Mac mini adapter 110V in networks with a voltage of 220V

Hello.
I apologize for my English.
At sing electric adapter is written --
"input AC 100-120V 50-60 Hz 2.0A"
Can I use in networks with a voltage of 220V?
Thank you for your help.

110 to 220 Voltage Transformer:
http://www.amazon.com/110V-220V-VOLTAGE-CONVERTER-TRANSFORMER/dp/B000IMM26U
http://www.starkelectronic.com/st500.htm
You can also find more by searching "voltage adapter 220v to 110v"

Similar Messages

  • Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

    Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
    I can't figure out how to get this to work. Is it possible?

    WildBull wrote:
    Will it work if I connect via usb instead of firewire?
    No. There is no "USB Target Disk Mode".
    Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

  • Mac Mini MID 2011 2.5GHZ with 8GB of RAM from 4GB

    Hello Everyone!
    So I want to upgrade my Mac Mini MID 2011 2.5GHZ with 8GB of RAM from 4GB.
    Mac Mini Hardware Summary
    Mid 2011  
    Processor  2.5 GHz Intel Core i5
    Memory  4 GB 1333 MHz DDR3
      Model Name:     Mac mini
      Model Identifier:     Macmini5,2
      Processor Name:     Intel Core i5
      Processor Speed:     2.5 GHz
      Number of Processors:     1
      Total Number of Cores:     2
      L2 Cache (per Core):     256 KB
      L3 Cache:     3 MB
      Memory:     4 GB
    Kindly suggets to us , 8 GB ,DDR3 1600 MHz Momary will work on same. 
    Thanks
    Ajay Kumar Gola

    http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3_1333
    I would opt for one 8 GB stick so you would have 10 GB. total. This says really no practical advantage in dual channel memory
    http://www.reddit.com/r/buildapc/comments/1fcs77/discussion_ram_single_vs_dual_c hannel_speed/

  • Moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

    moving a drive with OSX to another computer? take it out of my Mac pro laptop and into my mac mini. can it be done with no OS/Hardware issues?

    When I work with a drive to boot many computers, I use the newest model computer I will be booting, and set the system up on that, run all the Apple updates. Normally I will have no issue booting any older computer with the same drive. Unless of course those older computers do not support the operating system on that drive.
    If you want to test if the drive will boot the mac mini. Put your MacBook Pro into target mode. Connect the two computers together. And on the Mac Mini, go into system preferences and then under start up disk and see if the target disk mode computer's drive shows up there. Seelct that drive and restart. See if it boots ok. A bit easier then taking the drives out and moving things around.

  • Will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?

    hi there guys,
    will logic pro x run on my mac mini dual core intel i5 with 4gb of ram and mountain lion ?
    I'm not sure if my machine is 64 bit - it is the current model base mac mini.
    Many thanks for any help you can offer !
    Simon

    SkiJumptoes is right. 4GB is not enough to comfortably run Logic X.
    Your Mac Mini will need DDR3 SODIMM RAM. That website seems incredibly steep though. I guess that's the price of finding it for you. You're better off going to any below:
    http://www.ebuyer.com/191206-kingston-4gb-ddr3-1066mhz-laptop-memory-kvr1066d3s7 -4g?utm_source=google&utm_medium=products&gclid=COqM6KzdxbgCFcfJtAodoicARg
    http://www.ballicom.co.uk/cmso4gx3m1a1600c11-corsair-value-select--memory--4-gb- -so-dimm-204pin--ddr3--1600-mhz--pc312800--cl11--15-v--unbuffered--nonecc.p87434 0.html?ref=5&gclid=CKyej_HdxbgCFQSS3godEjwAug

  • Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3?  I need to run a custom application using Mac OS X 10.6.8.

    Can I install and boot mac os x 10.6.8 on a new mac mini model A1347 which shipped with osx 10.8.3?
    I need to run an application customized using Mac OS X 10.6.8 on this new mini.

    Hi, not normally, but you can run a Virtual Machine, using 10.6 Server  within...
    Parallels...
    http://www.parallels.com/
    VmWare Fusion...
    http://www.vmware.com/mac
    VirtualBox...
    http://www.virtualbox.org/wiki/Downloads

  • Is it possible the current Mac Mini 2.7 Ghz i7 with two full-resolution displays and Thunderbolt operate?

    Hello,
    Is it possible the current Mac Mini 2.7 Ghz i7 with two full-resolution displays and Thunderbolt operate?
    Thanxs for your answers.
    Gerald

    On Second thoughts...
    I don't really know how well Logic Express 7 performs on the Mac Mini because I have not yet had the chance to experience the two together. Don't let that put you off the idea though! From my understanding of the system requirements printed on the Logic Express homepage, it states that a G4 or faster system is required, however Apple personally recommend a Dual G4 or G5 is recommended alongside a minimum of 512MB of Ram. This Does mean that Logic Express will run on the Mac Mini but you will most probably find it lags when moving samples in real time and rendering them onto your hard drive. If you really want to enjoy making "serious" music on the Mac then you really need to be looking at the iMac G5 or the iMac Core Duo (Intel) purely for your tempers sake. As for an Intel Mac Mini, there is no indication as to when we will be seeing one on the market and therefore you may find yourself on the fence between keeping your fixed budget and holding on a little or jumping in and getting on the right road to a digital musical life - mac style.
    Maybe this will inspire your decision:
    http://www.engadget.com/2005/02/08/how-to-turn-your-mac-mini-into-a-low-cost-rec ording-studio/
    Hope this helps
    -Pos

  • Mac mini midle 2011 no network reconect

    Hi, When I need reset my ADSL router, the mac mini apear connected to network (cable based-ethernet port to router) but safari tell me there is not connected to internet.
    My mac mini network configuration is:   IP: static   the rest of parameters I think are configured correctly. address mask, dns,....
    I need restart the mac mini to gain internet access., I trie solve problem button but is not posible to connect to internet.
    The OSX versison:  Mountain lion 10.8.2
    Any Idea??

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    10.4 instructions...
    Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.

  • Final cut x on a mac mini 3,1 2.26ghz with 8gb of memory

    how can I get final cut x to work on mac mini 3,1 2.26ghz with 8gb of memory

    http://eshop.macsales.com/shop/memory/Apple_Mac_mini/DDR3_1333
    I would opt for one 8 GB stick so you would have 10 GB. total. This says really no practical advantage in dual channel memory
    http://www.reddit.com/r/buildapc/comments/1fcs77/discussion_ram_single_vs_dual_c hannel_speed/

  • Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older

    Just purchased a new mac mini 3GHz Intel Core i7, with 16GB ram version 10.10.1. With it i purchased a new wireless keyboard. All of a sudden I was not able to use the #1 key. I thought I had a defected newly purchased keyboard. I pulled out my older wireless keyboard, and the same thing happened. It must not be the keyboard if it happened to two different keyboards. I have a habit of restarting my computer, when things don't work, I find it helps, and sure enough, everything works. Today, it happened again. Does anyone know what is causing this to happen?

    Try resetting the SMC and PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    About NVRAM and PRAM
    Try reinstalling Yosemite with out losing stuff. See:
    OS X Yosemite: Reinstall OS X

  • Macbook/mac mini can ethernet connected[crossover] with another PC-windows?

    macbook / mac mini can ethernet connected crossover with another PC - windows like Sony VAIO laptop VGN-A297XP CEZ ? If yes can share all services like pc-pc connection ? IF Ethernet speed is 100/1000 for this laptop what is connection speed mac-pc ?

    If you temporarily connect the Mac Mini server to the Time Capsule (TC) by Ethernet, can it gain Internet access now? Is the Mac Mini in the same room, different room/floor from the TC?

  • My mac mini displays a green screen with 'mac os version not yet responded' and 'you need to restart your computer' as a warning message. Inspite of all my tries it doesnt run from the install dvd either.

    My mac mini displays a green screen with 'mac os version not yet responded' and 'you need to restart your computer' as a warning message. Inspite of all my tries it doesnt run from the install dvd either.
    Please help.

    Sounds like you may have a hardware problem since it won't read from DVD, and it is only a year and a half old.  Hopefully all it is, is bad RAM*:
    http://www.macmaps.com/badram.html

  • Is the mac mini g4 spost to come with the hardware test disks?

    Hi,
    Is the mac mini g4 spost to come with the hardware test disks?
    If so how do I get them?
    I did not get it when I got my mac mini?
    Thanks.

    I know that booting up while holding the D key with the Install disc in the drive will boot to the Apple Hardware Test on a Macintel, and although I haven't tried that key on my G4 yet, I believe that the proper way to select AHT as the startup volume from the Install disc is to do so from the Startup Manager (which is accessed by holding the Option key during startup) ...

  • Issues with my Mac Mini & a Linksys Wireless Network

    I have Linksys WRT54GS router hooked up to a Sprint DSL modem. Attached to the router is my homemade PC a Pentium 4 3.06 GHz HT with a Linksys wireless card installed, another homemade AMD computer connected via Ethernet, and I am attempting to get my Mac Mini on board too. The network is set to 128 Bit WEP security with a password. Both of the PCs are connected fine getting good speeds. My issue is that on the Mac when I attempt to connect it does one of the following things: (1) deems my password as invalid, (2) says there is "an error joining (network name)", (3) when I change the WEP Personal to WEP 40/128-bit hex will not allow me to type more than one character, or (4) when I change the WEP Personal to WEP 40/128-bit ACSII it either allows me to type the password and doesn't allow me to press OK or won't allow me to type a password at all. I did not attempt the LEAP because I don't know of a User name, just a password. Any suggestions on this dilema? Any help would be greatly appreciated!
    Mac Mini 1.5 GHz Power PC G4 // Homemade Pentium 4 - 3.06 GHz Windows XP Pro   Mac OS X (10.4.6)   2nd Gen iPod Mini 4 Gb Silver, 5th Gen iPod 30 Gb White

    Welcome to the Forum
    I found my Macs prefer using WPA encryption and they do this with ease. I had loads of issues when I first set up the LinkSys and attempted to use WEP, besides WPA is a lot more secure.

  • Trying to connect 2 mac mini's as a network, and sharing printers

    Hello to all. Please help me as I'm a newbie on these Mac mini's. I am trying to create a network between the two mini's and I would like to share files between them and be able to print from the upstairs mini to the printers hooked up to the downstairs mini.
    Mini 1 (downstairs) has 2 printers attached directly, a HP color laserjet and a Epson 800 Artisan
    Mini 2 (upstairs)
    Mini 1 and mini 2 are both connected via ethernet to the Netgear router.
    Here is my problem:
    on the mini 1, I can print and even access the mini 2 via sharing. I can screen share and view folders that is on the mini 2.
    However, from the mini 2 computer, I cannot get the screen share and folder sharing from the mini 1 computer. I show that it is there, but when I try to connect, I get a message that states: CONNECTION FAILED The server may no exist or it is not operation at this time. Check the server name or ip address and your network connection and try again.
    On the mini 2 I also cannot get anything to print. It doesn't even show that the printers that are supposedly shared at the other computer are present. I tried to add them, via default icon or even ip from the print and fax preferences, but I get error messages and cannot print.
    ON THE mini 2: When I used the 'default printer' icon, both of my printers showed up using bonjour shared and I 'added' them. But when I tried to print, I got a message stating:
    *Connecting to downstairs-mac-mini.local on port 631...*
    *Unable to connect to printer; will retry in 30 seconds....*
    I deleted both printers as bonjour shared and tried to make the printers an ip internet shared, and put in the ip address xxx.xxx.1.2 (mini 1 ip address) but I got a message saying that that ip address was being used. I changed the ip address to xxx.xxx.1.5 (mini 2 ip address) and it looked like it was going to print, but it automatically goes to pause. (doesn't matter which printer it is, I can't print from either. I never did get either of the printers to work on mini 2.
    I have done the following: On the mini 1, the printers are marked shared. On both computers the shared folders are marked shared, along with screen sharing. I also added all files on both computers to be shared as to who can read only or read and write.
    Also, I have also gone to the 'system' icon and on internet sharing, I have made both computers to be shared, with the appropriate check marks done on the list of services I want shared.
    ON both the mini 1 and mini 2 I have set the network to XXXXX Home and it automatically configured and states that my ethernet is connected.
    On the downstairs computer, I can see the 'shared computer, and am able to access the files.
    BUT on the other computer upstairs, I do see the downstairs computer, but it fails in the connection.
    I noticed that the ip address for each computers state the same number, except the last digit is different. xxx.xxx.1.2 for the downstairs mini and xxx.xxx.1.5 for the upstairs mini. The router number and dns server along with the subnet mask are the same numbers between both of the computers.
    I am going to set the power settings NOT to sleep when idle so that might help when I am trying to view files on each mini's.
    So right now I am stuck with how to make the upstairs mini to print on the downstairs printers, and how to see the downstairs mini on the upstairs mini display.
    Any help from anyone is very much appreciated. Sorry this is so long. Thanks in advance!

    Mini 1 Allow only essential services
    Mini 2 Allow all incoming connections
    I changed mini 1 to allow all incoming connections
    That did the trick for viewing, now will that help me on my printer issue also? YES! wahoo! Thanks so much, I would have not thought about checking the firewall.
    Kudos to you and all your help!

Maybe you are looking for