Mac mini 6630m graphic card have problem during running windows 8.1 problem with bootcamp

Hi All,
     I need a help!
     I am follow the Apple officeal document install windows 8.1 operation sysmtem in my Mac mini with BootCamp , and I have install the bootcamp drivers.
     But I got a problem ,the Graphic Card and the Audio device is not work ,and show video controller error.
     I have install the bootcamp many times ,but it doesn't at all.
     Thanks all.
     mac mini infomation:
          mid 2011, graphic card AMD HD 6630m

Thank you for your reply!!
I have try to install the driver for the bootcamp ,but it dosn't work too.
now ,I have install windows 7 OS by bootcamp.
Thank you again!!
Best  wish!! 

Similar Messages

  • Is it possible to upgrade the Mac Mini's graphics card if I bring it into the Apple Store?

    I wanted to know if I bring in a Mac mini to the Apple Store, can they upgrade the mac to a AMD Radeon 6330M? If not, what can I do to play games a bit better?

    Nope, sorry, I believe it's part of the Logic board, not much you can do, but how much RAM do you have?

  • Problem creating Bootable Windows 10 USB drive with Bootcamp 5.1

    Hi all,
    I have read quite a number of threads (here and elsewhere on the internet) with problems creating a Bootable USB installation for Windows 10 on OSX Mavericks.    The usual response is "make sure your .ISO is unmounted".    With that being said, it appears that for most users on OSX Mavericks, this alone does not fix the issue.
    The specific error I get is:
    "Boot Camp only supports Windows 7 or later installation on this platform. Please use an ISO file for Windows 7 or later installation."
    As mentioned I have double checked that the ISO is not mounted.    Anyone happen to have any solutions?    Also, would creating a bootable drive from a windows machine still work with my Mac the same way it would if it was created with bootcamp?
    System specs are:     OSX 10.9 Mavericks, Early 2011 Macbook Pro, (MacBookPro8,3).
    Cheers,
    Jonathan

    W10 is not officially supported. BC Assistant checks available software signatures on ISO images to verify that it can be used. This checking is not always 100% fool-proof, though. You are using a 2011 MBP, which is also a factor in this. One option you can try is to install an evaluation version of W8+ and then upgrade to W10. The upgrade does not require BC Assistant, once Windows is fully installed.

  • My ipad iOS 8.1.1 to mac mini 10.7.5 sync freezes during 'syncing mail accounts'. anyone have an idea to help?

    my ipad iOS 8.1.1 to mac mini 10.7.5 sync freezes during 'syncing mail accounts'. anyone have an idea to help? every time i sync, using the cable, the process stops and freezes on 'syncing mail accounts'. i end up disconnecting the sync as i need to move on. this has been going on for a week now. anyone else, please? thanks very much, beth

    I just emailed the one note to myself and solved the issue.

  • I have recently bought my Mac mini ( July 12) and have already requested my free update code for mountain lion, got a reference nr, but I still haven't received a code via email to update? Its been 12 days. Any advice?

    I have recently bought my Mac mini ( July 12) and have already requested my free update code for mountain lion, got a reference nr, but I still haven't received a code via email to update with? Its been 12 days. Any advice?

    I am still in the return window but i really do not want to return my mac as i know it has the ability to do what i want, my problem is just finding the software that will work as i know there has been a lot of complications with OS X Mountain Lion with softwares that caim to be compatible but then later turn out not to be.
    I have been a windows user for years and this is really my first mac but apart from the hole software issue i find the mac 10x better than any windows computer i have ever used. For example i bought a HP laptop 4 weeks ago and has nothing but problems. At first the fans stopped working and making weird noises and then it began switching off when ever it felt like it and freezing like mad when i was trying to access the smallest program. I have found that now a days you dont get what you pay for with Windows especially since Windows 8 was released. Also Laptops such as HP now are just crammed with cheap parts, they dont take pride in their systems like they once used to unlike Apple. I know i will get more than a year or 2 out my mac (hopefully a lot more) but with windows systems it just seems to break all the time costing more money on extending warrantys. Also i like mac because i dont need to send it away if i ever get a problem, i can just take it into the apple shop half a mile down the road and they will fix it in store. Where as with windows i am waiting 2 weeks+ to just hear back from them.

  • I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    I'm new to Mac. I have an iPhone and a Mac Mini.  My original iTunes was on a Windows computer that crashed.  So, all of my iTunes Music and Movies are gone.  How do I get the movies and music from my iPhone to the new Mac Mini?

    If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help.  Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive. 

  • I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so wha

    I own a MAC Pro 3,1 (early 2008) and am running Mavericks 10.9.3 with no problems. I would like to add an I/O card to add USB 3 functionality or ESATA functionality but am unable to find a compatible card. As such my question...can I do this and if so what is the best card?
    Thank you

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?
    Also see:
    https://discussions.apple.com/thread/6282459?tstart=0

  • I have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    i have two computers. my laptop has os 10.6.8. my mac mini has 10.5.8, hence no app store. can i buy lion on my laptop and then burn a dvd of it and install it on my mac mini or does it have to be installed on the same computer it is bought with?

    You can do it. This article from Macworld will be helpful to you:
    http://www.macworld.com/article/161087/2011/07/install_lion_over_leopard.html
    I recommend the "brute-force" method.
    Just make sure you have your data backed up properly!

  • I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

    I am looking to buy a Mac mini, but I already have a monitor with a dvi plug in. Will I be able to use this monitor with the Mac mini??

    Here are the Mini's specs:

  • My mac mini is supposed to have a 320 gb hard drive but I can only find a macintosh 160 gb hard drive,*** ?

    My mac mini is supposed to have a 320 gb hard drive but I can only find a macintosh 160 gb hard drive,*** ?  Ilooked up the specsonline and it surely says 320 gb

    NVidia MCP79 AHCI:
      Vendor:    NVidia
      Product:    MCP79 AHCI
      Link Speed:    3 Gigabit
      Negotiated Link Speed:    1.5 Gigabit
      Description:    AHCI Version 1.20 Supported
    Hitachi HTS543216L9SA02:
      Capacity:    160.04 GB (160,041,885,696 bytes)
      Model:    Hitachi HTS543216L9SA02                
      Revision:    FB2AC53F
      Serial Number:    100202FBE203BNJ09V5F
      Native Command Queuing:    Yes
      Queue Depth:    32
      Removable Media:    No
      Detachable Drive:    No
      BSD Name:    disk0
      Rotational Rate:    5400
      Medium Type:    Rotational
      Bay Name:    Lower
      Partition Map Type:    GPT (GUID Partition Table)
      S.M.A.R.T. status:    Verified
      Volumes:
      Capacity:    209.7 MB (209,715,200 bytes)
      Writable:    Yes
      BSD Name:    disk0s1
    Macintosh HD:
      Capacity:    159.7 GB (159,697,911,808 bytes)
      Available:    95.38 GB (95,378,182,144 bytes)
      Writable:    Yes
      File System:    Journaled HFS+
      BSD Name:    disk0s2
      Mount Point:    /

  • Problem during installation of EHP4 on IDES with preinstalled EHP3

    I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
    Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
    Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
    Last error code set: Component 'WEBCUIF' not found
    When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
    I need help

    When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
    You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
    Nelis

  • Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number.  Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?

    Just started up my Mac Mini out of the box, using a USB windows keyboard, it will not recognize letters so I am unable to enter serial number.  Anything I can do to get the mini mac right out of the box to recognize the windows keyboard?  Do I have to buy an Apple Keyboard to get it to work right out of the box?

    Is this a normal USB keyboard or is there anything specialized about it? Does this keyboard require you to install any special software to use it on a Windows box? Or is it usually a plug & play keyboard?
    Normally if a Mac does not recognize a keyboard it asks you to press certain keys to identify the keyboard. What is happening on screen with this keyboard? What serial number are you referring to?

  • I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

    I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

    Again thank you.  If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email.  That's my understanding anyway.  Next will my existing .pst file copy directly into mac mail or do I have to runs translator  as I recall reading something about that ages ago when I started thinking Mac

  • I have a PC running Windows XP (yes an antique) with CS3 Photoshop and InDesign and lightroom 2 (yes all antiques). I have acquired a PC running Windows 7 with no programs. I also have a MacBook pro  with full CS5 suite. The programs were already loaded w

    I have a PC running Windows XP (yes an antique) with CS3 Photoshop and InDesign and lightroom 2 (yes all antiques). I have acquired a PC running Windows 7 with no programs. I also have a MacBook pro  with full CS5 suite. The programs were already loaded with I got it as a gift. Question 1. If I find serial numbers used to download programs to the old PC, can those CS3 programs be put on the newer PC. Question 2. I really want to put CS5 suite on PC machines. Is that possible? Especially since my MacBook is showing some hard drive problems.

    You should be able to get the CS3 programs installed and running on the new pc since CS3 is spec-ed for Windows 7 Service Pack 1.  Downloading the programs does not require a serial number.  You can find them here:  Download CS3 products  but you will need the serial number to activate the programs.  You might be able to find that thru your Adobe account online.
    You will not be able to install the CS5 Mac version on a PC and you won't be able to trade it to a PC version either due to it being an older version.  Trades are allowed only for the latest version (CS6)

  • I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network

    I just purchased an Apple TV.  I have a pc running windows 7.  It is connected to a router and the router is connected to a wireless router.  I connect my iPhone, iPad and apple tv to wireless network but do not know how to put the pc on the wifi network so the Apple TV can do home share.

    I don't mean to be facetious but sometimes the simplest things are overlooked.  To connect to your library you have to have the computer where the iTunes library is located running and with iTunes open.  It also needs to be on the same network.  My network is dual band and works with either stream but a friend of mine does not.  He has to set the computer and the Apple TV to the same band.  Hope this helps.

Maybe you are looking for

  • How do I point my RDS 2012 R2 server to pick up the RDS licences from a dedicated RDS Licence server

    I have configured a dedicated server 2012 R2 box to be the RDS licence server for the Domain. When I use the Review configuration option, I get 2 green tick circles which indicate to me that all is well. However, when I built a separate RDS Server 20

  • Problem with iChat over wireless network

    iChat with AIM account has always worked fine, but from the moment I installed a netgear router over a wireless network it enters a loop of disconnection/connection until I get the message "you have been connecting and disconneting too frequently". S

  • Km document iview problem

    Hi,    I have created a new portal desktop and new framework page.i have created some KM document Iviews and assigned those iviews to a role.I have created anonymous access to the user.But i couldnt display the content of the iviews as it is showing

  • Query regarding Open Hub Services

    Hi All, I am trying to find out if delta extraction is possible through open hub services to a cube which is running daily full load? To make the scenario more clear: I have a cube  A which is getting loaded on a daily basis (FULL LOAD) but before lo

  • Can't get APM (Standby/Hibernate) to work!!

    This is a real mystery. I've read through dozens of postings here where people are having problems disabling APM for their systems -- I have the exact opposite problem. When I first put the system together, set PM to S3/STR. Installed fresh WinXP Pro