Mac Mini 5, Dual Displays, and a Projector?

I'm considering purchasing a Mac Mini 5, but need it to support dual monitors and a projector simultaneously. When I use the system, I will be running skype, video camera, audio, and a projector (for power point presentations, websites, youtube videos, etc) at the same time.
Is this hardware setup possible, and if so, does it work well?

Video Support
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
DVI output using HDMI to DVI Adapter (sold separately)
Mac mini (Late 2014) - Technical Specifications

Similar Messages

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

Mac Mini 2014 Dual Displays

I just got a new Mac Mini late 2014. I was a little sad that I will not be able to use it at 4k @ 60hz. But I am wanting to use 2 2k monitors and wait until a new mac mini comes out that can handle 4k a little bit better. I have not seen if it can do 2 monitors at 2k (2560x1440) with 60hz. Does any one know for sure if the Mac Mini is able to do this?

Video Support
Support for up to two displays at 2560 by 1600 pixels, both at millions of colors
Thunderbolt digital video output
Native Mini DisplayPort output
DVI output using Mini DisplayPort to DVI Adapter (sold separately)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Dual-link DVI output using Mini DisplayPort to Dual-Link DVI Adapter (sold separately)
HDMI video output
Support for 1080p resolution at up to 60Hz
Support for 3840-by-2160 resolution at 30Hz
Support for 4096-by-2160 resolution at 24Hz
DVI output using HDMI to DVI Adapter (sold separately)
Mac mini (Late 2014) - Technical Specifications

How to change startup disk for a 2012 Mac mini with dual HDD and clean installed with Windows 8.1?

Hi,
I have a Mac-mini (late 2012 model), originally with Mac OS X Maverick Server installed (with two HDD). Recently, I had clean installed Windows 8.1 on one of the HDD (worked perfectly, just slow) and swapped the other HDD (with Mac OSX) with a SSD. I then cloned the Windows OS HDD in to the new SSD. Now I am trying to boot this Mac mini from this SSD, however, since this Mac mini do not have BIOS for me to change the boot sequence at the startup, is there any one can help?
Thank you,
Liusc

If you boot with the Option key depressed what boot options are shown?
Also:
Restart your computer
After Windows is installed, you can switch between OS X and Windows. Use the Startup Disk preference pane in OS X, or the Boot Camp system tray item in Windows to select your startup disk, then restart your computer
How to install Windows using Boot Camp - Apple Support

Anyone having Audio Issues with new Mac Mini, new Thunderbolt Display and new Pegasus R4?

I can't listen to the built-in speakers on my brand new Apple thunderbolt monitor to the terrible audio quality. I'm running Mac Lion on a new Mac Mini with a brand new Promise Pegasus R4 - all purchased in January 2012. The entire setup is connected via Thunderbust errh, I mean Thunderbolt.

Hi,
I'm also having an audio problem, which I suspect now is caused by my Thunderbolt display.
See https://discussions.apple.com/message/21499606#21499606 for the small thread.

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...

I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?

BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps?

I am going to buy a mac mini i7 with 3 thunderbolt displays for forex trading. the question is if i use bootcamp and run windows on the mac mini will the displays still run the same way as if i was running it on Lion?

I am going to buy a mac mini i7 with 3 thunderbolt displays for forex trading. the question is if i use bootcamp and run windows on the mac mini will the displays still run the same way as if i was running it on Lion?

No idea if Windows will do it, but you can run Windows without Bootcamp & have OSX available at the same time, which should give you all the Monitors that OSX uses.
Parallels...
http://www.parallels.com/
VmWare Fusion...
http://www.vmware.com/mac

Bluetooth lags on new Mac Mini w/ Wireless keyboard and Magic Trackpad

Hi everyone,
I just bought a new mac mini (the basic model) and attached it via HDMI to a HD TV. I bought the mac wireless keyboard and magic trackpad to go with it. Everything works except that both the keyboard and mouse are consistently slow. Not quite to the point of un-useable, but very noticeable.
I've read that it might be radio interference with the bluetooth signal. To test this, I put my Macbook Pro right next to the new mac mini (while it and the screen were on) and paired the keyboard and mouse to the macbook pro. Everything was super fast, no lag - so that leads me to think the problem is with the Mac Mini. I've tried playing with all the bluetooth options, to no avail.
Anyone have any suggestions? I've also tried attaching a bluetooth magic mouse and had the same slowdown. Nothing seems to affect the lag, it's very consistent and probably around half a second between keystroke or mouse movement and it's reflection on the screen.
Thanks,
-Mike

Hey All,
I've got the same issue with my Mac Book Pro and a new Samsung LED 3D TV. Its connected through a DVI out from the mac to a gold HDMI adaptor, then to HDMI into the TV. I've used this set-up with my last HDTV which was a Sharp LCD, and there was no lag and no issues.
I noticed that for me, the lag appeared on the TV, but not on the laptop, so I thought it might be the connection (If I went right to HDMI instead of an adaptor maybe it'd be better) but I don't think it is given that the last TV worked fine.
I then went to my display settings in the control panel on my mac and changed the refresh rate from 24 Hertz to 60 Hertz (NTSC) on the TV and the issue has pretty much completely dissappeared. Not sure why that was the default, but I imagine certain video and other media will play even smoother as well!
Woo hoo!
Hope you all figure this out too!
TS

Is the current top line Mac Mini with an SSD and 16GB RAM up to PS CS6 and LR5?

I currently have a 2007 MacPro 2007 2.66GH Xeon dual core ( 4 cores ) with 9GB RAM.
I had been thinking of the new MacPro but it will probably be hellishly expensive. I was thinking of getting a top of the line Mac Mini with 16GB RAM and an SSD and using USB 3.0 and Thunderbolt to run most of my programs and data storage externally. I use LR5 and PS CS6.
I was just wondering if the latest Mac Mini was up to the taks with 2-4 GB files and multiple layers? How well do this little guys hold up? I know that the power supply is now internal. Do they run cool enough.... even with an SSD?
Any Mini users out there care to chime in?

Well, the big drawback on the Minis is Intel integrated Graphics.
iMacs & Minis run far too hot in my Opinion, Apple likely tested them in a 68° F. air conditioned room.
I myself would be looking into an older iMac, or Widows PC!
iMac "Core i5" 2.5 21.5-Inch (Mid-2011)... Geekbench: 7241/7970
iMac "Core i5" 2.7 27-Inch (Mid-2011)... Geekbench: 7844/8565
iMac "Core i5" 2.7 21.5-Inch (Mid-2011)... Geekbench: 7890/8647
iMac "Core i7" 2.8 21.5-Inch (Mid-2011)... Geekbench: 10248/10690
Mac Pro "Quad Core" 2.66 (2009/Nehalem)... Geekbench: 8269/9237
iMac "Core i5" 2.9 27-Inch (Late 2012)... Geekbench: 9225/10271
Mac Pro "Eight Core" 2.8 (2008)... Geekbench: 9162/10564
Mac Pro "Quad Core" 3.2 (2010/Nehalem).. Geekbench: 9850/10440
MacBook Pro "Core i7" 2.5 27" Late 2011... Geekbench: 10706/11699
Mac mini "Core i7" 2.6 (Late 2012)... Geekbench: 11367/12807
iMac "Core i7" 3.4 27-Inch (Mid-2011)... Geekbench: 11648/12651
Mac Pro "Eight Core" 2.26 (2009/Nehalem)... Geekbench: 11864/13363
Mac Pro "Eight Core" 2.66 (2009/Nehalem)... Geekbench: 14317/16093
Mac Pro "Eight Core" 2.93 (2009/Nehalem)... Geekbench: 15572/17619
Mac Pro "Twelve Core" 2.66 (2010/Westmere)... Geekbench: 20294/22605
iMac "Core i5" 2.7 21.5-Inch (Late 2012)... Geekbench: 8068/9145
Mac mini "Core i7" 2.3 (Late 2012)... Geekbench: 10626/11825
iMac "Core i7" 3.1 21.5-Inch (Late 2012)... Geekbench: 12490/14143
iMac "Core i7" 3.4 27-Inch (Mid-2011)... Geekbench: 11648/12651... Geekbench: 12857/13772

HT201541 Our Mac-Mini has gotten slower and slower. Is there a utility that would help speed it up?

Our 4 plus year old Mac-Mini has gotten slower and slower. Is there a utility that would help speed it up or is there another?

Hello! I’ve offered the steps below to similar posts in the past and they helped out getting to the solution (or at least find the cause). I suggest them to you too in this case. It will take you about 30 minutes or less to do these, depending on how bad the problem on your Mac is.
The goal here is to boot your Mac to the so-called Recovery partition where you’ll have a chance to repair the disk and the disk permissions using the Disk Utility and Password Utility. This might solve your issue and even if it doesn’t- it’s still a decent maintenance step to perform. These steps won’t erase your data or reinstall your Mac in any way if you follow instructions carefully.
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [cmd] + [r] Keep these keys on your keyboard pressed until you either see an Apple Logo with a loading bar or a spinning gear.
After a few minutes, you’ll be presented with a Utilities screen. This is the Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue]
Disk Utility will display your computer’s harddrive in the left column. The default name for it is “Macintosh HD” and is usually the second one from the top. Click on it and click on the [verify disk] button. This will check your “Macintosh HD” harddrive partition for errors. If found, click [repair disk] unless you have a Fusion drive in your Mac and it says [fix] instead of [repair disk] please tell us before you continue! For a screenshot of what I mean, check this article from Apple: http://support.apple.com/en-us/HT202574
4/ Once done with the verifying or repairing of your “Macintosh HD” click [repair disk permissions]
This will check your partition for permissions errors. A common myth about this feature is that it will fix all permissions issues on your Mac, which is not true, but it will fix most systemwide issues. Also, here is a list of error messages that you can safely ignore if they pop up:
http://support.apple.com/en-us/HT203172
5/ Lastly we shall do a permissions/Access Control List repair on specifically your user’s home folder with a somewhat hidden tool in the Recovery partition. Close Disk Utility and find the menu called “utilities” in the top left corner of your computer’s display. It’s in between the menus “edit” and “window” Don’t be confused with the menu called “os x utilities”
Choose Terminal. A somewhat old-fashioned looking window will pop up, waiting for a text command from you. This is the Terminal.
After the # type: resetpassword and press return. Note that there is no space between ‘reset’ and ‘password’
What you’ll see next is an rectangular window that gives you the option to reset passwords. We are not going to that, however. Instead, click on “Macintosh HD” at the top. In the pull-down menu below that, choose your user's accountname. Skip all the rest and at the very bottom click the [reset]-button.
A spinning gear will appear and may stay on for a second or several minutes. It’s hard to predict exactly how long.
If you have multiple users on your Mac, I advise you to repeat this step for all your users.
We’re ready to reboot your Mac now. Click on the Apple Menu and choose “startup disk” Choose to boot from “Macintosh HD” Please let us know if this solved your issue, or if the steps above did not work, or could not be performed for some reason.
If they worked I suggest you do these steps everytime your Mac becomes slow.

No video signal in remote connection with Mac mini when the display is off

No video signal in remote connection with Mac mini when the display is off

So you mean that Mac mini is different than other ordinary computer and is need an active display to avoid black screen in remote session!!!!!Oh my god, Steve would be embarrassed!

I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't be opened by some users. How do I fix this?

We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac. These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's. When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access. The files that work properly don't have that configuration. I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it. We're all using PC's and they get the Error: Access Denied-Contact your administrator--or something similar. I've seen on the web similar issues and it may have something to do with ACL permissions. I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files. Thanks for a solution!!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

I have a Mac Mini late 2012 version and i am trying to reset to factory setting.

Hello, I had a bought a Mac Mini late 2012 version a couple months ago, and after i tried to install "pro tool" on my Mac, and FAILED. my Garage band wouldn't open anymore. it only tells me "garage band quit unexpectedly" when i open it. I tried uninstalled it and reinstall it again, but it still won't work.
So now, I want to jus5 restore the whole Mac mini to factory setting and erase everything in it.
I had read some of the threads in the community, and the Mac mini late 2012 doesn't come with an OS disk.
Therefore, is there anyone can tell me how i would be able to rest the Mac Mini later 2012 version back to factory setting and erase everything in it?
Thank you very much!
PS: i am not using Apple keyboard.

See:
http://support.apple.com/kb/HT4718

How do I set up my Mac mini to read iTunes and iPhoto files from my new Mac mini server?

Want my old Mac mini to read iPhoto and iTunes files from my new Mac mini server. Old Mac has no more room to store files. How do I do this?

Hello,
Have you tried enabling iTunes Sharing & iPhoto Sharing on the Server?
Or maybe...
http://support.apple.com/kb/ht1449
http://www.apple.com/itunes/inside-itunes/2011/02/how-to-move-your-itunes-librar y-to-another-hard-drive.html
http://support.apple.com/kb/PH2506
http://support.apple.com/kb/ht1229

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

Mac Mini 5, Dual Displays, and a Projector?

Similar Messages

Maybe you are looking for