volume doesn't seems interested in me dragging the .iso to the 'source' field.
And that's with two different OS's .iso. so assuming that's not the right alternative either.
Few questions from there if I may,
Is there anything special I should take care off while doing the formatting to boot from a mac (mini)? (I'd welcome any link to a validated method)
what do you do when you have a non mac keyboard? (I had used "C")
should the PXE method have worked as well on the mac mini?
(Thanks again for that first response Gary)

Similar Messages

My new mac mini does not see usb drives, but in hardware info the usb is visible

my new mac mini does not see usb drives, but in hardware info the usb is visible
i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
what is wrong and doe anyone has a solution ?

It does not show up in disk utility, its only visible through systeminformation.
When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
To remove it I shut down the computer because I cannot eject the USB device anywhere.
After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a monitor and keyboard for the Mac mini, either through the USB connection or thru Wi-Fi?

I plan to purchase a Mac mini and then a new iPad. Can I use the iPad as a keyboard and screen for the Mac mini, using either the USB connector or Wi-Fi?

I'm sorry, I should have said thru Bluetooth, not Wi-Fi. I want to use the mini as a base station and the iPad like a laptop that I can sync when I'm home and carry with me when I travel. Is is possible to hook these 2 up - iPad/mini, through Bluetooth? I understand I need to use a regular monitor/keyboard/mouse on the initial install.

Mac mini 2014 - boot from usb key/drive

Hi,
I've just unpacked the latest mac mini, bought two days ago.
I am trying to get it to boot of a bootable usb key, bootable usb hard drive and PXE server to install another OS.
All methods failing so far; I always get into OSX. I've tested the PXE server with another client and this was working just fine.
Any hint for me please? (besides buying an external cdrom)
Thanks.

Thanks Gary. Given your confirmation that it should be possible, I've taken the fact that the external drive doesn't appear as a choice in "startup disk" as an indication that my disk is the issue. I did try two alternatives method to get the .iso to disk given your hint,
The first, using UNetbootin rather than my linux distribution and it does come back with a message rather specific after it finishes: "The created USB device will not boot off a Mac. Insert it into a PC, and select the USB boot option in the BIOS boot menu".
The second, using Disk Utility but the restore section for the target volume doesn't seems interested in me dragging the .iso to the 'source' field.
And that's with two different OS's .iso. so assuming that's not the right alternative either.
Few questions from there if I may,
Is there anything special I should take care off while doing the formatting to boot from a mac (mini)? (I'd welcome any link to a validated method)
what do you do when you have a non mac keyboard? (I had used "C")
should the PXE method have worked as well on the mac mini?
(Thanks again for that first response Gary)

Mac Mini Server not seeming to connect with local computers

Anyone have a problem with Mac Mini Server? I had a Mac Mini Server set up with my network but I am only able to sporadically access files on the server from a local computer via Spotlight search.

Might try this...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474
Alternatives to Spotlight...
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
EasyFind...
http://www.devon-technologies.com/download/
Near the bottom of the page.

Installing Windows 7 on Mac mini 2014

Hi,
i stuck trying to install Windows 7 on a Mac mini 2014. It is connected to a monitor using the DP-to-VGA-Adaptor.
I tried both, installing from (original) Windows-DVD and from a USB-Stick (always following the Bootcamp Installation procedure).
But during the required reboot to the windows installation, the monitor will stay black and enter the sleep mode. It seems to be a display driver problem.
Is there anyone, who can help me?

Finally, i was able to solve the problem:
the problem was the DP-to-VGA-Adaptor. I connected the mini to my TV using HDMI and got a picture from the Windows installer !
Thank you for helping me!

Mac Mini (late 2012) Ethernet Losing Connection

Problem: Throughout the day, my Mac Mini loses it's ethernet connection for several seconds. Using iStat Menus the network tab shows that the ethernet connection is "Yellow" for "Not Connected" and I don't have an IP from my router. The same thing is reflected within System Preferences -> Network. This only lasts several seconds, but if I am streaming something or trying to stream a large file across my private network it can cause issues and be rather annoying.
I've already confirmed that it is not a router issue or a port/switch issue. I've tried different ports and rebooted the router several times and even updated the router firmware, regardless the Mac still occasionally drops connection. No other computer on the network including a Macbook Pro exhibits this behavior, it is only this Mac Mini that is doing it.
All my Ethernet settings are automatic, and I've tried setting everything to manual as well to no avail. The computer isn't over heating, temps range anywhere from 40C to 75C underload.
I am not sure what is causing this. I haven't run into this problem before and it JUST started recently.
Anyone have any ideas? Any solution? Any additional steps I can test for trouble shooting? My Mac is all updated as well.
Router I am using is ASUS RT-N56U with a Trendnet 5-port switch.

Hello, might try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

How do I combine my content from 3 external hd's and my 1 Mac Mini to my new Time Capsule (which is connected to my Mac Mini) and not have to use my external hd's again? My Mac Mini wont hold all the content on the external hd's.

My 3 external hd's are 500GB (total 1.5TB) and my Mac Mini is 500GB (Time Capsule is connected to this). I want to be able to have all the content from all these sources stored on my Time Capsule as if I only had 1 external drive. Is this possible? It is my understanding that when Time Machine backs up my Mac Mini I have to have my external drives connected since my Mac Mini does not have enough space on it to hold all the content on the exgternal hd's. I can only connect 1 external hard drive at a time and I want to get rid of them and consolidate.
And having to go back in time to search for files on 1 external hard drive and then back in time for the other external hard drive is not the most efficient thing to do. I would like it all in one place.
Thank you for your help!!

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Mac Mini will not connect to Air on bluetooth.

Mac mini will not remain connected to Mac Book Air when pairing with bluetooth. Pairing initially goes as expected providing the code. When pair is pressed the two systems connect for about 1 second and then system states that they are not connected. I am operating 10.9 on the Mac Mini and 10.8.5 on the Air

To my knowledge, you cannot connect two computers using Bluetooth. You can connect them, of course, via a network.
Barry

Mac mini (2014) wont sync notes and ibooks with ipad air 2 and iphone, photos ok

MAc mini (2014) will not sync notes or ibooks with ipad air 2 and iphone 5s, photos are ok, any ideas please?

Syncing Notes on iPhone, iPad, and iPod touch - Apple Support
You have to use iCloud for the Notes. Books can be synced via iTunes.

Mini DP to HDMI does not work with Mac Mini 2014?

Hi All,
I just upgraded from a Mac Mini 2011 i5 to a Mac Mini 2014. My old Mini worked fine running 2 displays with an HDMI cable to one monitor and a Mini Displayport to HDMI from the Thunderbolt port to another monitor. I can't seem to get the new 2014 Mini to see the monitor from either the Thunderbolt ports. Is this no longer supported?
Thanks
Ray

Hi there LaureynR,
You should still be able to do this. I would recommend taking a look at the article below for troubleshooting steps.
Apple computers: Troubleshooting issues with video on internal or external displays
-Griff

Mac Mini 2014 does not support 4K SST at 60hz displays

Many questions on this - bottom line, 2014 Mini hardware will only drive 4K at 30hz .. not the most desirable solution.
Does Yosemite 10.10.3 now enable Mac Mini 2014 to drive 4K SST displays at 60z? Answer = NO.

That is correct

Mac Mini 2014 Oct cannot wake up after sleep

Mac Mini 2014 Oct Version, cannot wake up after sleep by typing on keyboard or moving mouse (both hardwired USB) if external HDMI screen goes to sleep mode too (usually after 1 min if no signal coming from the MAC). To wake up, I ust turn off and turn on the screen and keep typing on the keyboard. I already checked "prevent computer from sleeping if display goes to sleep". But does not help. This is very annoying. I now try to set the sleep timer to more than 1 hour. Wasting my energy and not helping. I tried connecting my HDMI screen to a HDMI to mini-Display port adaptor cable, then plug into the thunderbolt port of the MAC. Same issue, no improvement.

I may know whats going on with the wake from sleep issue. I have a Mac Mini 2012 but this fix (see below) should work on any product running 10.8.2 Mine is at 10.10.1 and it worked.   First off you can tell if your Mac Mini is in sleep mode by looking at the small light on the front of the Mini. If its pulsing... going from bright to dim its in sleep mode. If you put your Mac in sleep mode, or it goes into sleep mode it will wake from sleep BUT ONLY for the first 4 hours. After 4 hours it will go into what is known as "safe sleep". The light on the front will be off and you won't be able to wake your Mac. The only way to wake the Mac when in safe sleep is to hit the power button and then wait a minute or longer as your system will need to pull the data from the disk and load to ram. This is causing the issue where its not waking from sleep. You can move your mouse or hit the keys all you want but it won't wake from sleep. This is a real pain as you have to press the power button on the back of the Mac mini and wait for the system to come out of its slumber.   Here's what Apple says:
With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. This is normal behavior for the following models:
MacBook Pro (Mid 2012 and later)
MacBook Pro (Retina, Mid 2012 and later)
MacBook Air (Mid 2012 and later)
iMac (Late 2012 and later)
Mac mini (Late 2012 and later)
I have found a fix that puts an end to this nonsense..... Go to the Mac terminal (Google if you don't know how or youtube) and run the following commands (Very easy to do and if a novice like my self can do you can for sure)
1. When in the terminal mode type:
pmset -g          This will show your current configuration of your sleep, hibernate, etc You may want to print so you can restore these values if needed.
2. Change your standbydelay to 86400    86400 is number of seconds which is 24 hours. Here’s the command:
sudo pmset -a standbydelay 86400
3. Change autopoweroffdelay to 86400 Here’s the command:
sudo pmset -a autopoweroffdelay 86400
4. At last but not least change autopoweroff to 0   Here’s the command:
sudo pmset -a autopoweroff 0
Run pmset -g to verify your setting have changed. I rebooted my system and checked again to make sure. Since I made the changes no more going into Safe sleep!!! You can change the values to what you like. I used 86400 secs. (24 hours) I hope this helps!

Mac mini 2014 mDP out of range

Hi,
I have a strange issue with Mac mini late 2014 and NEC PA272W monitor. Mac mini and the monitor are connected by high quality mini display port cable.
Sometimes on boot the display is reporting: Out of range message H 14,6KHz. Its a sync problem?
Then I have to turn off and on the monitor to restore image.
Any advice to this?

Sadly, this "out of range" problem has re-appeared today :-/
This is log from the console:
08.02.2015 13:36:44,486 WindowServer[121] Received display connect changed for display 0x28da5200
08.02.2015 13:36:44,486 WindowServer[121] Found 1 modes for display 0x28da5200 [1, 0]
08.02.2015 13:36:44,486 WindowServer[121] Display 0x28da5200 changed state to offline
08.02.2015 13:36:44,490 WindowServer[121] No display devices are on-line. Switching to virtual display mode
08.02.2015 13:36:44,493 WindowServer[121] Received display connect changed for display 0x3f003d
08.02.2015 13:36:44,493 WindowServer[121] Found 1 modes for display 0x003f003d [1, 0]
08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[2560 x 1440], 35 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d02: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d01: GL mask 0x2; bounds (3585, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,506 WindowServer[121] CGXDisplaysDidReconfigure: Display added
08.02.2015 13:36:44,506 WindowServer[121] CGXDisplaysDidReconfigure: Display removed
08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[2560 x 1440], 35 modes available
Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d02: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d01: GL mask 0x2; bounds (3585, 0)[1 x 1], 2 modes available
off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:44,521 com.apple.AmbientDisplayAgent[169] AMBD: copyVCGTtoLUTtable() synth'ing linear LUT
08.02.2015 13:36:46,507 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
08.02.2015 13:36:46,518 DMProxy[373] CGSCopyDisplayInfoDictionary: error requesting display info dictionary (0x3e8)
08.02.2015 13:36:46,523 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x41dc9d00: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 3)
08.02.2015 13:36:46,526 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:46,539 DMProxy[373] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
08.02.2015 13:36:46,543 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x41dc9d00: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 3)
08.02.2015 13:36:46,547 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
08.02.2015 13:36:46,550 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
08.02.2015 13:36:46,554 com.apple.AmbientDisplayAgent[169] AMBD: copyVCGTtoLUTtable() synth'ing linear LUT
08.02.2015 13:36:46,555 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:47,000 kernel[0] EDID CEA Extensions not valid for audio [Revision ID]: 1 (minimum value: 3)
08.02.2015 13:36:48,212 WindowServer[121] Received display connect changed for display 0x3f003c
08.02.2015 13:36:48,213 WindowServer[121] Found 43 modes for display 0x003f003c [43, 0]
08.02.2015 13:36:48,213 WindowServer[121] Display 0x003f003c changed state to online
08.02.2015 13:36:48,239 WindowServer[121] New display device coming on-line. Switching from virtual display mode
08.02.2015 13:36:48,240 WindowServer[121] Received display connect changed for display 0x3f003d
08.02.2015 13:36:48,240 WindowServer[121] Found 1 modes for display 0x003f003d [1, 0]
08.02.2015 13:36:48,252 WindowServer[121] Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,252 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,252 WindowServer[121] Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,252 WindowServer[121] Display 0x28da5200: GL mask 0x1; bounds (0, 0)[2560 x 1440], 43 modes available
Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 38a3, Model 6948, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:48,252 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,262 WindowServer[121] Display 0x28da5200: Unit 0: Startup Mode 2560 x 1440, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80001000, ioModeDepth 0x0, IOReturn 0x0
08.02.2015 13:36:48,262 WindowServer[121] CGXDisplaysDidReconfigure: Display added
08.02.2015 13:36:48,262 WindowServer[121] CGXDisplaysDidReconfigure: Display removed
08.02.2015 13:36:48,263 WindowServer[121] Display 0x28da5200: GL mask 0x1; bounds (0, 0)[2560 x 1440], 43 modes available
Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 38a3, Model 6948, S/N 0, Unit 0, Rotation 0
UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
08.02.2015 13:36:48,263 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,263 WindowServer[121] Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,264 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
08.02.2015 13:36:48,264 WindowServer[121] Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
08.02.2015 13:36:48,273 WindowServer[121] MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x28da5200 device: 0x7fa849516e60 isBackBuffered: 1 numComp: 3 numDisp: 3
08.02.2015 13:36:50,241 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
08.02.2015 13:36:50,263 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
08.02.2015 13:36:50,267 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,270 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:50,301 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,304 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:50,312 DMProxy[374] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
08.02.2015 13:36:50,319 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
08.02.2015 13:36:50,334 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
08.02.2015 13:36:50,334 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,340 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:50,346 DMProxy[375] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
08.02.2015 13:36:50,350 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
08.02.2015 13:36:50,355 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
08.02.2015 13:36:50,359 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
08.02.2015 13:36:50,365 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
08.02.2015 13:36:51,808 Console[376] Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable

Mac Mini 2014 Not reconising USB connections for ipads

Similar Messages

Maybe you are looking for